On Tue, Nov 20, 2018 at 06:40:50PM -0800, Philip Guenther wrote:
>
> Not supported yet. There will be some sort of announcement when it works.
>
>
> Philip Guenther
OK thank you. I was figuring it was me because I have gotten pretty much most of
the main Linux distros to work. In fact the
Has anyone gotten this working?
Just trying it as an experiment.
I installed using qemu, serial console is working but when I boot through vmctl
the console shows a supervisor read error, page not found which from what I read
is indicative of bad memory. In qemu it boots fine though. Not sure
On Sat, Nov 17, 2018 at 10:42:57PM +0100, Ingo Schwarze wrote:
> Hi Martin,
>
> Martin Sukany wrote on Sat, Nov 17, 2018 at 09:13:15PM +0100:
>
> > I want to migrate OpenBSD 6.4 (stable) from VM to bare metal. I see, as
> > usual, two options:
> >
> > 1) install everything from scratch
> > 2)
unt of /, other than
of course doing the surgery on /etc/rc (which you then get to maintain
as a local change from now on).
If that's what you need and you consider it worth the trouble, that's
approximately what you need to do.
- Peter
--
Peter N. M. Hansteen, member of the first RFC 1149 implementat
On Thu, Nov 15, 2018 at 09:36:45AM +0100, Markus Rosjat wrote:
> as daniel also suggested I will try the the PATH crontab approach and this
> is because scripts with a full path in the shebang seem to run anymore on
> 6.4
>
> regards
>
Yeah just checked my scripts I was referring to (they are
On Thu, Nov 15, 2018 at 09:24:10AM +0100, Martin Sukany wrote:
> Hi,
>
> you'd fix this by defining PATH variable in your crontab, or specify the
> full path to python3 interpreter instead using env.
>
> M>
>
>
As the others said, and to expand, it is probably fr
On Sat, Nov 10, 2018 at 08:29:02AM +0200, Timo Myyrä wrote:
>
> There was some error in libssl which has been already fixed.
> I did cvs up in /usr/src/lib/libssl and 'make install' in there to fix it.
> Also
> the HTTP mirrors should work too while new snapshot is made.
>
> timo
Thank you,
Example:
https://fastly.cdn.openbsd.org/pub/OpenBSD/snapshots/packages/amd64/compton-0.1_beta2p2.tgz:
ftp: SSL write error: handshake failed: error:1404C044:SSL
routines:ST_OK:internal error
signify: gzheader truncated
Basically all my packages are showing this after a doas pkg_add -uUvVm
ation of the retry
requirement to specify 'retry from the same IP address', which would
have made greylisting *a lot* easier, but unfortunately that did not
happen (cf
https://bsdly.blogspot.com/2008/10/ietf-failed-to-account-for-greylisting.html).
Cheers,
Peter
--
Peter N. M. Hansteen, membe
://bsdly.blogspot.com/2018/11/goodness-enumerated-by-robots-or.html
- TL;DR: don't download *my* nospamd, use smtpctl to generate your own :)
All the best,
Peter
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.no
On Sun, Nov 04, 2018 at 03:22:23PM +0100, Alexandre Ratchov wrote:
> IIRC, the lmms sndio-midi backend lacks the "device chooser dialog",
> so it uses "default" as midi device, which translates
> "midithru/0". Your controller is probably "rmidi/0", so lmms doesn't
> use it.
>
> You could
As an alternative could I cat rmidi0 to midithru0?
I will look into patching lmms as well.
Sent from my iPad
> On Nov 4, 2018, at 9:22 AM, Alexandre Ratchov wrote:
>
>> On Sat, Nov 03, 2018 at 02:26:59PM -0400, Ken M wrote:
>> So I am sure I am missing something stupid. Jus
On 10/30/18 8:46 PM, Chris Narkiewicz wrote:
> W dniu 30/10/2018 o 19:31, Peter N. M. Hansteen pisze:
>> yes, a well-known problem, and it's what nospamd (hinted at in the spamd
>> man pages) is for.
>>
>> To some extent it helps to whitelist IP addresses and ne
So I am sure I am missing something stupid. Just the first time I have tried a
midi controller with openbsd.
So the device shows in the dmesg
a hexdump shows I am receiving sounds
but in lmms even with a device set to receive midi, nothing happens.
And yes sound is coming from lmms.
I am
On 10/30/18 8:46 PM, Chris Narkiewicz wrote:
> W dniu 30/10/2018 o 19:31, Peter N. M. Hansteen pisze:
>> yes, a well-known problem, and it's what nospamd (hinted at in the spamd
>> man pages) is for.
>>
>> To some extent it helps to whitelist IP addresses and ne
to
fetch my hand maintained one at https://home.nuug.no/~peter/nospamd
(later parts generated by echo $domain | smtpctl spf walk, older parts
by host -ttxt $domain).
- Peter
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
http://bsdly.blogspot.com/ http://www.bsd
if that doesn't turn up the entries you were looking for.
- Peter
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.no/
"Remember to set the evil bit on all malicious network traffic"
delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.
OK found the problem, the compiled sndio bridge was in the wrong place. Found
the right place.
And the reason I post here to the group again is sndio plus vmm is awesome.
Truth is reading about sndio was my main reason for even trying out OpenBSD.
Perhaps that is an odd reasons to some, but for
On Sat, Oct 27, 2018 at 08:51:43PM +0200, David Coppa wrote:
>
> Have you installed the alsa-plugins package?
So being wary and maybe we take this off list because the problem is not openbsd
related, it is debian related and openbsd is receiving the audio fine.
In debian the alsa-plugins are
On Sat, Oct 27, 2018 at 07:23:05PM +0200, David Coppa wrote:
>
> Hi,
>
> Here's what I've done:
>
> 1) Install libsndio on the Linux guest (I've used
> http://www.sndio.org/sndio.tar.gz)
>
> 2) Compile this alsa plugin on the Linux guest:
> https://github.com/Duncaen/alsa-sndio
>
> 3) Copy
On Sat, Oct 27, 2018 at 10:15:45AM +0200, Alexandre Ratchov wrote:
> On Fri, Oct 26, 2018 at 07:49:16PM -0400, Ken M wrote:
> >
> > xfreerdp /sound:sys:sndio,dev:/dev/audio /v:host
> ^^
>
> If this is the sndio device name, it should
So I am working on a bit of an experiment. I have a debian sid guest in vmm.
xrdp is installed as is the pulse audio module for xrdp so that it can see the
xrdp output in the mixer. I can connect just fine till I try to get sound out.
Remmina wouldn't work with sound so to have more control I
example at https://home.nuug.no/~peter/pftutorial/#33 did not show up in
your search.
- P
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.no/
"Remember to set the evil bit on all malicious network tra
I just installed the latest snapshot and when I run a pkg_add it doesn't find
anything as it is trying to look in 6.4 for packages.
$ uname -r
6.4
Not sure if this is an issue in the latest snapshot or I stupidly missed some
information.
Personally I use Emacs 25.x on OpenBSD 6.3, with the caveat being that
I rely on a number of customizations to normalize behavior to be what I
expect. I would suggest using whichever version annoys you the least.
>> And I am tired that in some modes I cannot get emacs to stop
>> writing things
. The most likely explanation is
that b...@example.com is either an explicit spamtrap or fails to match
the allowed suffixes in /etc/mail/spamd.alloweddomains
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.n
On Sat, Sep 22, 2018 at 12:37:22PM -0500, Edgar Pettijohn III wrote:
>
>
> https://marc.info/?l=openbsd-misc=152381830319718=2
>
Thank you, I just went right ahead and ordered it as it hit all the marks. Much
appreciated.
Ken
Can anyone make a recommendation for the best usb wifi dongle to use with
OpenBSD.
Criteria
(in order)
1. good range
2. good speed
3. low profile/small size
I realize priority 3 is typically going to compromise the first 2 priorities, so
I guess I am looking for a balance.
Thank you
Ken
On Sat, Sep 22, 2018 at 02:51:43AM +0100, Stuart Henderson wrote:
>
> /, /usr, and /usr/X11R6 definitely contain programs that need setuid, and
> /usr/local
> is likely to in many cases. Other partitions generally don't, so you can
> mount them
> with "nosuid".
>
> While on the subject of
On Fri, Sep 21, 2018 at 11:07:55AM +, Stuart Henderson wrote:
>
> Given the permissions you showed, the most likely reason would be if
> /usr/local is mounted with the "nosuid" flag.
>
>
That was the issue, fixed that and locking works perfectly, thank you.
If I may a quick side question
On Thu, Sep 20, 2018 at 08:20:18PM -0900, Philip Guenther wrote:
> If xscreensaver decides it can't do locking, then when started it should
> write to stderr why it thinks that. Does openbox capture the stderr of the
> processes that it starts to some file you can review? If not, then stop
>
I am following -current and use openbox if it matters for my window manager.
xscreensaver is started by openbox, anyway when I try to lock, well this is what
I see:
$ xscreensaver-command -lock
xscreensaver-command: locking not enabled.
>From what I understand form the xscreensaver document that
On Sun, Sep 16, 2018 at 09:05:33AM +0300, ?? wrote:
> I deploy my django app using uwsgi and venv in my home dir
> uWSGi starts on its default port and httpd server uses this port
> to handle my app requests. Everything just like in the official manual of
> uwsgi.
>
Don't
course over the same 20+ years we've
seen developments in mail that aren't easily ignored such as SPF+DKIM+DMARC
but the motivation for running your own mail service most likely includes some
genuine interest in the topic for its own sake so you will need to take those
in stride.
- Peter
--
On a side note to this whole chain. My wife and I had another conversation about
this, and I think we are on the same page that there is no win in monitoring
their email. So I think I can stay out of the mail server business for now,
which I like.
I pointed our how her dad was a cop and what
On Sun, Sep 09, 2018 at 05:49:31PM +0100, Stuart Henderson wrote:
>
> In a nutshell, monitoring email is concentrating on what is really
> likely to be one of the less problematic areas. The others, which IMO
> are MUCH more likely to be involved if any problems do occur, are less
> amenable to
On Sun, Sep 09, 2018 at 05:46:40PM +0100, Kaya Saman wrote:
>
> Maybe your ISP has option for "Parental Control"?? I know these days it is a
> big concern so many do offer this type of service
>
>
> Just a thought??
>
As I mentioned we use OpenDNS for the home internet, which handles all
On Sun, Sep 09, 2018 at 11:24:38AM -0500, Ed Ahlsen-Girard wrote:
>
> While you should not take technical advice on mail servers from me,
> I've raised two kids to adulthood with a 17 year old to go, and had
> almost 200 foster children.
>
> The impedance mismatch you have with the missus is
On Sun, Sep 09, 2018 at 10:08:39AM +, Stuart Henderson wrote:
> Scanning for troubling words is not going to work without being able to
> see the email itself for context. Whether it's automated scanning or
> reading the mails yourself there are still privacy issues. Plus whatever
> monitoring
On Sun, Sep 09, 2018 at 08:49:26AM +, Tim Jones wrote:
> Ken,
>
> Putting all the OpenBSD evangelists to one side, there are two things to say.
>
> First, like me, you might use OpenBSD for many things. And like me, you might
> come to the conclusion that using OpenBSD for mail is not one
On Sat, Sep 08, 2018 at 09:22:01PM -0300, Friedrich Locke wrote:
> if you demand for performance, FreeBSD + Qmail-ldap is THE way to go.
>
> my 1 cent.
>
Performance is a priority, but not my first priority. In fact I think that is
why I have started becoming a convert to openbsd.
Although I do
On Sat, Sep 08, 2018 at 08:36:01PM +0100, Chris Narkiewicz wrote:
> On 08/09/2018 19:55, Ken M wrote:
> What kind of issues? I'm curious. Can you pls provide a reference?
>
Without digging them up I did a quick google on openbsd issues vultr. It pulled
some things I saw before
This is related to my mail server thread, but in googling about openbsd on vultr
I have seen some comments here and there about issues with the default image on
vultr and to use a custom image or iso instead of what they have. Some of these
seem dated and related to older versions of openbsd. My
On Sat, Sep 08, 2018 at 05:54:18PM +0200, Peter N. M. Hansteen wrote:
> On 09/08/18 17:23, Ken M wrote:
>
> If you've never run a mail server before but are familiar with OpenBSD,
> please do go the OpenBSD route.
>
> Setting up and running a mail service involves learning a fe
On Sat, Sep 08, 2018 at 10:55:40AM -0700, jungle Boogie wrote:
> Ken,
>
> Just curious, are you using pf to filter out the bad websites for you kids?
> I find that to be more challenging for our older daughter to not stumble
> into the bad stuff and not the wholesome sites like openbsd.org, which
oking, right?
man smtpd and references therein. There are also pointers in this thread
to running a full featured mail server on OpenBSD with smtpd from base.
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.no
On 09/08/18 17:23, Ken M wrote:
> Just curious how many of you use openbsd to run your own personal email
> server?
I've been running my personal domains on OpenBSD for a number of years.
So have I suspect a largish subset of the readership here, but I have no
idea how many will actuall
On Sat, Sep 08, 2018 at 11:32:00AM -0400, Jay Hart wrote:
> Ken,
>
> I've run my own email server for 15 years now I think. I stick with Linux for
> email server,
> OpenBSD for routing/firewall. I personally find this is the best of both
> worlds...
>
> Just my 35 cents...
>
> Jay
>
Dare I
Just curious how many of you use openbsd to run your own personal email server?
Do you find it a hassle to manage in any way?
I know openbsd is perfectly fine for a mail server, don't get me wrong the
question is more about is it worth it to do yourself. Specifically I will
probably be doing it
As a follow up I did manage to get everything sorted out. Redid the disk labels
and used newfs and well in single user mode had to use ed to cleanup the fstab.
After that booting bsd.rd to reinstall sets and then a restore from backup on a
usb I made of what I would be hitting and all seems well.
On Tue, Sep 04, 2018 at 10:06:52AM -0700, Chris Cappuccio wrote:
>
> Just move /usr/ports back to /usr and remount /dev/sd0g as /usr/local
A perfectly reasonable suggestion, something I thought about. I kind of want to
tweak this and learn a little bit to make things better so I am going to give
ars was a HP Microserver G8, which with a few
PCI slots, dual bge(4)s built in and IIRC 4GB memory. Ran like a charm,
and was dirt cheap for a new system at the time.
- Peter
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
http://bsdly.blogspot.com/ http://www.bsdly.net/ http:/
s most of the oddities that I have
found irritating in Windows over the years, and it comes well tuned to
Apple's hardware.
But that's me and I'm well aware that I'm weird. If you find Windows
tolerable and that's where the specific software runs best, that sounds
like the obvious choice.
- Peter
On Mon, Sep 03, 2018 at 06:11:24PM -0500, ed...@pettijohn-web.com wrote:
>
> This obviously isn't the officially recommended way to do it, but it works
> here.
>
> I put everything in my $HOME and use symlinks to trick the build system into
> thinking it's in /usr/ports, etc. Thus, no need to
On Mon, Sep 03, 2018 at 03:59:07AM +0200, Ingo Schwarze wrote:
> Hi Ken,
>
> How exactly to distribute space among partitions really depends on what
> you want to use the machine for. The disk you are showing above can be
> called terribly small nowadays (though i admit that i used disks in
>
On Sun, Sep 02, 2018 at 10:53:36AM -0700, Chris Bennett wrote:
> On Sun, Sep 02, 2018 at 04:16:57PM +, Ken M wrote:
>
> You can only do this if /usr/ports is directly after /usr.
> Use disklabel sd0 to get the positions.
>
> However, if /usr/ports is big enough and it's
OK so now that I have been saved from my stupidity, let's try to prevent more
stupidity.
$ df -h
Filesystem SizeUsed Avail Capacity Mounted on
/dev/sd0a 1005M245M710M26%/
/dev/sd0h 62.9G 21.7G 38.1G36%/home
/dev/sd0d 3.9G302K3.7G 0%
On Sun, Sep 02, 2018 at 10:46:44AM -0500, ed...@pettijohn-web.com wrote:
>
> On Sep 2, 2018 9:55 AM, Ken M wrote:
> >
> > I am backing up my config info right now and then will try that route,
> > thank you
> >
> > Sent from my iPad
> >
> > >
I am backing up my config info right now and then will try that route, thank you
Sent from my iPad
> On Sep 2, 2018, at 10:52 AM, Solène Rapenne wrote:
>
> Le 2018-09-02 16:21, Ken M a écrit :
>> So I did something careless and stupid. Don't get me started but I really
So I did something careless and stupid. Don't get me started but I really messed
up the group ownership of /usr by carelessly running a command not paying
attention. Yes I know, my stupidity.
Can anyone shoot me a quick list of what group should own what under /usr.
Sorry and thank you.
If it
Thank you
Ken
Figuring there are a good amount of members on this list that are also on
Lobste.rs.
Anyway I was hoping to get an invite to create an account there if someone
could.
Thank you,
Ken
ce is supported, my best advice is to get one of the cheapo USB
wifi dongles.
With any luck, a random part from the bargain bin at your friendly computer
thingies outlet will
be a supported device such as urtwn(4) or similar.
Good luck!
- Peter
--
Peter N. M. Hansteen, member of the first RFC
apologies for poor formatting.
>
>
> On 16 August 2018 22:09:57 "Elias M. Mariani"
> wrote:
>
>> Hi,
>> Somebody knows how to set up 2 different socks, one with php56 and
>> another with php70 ?
>> Yo can just run
>> rcctl start php56_fpm php70_f
Hi,
Somebody knows how to set up 2 different socks, one with php56 and
another with php70 ?
Yo can just run
rcctl start php56_fpm php70_fpm
Because they would use the same fpm.sock.
And this is configured in /etc/php-fpm.conf, I did not found another
place to configure this.
Cheers.
Elias.
I saw a week ago this commit from florian:
https://marc.info/?l=openbsd-cvs=153294104203261
Shouldn't this apply also to 6.3 ?
Just a doubt not a complain.
Elias.
http://www.openbsd.org/anoncvs.html
with adjustments to use the most-local mirror (for me thats the eu one).
And of course for most ports or packages, pkg_add -u is probably all you need.
If you suspect your package information could be off in some way, pkg_check
is useful too.
- Peter
--
Pete
> Check out HISTCONTROL[1] and ignorespace in particular. Adding something
> along the lines to your ~/.kshrc should do the trick:
>
> HISTCONTROL=ignorespace
> bind -m '^L'='^U clear^J^Y' # note the intentional space before clear
>
> [1] https://man.openbsd.org/ksh#
Thanks all for not making me feel like I opened a flame war can of worms.
I think the ignore dups solution is probably the most sensible for my purposes
from what I have read from all the responses.
Thank you.
Ken
/bin
PS1="[\u@\h: \W]$ "
HISTFILE=$HOME/.ksh_history
HISTSIZE=1000
export PATH HOME TERM PS1 HISTFILE HISTSIZE
# For now clearing out clear from history when starting
sed -i '/^clear$/d' $HISTFILE
bind -m '^L'=clear'^J'
# I wish this worked
# bind -m '^L'=clear'^J';sed -i '$d' $HISTFILE
a subsequent
sysmerge.
- Peter
[1]
https://bsdly.blogspot.com/2012/07/keeping-your-openbsd-system-in-trim.html
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.no/
"Remember to set the evil bit on all
i-recent article about that (and the laptop I'm typing this
on) is at https://bsdly.blogspot.com/2017/07/openbsd-and-modern-laptop.html
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.no/
"Remember to s
I will beat others to the punch and say you were looking for Ubuntu not OpenBSD.
OpenBSD is plenty easy to use, but the type of easy to use you describe with a
full desktop environment is not the target.
However installing gnome is simple enough. Several sites exist describing it. I
am guessing
the same way as the rewrite, is there a way
apart from "request strip" that I can use to change the $REQUEST_URI
so the fastcgi socket gets the value with the "/index.php" striped ?
cheers.
Elias.
2018-07-17 17:13 GMT-03:00 Elias M. Mariani :
> Hi,
> I'm trying to adapt
Hi,
I'm trying to adapt the rewrite rules of OctoberCMS to httpd.conf to
avoid using apache-httpd.
Now everything is working ok with this rules:
-
#example of directory that doesn't need to use rewrite.
location match "/themes/(.*)/assets/(.*)" {
request no rewrite
}
#index.php
learer.
Off the top of my head I can't think of anywhere more appropriate,
really, as long as it's OpenBSD's PF, not the out of date FreeBSD version.
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.no/
&quo
as come in handy when dealing with other Unix variants.
Long time misc'ers will probably forgive me pointing to my 'OpenBSD and
you' presentation (https://home.nuug.no/~peter/openbsd_and_you/) for
some further facts and some opinions of mine on the matter. Do click the
links to the references.
-
connect has a traditional serial port or is able to fake one
via something like a USB-to-serial adapter.
- Peter
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.no/
"Remember to set the evil bit on all malicio
Jul 6, 2018 5:56 PM, "Elias M. Mariani" wrote:
>>
>> Hello,
>> I'm moving some sites that my friends and I handle from a cheap
>> webserver to a cloud server with OpenBSD.
>> I have the webserver part figured out (httpd+mariadb+php7).
>> But I need to c
Hello,
I'm moving some sites that my friends and I handle from a cheap
webserver to a cloud server with OpenBSD.
I have the webserver part figured out (httpd+mariadb+php7).
But I need to choose how to handle the mails.
I'm mostly worried that the mail accounts must be managed by some of
our users
Thanks for the help guys,
I was linking, not copying resolv.conf
Fixed.
Thanks again.
Elias.
2018-06-25 13:59 GMT-03:00 Scott Vanderbilt :
> On 6/25/2018 9:37 AM, Elias M. Mariani wrote:
>
>> Does anybody knows what is needed to allow php to retrieve files while
>> under htt
Hi.
Does anybody knows what is needed to allow php to retrieve files while
under httpd chrooted ?
I recall the need of /etc/resolv.conf on the jail but that didn't work.
Cheers.
Elias.
Branching off from the CPU and X paths of analysis, have you made sure network
performance is not a factor in all this?
A tact also in the browser, is use the inspect tools to see the response time of
the request pieces. IF it is at all network related that my yield some
information.
Ken
On
On Tue, Jun 19, 2018 at 11:30:42PM +0100, Stuart Henderson wrote:
>
> If powersave is enabled, you'll see "powersave on (XXms sleep)" on the
> ieee80211: [...] line.
>
> If powersave is disabled (which is the default), nothing special is printed.
>
Good to know, thank you.
Ken
On Tue, Jun 19, 2018 at 04:53:21PM +, Stuart Henderson wrote:
>
> hostname.if(5) has this:
>
> "Any lines not matching these packed formats are passed directly to
> ifconfig(8)."
>
After reading the manpage again for hostname.if last night I spotted the way it
suggests to put uptions at
of your 1500 EUR.
- Peter
[1] https://bsdly.blogspot.com/2017/07/openbsd-and-modern-laptop.html
[2]
https://www.multicom.no/multicom-talisa-u831-black-133/cat-p/c100559/p10642670
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
http://bsdly.blogspot.com/ http://www
My thought was just to add the line
-powersave
in the file, just like I had added it to an iconfig commandline. Hostname.if man
pages don't specify anything about it that I can see.
Was my thought a stupid thought?
Ken
I posted this before, and the first time around it was pointed out I had out of
date firmware, that was addressed. Anyway I am on current, the last snapshot I
grabbed was from 6-9. These 2 errors persist in my dmesg:
error: [drm:pid0:ivybridge_set_fifo_underrun_reporting] *ERROR* uncleared fifo
It uses AVX2, so... thanks for the extra seconds. :D
Cheers.
Elias.
2018-06-09 0:43 GMT-03:00 Philip Guenther :
> On Fri, Jun 8, 2018 at 10:13 AM Elias M. Mariani
> wrote:
>>
>> I usually run long computations on OpenBSD-current, in the last few
>> days I see an up
Forgot to add: amd64, last version of current.
2018-06-08 14:12 GMT-03:00 Elias M. Mariani :
> Hi,
> Just another silly question.
> I usually run long computations on OpenBSD-current, in the last few
> days I see an upgrade in the performance of the process (in this case
> I
Hi,
Just another silly question.
I usually run long computations on OpenBSD-current, in the last few
days I see an upgrade in the performance of the process (in this case
I have 6 threads running a very optimized assembler code).
Each iteration of the code was about 14 sec. and now is around 13
So just to eliminate the off variable I updated my snapshot. Updated packages,
etc, etc
And now node works fine...
Ken
On Wed, Jun 06, 2018 at 09:28:39PM -0400, Ken M wrote:
> On Wed, Jun 06, 2018 at 09:10:59PM -0400, Thomas Frohwein wrote:
> >
> > I run ksh. Doubt that ba
le size (blocks, -f) unlimited
max locked memory (kbytes, -l) 1244372
max memory size (kbytes, -m) 3710004
open files (-n) 512
pipe size(512 bytes, -p) 1
stack size (kbytes, -s) 4096
cpu time (seconds, -t) unlimited
ma
The subject is the problem:
node -v
bash: /usr/local/bin/node: Cannot allocate memory
I am on current, last grabbed the snapshot last Friday I think.
Plenty of swap and memory available
vmstat
procsmemory pagedisk traps cpu
r s avm fre flt re
oo-can-be-evil-network.html
- but do note that once you have 'keep state' or similar with specific
options on a rule, remember to append pflow to the list of options.
- Peter
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
http://bsdly.blogspot.com/ http://www.bsdly.net/ ht
a pattern where the traffic
originated. It could be down to some common misconfiguration, maybe even
too many naive followers of a slightly misguidedly written HOWTO somewhere.
- Peter
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
http://bsdly.blogspot.com/ http
It happens right after these 2 lines:
error: [drm:pid0:ivybridge_set_fifo_underrun_reporting] *ERROR* uncleared fifo
underrun on pipe A
error: [drm:pid0:intel_cpu_fifo_underrun_irq_handler] *ERROR* CPU pipe A FIFO
underrun
After those display the system seems to hang for about 30-40 seconds
I know Bluetooth support was pulled, but I was wondering if there was any new
information about it being rekindled in some fashion. My primary interest is the
bluetooth audio side.
If there is or isn't I would be interested in helping to make it happen. Not
sure I am the best person to code it,
Great explanation,
Thanks.
Elias.
2018-05-24 15:59 GMT-03:00 Sebastian Benoit <benoit-li...@fb12.de>:
> Elias M. Mariani(marianiel...@gmail.com) on 2018.05.24 15:45:15 -0300:
>> Thanks Sebastian for the reply,
>> I do follow source-changes, just that I don't underst
that one of
the packages of x did it.
Cheers.
Elias.
2018-05-24 15:26 GMT-03:00 Sebastian Benoit <benoit-li...@fb12.de>:
> Elias M. Mariani(marianiel...@gmail.com) on 2018.05.24 14:22:35 -0300:
>> Hi,
>> I noticed just now a couple of errors after updating from
>
201 - 300 of 1655 matches
Mail list logo
