Re: [MBZ] OT: Carbide Cannons and exploding Oldsmobiles

2008-02-26 Thread JFreezn
In a message dated 2/26/2008 5:07:35 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Some genius was going to detonate a huge acetylene balloon at a Super Bowl party this year, but it spontaneously combusted in the car on the way there: http://www.thedenverchannel.com/news/6790966

Re: [MBZ] 240D Cylinder Head Removal/addendum?

2008-02-26 Thread JFreezn
In a message dated 2/23/2008 11:39:36 A.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Set to TDC, wire tie the cam sprocket to the chain, then use a bar through the holes in the sprocket to loosen the cam bolt. Remove chain tensioner, slide cam sproket off cam, and lower sproc

Re: [MBZ] ABS sensor question

2008-02-25 Thread jfreezn
The pigtail on the spare 87 differential that I have is about a foot long.? The sensor screws into the diff' near the input coupling.? Under the car you go!? The ABS brain is forward of the shifter, under the center console, on this era junk cars I have seen, so crawling under the car may be you

Re: [MBZ] Car maintenance tip of the day

2008-02-19 Thread JFreezn
In a message dated 2/19/2008 8:02:48 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: the ex wife calls me asking what sort of coolant to buy at pep boys. so i tell her to get teh correct spec fluid for $14 a bottle. she made the mistake of mentioning this to a coworker, who explai

Re: [MBZ] Window switch primer

2008-02-18 Thread jfreezn
Casey, what Jim C said is true whenever you have 2 switches that operate the same window.? It would not be true for the front windows, operated from a CENTER console Jim in phoenix So, one bad switch will cause a non-functioning situation--is that right? Well then, I'd best take them apart--b

Re: [MBZ] 1988 190-E - Questions please.

2008-02-18 Thread JFreezn
In a message dated 2/17/2008 11:25:27 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: There's a 1988 190-E for sale locally. Description is "clean" but don't have all the particulars except mileage is 180K, automatic. I'm not familiar with the "gassers." Trying to help my boss fi

Re: [MBZ] NOW Opacity Test What Should I Start Amassing?

2008-02-17 Thread jfreezn
Bob, I would start amassing quantities of good, but cheap oil.? (Checker is having a sale tomorow on Pennzoil @99cents/qt, after rebate.? Next oil change, I would switch?to a 20W-50 oil as long as it starts easily.? When you get down to using a quart every 250 miles, it will still pass smog,

Re: [MBZ] Aerial view test

2008-02-16 Thread jfreezn
I missed two of 16 Jim in Phoenix -Original Message- From: Kaleb C. Striplin <[EMAIL PROTECTED]> To: Mercedes Discussion List Sent: Sat, 16 Feb 2008 9:03 am Subject: Re: [MBZ] Aerial view test I got 14 out of 16 right. [EMAIL PROTECTED] wrote: > Try this aerial test > > www.gue

Re: [MBZ] Seat Belt Q

2008-02-13 Thread jfreezn
I am pretty sure these belts use an explosive charge, in the winder,?to pre-tension the belts in a collision.? My guess is they are a one time use (like an airbag) and at least part of them must be repaced.? Demand may have exceeded availability. Jim in Phoenix Friends have an 01 (I think) E4

Re: [MBZ] OT: CHevy 265/283/302/305/350/366/400/427 small blocks

2008-02-13 Thread jfreezn
the Corvette Z06, released in 2006, is powered by an LS7, a?427 inch variation of the 265 inch small block, as well.? Producing 505 HP, it?was the only production?car over 400 HP to avoid the gas guzzler tax. The "400" badged cars of the 70s could have been either a small block, or a smog vers

Re: [MBZ] High mileage badges, also Lapel badges

2008-02-09 Thread jfreezn
Ask about the form for getting a lapel stickpin for your total mileage driven in all your Mercedes cars.? I got one somewhere-- Jim in Phoenix For Hi Mileage Badges from MBUSA, there is no verification needed. One need only call Montvale (1-800-FOR-MERCEDES (1-800-367-6372)) and ask about

Re: [MBZ] Clean Oil Off Driveway

2008-02-09 Thread JFreezn
In a message dated 2/9/2008 9:25:38 A.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: What is the best thing/stuff to use to clean oil drips off of the driveway? Landlord boy came over yesterday to trim an unruly Palo Verde and his wife about busted a vein when she saw the few drips

Re: [MBZ] e: OT old Chevettes --funny

2008-02-08 Thread JFreezn
In a message dated 2/8/2008 8:14:24 A.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: My mother STILL TO THIS DAY thinks it was divine intervention to get back at them for selling us that car. Don't tell her about the fuel filter. My brother and I have never told her. Very, v

[MBZ] TEST

2008-02-05 Thread jfreezn
More new features than ever. Check out the new AOL Mail ! - http://webmail.aol.com ___ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used

Re: [MBZ] Fuel vacuum again?

2008-01-26 Thread JFreezn
I have heard stories of wasps mudding up the vent on diesel fuel tanks, could be repeatable because some bees home back to the same place again and again. Or if you drive over freshly irrigated ground, you might be clogging the vent, which hangs down at the front center of the tank and h

Re: [MBZ] What's in hydraulic jack oil?

2008-01-24 Thread JFreezn
In a message dated 1/24/2008 10:56:53 A.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: What's in hydraulic jack oil that makes it special? Is it more like motor oil, or more like ATF? Out of desperation I put some motor oil from a random bottle lying around into an old jack that

Re: [MBZ] Running on empty/BTDT!

2008-01-24 Thread jfreezn
Peter, and all, I have run out of fuel in my diesels several times over the last 35 years, both on purpose, and not!? If you cut the engine at the very first stumble, it will restart quite easily, no priming pump needed, after fuel is added.? If you try to milk it, sway the car to slosh the rem

Re: [MBZ] speedometer

2008-01-17 Thread JFreezn
In a message dated 1/17/2008 2:30:12 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: The tires are the normal 14" found on every 300d I've ever seen. The tach reads 3000 rpm when the GPS says 70mph. I'm thinking the drive cable is not turning fast enough. I think this cable is

Re: [MBZ] Oil Consumption

2008-01-16 Thread JFreezn
In a message dated 1/16/2008 7:23:38 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: So..I'm consistently at 1 qt of oil burned (not leaked at all) every 630 mile these days. Should I be concerned? Bob, I would like to know where it is going if I am using that much. Check t

Re: [MBZ] 300 SD 722-303 transmission trouble/pull fuse

2008-01-16 Thread JFreezn
In a message dated 1/16/2008 5:57:49 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: It tops out at about 25 mph. The switch is free and works. Just to confirm, you can pull the fuse to the transmission kick down circuit. Cheap and esay! Jim Friesen Phoenix AZ 79 300SD,

Re: [MBZ] Valve cover vent tube popping off

2008-01-14 Thread JFreezn
In a message dated 1/14/2008 9:30:15 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Lately I've found the vent tube (the flat tube between the valve cover and air cleaner) on my 300D is prone to popping off. There's a little oily circle on the hood pad now as a result. I've

Re: [MBZ] Which six?

2008-01-13 Thread JFreezn
In a message dated 1/13/2008 6:24:56 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: The 3.0 Liter Inline 6 cylinder M103 engine (much more reliable than the > M104) ...>> > Absolute nonsense. The M104 is better in many ways. RLE Opinions are like A--holes, everyone has one!

Re: [MBZ] 1977 280E QUESTIONS was 123 Gasser for Dan

2008-01-10 Thread JFreezn
The US version of the 280E had twin cams and fuel injection. Make sure your Euro has the same. I would not want a carbureted version, which was often hard to tune. Some 280s were also made in the 116 chassis. Both very solid. So, I'm pretty interested in the car below. Have emailed and

Re: [MBZ] Mobil 1 ATF fluid

2008-01-09 Thread JFreezn
In a message dated 1/9/2008 2:27:53 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Hi Everyone, Quick question, mobil 1 ATF synth is the right fluid for '88 300E with Auto box?? Absolutely, I use it in all my cars, including the 5 speed auto in my ML320, which calls for the

Re: [MBZ] OT: 94 Bonneville was Request for a Car FAX/more input

2008-01-09 Thread JFreezn
In a message dated 1/9/2008 12:09:20 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: You will have to replace the alternator about every 50,000 miles and the water pump every 60-75,000. You should service the transmission every 50,000 miles. But, other than that it will be a gr

Re: [MBZ] OT: more furnace woes

2008-01-07 Thread JFreezn
In a message dated 1/7/2008 1:10:56 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Well none of the electrical supply stores here will give me the time of day because I'm not in the electrical or HVAC trade. Graingers and Johnstone are two wholesalers that will take your cash,

[MBZ] OT/ my nephew

2008-01-06 Thread jfreezn
Hey Mr. Jim...was the Tim that was on earlier today related to you? Bob R Bob/Chuck/Kaleb, Yes, Tim Friesen is my 40 year old nephew.? When I sent the errant message about the Dakar rally to the list, I copied Tim, and my brother, Tom (Tim's Dad), and my son, Eric.? Tim must have hit "reply to

Re: [MBZ] OT: more furnace woes

2008-01-06 Thread jfreezn
Allan, The motor may?use an external capacitor mounted near it, which could be your problem.? If the fan motor has 3 wires and runs at 208 to 240 volts, follow each wire until it leads you to a capacitor.? Take the capacitor with you for testing.? Jim in Phoenix -Original Message- Fr

Re: [MBZ] I'm in The Wrong Business...A Fresh Alignment...Jacks

2008-01-05 Thread jfreezn
Bob, Sounds like he might have got you for an extra $100, or more.? Maybe they got your bill ?mixed up with some guy that works at a nuclear power plant where $100 is about 1/2 hour's overtime.? ?? Shame on them! I called bushings first! Jim in Phoenix -Original Message- From: Robert

Re: [MBZ] Today's OM 603 adventure

2008-01-05 Thread jfreezn
This crud is on the front of the radiator, but behind the AC condenser, right?? Where you can't see it, and you really can't blow it out!? I have been advocating the pulling of the radiator every 6 to 8 years, especially you guys that drive where the bugs live, and the deer and the antelope play

Re: [MBZ] I'm in The Wrong Business...A Fresh Alignment...Jacks

2008-01-05 Thread JFreezn
In a message dated 1/5/2008 8:02:50 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Chuck, Mr. Jim Got the old girl aligned at Jacks on Thomas at 29th St.the place Bud mentioned. Had him do the upper bushings and the steering damper and then an alignment. I supplied the steerin

Re: [MBZ] Florida rodbender

2008-01-05 Thread JFreezn
In a message dated 1/5/2008 8:23:07 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: On Jan 5, 2008, at 10:18 PM, dave walton wrote: > It was listed as an SD, not an SDL. > That's true but the Florida SDL makes no mention of the engine being replaced, which the North Carolina S

Re: [MBZ] Florida rodbender

2008-01-05 Thread JFreezn
In a message dated 1/5/2008 7:57:48 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Hm munged link try this. http://tinyurl.com/32blka On Jan 5, 2008, at 9:55 PM, Allan Streib wrote: > http://cgi.ebay.com/ebaymotors/1991-Mercedes-Benz-350-SDL-Turbo- > Diesel-Sedan- > Clean_W0

Re: [MBZ] OT Dakar Rally

2008-01-05 Thread jfreezn
Thanks, Chuck, I am on the VS channel's mailing list and they?sent the notice out today.? It sure looks like it is canceled! Jim -Original Message- From: Chuck Landenberger <[EMAIL PROTECTED]> To: Mercedes Discussion List Sent: Sat, 5 Jan 2008 6:52 pm Subject: Re: [MBZ] OT Dakar Rally

Re: [MBZ] OT

2008-01-05 Thread jfreezn
Dakar rally starts tomorrow on VS channel, 3:30pm eastern time. Check your listings More new features than ever. Check out the new AOL Mail ! - http://webmail.aol.com ___ http://www.o

Re: [MBZ] correct tire size for '83 300D?

2008-01-02 Thread JFreezn
In a message dated 1/2/2008 3:28:37 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Needing new tires, and thinking that since my speedo reads a little fast, maybe I have the wrong size on there currently. What is the correct size for an '83 300D, with the stock bundt wheels?

Re: [MBZ] 300D Front end Alignment

2008-01-02 Thread JFreezn
In a message dated 1/2/2008 4:18:55 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Mr. Jim, Chuck Have either of you guys dealt with Jack's Alignment at 28th St and Thomas? That's where Bud sends people. Bob/Chuck, I did my upper control arm bushings with a floor jack.

Re: [MBZ] 300D Front end Alignment

2008-01-02 Thread JFreezn
In a message dated 1/2/2008 2:42:10 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Since I've worn out the inside of the front tires (Michelin Dynasty, 68K miles on them...sweet) I'm going for an alignment Friday morning. Historically, from all y'alls experience, what will he te

Re: [MBZ] O.T. '08 Z4 Raffle on My Birfday/wish me luck!

2007-12-31 Thread JFreezn
In a message dated 12/31/2007 10:59:01 A.M. US Mountain Standard Tim, [EMAIL PROTECTED] writes: One of the local school districts is hold a raffle for an '08 Z4 to be drawn on my birthday. Seems like an omen.. http://www.winthebmw.com/ Bob, and all, This is one of my favorite charit

Re: [MBZ] 60x with broken chain and cam

2007-12-31 Thread JFreezn
In a message dated 12/30/2007 6:44:50 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: So what are the chances that a 602 that broke the chain and broke the cam does NOT have bent valves? Is is possible that the cam broke instead of bending a valve? Thinking maybe just replacin

Re: [MBZ] OT: Check out Disappearing Car Door

2007-12-29 Thread JFreezn
In a message dated 12/29/2007 2:50:12 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Jim, When are you going to install them on the 300SD? Chuck, I am sorry to report that I did not have the winning ticket to last night's million dollar lottery drawings. So this project wil

[MBZ] OT: Check out Disappearing Car Door

2007-12-29 Thread JFreezn
_Click here: Disappearing Car Door_ (http://www.disappearing-car-door.com/) Jim Friesen Phoenix AZ 79 300SD, 264 K miles 98 ML 320, 152 K miles **See AOL's top rated recipes (http://food.aol.com/top-rated-recipes?NCID=aoltop000304) ___

[MBZ] OTL Rollaway doors

2007-12-29 Thread JFreezn
_http://www.disappearing-car-door.com_ (http://www.disappearing-car-door.com) This is a video Jim Friesen Phoenix AZ 79 300SD, 264 K miles 98 ML 320, 152 K miles **See AOL's top rated recipes (http://food.aol.com/top-rated-recipes?NCID=aoltop0003000

[MBZ] Fwd: German technology

2007-12-29 Thread JFreezn
Jim Friesen Phoenix AZ 79 300SD, 264 K miles 98 ML 320, 152 K miles **See AOL's top rated recipes (http://food.aol.com/top-rated-recipes?NCID=aoltop000304) -- next part -- An embedded message was scrubbed... From: [EMAIL P

Re: [MBZ] Autozone M1 5w40

2007-12-29 Thread jfreezn
Curt and all, Using your Autozone Rewards card for purchases over $20 gets you a discount of sorts! Jim in Phoenix -Original Message- From: Curt Raymond <[EMAIL PROTECTED]> To: Diesel List Sent: Sat, 29 Dec 2007 8:14 am Subject: [MBZ] Autozone M1 5w40 So a couple weeks ago I stoppe

Re: [MBZ] copper thieves

2007-12-23 Thread JFreezn
Commercial battery shops like Interstate, will make up any cable config you specify. Also, the golf cart battery places typically use heavier cables with the 6 volt batteries. Jim Friesen Phoenix AZ 79 300SD, 264 K miles 98 ML 320, 152 K miles In a message dated 12/23/2007 2:21:24

Re: [MBZ] Harrowing and/OT: now left foot brakers/Chuck

2007-12-22 Thread JFreezn
<> Chuck, I did start out by saying I hate left foot brakers, then I changed it to avoid personal connotations. My daughter is a left foot braker, as are most type A personalities, some of whom, I actually like! Ya, we definitely have to do lunch and get caught up. Jim Friesen P

Re: [MBZ] Harrowing and/OT: now left foot brakers

2007-12-21 Thread JFreezn
In a message dated 12/21/2007 8:21:53 A.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Using one foot forces you to RELEASE the throttle when you engage the brake. If you put the brake where the clutch is supposed to be, then people who are accustomed to a manual transmission woul

Re: [MBZ] copper thieves/copper scavenging is not new!

2007-12-20 Thread JFreezn
In a message dated 12/20/2007 10:15:03 A.M. US Mountain Standard Tim, [EMAIL PROTECTED] writes: Copper stealing probably takes a lot of work considering the profit also. Risk of getting caught would seem high also - although those on this list seem to keep getting hit - Back in 67, I

Re: [MBZ] Another door problem and some door talk

2007-12-19 Thread JFreezn
In a message dated 12/19/2007 3:47:06 A.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Here's a question: In our 190D, the driver's door does not have that pleasing "stop" in its travel. You know, that feature that allows you to open it halfway and have it stay there, and helps kee

[MBZ] OT: How fast do you have to go to get a whole deer under the hood?

2007-12-15 Thread JFreezn
The recent deer discussions bring this more meaning! How fast do you have to go to get a whole deer under the hood? Jim Friesen Phoenix AZ 79 300SD, 264 K miles 98 ML 320, 152 K miles **See AOL's top rated recipes (htt

Re: [MBZ] 240D idling all day/compression(engine) braking revisited

2007-12-14 Thread JFreezn
In a message dated 12/13/2007 2:25:22 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: It seems than at Wed, 12 Dec 2007 23:43:09 EST, [EMAIL PROTECTED] wrote: > I had a 74 240D (stick, dark blue) on the West Coast. We used to take it > skiing in the Sierras and I began to lea

Re: [MBZ] Emergency House Heat/240D idling all day fuel consumption

2007-12-12 Thread JFreezn
In a message dated 12/12/2007 9:48:26 A.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: A friend bought a 74 240D on the west coast and drove it home to Winnipeg. He stopped the first night in Idaho and it wouldn't start in the morning. A new glow plug and he was on his way. The n

Re: [MBZ] MB Diesel Powered Grand Cherokee/Autoweek comments

2007-12-10 Thread JFreezn
In a message dated 12/10/2007 8:13:03 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: An 05 CDI is still out of my price range, plus I load the 01 Grand Cherokee with 1200 - 1400 of stuff from one of my suppliers every time I visit the "Great White North". The weight drops the heigh

Re: [MBZ] [OT] Iced up Vette

2007-12-09 Thread JFreezn
Wilton's story reminded me of an icing up that occurred around Christmas of 1962. We were stationed in Vallejo, CA for 6 months of Navy Nuc school (class of 62-4) and decided to visit my family in Alhambra, CA. My wife and were driving our only car, a 54 Corvette with a heavily modified 32

Re: [MBZ] Moosemount!

2007-12-08 Thread JFreezn
In a message dated 12/8/2007 3:12:24 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Hey guys. Try this... http://www.snopes.com/photos/animals/ moosemount.asp For all you moose lovers out there. Chuck and all, I got to it by going to snopes.com t

Re: [MBZ] Motor Week on Speed Testing Dodge Sprinter this week

2007-12-07 Thread jfreezn
I?guess?I will know better AFTER I watch the show -Original Message- From: [EMAIL PROTECTED] To: mercedes@okiebenz.com Sent: Thu, 6 Dec 2007 11:10 pm Subject: Re: [MBZ] Motor Week on Speed Testing Dodge Sprinter this week First play will be at 08:30 MST on Friday. Check your local lis

Re: [MBZ] Motor Week on Speed Testing Dodge Sprinter this week

2007-12-06 Thread JFreezn
First play will be at 08:30 MST on Friday. Check your local listings or log on to the speed channel to see when the replays are. The Sprinter carries an inline 6 cylinder turbo diesel made by Mercedes (token MB content). More and more of these are showing up on the used market, mostly due

Re: [MBZ] My stupid question of the day..

2007-12-05 Thread JFreezn
In a message dated 12/5/2007 9:35:40 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Cosmetics aren't the greatest of my concern but the interior moldings around windows (plastic/vinyl matching the interior color) are all distorted from age and sun. Seems to be typical of most of t

[MBZ] MB Diesel Powered Grand Cherokee

2007-12-05 Thread jfreezn
It will use the MB 3 litre turbocharged CDI V6, an all aluminum engine, producing 367 ft-lbs of torque.? It was announced for delivery last Spring, but demand for the engine (ML,G-Wagon, etc) has delayed deliveries.? At the Phoenix new car show,I saw a sign on a post in the jeep area, but the sa

Re: [MBZ] marshall booth photo/banned

2007-12-03 Thread JFreezn
In a message dated 12/3/2007 5:36:46 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Marshall was 100 percent about his "factory knows best" statement with one exception. And that is when newer technology is an improvement. A good example is Mobil 1 oil which did not exist when mo

Re: [MBZ] No boost in '91 300d

2007-12-02 Thread JFreezn
In a message dated 12/2/2007 8:41:32 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: My questions: - With the added systems is there an electrical element added to the injection pump that would prevent enrichment when jumpering the intake to ALDA? - Does anyone have a used Garret

Re: [MBZ] '02 C230 Sports Coupe

2007-12-01 Thread jfreezn
Bob, Nice car!? I really like the spit sun roof look--should be stronger in a rollover,too.? Price seems fair for a $30,000 car. Jim in Phoenix (what is this wet stuff falling from the sky?) -Original Message- From: Robert Rentfro <[EMAIL PROTECTED]> To: Mercedes Discussion

Re: [MBZ] Cruise Control W124

2007-11-26 Thread JFreezn
In a message dated 11/26/2007 11:33:20 A.M. US Mountain Standard Tim, [EMAIL PROTECTED] writes: My 91 300D 2.5T Cruise Control usually works fine - my wife drives ~110 miles round trip to and from work each workday and uses the Cruise Control most of the time. Last night when driving home

Re: [MBZ] EPC hardware/Successful Search

2007-11-25 Thread JFreezn
In a message dated 11/24/2007 8:57:58 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Was that Java 6 you downloaded? They do say Java 6 is not supported, but since it's the latest version of Java ... Craig, and all, Yup, Java 6, another program supposedly too new to work on t

Re: [MBZ] EPC hardware/Successful Search

2007-11-24 Thread jfreezn
I am running Vista Premium and just downloaded the latest version of JAVA to? run the EPC.? My first search was to run the part number of a vacuum pump which I got from an 85 190E 2.3.? I got 28 hits world wide on chassis (201, 126, 124, etc)?applications,and close to?a 60 model applications.? T

[MBZ] EPC hardware

2007-11-23 Thread jfreezn
just read that the "free" EPC does?not run on Vista, nor IE7 or newer.? Jim in Phoenix Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com ___ http

Re: [MBZ] Official online EPC is now free

2007-11-23 Thread JFreezn
In a message dated 11/23/2007 9:11:29 A.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: You may have already heard about this, but just in case: https://epc.startekinfo.com/epc/coverage.jsp Dave, Thanks for the info. This is the first I have seen it mentioned on any list

Re: [MBZ] ML optimism/my ML experience

2007-11-12 Thread JFreezn
In a message dated 11/12/2007 10:13:11 A.M. US Mountain Standard Tim, [EMAIL PROTECTED] writes: There is no instant mpg readout on the MB system. There are 2 average mpg readouts...one is for the mpg since you reset the odo and the other is for the particular trip you are currently running.

Re: [MBZ] Will 617 and 603 operate at compression of 15 bar

2007-11-12 Thread JFreezn
In a message dated 11/12/2007 2:22:28 A.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Did compression test on my 124 and I getting an even 15 bar all round. Had the gauge itself ( without non-return valve ) tested and it actually was slightly overreading ! The question is will th

Re: [MBZ] Vacuum leaks 1980 300D/tools needed

2007-11-10 Thread JFreezn
In a message dated 11/9/2007 8:53:33 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Alright I have the climate control working now. Though I have a need to repair the vacuum leaks that are present in the car I know that both the door system and the climate leaks. What do all

Re: [MBZ] this thing could taco at any moment

2007-11-08 Thread JFreezn
In a message dated 11/8/2007 4:01:45 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: just never heard it used as a verb, nor had I considered a CAR folding in on itself. LOL! kind of like Google is now a verb..Kaleb could have said it could "pull an el foldo" but Kaleb is a m

Re: [MBZ] ATF cooler HOSE install question

2007-11-07 Thread JFreezn
In a message dated 11/7/2007 12:15:09 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: will be installing a new set of ATF cooler hoses this weekend. Do the threads need to be treated in any way? tape? threadlocker? Chris, I would reply exactly as Mitch did. Dissimilar metal

Re: [MBZ] Master cylinder changing/bleeding

2007-11-07 Thread JFreezn
In a message dated 11/7/2007 6:50:14 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: So after messing around to check the vacuum on the 79 TDs brakes, I finally figured it must be the master cylinder (as someone suggested, but I needed to check the vac anyway). So I have the ne

Re: [MBZ] O.T. Acura's Cold Tapping

2007-11-02 Thread JFreezn
In a message dated 11/2/2007 2:07:16 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: I bought the 1992 600SEL with a tick in the motor three years ago. Replaced all the wirng under the hood. Started to deal with the ticking earlier this summer. Dropped the oil pan and it was FULL

Re: [MBZ] OT Honda use of dramatically unequal treads - Opinions wanted

2007-11-02 Thread JFreezn
In a message dated 11/2/2007 12:51:24 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Okay, I tried to explain in the subject what I need to know: On our 2000 Honda CRV, the tires are probably 1/3 tread remaining or less. We have a nail in one of the tires, so I put on the spare

Re: [MBZ] O.T. Acura's Cold Tapping

2007-11-02 Thread JFreezn
In a message dated 11/2/2007 7:14:37 A.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Had to schlep the youngest girl child to cheer practice this morning. The spousal unit's '87 Legend, 189K miles now, was parked behind my car so I drove the Legend for the first time in awhile. Kn

Re: [MBZ] 190D Ignition Question

2007-11-02 Thread JFreezn
In a message dated 11/1/2007 11:22:14 A.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Here's his response: Hi Bob - the ignition turns off and the engine stops, but the lights in the dash stay on and the battery will go dead in a day or so if I don't disconnect the battery. The

Re: [MBZ] Harmonic Balancer/double jeopardy

2007-10-31 Thread JFreezn
In a message dated 10/31/2007 8:57:53 A.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Is this something that I should be watching for on a 115 300D? Randy and all, As you have read, the 6 bolts holding the pulley to the dampener will loosen. The harmonic balancer, itself, will

Re: [MBZ] HELP--LOOSING POWER ON HARD RIGHT TURNS

2007-10-31 Thread JFreezn
In a message dated 10/31/2007 10:43:05 A.M. US Mountain Standard Tim, [EMAIL PROTECTED] writes: When cornering hard wide open in third gear--as when drifting around a tight, 270-degree-turn entrance ramp at about 50--I momentarily loose a bit of power just as I start to straighten out f

Re: [MBZ] Yea or nay: '91 300D, 305k miles

2007-10-30 Thread JFreezn
In a message dated 10/30/2007 12:36:32 P.M. US Mountain Standard Tim, [EMAIL PROTECTED] writes: Car has mucho service history and drives well, though the turbo didn't kick when I drove it BUT before starting I'd also just connected the overboost switch on the manifold that had been "myster

Re: [MBZ] More on Weird vacuum problem -- perplexion

2007-10-27 Thread jfreezn
So now I am wondering if it is the master cylinder is not working right? I bled all the hose fittings and the drain on the MC, clean fluid squirted out. New calipers out back, fronts seem OK, so don't think anything is wrong with them. Brakes do brake, just real hard push on the pedal req

Re: [MBZ] Office Depot also on Phoenix CL selling 06 Sprinter fleet

2007-10-26 Thread JFreezn
In a message dated 10/25/2007 9:18:40 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: [EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) But that's an email address. Do you have a web page address? The first part is the web, up through .orgor this: _http://phoenix.craigslist.or

Re: [MBZ] Really nice '67 200D

2007-10-26 Thread JFreezn
In a message dated 10/25/2007 7:59:14 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=150170762381 Very, very, nice! I put AC on my 66 200D, notably missing from this one. Jim Friesen Phoenix AZ 79 300SD, 264 K mil

Re: [MBZ] re;Knowledge/Henifay/Robb

2007-10-26 Thread JFreezn
In a message dated 10/25/2007 5:38:29 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: I might suggest that you take a step back and review what has transpired and then figure out who is and who is not acting within the spirit of the list. Oooh that's right, Americans don't take

Re: [MBZ] Office Depot also on Phoenix CL selling 06 Sprinter fleet

2007-10-25 Thread JFreezn
[EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) Prices vary Jim Friesen Phoenix AZ 79 300SD, 264 K miles 98 ML 320, 152 K miles ** See what's new at http://www.aol.com ___ http://www.okiebenz.com For new parts see o

Re: [MBZ] OM603 prechamber cross-threaded

2007-10-21 Thread JFreezn
In a message dated 10/21/2007 12:10:47 A.M. US Mountain Standard Tim, [EMAIL PROTECTED] writes: I'm looking to call local machine shops and see if they can help. I'd like to sound like I know what I'm looking for before I start calling.. Why don't you first try to get a metric thr

Re: [MBZ] climate control

2007-10-20 Thread jfreezn
Douglas, Is your system an ACCII with the Chrysler servo? One of the DIY tests for going to full heat is to unplug the ambient sensor.? Because it is easy to get to.? It sounds like you have an open in the loop.? Did you remember to plug in the 2 pin connector for the sensor wheel?? The in car

Re: [MBZ] loose air cleaner, W123 300D/ my $0.02/ check your mounts

2007-10-19 Thread JFreezn
In a message dated 10/19/2007 6:37:35 A.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: [EMAIL PROTECTED] writes: > By the way, a very sharp mechanic, at Tri-stars Petes old place, > told me that the filter bracket failure was due to bad motor > mounts. That was after I took a filte

Re: [MBZ] MY 1985 300SD got hit ...

2007-10-19 Thread JFreezn
In a message dated 10/19/2007 9:53:57 A.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: They are recommending finding a salvage door. Out side of inspecting the door before it is 'messed with' (to be sure it is cancer free), any suggestions? You could try _www.car-parts.com_ (h

Re: [MBZ] loose air cleaner, 300D/ my $0.02/ check your mounts

2007-10-18 Thread JFreezn
All joking aside, Graingers has the rubber mounts in 5/16 inch thread size. These will require a little drilling and tapping but they will last a long time! They also have them in 1/4" but you can't tell the difference once they are mounted. I also have added metal to the mounting bracke

Re: [MBZ] New Mercedes Diesel/Piezio

2007-10-18 Thread JFreezn
Piezio to me was: hit a rock, generate a spark. This would be the opposite; provide a spark will move a valve, a glorified solenoid valve. These electronic injectors are so quick that they permit 3 to 5 firings per power stroke, which controls the severity of the flame front travel an

Re: [MBZ] Zerex G-05/ $9.95 at Autozone

2007-10-18 Thread JFreezn
In a message dated 10/8/2007 10:40:34 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Dear all, This most likely has been addressed before by this august forum, but I forgot how often the coolant should be changed. Every 30 K? 3 years? Where do you get it these days? Used to be

Re: [MBZ] 87 300D valuation/searches

2007-10-17 Thread JFreezn
In a message dated 10/17/2007 5:09:24 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: The insurance company called me today and told me they valued my smashed 87 300D at $1650. I laughed and told them I'd just bought an identical car for $4800 and they needed to try again -- ty

Re: [MBZ] OT: would you buy a rental car?

2007-10-16 Thread JFreezn
In a message dated 10/16/2007 8:59:21 A.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Couple of people I know have been happy with cars they bought from Enterprise. I've also heard horror stories about the things people do to rental cars. Any opinions? Allan, About 15 years

Re: [MBZ] Low Sulfur Fuel Lubricity...Am I Nuts?

2007-10-15 Thread JFreezn
In a message dated 10/15/2007 1:45:26 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: Now that #2 is $3.05 here, I bought 5 gallons of SVO that was on sale to last me until tomorrow night when I have to head to work.where I can get, along the freeway, #2 at Loves for $2.85 (I hope

Re: [MBZ] Pilot bearing failure?

2007-10-15 Thread JFreezn
> A friend of mine suggested that my W124 ( 5 speed maual ) drivetrain > vibration ( when loaded at 1700 rpm ) could be related to a failing > pilot bearing - that's the bearing that supports the input shaft of > the > manual gearbox. What are the typical symptons of a failed pilot > beari

Re: [MBZ] 126 blower/squirrel cage removal

2007-10-15 Thread JFreezn
In a message dated 10/15/2007 4:33:53 A.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: I'm a little concerned that if I do not apply pressure in proper direction/fashion the aged plastic wheel may shatter. Can anyone suggest a method. This appears to be a press-on setup.

Re: [MBZ] Rack damper bolt, OM617.952

2007-10-14 Thread JFreezn
In a message dated 10/14/2007 10:39:05 A.M. US Mountain Standard Tim, [EMAIL PROTECTED] writes: I ask as I am wondering if the pump has to be 'parked' at a specific position, etc. Mac, You should warm up the engine first as this will affect the idle especially when cold. I installed m

Re: [MBZ] 1991 350SDL Market Value?

2007-10-12 Thread JFreezn
In a message dated 10/12/2007 8:24:31 P.M. US Mountain Standard Time, [EMAIL PROTECTED] writes: My friend in Jacksonville, Florida has her 1991 350SDL she's considering getting rid of. (I think the decision is based on what she can get for the car; She's considering selling it due to a fa

<    1   2   3   4   5   6   7   >