Re: [MBZ] W126 Repair Proccedures Needed (PDF Format)
Those panels are hung on and not clipped. Don't pry it away or you'll break plastic pieces off. You need to lift up the panel. Mike From: barry Stark barryst...@roadrunner.com To: Mercedes Discussion List mercedes@okiebenz.com Sent: Tuesday, January 20, 2009 2:27:50 AM Subject: Re: [MBZ] W126 Repair Proccedures Needed (PDF Format) Dan - Are you real sure about step 7? It has been a while since I did this too but it seem to remember prying out on the bottom panel of my '81 SD and broke some stuff on my door panel. Manual page 72-100 only says unscrew screw at bottom of panel and Pull door lining in upward direction and remove...then... Note says... Attention! Panel is hung on and not clipped on. Barry 7.) With a putty knife or similar tool, pry bottom edge of inner door panel out to release door panel. Work al the way around the door until the pins are released. ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com -- next part -- An HTML attachment was scrubbed... URL: http://okiebenz.com/pipermail/mercedes_okiebenz.com/attachments/20090120/4eb11e14/attachment.html ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] W126 Repair Proccedures Needed (PDF Format)
7.) With a putty knife or similar tool, pry bottom edge of inner door panel out to release door panel. Work al the way around the door until the pins are released. Popping those snaps ended with the 123 and 107. Everything later is hung on by fat plastic clips that you do NOT want to break! -- Jim ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] W126 Repair Proccedures Needed (PDF Format)
'Better NOT pry outward on a 126 panel; lift it UPWARD. Wilton - Original Message - From: barry Stark barryst...@roadrunner.com To: 'Mercedes Discussion List' mercedes@okiebenz.com Sent: Tuesday, January 20, 2009 2:27 AM Subject: Re: [MBZ] W126 Repair Proccedures Needed (PDF Format) Dan - Are you real sure about step 7? It has been a while since I did this too but it seem to remember prying out on the bottom panel of my '81 SD and broke some stuff on my door panel. Manual page 72-100 only says unscrew screw at bottom of panel and Pull door lining in upward direction and remove...then... Note says... Attention! Panel is hung on and not clipped on. Barry 7.) With a putty knife or similar tool, pry bottom edge of inner door panel out to release door panel. Work al the way around the door until the pins are released. ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] W126 Repair Proccedures Needed (PDF Format)
NEGATIVE on step 7; pry outward on a 123 panel, NOT on a 126 panel. Wilton - Original Message - From: LWB250 lwb...@yahoo.com To: Mercedes Discussion List mercedes@okiebenz.com Sent: Monday, January 19, 2009 8:30 PM Subject: Re: [MBZ] W126 Repair Proccedures Needed (PDF Format) No PDF needed. 1.) Pry black plastic trim out of the handle recess (there is a small slot on the hinge side of the plastic.) 2.) Remove phillips head screw from inside of bracket. 3.) Slide bracket down onto door pull. You'll expose a large phillips head screw at the top of the door pull. 4.) Remove screw from door pull and two other screws in the bottom of the arm rest. Remove arm rest from door. 5.) Remove chrome door strike trim from trailing edge of door. 6.) Remove two very small phillips head screws in side of window frame trim on trailing edge of door. Remove trim. 7.) With a putty knife or similar tool, pry bottom edge of inner door panel out to release door panel. Work al the way around the door until the pins are released. 8.) With door panel loose, carefully lift up and towards the front to unhook panel from front edge of door and window channel. 9.) After carefully removing the moisture shield (replace if damaged or torn!) you can see the release lever. Remove clip holding the lock rod and the two large phillips head screws. I'm doing this from memory, so if anyone wants to offer corrections, feel free to do so. Dan --- On Mon, 1/19/09, ANGELO GIAIMO gia...@us.ibm.com wrote: From: ANGELO GIAIMO gia...@us.ibm.com Subject: [MBZ] W126 Repair Proccedures Needed (PDF Format) To: mercedes@okiebenz.com Cc: michaelangel...@gmail.com Date: Monday, January 19, 2009, 6:06 PM -Inline Attachment Follows- Today, I pulled on the interior handle to get out of my car (Front Drivers Side) and it appears that the handle is no longer attached to the pivot (?) via some sort of press-fit pin. (It's there, but I see the hole in the handle has expanded and the pin almost fell out.), I can get the door to un-latch from the inside, but it's tricky. Anyway, I see I've got to replace that chrome handle and some other associated HW. (As to what, I don't know yet.) Anyone have the proccedure to remove/replace (and I'm guessing at this) the door panel, handle, etc, etc. in PDF format? I KNOW the manuals used to be somewhere on the web, but I can't find them. Thanks. Angelo Giaimo/Fishkill/IBM @ IBMUS Internet: gia...@us.ibm.com (845)894-4296 (tie 533); fax: 892-6235 (tie 532); 2070 Rt. 52; Hopewell Junction, N.Y. 12533 -- next part -- An HTML attachment was scrubbed... URL: http://okiebenz.com/pipermail/mercedes_okiebenz.com/attachments/20090119/15 9e0669/attachment.html ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] W126 Repair Proccedures Needed (PDF Format)
Thats how 201 doors work as well. I broke some clips quite badly the first time I tried to take a door panel off my 190D... -Curt Date: Mon, 19 Jan 2009 23:27:50 -0800 From: barry Stark barryst...@roadrunner.com Subject: Re: [MBZ] W126 Repair Proccedures Needed (PDF Format) To: 'Mercedes Discussion List' mercedes@okiebenz.com Message-ID: 20090120072756.qbeq16090.cdptpa-omta01.mail.rr@barryb9ddaeb02 Content-Type: text/plain; charset=us-ascii Dan - Are you real sure about step 7? It has been a while since I did this too but it seem to remember prying out on the bottom panel of my '81 SD and broke some stuff on my door panel. Manual page 72-100 only says unscrew screw at bottom of panel and Pull door lining in upward direction and remove...then... Note says... Attention! Panel is hung on and not clipped on. Barry 7.) With a putty knife or similar tool, pry bottom edge of inner door panel out to release door panel. Work al the way around the door until the pins are released. -- next part -- An HTML attachment was scrubbed... URL: http://okiebenz.com/pipermail/mercedes_okiebenz.com/attachments/20090120/0105d65e/attachment.html ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] W126 Repair Proccedures Needed (PDF Format)
You may be right, Barry. I could be confusing the 126 door panel with the 123 door panel. Best to move slowly in this area until one knows how things are attached... Thanks, Dan --- On Tue, 1/20/09, barry Stark barryst...@roadrunner.com wrote: From: barry Stark barryst...@roadrunner.com Subject: Re: [MBZ] W126 Repair Proccedures Needed (PDF Format) To: 'Mercedes Discussion List' mercedes@okiebenz.com Date: Tuesday, January 20, 2009, 2:27 AM Dan - Are you real sure about step 7? It has been a while since I did this too but it seem to remember prying out on the bottom panel of my '81 SD and broke some stuff on my door panel. Manual page 72-100 only says unscrew screw at bottom of panel and Pull door lining in upward direction and remove...then... Note says... Attention! Panel is hung on and not clipped on. Barry 7.) With a putty knife or similar tool, pry bottom edge of inner door panel out to release door panel. Work al the way around the door until the pins are released. ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com -- next part -- An HTML attachment was scrubbed... URL: http://okiebenz.com/pipermail/mercedes_okiebenz.com/attachments/20090120/410ffd90/attachment.html ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] W126 Repair Proccedures Needed (PDF Format)
124, 126 (and later I assume) door panels have hooks, and are removed by bumping them up. As others have said, on the 126, if you pry out, you break the hooks and then are in trouble. Sometimes you have to bump really hard for a long time to get them loose. The armrest is held by hooks also. (unless it was like one of my cars where the PO had broken the armrest hooks, and I used long drywall screws to attach the armrest again.) At 11:44 AM 1/20/2009, you wrote: You may be right, Barry. I could be confusing the 126 door panel with the 123 door panel. Best to move slowly in this area until one knows how things are attached... Thanks, Dan --- On Tue, 1/20/09, barry Stark barryst...@roadrunner.com wrote: From: barry Stark barryst...@roadrunner.com Subject: Re: [MBZ] W126 Repair Proccedures Needed (PDF Format) To: 'Mercedes Discussion List' mercedes@okiebenz.com Date: Tuesday, January 20, 2009, 2:27 AM Dan - Are you real sure about step 7? It has been a while since I did this too but it seem to remember prying out on the bottom panel of my '81 SD and broke some stuff on my door panel. Manual page 72-100 only says unscrew screw at bottom of panel and Pull door lining in upward direction and remove...then... Note says... Attention! Panel is hung on and not clipped on. Barry 7.) With a putty knife or similar tool, pry bottom edge of inner door panel out to release door panel. Work al the way around the door until the pins are released. ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com -- next part -- An HTML attachment was scrubbed... URL: http://okiebenz.com/pipermail/mercedes_okiebenz.com/attachments/20090120/410ffd90/attachment.html ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com Loren Faeth ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] W126 Repair Proccedures Needed (PDF Format)
No PDF needed. 1.) Pry black plastic trim out of the handle recess (there is a small slot on the hinge side of the plastic.) 2.) Remove phillips head screw from inside of bracket. 3.) Slide bracket down onto door pull. You'll expose a large phillips head screw at the top of the door pull. 4.) Remove screw from door pull and two other screws in the bottom of the arm rest. Remove arm rest from door. 5.) Remove chrome door strike trim from trailing edge of door. 6.) Remove two very small phillips head screws in side of window frame trim on trailing edge of door. Remove trim. 7.) With a putty knife or similar tool, pry bottom edge of inner door panel out to release door panel. Work al the way around the door until the pins are released. 8.) With door panel loose, carefully lift up and towards the front to unhook panel from front edge of door and window channel. 9.) After carefully removing the moisture shield (replace if damaged or torn!) you can see the release lever. Remove clip holding the lock rod and the two large phillips head screws. I'm doing this from memory, so if anyone wants to offer corrections, feel free to do so. Dan --- On Mon, 1/19/09, ANGELO GIAIMO gia...@us.ibm.com wrote: From: ANGELO GIAIMO gia...@us.ibm.com Subject: [MBZ] W126 Repair Proccedures Needed (PDF Format) To: mercedes@okiebenz.com Cc: michaelangel...@gmail.com Date: Monday, January 19, 2009, 6:06 PM -Inline Attachment Follows- Today, I pulled on the interior handle to get out of my car (Front Drivers Side) and it appears that the handle is no longer attached to the pivot (?) via some sort of press-fit pin. (It's there, but I see the hole in the handle has expanded and the pin almost fell out.), I can get the door to un-latch from the inside, but it's tricky. Anyway, I see I've got to replace that chrome handle and some other associated HW. (As to what, I don't know yet.) Anyone have the proccedure to remove/replace (and I'm guessing at this) the door panel, handle, etc, etc. in PDF format? I KNOW the manuals used to be somewhere on the web, but I can't find them. Thanks. Angelo Giaimo/Fishkill/IBM @ IBMUS Internet: gia...@us.ibm.com (845)894-4296 (tie 533); fax: 892-6235 (tie 532); 2070 Rt. 52; Hopewell Junction, N.Y. 12533 -- next part -- An HTML attachment was scrubbed... URL: http://okiebenz.com/pipermail/mercedes_okiebenz.com/attachments/20090119/159e0669/attachment.html ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] W126 Repair Proccedures Needed (PDF Format)
Anyway, I see I've got to replace that chrome handle and some other associated HW. (As to what, I don't know yet.) You could try gluing the pin back in place, if the handle is otherwise still good. -- Jim ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] W126 Repair Proccedures Needed (PDF Format)
Dan - Are you real sure about step 7? It has been a while since I did this too but it seem to remember prying out on the bottom panel of my '81 SD and broke some stuff on my door panel. Manual page 72-100 only says unscrew screw at bottom of panel and Pull door lining in upward direction and remove...then... Note says... Attention! Panel is hung on and not clipped on. Barry 7.) With a putty knife or similar tool, pry bottom edge of inner door panel out to release door panel. Work al the way around the door until the pins are released. ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com