Hi,
One of my openBSD server is the Gateway/Firewall to internet.
Our mal server(s) is on the Internet.
What would be the best method to scan all mail traffic through the firewall?
Currenly I am using plain NAT.
It would be great if people can recommend which is the best software
from
Le 3 juin 06 ` 20:05, Falk Brockerhoff a icrit :
Hello,
is there an equivalent for cisco's
sh ip bgp neighbors neighbor advertised-routes
and
sh ip bgp neighbors neighbor received-routes
Regards,
Should be really usefull to debug some filters and see if they are
really applied...
Siju George wrote:
Hi,
One of my openBSD server is the Gateway/Firewall to internet.
Our mal server(s) is on the Internet.
What would be the best method to scan all mail traffic through the
firewall?
Currenly I am using plain NAT.
It would be great if people can recommend which is the
On Sun, 4 Jun 2006 21:43:25 -0500, Jacob Yocom-Piatt [EMAIL PROTECTED]
wrote:
i've got a few machines that have heatsinks and fans which are effective but
very loud. i would like to get some heatsinks and fans that are quiet, reliable
and reasonably priced. this has become a priority now that
On Mon, 05 Jun 2006 02:25:21 -0700, J.C. Roberts wrote:
On Sun, 4 Jun 2006 21:43:25 -0500, Jacob Yocom-Piatt [EMAIL PROTECTED]
wrote:
i've got a few machines that have heatsinks and fans which are effective but
very loud. i would like to get some heatsinks and fans that are quiet,
reliable
and
I have seen this with pc's which had problems supporting the pci bridge on
the
network cards, usually older/cheaper pc's.
I don't remember the name of the Adaptec card I dug out of the rubbish bin,
but it looks like this in my old home firewalls.
ppb1 at pci1 dev 0 function 0 DEC 21154 PCI-PCI
Thus spake J.C. Roberts ([EMAIL PROTECTED]) [05/06/06 05:20]:
: Most people just don't get it. The equation is simple:
:
: HEAT * TIME
And, as someone else has more elegantly pointed out:
COOL != LOUD
A well-designed cooling system can keep your system running cooler than with
stock
Jacob Yocom-Piatt wrote:
i've got a few machines that have heatsinks and fans which are effective but
very loud. i would like to get some heatsinks and fans that are quiet, reliable
and reasonably priced. this has become a priority now that i've moved one of
these machines to my home and keep it
Christian Pedaschus wrote:
i was a bit too fast with replying.
deleting is very fast now, but copying still takes forever, 11minutes
for 150mb...
any more thoughts?
I did a fresh install and now it works with ~2mb/sec (with softdep).
Seems i borked something last time...
Greets, Chris
On Mon, 5 Jun 2006 06:25:09 -0400, Damian Gerow [EMAIL PROTECTED]
wrote:
Thus spake J.C. Roberts ([EMAIL PROTECTED]) [05/06/06 05:20]:
: Most people just don't get it. The equation is simple:
:
: HEAT * TIME
And, as someone else has more elegantly pointed out:
COOL != LOUD
A well-designed
Dear all
I have 2 connection ISP ( let's say ISP-A and ISP-B ).
My Question :
How to Max Bandwith for Both isp , may be :
- Redudant ( for proxy server )
- Fail over ( for GateWay and MX server )
- Load Balancing ( For Web Server and Mail server )
Of course all using OpenBSD 3.9 and i don't
Dear all
Any body here have install GPL WHM ( Web Hosting Management ) in
OpenBSD such as ISP config , i have plant to use OpenBSD for
WebHosting .
Mya be can be give some success story instal WHM ( IN GPL ) OpenBSD.
-sonjaya-
Thus spake J.C.Roberts ([EMAIL PROTECTED]) [05/06/06 08:35]:
: You're right that well designed cooling systems can make things run
: cooler and with less noise but more importantly, there's only one way to
: determine if various cooling systems are actually well designed; namely,
: you have to go
On 6/4/2006 at 8:43 PM Rott_En wrote:
|I have a Lenovo R51e and I can tell you that the hardware is 100%
|compatible with almost all live CD *nix distributions, no problem at
all.
|
|I am very satisfied of this product because it is robust and fair,
battery
|life is good and hardware seems to be
Hello
Is it a risk to attempt using your recommedation ? Am I risking the integrity
of my cryptofile container ? It is 90GB big and I dont have any auxiliary
backup medium so big, taking a backup of it is almost out of hope.
I can't loose the data from this cryptofile, so please tell me if I
Original message
Date: Mon, 5 Jun 2006 04:47:28 -0700 (PDT)
From: Rott_En [EMAIL PROTECTED]
Subject: Re: Crypto Partition Problem
To: misc@openbsd.org
Hello
Is it a risk to attempt using your recommedation ? Am I risking the integrity
of my cryptofile container ? It is 90GB big and
thanks a bunch for all the suggestions guys. i'll certainly try some of these
heatsinks out since the 7000 RPM low profile screamers in the machine in my
bedroom gave me a shitty night's sleep last night.
too much like being married ;)
On 2006-06-02 20:10:22 -0500, Jacob Yocom-Piatt wrote:
i've got a website where i'd like to be able to make a map and/or list of the
various IPs and/or domains that visit it. i've got a large access.log file for
the site, could this be used to generate a map of the geographic locations of
the
On Mon, 5 Jun 2006 12:33:23 +0530
Siju George [EMAIL PROTECTED] spake:
Hi,
One of my openBSD server is the Gateway/Firewall to internet.
Our mal server(s) is on the Internet.
What would be the best method to scan all mail traffic through the firewall?
Currenly I am using plain NAT.
It
On Mon, Jun 05, 2006 at 04:47:28AM -0700, Rott_En wrote:
Is it a risk to attempt using your recommedation ? Am I risking the
integrity of my cryptofile container ? It is 90GB big and I dont have
any auxiliary backup medium so big, taking a backup of it is almost
out of hope.
I can't loose
Greetings and thank you all for your replies.
Thanks to all your suggestions I finally got it going with a caching
DNS server.
I understand this particular approach and am grateful to have it
working.
Being somehwat of a geek I am not content with merely getting it
working, though! :^)
sonjaya wrote:
Dear all
Any body here have install GPL WHM ( Web Hosting Management ) in
OpenBSD such as ISP config , i have plant to use OpenBSD for
WebHosting .
Mya be can be give some success story instal WHM ( IN GPL ) OpenBSD.
-sonjaya-
openisp??
www.openisp.org
--
The truth,
On Mon, Jun 05, 2006 at 09:15:20AM -0500, Jacob Yocom-Piatt wrote:
to get the geographic part working, edit your webalizer.conf
file to enable DNS lookups. that got it going for me.
Cool, it's working now. I just needed a little push.
Thanks
--
Terry
http://tyson.homeunix.org
Hi
Is there any way to synchronize PDA with Windows Mobile 5.0 under
OpenBSD? Any software is available? SynCE doesn't support WM 5.0.
TIA
Piotr Jedryczek
Hi all,
for a monitoring system I am reading the hw.sensors sysctls using
sysctl(3). To know what that sensor is trying to say to me I check
sensor.desc to see what that sensor is measuring.
lm0 tells me:
hw.sensors.8=lm0, Temp1, temp, 33.00 degC / 91.40 degF
hw.sensors.9=lm0, Temp2, temp,
Is reading the sensor.desc the right way to do this, and if so, is the
information in sensor.desc consistent across all drivers?
When it comes to i2c devices, we have no idea what is a particular pin
on the measuring chip is wired to. There is just no information at all.
Only the vendor knows.
On 6/3/06, Federico Giannici [EMAIL PROTECTED] wrote:
What is the problem?
Why the same binary worked perfectly with 3.8?
What I can do to solve the problem?
Maybe the problem is related to the following note I found in the
changes from 3.8 to 3.9. Unfortunately I cannot understand what it
What do you mean... 'How to Max Bandwidth for Both isp' ?
Dan Farrell
Applied Innovations
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of sonjaya
Sent: Monday, June 05, 2006 8:07 AM
To: misc@openbsd.org
Subject: Max 2 ISP bandwith
Hello,
I'm running current on thinkxpad x60s.
I've installed qemu and I'm running windows xp in qemu.
Unfortunately ethernet does not work. No network interface
is detected in windows xp.
Currently I start the virtual machine like this:
qemu -net tap xp.hd -m 768 -localtime
While starting qemu
hello,
does anyone know how these *.fs files for bootable floppies in the
distribution are made? i need to make a custom one with /etc/boot.config in
it, but i do not want to use a physical floppy for that.
thanks
konstantin
On Mon, Jun 05, 2006 at 11:42:59AM -0700, akonsu wrote:
| does anyone know how these *.fs files for bootable floppies in the
| distribution are made? i need to make a custom one with /etc/boot.config in
| it, but i do not want to use a physical floppy for that.
I did this for serial support and
Ok, SORRY fixed now!
Didier
akonsu wrote:
thanks. how did you achieve this? i downloaded an evaluation copy of vmware
workstation, created a machine with a raw disk pointing to my openbsd
partition but it won't boot. it says that there were no bootable drives
found.
konstantin
booting openbsd on a real partition both
Is reading the sensor.desc the right way to do this, and if so, is the
information in sensor.desc consistent across all drivers?
When it comes to i2c devices, we have no idea what is a particular pin
on the measuring chip is wired to. There is just no information at all.
Only the
2006/6/5, Theo de Raadt [EMAIL PROTECTED]:
Is reading the sensor.desc the right way to do this, and if so, is the
information in sensor.desc consistent across all drivers?
When it comes to i2c devices, we have no idea what is a particular pin
on the measuring chip is wired to. There is just
2006/6/5, Theo de Raadt [EMAIL PROTECTED]:
Ok, thank you.
I was just wondering about the strings placed in sensors.desc. If they
are consistent among all drivers I can use that reliably.
We are trying to be somewhat consistant. But don't rely on that. You
can't. And you will see what we
I'm trying to make a web page to maintain my Apache authorization file
with instead of dbmmanage.
Since I have to have php loaded for other reasons I started
there. Problem seems to be that with either the package or port
system that only gdbm is supported in php-4 and gdbm is not
supported by
OpenCON 2006
OpenCON is the first european conference entirely dedicated to OpenBSD.
The manifestation will take place in Mestre/Venice, Italy, on December.
Some OpenBSD developers, have already confirmed their presence. It will
be possible to follow many speeches, use the conference LAN, speak
Hi,
What are my options for encrypting wireless traffic between client
and access point, where the access point is an OpenBSD box with a
supported wireless card? Does it just depend on what encryption
methods the card supports?
I'm not that bothered about people getting onto the network,
I used fsck -n and then tried to mount the /crypto/home/cryptofile partition
container with no luck, same results stating:
# sh cryptfs -m -p /home -f /crypto/home/cryptofile -d /dev/svnd0c
Encryption key:
vnconfig: VNDIOCSET: Device busy
mount_ffs: /dev/svnd0c on /home: specified device does
From: [EMAIL PROTECTED]
WEP is pretty much out, WPA isn't supported, IPSec is probably too
complicated for the general public to get going, and that's about
it. If I can't do it in OpenBSD, I may have to use a
separate access
point, but I'd rather keep it all in one box.
Any
In case anyone was going to answer this. :^)
Forget this followup.
In my rush to get an answer I didn't actually think about what I
was asking at the end (thanks to Jeff Quast for pointing this out).
Take care,
Allen
Tired of spam? Yahoo! Mail has the best spam protection around
On 6/5/06, knitti [EMAIL PROTECTED] wrote:
- 2nd partition ffs
sorry, thats slightly wrong, this partition held openbsd, which had
a single disk slice with a ffs. But I didn't see any limitation that there
could be more than one.
knitti
hi,
I moved your reply under my statement for readability
I wrote:
booting openbsd on a real partition both from bios and from vmware worked
without flaw in my tests. why shouldn't it? it's a dual-boot situation,
but you
just have to make sure, the bootloader hits the right pbr. no magic.
On Mon, Jun 05, 2006 at 01:14:15PM -0700, Spruell, Darren-Perot wrote:
From: [EMAIL PROTECTED]
WEP is pretty much out, WPA isn't supported, IPSec is probably too
complicated for the general public to get going, and that's about
it. If I can't do it in OpenBSD, I may have to use a
On Mon, Jun 05, 2006 at 01:01:34PM -0700, Rott_En wrote:
I used fsck -n and then tried to mount the /crypto/home/cryptofile
partition container with no luck, same results stating:
# sh cryptfs -m -p /home -f /crypto/home/cryptofile -d /dev/svnd0c
Encryption key:
vnconfig: VNDIOCSET: Device
I am in the position to help testing 3.9 on a Lenovo r51e, but I can't install
it because it is a job -related Windows machine (sad but true)
If anyone knows a live cd distro for 3.9, please point it out and I could help
maiby proof certain aspects for and against this vendor.
Thank you for
On 5 Jun 2006, at 21:14, Spruell, Darren-Perot wrote:
From: [EMAIL PROTECTED]
WEP is pretty much out, WPA isn't supported, IPSec is probably too
complicated for the general public to get going, and that's about
it. If I can't do it in OpenBSD, I may have to use a
separate access point, but
Lenovo
In other news Lenovo pretend that they never used the words We will
not have models available for Linux, and we do not have custom order,
either:
http://news.com.com/Lenovo+denies+ditching+Linux/2100-1003_3-6080115.html
Didier Wiroth wrote:
Ok, SORRY fixed now!
What did you do to fix it? I'm asking because I tried this morning to
use the new qemu v0.8 package, but it no longer works with my previous
config and scripts. It looks like they changed the interface in the
latest version and removed the -tun-fd
On Mon, Jun 05, 2006 at 01:01:34PM -0700, Rott_En wrote:
I used fsck -n and then tried to mount the /crypto/home/cryptofile
partition container with no luck, same results stating:
# sh cryptfs -m -p /home -f /crypto/home/cryptofile -d /dev/svnd0c
Encryption key:
vnconfig: VNDIOCSET: Device
From: [EMAIL PROTECTED]
Although a VPN is a possibility, I'm thinking more along the
lines of
a wireless hotspot than an extended network. I want to make it as
plain and simple as possible for punters to walk in off the street
and get internet access. No client downloads, no
On 2006/06/05 22:06, Gaby vanhegan wrote:
Although a VPN is a possibility, I'm thinking more along the lines of
a wireless hotspot than an extended network.
Turn off encryption unless you want to give a false impression
of security. WPA is still subject to ARP poisoning attacks from
users on
On 5 Jun 2006, at 23:05, Spruell, Darren-Perot wrote:
Recent FreeBSD has WPA(2?) support or you could pick up a $50 WAP
to provide
it too. Don't know if there's anything with good security and good
ease-of-client-setup outside of that...
It's always the trade-off between ease of use and
On 2006/06/05 23:58, Gaby vanhegan wrote:
Turn off encryption unless you want to give a false impression
of security. WPA is still subject to ARP poisoning attacks from
users on the network.
If somebody is determined to get in, they will.
You said, I'm more concerned with stopping people
From: [EMAIL PROTECTED]
If somebody is determined to get in, they will.
You said, I'm more concerned with stopping people sniffing
other wireless traffic.
Unless you use something that avoids running ARP-based protocols
directly on 802.11 (pppoe?), WPA does not stop users of your
mal content [EMAIL PROTECTED] 06/06 7:30 am
Lenovo
In other news Lenovo pretend that they never used the words We will
not have models available for Linux, and we do not have custom
order,
either:
http://news.com.com/Lenovo+denies+ditching+Linux/2100-1003_3-6080115.html
Oh YES, Lenovo
On 2006/06/05 16:36, Spruell, Darren-Perot wrote:
From: [EMAIL PROTECTED]
If somebody is determined to get in, they will.
You said, I'm more concerned with stopping people sniffing
other wireless traffic.
Unless you use something that avoids running ARP-based protocols
directly
Hi guys,
There's been a lot of progress recently in relation to SCSI, RAID,
and bio support for several controllers. However, all of them have
been made by LSI Logic. We'd like to balance this out a bit by
working on another popular RAID controller, specifically the Smart
ARRAY
Tor is a good option for encrypting web FTP traffic, though it can be
a little slow.
tor.eff.org
--
The truth, the half-truth, and nothing like the truth. - Mark Brandon Read
On Tue, Jun 06, 2006 at 01:31:38AM +0100, Stuart Henderson wrote:
If it's some hotspot-like setup, you don't need to circumvent
anything since you already have access to the network.
You'd be sniffing encrypted traffic at that point, right?
--
Darrin Chandler| Phoenix BSD Users
I once posted that all the anti-virus checking should be done on the
Windows boxes only. Let the mail server deliver mail, let the firewall
block bad packets, and let Windows find the viruses. Why? Re-read what
Chad stated in the last sentence below. Some people replied that that
was
use all connection because now only 1 isp to main connection and the
isp-b is sleep..
On 6/6/06, Dan Farrell [EMAIL PROTECTED] wrote:
What do you mean... 'How to Max Bandwidth for Both isp' ?
i have already open that link but nothing haven't
openisp??
www.openisp.org
--
The truth, the half-truth, and nothing like the truth. - Mark Brandon Read
--
-sonjaya-
On Tuesday 06 June 2006 08:13, Ioan Nemes wrote:
The above article is a PR exercise, just testing the waters!
No, it's not just a PR exercise. The reason for the sudden retreat is that
they still want to be able to sell to the Taiwanese government.
---
Lars Hansson
Ok, I've just upgraded to OpenBSD 3.9, but I'm still having the same issues.
Martmn Coco escribis:
Thanks for your reply.
Yes, I have checked this. I didn't associate it with my problem as I am
not getting blue kernel messages, the disc IS mounted ok, and I'm also
not seeing negative numbers
Hi all,
I have been looking high and low for instructions on how to get 3.9
running on an x4100. Not finding any, I decided to play w/ it myself. I
was able to make it work. While I have included the entire dmesg, here is
the interesting (for the SAS controller, anyway) bit:
mpi0 at pci2 dev 3
Hi Nick,
On Mon, Jun 05, 2006 at 09:51:13PM -0700, [EMAIL PROTECTED] wrote:
| I have been looking high and low for instructions on how to get 3.9
| running on an x4100. Not finding any, I decided to play w/ it myself. I
| was able to make it work. While I have included the entire dmesg, here is
As we all now know, some US inteligence agencies use various forms of torture.
One of which is called stressfull positions.
My drivers side seat has been tampered with so that is causes severe back pain
when driving. I have a long commute and it is a problem.
Also done to my car; wheel
69 matches
Mail list logo
