Re: [MBZ] windows no goze
Must be a problem with the motor. On Sat, Apr 14, 2018 at 11:06 PM, clay monroe via Mercedes < mercedes@okiebenz.com> wrote: > Switches were fully functional prior to putting the fresh motor in. Then > none of the switches would function. I cleaned them, and even my spares, > just for good measure. Now only the driver side rear responds to switch > from the console, while the rear switches do provide window action. > > I remain confused > > > clay > > 1974 450sl - Frosch - Two tone green > 1986 SDL - Polei > 1982 300 SD - Allen > > retired models- > 2002 s430 - Victor, a Stately & well tailored crap > 1976 300D - Blei Vanst - it looks silvery > 1972 220D - Gump - She was green, simple and ran > 1995 E300D - Gave her life to save me against a Dame in a SUV > POS 1987 SDL - Beware Nigerian Scammers > > > > > > > > > On Apr 14, 2018, at 4:59 AM, Jim Cathey via Mercedes < > mercedes@okiebenz.com> wrote: > > > > Remove door skin. See that both motor terminals have +12V on them > > normally, measured to the door frame metal. Use a test lamp, that puts a > > load on it to make sure it's actually got current ability and not just > > leakage. One or the other terminal is grounded to make the motor go, > > depending on direction. If you don't have +12V, you have a problem. 99% > > of the time it's dirty switches. > > > > -- Jim > > ___ > > http://www.okiebenz.com > > > > To search list archives http://www.okiebenz.com/archive/ > > > > To Unsubscribe or change delivery options go to: > > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] windows no goze
Switches were fully functional prior to putting the fresh motor in. Then none of the switches would function. I cleaned them, and even my spares, just for good measure. Now only the driver side rear responds to switch from the console, while the rear switches do provide window action. I remain confused clay 1974 450sl - Frosch - Two tone green 1986 SDL - Polei 1982 300 SD - Allen retired models- 2002 s430 - Victor, a Stately & well tailored crap 1976 300D - Blei Vanst - it looks silvery 1972 220D - Gump - She was green, simple and ran 1995 E300D - Gave her life to save me against a Dame in a SUV POS 1987 SDL - Beware Nigerian Scammers > On Apr 14, 2018, at 4:59 AM, Jim Cathey via Mercedes > wrote: > > Remove door skin. See that both motor terminals have +12V on them > normally, measured to the door frame metal. Use a test lamp, that puts a > load on it to make sure it's actually got current ability and not just > leakage. One or the other terminal is grounded to make the motor go, > depending on direction. If you don't have +12V, you have a problem. 99% > of the time it's dirty switches. > > -- Jim > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] windows no goze
Might be, but why would the ground fail now, while it worked the day I installed the fresh motor? clay > On Apr 13, 2018, at 10:05 PM, Curley McLain via Mercedes > wrote: > > ground under the console? > > clay monroe via Mercedes wrote: >> A few weeks ago I put a new motor in the front passenger regulator. Prior >> to this, all the other windows worked fine with the front controls. The >> rear windows respond to the door switches, but not console buttons, except >> for the driver rear. The front windows no longer go down or up, and rear >> pass window does not respond to front buttons. >> >> I checked the fuses and replaced, though they look fine. Copper/brass >> fuses, not the aluminum. Is there an ice cube relay that is needing >> attention? >> >> >> clay ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] windows no goze
Remove door skin. See that both motor terminals have +12V on them normally, measured to the door frame metal. Use a test lamp, that puts a load on it to make sure it's actually got current ability and not just leakage. One or the other terminal is grounded to make the motor go, depending on direction. If you don't have +12V, you have a problem. 99% of the time it's dirty switches. -- Jim ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] windows no goze
ground under the console? clay monroe via Mercedes wrote: A few weeks ago I put a new motor in the front passenger regulator. Prior to this, all the other windows worked fine with the front controls. The rear windows respond to the door switches, but not console buttons, except for the driver rear. The front windows no longer go down or up, and rear pass window does not respond to front buttons. I checked the fuses and replaced, though they look fine. Copper/brass fuses, not the aluminum. Is there an ice cube relay that is needing attention? clay 1974 450sl - Frosch - Two tone green 1986 SDL - Polei 1982 300 SD - Allen retired models- 2002 s430 - Victor, a Stately& well tailored crap 1976 300D - Blei Vanst - it looks silvery 1972 220D - Gump - She was green, simple and ran 1995 E300D - Gave her life to save me against a Dame in a SUV POS 1987 SDL - Beware Nigerian Scammers ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
[MBZ] windows no goze
A few weeks ago I put a new motor in the front passenger regulator. Prior to this, all the other windows worked fine with the front controls. The rear windows respond to the door switches, but not console buttons, except for the driver rear. The front windows no longer go down or up, and rear pass window does not respond to front buttons. I checked the fuses and replaced, though they look fine. Copper/brass fuses, not the aluminum. Is there an ice cube relay that is needing attention? clay 1974 450sl - Frosch - Two tone green 1986 SDL - Polei 1982 300 SD - Allen retired models- 2002 s430 - Victor, a Stately & well tailored crap 1976 300D - Blei Vanst - it looks silvery 1972 220D - Gump - She was green, simple and ran 1995 E300D - Gave her life to save me against a Dame in a SUV POS 1987 SDL - Beware Nigerian Scammers ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
