Re: [MBZ] Cooling System Flush
That's the way I do it, too. Wilton - Original Message - From: Jim Cathey j...@windwireless.net To: Mercedes Discussion List mercedes@okiebenz.com Sent: Sunday, November 25, 2012 2:02 AM Subject: Re: [MBZ] Cooling System Flush What happened? Air bubble, big one. My method is to pour the coolant into the tank, pull off the upper radiator hose and backfill water into the system until it's pouring out over my hand which is holding the bottom of the hose against the bottom of the radiator neck, but leaving a crack at the top into which to pour water. Then I jam the hose on and tighten it up. That gets rid of all the air, but what spills out is all water since the coolant hasn't really mixed yet. -- Jim ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
[MBZ] Subject: Re: Engine Vacuum Couple Hose hookup 240D [2nd request]
I drove to my buddy's garage 30 miles away to stay overnite so that I could adjust my valves on a cold engine. I have a '83 240d. When I went to hook up the black vacuum plug, all the 5 nipples broke apart. I then had to pull the hoses out the plug to directly connect them to the vacuum lever units just so I could get home. I got a new black plastic engine vacuum couple that goes on the top the valve cover. It still doesn't shift right. Could someone forward me a picture of the correct vacuum hose setup that enters into the black rubber plug? There are 5 hose connections on the exterior side.[ 6 on the inside ].Again this is for a 240D setup. You could send the pic offlist if you want. Thanks for your help.And Happy Thanksgiving everybody. Bob 1983 240d 196,500 mi Can anyone help me out ?? ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Cooling System Flush
If it is a non-turbo, you need to open the bleed screw at the thermostat housing to properly immerse the thermostat. On 2012-11-25, at 4:00, mercedes-requ...@okiebenz.com wrote: Flushed the cooling system on the 300cd today. ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Subject: Re: Engine Vacuum Couple Hose hookup 240D [2ndrequest]
I don't have a 240D now, but I've been trying to find the component in question in the EPC; unsuccessful so far. Wilton - Original Message - From: rdeaf...@aol.com To: mercedes@okiebenz.com Sent: Sunday, November 25, 2012 11:21 AM Subject: [MBZ] Subject: Re: Engine Vacuum Couple Hose hookup 240D [2ndrequest] I drove to my buddy's garage 30 miles away to stay overnite so that I could adjust my valves on a cold engine. I have a '83 240d. When I went to hook up the black vacuum plug, all the 5 nipples broke apart. I then had to pull the hoses out the plug to directly connect them to the vacuum lever units just so I could get home. I got a new black plastic engine vacuum couple that goes on the top the valve cover. It still doesn't shift right. Could someone forward me a picture of the correct vacuum hose setup that enters into the black rubber plug? There are 5 hose connections on the exterior side.[ 6 on the inside ].Again this is for a 240D setup. You could send the pic offlist if you want. Thanks for your help.And Happy Thanksgiving everybody. Bob 1983 240d 196,500 mi Can anyone help me out ?? ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Subject: Re: Engine Vacuum Couple Hose hookup 240D [2nd request]
Bob. If you have the EPC available, under 123.123 / 616.912 engine / vacuum controls are two pictures of parts that should give you some clues. Fred Moir Lynn MA Diesel preferred. From: rdeaf...@aol.com rdeaf...@aol.com To: mercedes@okiebenz.com Sent: Sunday, November 25, 2012 11:21 AM Subject: [MBZ] Subject: Re: Engine Vacuum Couple Hose hookup 240D [2nd request] I drove to my buddy's garage 30 miles away to stay overnite so that I could adjust my valves on a cold engine. I have a '83 240d. When I went to hook up the black vacuum plug, all the 5 nipples broke apart. I then had to pull the hoses out the plug to directly connect them to the vacuum lever units just so I could get home. I got a new black plastic engine vacuum couple that goes on the top the valve cover. It still doesn't shift right. Could someone forward me a picture of the correct vacuum hose setup that enters into the black rubber plug? There are 5 hose connections on the exterior side.[ 6 on the inside ].Again this is for a 240D setup. You could send the pic offlist if you want. Thanks for your help.And Happy Thanksgiving everybody. Bob 1983 240d 196,500 mi Can anyone help me out ?? ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Subject: Re: Engine Vacuum Couple Hose hookup 240D[2nd request]
Fred, are you talking about photos on pages 207 and 209 in Component Locations of the Wiring Diagrams section? I saw those, but definition/detail is extremely poor, but you're right, with actual part in hand, he MAY be able to see a clue. Bob, I'll send these, if you don't have 'em. Wilton - Original Message - From: Frederick Moir fredy4.s...@yahoo.com To: Mercedes Discussion List mercedes@okiebenz.com Sent: Sunday, November 25, 2012 12:49 PM Subject: Re: [MBZ] Subject: Re: Engine Vacuum Couple Hose hookup 240D[2nd request] Bob. If you have the EPC available, under 123.123 / 616.912 engine / vacuum controls are two pictures of parts that should give you some clues. Fred Moir Lynn MA Diesel preferred. From: rdeaf...@aol.com rdeaf...@aol.com To: mercedes@okiebenz.com Sent: Sunday, November 25, 2012 11:21 AM Subject: [MBZ] Subject: Re: Engine Vacuum Couple Hose hookup 240D [2nd request] I drove to my buddy's garage 30 miles away to stay overnite so that I could adjust my valves on a cold engine. I have a '83 240d. When I went to hook up the black vacuum plug, all the 5 nipples broke apart. I then had to pull the hoses out the plug to directly connect them to the vacuum lever units just so I could get home. I got a new black plastic engine vacuum couple that goes on the top the valve cover. It still doesn't shift right. Could someone forward me a picture of the correct vacuum hose setup that enters into the black rubber plug? There are 5 hose connections on the exterior side.[ 6 on the inside ].Again this is for a 240D setup. You could send the pic offlist if you want. Thanks for your help.And Happy Thanksgiving everybody. Bob 1983 240d 196,500 mi Can anyone help me out ?? ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Subject: Re: Engine Vacuum Couple Hose hookup 240D[2ndrequest]
I sent 'em. Wilton - Original Message - From: WILTON wilt...@nc.rr.com To: Mercedes Discussion List mercedes@okiebenz.com Sent: Sunday, November 25, 2012 2:06 PM Subject: Re: [MBZ] Subject: Re: Engine Vacuum Couple Hose hookup 240D[2ndrequest] Fred, are you talking about photos on pages 207 and 209 in Component Locations of the Wiring Diagrams section? I saw those, but definition/detail is extremely poor, but you're right, with actual part in hand, he MAY be able to see a clue. Bob, I'll send these, if you don't have 'em. Wilton - Original Message - From: Frederick Moir fredy4.s...@yahoo.com To: Mercedes Discussion List mercedes@okiebenz.com Sent: Sunday, November 25, 2012 12:49 PM Subject: Re: [MBZ] Subject: Re: Engine Vacuum Couple Hose hookup 240D[2nd request] Bob. If you have the EPC available, under 123.123 / 616.912 engine / vacuum controls are two pictures of parts that should give you some clues. Fred Moir Lynn MA Diesel preferred. From: rdeaf...@aol.com rdeaf...@aol.com To: mercedes@okiebenz.com Sent: Sunday, November 25, 2012 11:21 AM Subject: [MBZ] Subject: Re: Engine Vacuum Couple Hose hookup 240D [2nd request] I drove to my buddy's garage 30 miles away to stay overnite so that I could adjust my valves on a cold engine. I have a '83 240d. When I went to hook up the black vacuum plug, all the 5 nipples broke apart. I then had to pull the hoses out the plug to directly connect them to the vacuum lever units just so I could get home. I got a new black plastic engine vacuum couple that goes on the top the valve cover. It still doesn't shift right. Could someone forward me a picture of the correct vacuum hose setup that enters into the black rubber plug? There are 5 hose connections on the exterior side.[ 6 on the inside ].Again this is for a 240D setup. You could send the pic offlist if you want. Thanks for your help.And Happy Thanksgiving everybody. Bob 1983 240d 196,500 mi Can anyone help me out ?? ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Subject: Re: Engine Vacuum Couple Hose hookup 240D [2nd request]
On Sun, 25 Nov 2012 11:21:26 -0500 (EST) rdeaf...@aol.com wrote: Can anyone help me out ?? Bob, I sent you all the information I have on W123 vacuum systems, in a 566 kB ZIP file. Craig ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
[MBZ] more 1982 300td drama
thanks, xx rick Rick Hawkins Folks, Lately my 300TD has been running well. I drove it down to Tybee Island, last weekend, dragging a trailer. It ran well. I moved a machine in Savannah, last week and returned the 240 miles to athens, last night. It was getting below 40 f by the time i was about an hour out of Athens, so i topped my WVO off with about 5 gals of #2, cheaply at $3.80/gal at I-20 and Thompson. It all ran well. I only saw 4 or 5 deer in about 5 hours of driving after dark. I hadn't gotten around to replacing my antifreeze (with the correct G05, of course) yet, since a blown off hose this summer, so i was running straight water (at 80c or so). When i got home, i pulled the lower radiator hose and dumped all the water on the ground since we were to have a low of something like 25F last night. When i did that, i noticed some fuel around the injectors and return lines. This afternoon, i installed the new coolant. I also replaced a leaking return line on the #5 injector (that's the rear one?). I noticed two odd things. First with the heat set in full hot (red on the wheel) and the button to the right of defrost pushed in, not only was the heater working, but the a/c compressor was also running odd. OFF on the climate control turns it off, but no other position seems to. I just unplugged the power line to the compressor. I have resoldered the climate control unit, but it was a few years back. A/C works fine, i used it this week in SAV. ODD. Ideas? More seriously, i noticed a dripping of fuel around the rear of the engine in the vicinity of the rear of the engine. I didn't crawl under since i hurt my back moving the Ludlow Typograph in Sav. Is there likely to be a puddle of fuel somewhere or another place for things to leak. I checked the lines etc on the the side of the IP, but the drip is further back than that. So this is my thanksgiving travel report. I hope y'all had successful trips www.javaphoto.com www.javacycles.com LETTERPRESSES FOR SALE www.ricktheprinter.com www.letterpressmachinery.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] more 1982 300td drama
First with the heat set in full hot (red on the wheel) and the button to the right of defrost pushed in, not only was the heater working, but the a/c compressor was also running odd. Exactly as TFM tell you. AC is ON with the left-most three buttons, and OFF for the right-most two. -- Jim ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Subject: Re: Engine Vacuum Couple Hose hookup 240D [2nd request]
Craig wrote: I sent you all the information I have on W123 vacuum systems, in a 566 kB ZIP file. Me too, please? Thanks. mao ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Cooling System Flush and burp
Don't these engines have a bolt in the head to 'burp' the engine, my M103 has one that needs to be undone whilst filling with coolant. Hendrik who is self burping On 25/11/12 17:32, Jim Cathey wrote: What happened? Air bubble, big one. My method is to pour the coolant into the tank, pull off the upper radiator hose and backfill water into the system until it's pouring out over my hand which is holding the bottom of the hose against the bottom of the radiator neck, but leaving a crack at the top into which to pour water. Then I jam the hose on and tighten it up. That gets rid of all the air, but what spills out is all water since the coolant hasn't really mixed yet. -- Jim ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] BenzPr0n
Even the Stig was there. Hendrik who is not the Stig On 25/11/12 01:52, Rich Thomas wrote: http://www.youtube.com/watch?v=E4AGoGBfQe8feature=youtu.be --R ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Chuffed old chap!
According to this http://en.wikipedia.org/wiki/Wheeler_Dealers they do make losses on some deals. Hendrik who always looses out on cars On 23/11/12 14:29, OK Don wrote: The TV show is the point, not the profit from selling a car -- On Thu, Nov 22, 2012 at 7:56 PM, dsereta...@yahoo.com wrote: Yeah they make a thousand or so profit for a week of work. Not worth it. ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] BenzPr0n
I did not see him (or her)! --R On 11/25/12 6:42 PM, Hendrik Fay wrote: Even the Stig was there. Hendrik who is not the Stig On 25/11/12 01:52, Rich Thomas wrote: http://www.youtube.com/watch?v=E4AGoGBfQe8feature=youtu.be --R ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Chuffed old chap!
your a looser --R On 11/25/12 7:13 PM, Hendrik Fay wrote: According to this http://en.wikipedia.org/wiki/Wheeler_Dealers they do make losses on some deals. Hendrik who always looses out on cars On 23/11/12 14:29, OK Don wrote: The TV show is the point, not the profit from selling a car -- On Thu, Nov 22, 2012 at 7:56 PM, dsereta...@yahoo.com wrote: Yeah they make a thousand or so profit for a week of work. Not worth it. ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Cooling System Flush
The other thing to remember is to make sure that you install the thermostat with the air bleeder on the top. I've never had a problem with air bubbles when installing the thermostat that way. Probably I'm just very lucky. :-) Manfred Date: Sun, 25 Nov 2012 10:14:28 -0500 From: WILTON wilt...@nc.rr.com Subject: Re: [MBZ] Cooling System Flush That's the way I do it, too. Wilton ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] BenzPr0n
Henny's not the only one who was thinking Stig at 0:18. Rich Thomas wrote: I did not see him (or her)! --R On 11/25/12 6:42 PM, Hendrik Fay wrote: Even the Stig was there. Hendrik who is not the Stig On 25/11/12 01:52, Rich Thomas wrote: http://www.youtube.com/watch?v=E4AGoGBfQe8feature=youtu.be ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Cooling System Flush
On Nov 24, 2012 11:03 PM, Jim Cathey j...@windwireless.net wrote:My method is to pour the coolant into the tank, pull off the upper radiator hose and backfill water into the system until it's pouring out over my hand which is holding the bottom of the hose against the bottom of the radiator neck, but leaving a crack at the top into which to pour water. Then I jam the hose on and tighten it up. That gets rid of all the air, but what spills out is all water since the coolant hasn't really mixed yet. Where does the special tool, aka thermostat modified with shell casing, come into it? Alex ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Cooling System Flush
When doing a citric acid treatment. On 11/25/2012 20:44, Alex Chamberlain wrote: On Nov 24, 2012 11:03 PM, Jim Cathey j...@windwireless.net wrote:My method is to pour the coolant into the tank, pull off the upper radiator hose and backfill water into the system until it's pouring out over my hand which is holding the bottom of the hose against the bottom of the radiator neck, but leaving a crack at the top into which to pour water. Then I jam the hose on and tighten it up. That gets rid of all the air, but what spills out is all water since the coolant hasn't really mixed yet. Where does the special tool, aka thermostat modified with shell casing, come into it? Alex ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com - No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2221 / Virus Database: 2629/5419 - Release Date: 11/25/12 ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Gl and the deer
Dan Penoff wrote: A moose once bit my sister I knew it... I _knew_ it!! I just knew it was going to come up!!! It's Friday somewhere - right? -- Philip ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Subject: Re: Engine Vacuum Couple Hose hookup 240D [2nd request]
On Sun, 25 Nov 2012 16:58:17 -0600 Mountain Man maontin@gmail.com wrote: Me too, please? Thanks. mao It's coming at you, offlist. Craig ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Gl and the deer
No, no! She got better. Dan But I don't want to go on the cart On Nov 21, 2012, at 12:42 PM, Fmiser wrote: Dan Penoff wrote: A moose once bit my sister I knew it... I _knew_ it!! I just knew it was going to come up!!! It's Friday somewhere - right? -- Philip ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
[MBZ] It's Friday somewhere - right?
Pie Jesu domine Dona eis requiem Clonk! Fred Moir Lynn MA Diesel preferred. From: Dan Penoff d...@penoff.com To: Mercedes Discussion List mercedes@okiebenz.com Sent: Sunday, November 25, 2012 11:14 PM Subject: Re: [MBZ] Gl and the deer No, no! She got better. Dan But I don't want to go on the cart On Nov 21, 2012, at 12:42 PM, Fmiser wrote: Dan Penoff wrote: A moose once bit my sister I knew it... I _knew_ it!! I just knew it was going to come up!!! It's Friday somewhere - right? -- Philip ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Stigy BenzPr0n
And again at 1.14 but what would I know. Hendrik who is blind in one eye and can't see out the other On 26/11/12 12:17, Mitch Haley wrote: Henny's not the only one who was thinking Stig at 0:18. Rich Thomas wrote: I did not see him (or her)! --R On 11/25/12 6:42 PM, Hendrik Fay wrote: Even the Stig was there. Hendrik who is not the Stig ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Cooling System Flush and burp
IIRC, the OM615 had one, the OM 616 and 617 did not. The OM601 and 603 did not. The M117 did. On Sun, Nov 25, 2012 at 5:38 PM, Hendrik Fay heni...@ozemail.com.auwrote: Don't these engines have a bolt in the head to 'burp' the engine, my M103 has one that needs to be undone whilst filling with coolant. Hendrik who is self burping -- OK Don 2001 ML320 2012 Passat TDI DSG 1997 Plymouth Grand Voyager 1957 C182A ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] more 1982 300td drama
Fuel leak at the rear is either a hose, or the fuel return lines or ending plug. Should be changed annually or every other year at least. First with the heat set in full hot (red on the wheel) and the button to the right of defrost pushed in, not only was the heater working, but the a/c compressor was also running odd. Exactly as TFM tell you. AC is ON with the left-most three buttons, and OFF for the right-most two. -- Jim ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
