Hi guys,
i'm trying to use a temperature and humidity sensor with a openbsd i386.
I developed a c program with can read the sensor. i used debian to
develop the tool.
Now i'm trying to migrate the program to openbsd. but it did'nt work.
Can someone tell me why openbsd tells me a byte of 1.
here
Bonjour,
Je vous propose d'assister ` notre formation Riussir sa campagne Web
Marketing
qui aura lieu prochainement ` Paris, Lyon, Toulouse et Sophia-Antipolis.
En participant ` cette formation Web marketing, vous dicouvrirez les
dernihres techniques
pour amiliorer la notoriiti, l'image de
On Tue, Oct 07, 2008 at 11:11:06AM +, Stuart Henderson wrote:
| On 2008-10-07, Eric Mertens [EMAIL PROTECTED] wrote:
| Hello,
|
| I've installed OpenBSD-CURRENT on my VIA EPIA PX1G motherboard.
| Everything seems supported expect that the VT1708A HD audio codec is
| not detected in
On 2008-10-07, Christophe Rioux [EMAIL PROTECTED] wrote:
# pfctl -f pf.conf
pfctl: failed to create table __automatic_e11ee055_282 in :
Cannot allocate
memory
pfctl in free(): error: chunk is already free
Abort trap (core dumped)
that's a PF ruleset optimizer bug. I think it was fixed after
Hello,
I am trying to set up a configuraion like this :
+--- -+ +-+
| ISP1 | | ISP2 | Cisco
| ROUTER | | ROUTER |
| AS3215 | | AS12670 |
+-+ +-+
On 2008-10-07, Eric Mertens [EMAIL PROTECTED] wrote:
Hello,
I've installed OpenBSD-CURRENT on my VIA EPIA PX1G motherboard.
Everything seems supported expect that the VT1708A HD audio codec is
not detected in the dmesg or pcidump. Would anyone be interested in
the output of these or
ok, we have multiple issues here.
* Christophe Rioux [EMAIL PROTECTED] [2008-10-07 13:15]:
NameSize Requests Fail Releases Pgreq Pgrel Npage Hiwat Minpg Maxpg
Idle
...
pfrktable 1240 54345 4434 334 0 334 334 0 334
0
...
The rest seems to be OK.
the 5
Hi
I check some information on my system:
vmstat -m
NameSize Requests Fail Releases Pgreq Pgrel Npage Hiwat Minpg Maxpg
Idle
...
pfrktable 1240 54345 4434 334 0 334 334 0 334
0
...
The rest seems to be OK.
I try to increase the memory for the table in
On Tue, Oct 07, 2008 at 09:01:04AM +0200, henrik hansen wrote:
Hi guys,
i'm trying to use a temperature and humidity sensor with a openbsd i386.
I developed a c program with can read the sensor. i used debian to
develop the tool.
Now i'm trying to migrate the program to openbsd. but it
Kgdb kernel debugging appears to have been broken in 4.4-CURRENT for a week
if not longer. The exact same config file works creating a debug kernel
under 4.3. I've updated kernel, userland etc. The same thing happens under
every virtualised environment I throw it at (vmware, qemu, virtualbox).
On 2008-10-06, igor denisov [EMAIL PROTECTED] wrote:
Hi I get my internet works running installation process with RJ-45 plug
connected and as you pointed out there is dhcp none none none in
hostname.rl0, lot of thanks.I heve anither thing, lynx is not so
convinient to me I need some other
On Tue, Oct 7, 2008 at 9:43 AM, Peter Kay - Syllopsium
[EMAIL PROTECTED] wrote:
Kgdb kernel debugging appears to have been broken in 4.4-CURRENT for a week
if not longer. The exact same config file works creating a debug kernel
under 4.3. I've updated kernel, userland etc. The same thing
On 2008-10-06, Jean-Girard Pailloncy [EMAIL PROTECTED] wrote:
The Dell Poweredge R200 has a ipmi board but
ipmi at mainbus0 not configured
Is there some new stuff in current to support the ipmi on R200 ?
especially the watchdog feature. Or patch waiting to be tested ?
ipmi is compiled-in to
* Stuart Henderson [EMAIL PROTECTED] [2008-10-07 15:16]:
On 2008-10-07, Christophe Rioux [EMAIL PROTECTED] wrote:
# pfctl -f pf.conf
pfctl: failed to create table __automatic_e11ee055_282 in :
Cannot allocate
memory
pfctl in free(): error: chunk is already free
Abort trap (core
The workaround work fine ... thanks
-Message d'origine-
De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
De la part de Stuart Henderson
Envoyi : mardi 7 octobre 2008 15:10
@ : misc@openbsd.org
Objet : Re: OpenBSD 3.9 - 4.3: pfctl Cannot allocate memory
On 2008-10-07, Christophe
Hi,
one of our OpenBSD 4.2 HP ProLiant machines hanged up today repeating the
following messages:
sd0(ciss0:0:0): cannot allocate scsi xs
sd0: not queued, error 12
sd0(ciss0:0:0): cannot allocate scsi xs
sd0: not queued, error 12
sd0(ciss0:0:0): cannot allocate scsi xs
sd0: not queued, error 12
From: Ted Unangst [EMAIL PROTECTED]
To: Peter Kay - Syllopsium [EMAIL PROTECTED]
You might be the only one using kgdb. Between 4.3 and 4.4 the pccom
device was folded into com, which may not have gone perfectly.
OK. A further question, then.
What I'm trying to do is debug if_bridge and
The table that is displayed by the bios at boot time show the sound
card at 128:1:0. I saw output from someone else's Linux lspci output
that confirmed that the device was on pci bus 0x80.
I have tried disabling apm and I have tried various combinations of
pcibios flags (though I might
On Tue, Oct 7, 2008 at 4:11 AM, Stuart Henderson [EMAIL PROTECTED] wrote:
Including dmesg is always a good idea. Also check with boot -c
and disable apm so that acpi is used instead of apm, and send that
dmesg too. For pcidump, build the very latest version (check the
$OpenBSD$ line for
The entire point is to not use a workaround, but to get the bug fixed.
If the workaround is going to be used by more than 2 people, we would
disable the optimizer again, for everyone.
The workaround work fine ... thanks
-Message d'origine-
De : [EMAIL PROTECTED] [mailto:[EMAIL
On 2008/10/07 17:30, Christophe Rioux wrote:
The workaround work fine ... thanks
Ok. Your system is working now but we have to check if the bug
you found has been fixed in the meantime and if not, get it fixed.
Are you able to send the ruleset or a sanitized version of
same that still triggers
Hi
I'm unable to use luvcview or fswebcam with the builtin webcam on my Vostro
1310,
running luvcview spits out:
luvcview version 2.0
Video driver: x11
A window manager is available
video /dev/video0
Unable to set format: 22.
Init v4L2 failed !! exit fatal
running fswebcam locks the machine
2008/10/7 BARDOU Pierre [EMAIL PROTECTED]
Hello,
I am trying to set up a configuraion like this :
+--- -+ +-+
| ISP1 | | ISP2 | Cisco
| ROUTER | | ROUTER |
| AS3215 | | AS12670 |
BOGAZICI EGITIM EKIM 2008 EGITIM TAKVIMI
w w wb o g a z i c i e g i t i m c o mt r - Tel: 0 /
216 486 30 95
Ayin Zirvesi
III. Satinalma ve Tedarik Zinciri Yonetimi Zirvesi
10 - 11 - 12 Ekim 2008 / Sheraton Istanbul Otel
Konusmacilar: Mehmet Ali NEYZI (Zorlu Enerji Grubu
On Tue, Oct 7, 2008 at 11:36 AM, Peter Kay - Syllopsium
[EMAIL PROTECTED] wrote:
if_bridge and if_pppoe are both kernel level files, and I want to set
breakpoints to find out where it is/isn't working, so kgdb seemed like the
best thing to use.
Given that I'm in a minority of kgdb users,
I have a new box runing a fresh install of OpenBSD 4.3 and openvpn-2.0.9p1
(installed from port). My problem is with pf dropping stateful respone
traffic. The SYN enters the tun0 interface and is forwarded to vic0. The
response traffic enters vic0 and is dropped.
pf.conf:
nat on vic1 from
Hi.
In light of the recent thread about bigmem support, I ran a test (bigmem=1)
on my system with not-so-great results. Following is a dmesg excerpt:
...
uhci4: host controller process error
uhci4: host controller halted
ehci0: unrecoverable error, controller halted
ehci0:
Frans Haarman wrote:
2008/10/7 BARDOU Pierre [EMAIL PROTECTED]
Hello,
I am trying to set up a configuraion like this :
+--- -+ +-+
| ISP1 | | ISP2 | Cisco
| ROUTER | | ROUTER |
| AS3215 | |
In message [EMAIL PROTECTED]
so spake Dawe (dawedawe):
I had the same problem with my eee pc 900 as stated in i386/5873:
azalia(4) seemed to work, but the speakers didn't produce any output.
Running a snapshot from last week, I played again with some mixerctl
settings and found the
On Tue, Oct 07, 2008 at 09:27:33PM +0200, Thomas Pfaff wrote:
| Hi.
|
| In light of the recent thread about bigmem support, I ran a test (bigmem=1)
| on my system with not-so-great results. Following is a dmesg excerpt:
|
| ...
| uhci4: host controller process error
| uhci4: host
Hello, this is an IBM x3650, i booted with a 4.3 cd and this is the
dmesg (SAS hard disks are not recognized)
OpenBSD 4.3 (RAMDISK_CD) #645: Wed Mar 12 11:31:03 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Xeon(TM) MV CPU 3.20GHz (GenuineIntel
Todd C. Miller wrote:
In message [EMAIL PROTECTED]
so spake Dawe (dawedawe):
I had the same problem with my eee pc 900 as stated in i386/5873:
azalia(4) seemed to work, but the speakers didn't produce any output.
Running a snapshot from last week, I played again with some mixerctl
On Tue, Oct 07, 2008 at 06:26:23PM -0200, Marcos Laufer wrote:
Hello, this is an IBM x3650, i booted with a 4.3 cd and this is the
dmesg (SAS hard disks are not recognized)
Adaptec ASR-2120S rev 0x02 at pci6 dev 0 function 0 not configured
The driver for Adaptec RAID (aac) is disabled by
I get this output:
hw.sensors.cpu0.temp0=39.00 degC
hw.sensors.lm1.temp0=45.00 degC
hw.sensors.lm1.temp1=22.00 degC
hw.sensors.lm1.temp2=31.50 degC
hw.sensors.lm1.fan1=2070 RPM
But, I'm rather certain that the third line (22.00 degC) is the actual temp
of the CPU as this is what the BIOS reports
Unfortunately we don't know what the BIOS knows. We don't know what
sensors is where, so you will have to make do.
To find out how OpenBSD gathers this, there have been presentations
by developers about this, and you have the source code.
hw.sensors.cpu0.temp0=39.00 degC
Richard P. Koett wrote:
I installed -current (i386), downloaded src ports, and installed
poptop-1.3.0 and pptp-1.7.1p0.
Trying to establish a pptp connection fails, and the following is
logged in /var/log/daemon:
Oct 5 13:31:58 gateway ppp[25094]: Warning: Label plugin rejected
B qnnayemhh nr 8 njrap 2008 c. new_guy m`ohq`k(a):
I get this output:
hw.sensors.cpu0.temp0=39.00 degC
hw.sensors.lm1.temp0=45.00 degC
hw.sensors.lm1.temp1=22.00 degC
hw.sensors.lm1.temp2=31.50 degC
hw.sensors.lm1.fan1=2070 RPM
But, I'm rather certain that the third line (22.00 degC) is
On Oct 7, 2008, at 6:25 PM, new_guy [EMAIL PROTECTED] wrote:
I get this output:
hw.sensors.cpu0.temp0=39.00 degC
hw.sensors.lm1.temp0=45.00 degC
hw.sensors.lm1.temp1=22.00 degC
hw.sensors.lm1.temp2=31.50 degC
hw.sensors.lm1.fan1=2070 RPM
But, I'm rather certain that the third line (22.00
Release: 4.4 snapshot as of 2008/06/10
Platform: amd64 UP and MP
Hardware: Intel Atom 330 on D945GCLF2
I picked up an Intel D945GCLF2 last week to play with, and it's been
fairly unstable. Specifically, it randomly just freezes: no ddb, no
error messages, it just hangs. When it's hung, the
All -
How can I do NAT/PAT over IPsec.
To explain more. I have 4 hosts in 2 different networks (10.200.0/22
and 10.57.132/24). They are 10.57.132.18, 10.57.132.24, 10.57.132.41
and 10.200.1.208. When these hosts access 10.200.200/24,
10.200.136/24, 10.200.205/24 and 10.200.132/24 I want
Are you running the latest version of the BIOS on the board??
http://clk.atdmt.com/UKM/go/111354029/direct/01/
Sevan / Venture37 wrote:
Are you running the latest version of the BIOS on the board??
http://clk.atdmt.com/UKM/go/111354029/direct/01/
Ah, yes, I knew I forgot to include something.
I also updated the BIOS to the latest revision today, and re-ran all the
tests, to the exact same conclusion.
Hello,
Can anyone tell me whether the Macbook Pro's USB Bluetooth Adaptor is
supported? I get the following line from my dmesg:
ugen0 at uhub0 port 4 Apple Computer Bluetooth rev 2.00/0.0b addr 2
Unfortunately, I don't see any ubt device, even though I have enabled
it in my kernel.
If the
Anyone got one of the posters yet?
I've gotten one of the first ones (of course).
Shiny, shiny, shiny.
44 matches
Mail list logo
