established. What did
I overlook here?
Looks like ipsec.conf(5) was not loaded, see the manpage, paragraph
4 of
DESCRIPTION.
Hi,
ipsec=YES is set in rc.conf.local:
# cat /etc/rc.conf.local
isakmpd_flags="-K"
ipsec=YES # IPsec
OK, then let's go back to you
;> I overlook here?
>>
>> Looks like ipsec.conf(5) was not loaded, see the manpage, paragraph
>> 4 of
>> DESCRIPTION.
>
> Hi,
>
> ipsec=YES is set in rc.conf.local:
>
> # cat /etc/rc.conf.local
> isakmpd_flags="-K"
> ipsec=YES # I
Am 2017-12-06 18:26, schrieb Jeremie Courreges-Anglas:
On Wed, Dec 06 2017, Bernd <be...@kroenchenstadt.de> wrote:
Hi @misc,
I'm trying to set up a site-to-site IPSec tunnel. I'm using vanilla
OpenBSD 6.2 amd64 (dmesg below).
My /etc/ipsec.conf looks like this:
ike esp from any to an
On Wed, Dec 06 2017, Bernd <be...@kroenchenstadt.de> wrote:
> Hi @misc,
>
> I'm trying to set up a site-to-site IPSec tunnel. I'm using vanilla
> OpenBSD 6.2 amd64 (dmesg below).
>
> My /etc/ipsec.conf looks like this:
>
> ike esp from any to any peer x.y.z.0/27 \
Hi @misc,
I'm trying to set up a site-to-site IPSec tunnel. I'm using vanilla
OpenBSD 6.2 amd64 (dmesg below).
My /etc/ipsec.conf looks like this:
ike esp from any to any peer x.y.z.0/27 \
main auth hmac-sha2-256 enc aes-256 group modp2048 \
psk "myverygoodsecretPSK"
(As can
Hi all,
i having ipsec.conf like this:
ike esp from 10.200.136.0/21 to any \
local 10.64.135.246 peer 10.4.57.68 \
main auth hmac-sha1 enc aes group modp1024 \
quick auth hmac-sha1 enc aes group modp1024 \
psk b9278b3051cd17674305833971c22b11514eac51
o say the idea of filtering enc traffic no longer makes sense and to
remove the section. or to tell you what's in ipsec.conf(5) is correct,
and why.
until that happens, the text will remain, i think.
jmc
>
> Index: sbin/ipsecctl/ipsec.conf.5
> ======
192.168.3.1 to 192.168.3.2
pass in on sk0 from 10.0.2.0/24 to 10.0.1.0/24 \
keep state (if-bound)
pass out on sk0 from 10.0.1.0/24 to 10.0.2.0/24 \
keep state (if-bound)
Index: sbin/ipsecctl/ipsec.conf.5
===
RCS file
] <> [inet] <> [gw2] <-- vlan20 --> [srv]
> > IPsec=
>
> i think you should provide more details of your setup first. for
> example, ipsec.conf(5) shows pf rules for ipencap but you only provide a
> small snippet of
IPsec=
>
> During the testing I think I've found a flaw in ipsec.conf(5). According
> to the man page the esp packets need to be passed on interface sk0:
>
> block on sk0
> block on enc0
>
> pass in on sk0 proto udp from 192.168.3.2 to 192.168.3.1 \
>
Am 24.05.2016 10:53 schrieb Bruno Flueckiger:
As a result of my tests I've created the diff below for ipsec.conf(5).
Is
this ok or did I miss something?
You missed the 'set skip on enc0' a bit up.
--
pb
Hi,
I've tested IPsec connections in my lab. The setup looks like this:
[cli] <-- vlan10 --> [gw1] <> [inet] <> [gw2] <-- vlan20 --> [srv]
IPsec=
During the testing I think I've found a flaw in ipsec.conf(5). According
16:38:54 - 1.83
+++ ipsec.4 18 Mar 2016 20:51:05 -
@@ -378,6 +378,7 @@ allocations).
.\".Xr ipcomp 4 ,
.Xr options 4 ,
.Xr iked 8 ,
+.Xr ipsec.conf 5 ,
.Xr ipsecctl 8 ,
.Xr isakmpd 8 ,
.Xr sysctl 8
> From: "Jason McIntyre" <j...@kerhand.co.uk>
> To: "misc" <misc@openbsd.org>
> Sent: Friday, March 18, 2016 5:40:07 PM
> Subject: Re: reference ipsec.conf in ipsec.4 under SEE ALSO?
> On Fri, Mar 18, 2016 at 04:59:29PM -0400, Rob Pierce wrote:
&g
+378,7 @@ allocations).
> .\".Xr ipcomp 4 ,
> .Xr options 4 ,
> .Xr iked 8 ,
> +.Xr ipsec.conf 5 ,
> .Xr ipsecctl 8 ,
> .Xr isakmpd 8 ,
> .Xr sysctl 8
Hi all,
I'm running OpenBSD 5.8-stable. The ipsec.conf manpage indicates that if no
srcid is present in an automatic keying IKE statement, then the value in the
identification should be the host IP address, and be an IP address type. I've
found this to be incorrect; if no srcid is specified, my
As far as I can tell, if a commented line on ipsec.conf ends with \
then the following line will also be considered a comment (if the next
line also ends with \ the commenting is propagated). For example
#ike esp from A.A.A.A to C.C.C.C \
ike esp from A.A.A.A to B.B.B.B \
srcid
On Wed, Mar 19, 2014 at 10:22:43AM +, Zé Loff wrote:
As far as I can tell, if a commented line on ipsec.conf ends with \
then the following line will also be considered a comment (if the next
line also ends with \ the commenting is propagated). For example
#ike esp from A.A.A.A
On 2014-03-19, Zé Loff zel...@zeloff.org wrote:
As far as I can tell, if a commented line on ipsec.conf ends with \
then the following line will also be considered a comment (if the next
line also ends with \ the commenting is propagated). For example
#ike esp from A.A.A.A to C.C.C.C
On 3/19/14 6:22 AM, Zé Loff wrote:
As far as I can tell, if a commented line on ipsec.conf ends with \
then the following line will also be considered a comment (if the next
line also ends with \ the commenting is propagated). For example
#ike esp from A.A.A.A to C.C.C.C \
ike esp from
Hello,
I've one question. Is it possible to configure two or more srcnat values
for one tunnel?
I've to hide two of our subnets behind one subnet in a tunnel to a customer.
Example:
ike esp from 10.30.172.32/29 (10.77.3.0/24,172.30.0.0/16) to 10.78.1.0/24
Is this possible?
Thanks.
Hi,
Does anyone have any ideas on this? How can we configure isakmpd to
only listen on certain IP addresses to avoid this limitation when it
tries to listen on *every* IP address?
I see listen-on in isakmpd.conf, but we are using ipsec.conf and I
understand these are mutually-exclusive
stability tweaks help someone in return for the
misc@ noise Ha
Cheers, Andy.
Thanks Rogier...
On 17/02/14 17:10, Rogier Krieger wrote:
It's been a while since I tried, but I seem to recall my setup ran
happily with a (minimal) isakmpd.conf and ipsec.conf.
I kept my settings limited
andy(a...@brandwatch.com) on 2014.02.12 12:22:57 +:
Hi,
I think this is a fairly simple one.
Our firewalls are growing in complexity and the number of interfaces and
IPs as time goes on, and we recently hit an isakmpd limit.
When isakmpd starts it tries to bind to *every* single IP
side *unless* it is the
carp master. Makes perfect sense..
On the master, isakmpd starts in passive, discovers it is master and so
reads and loads ipsec.conf, and starts negotiating with other side
On the backup, isakmod starts in passive, does nothing more.
If a failover occurs however, the VPNs do
Original message from Stuart Henderson at 26-9-2013 23:58
On 2013-09-26, Daniel Polak dan...@sys.nl wrote:
I'd like to see how isakmpd interprets the settings in ipsec.conf and
isakmpd.conf and would like to compare those interpretations.
ipsecctl -nvf /etc/ipsec.conf shows the settings
On 9/27/13 10:46 AM, Daniel Polak wrote:
What would have helped me solve this is a way to see what the current
configuration of isakmpd looks like (irrespective of whether it was
loaded from isakmpd.conf or from ipsec.conf).
It appears there is no equivalent of a C get all command to the FIFO
On a computer running OpenBSD 5.3 system I am migrating from an
isakmpd.conf based configuration to an ipsec.conf based configuration.
The tunnel comes up and works correctly when using isakmpd.conf but I
can't get the tunnel to come up when I use ipsec.conf.
As far as I can see ipsec.conf
configuration to an ipsec.conf based configuration.
The tunnel comes up and works correctly when using isakmpd.conf but I can't
get the tunnel to come up when I use ipsec.conf.
As far as I can see ipsec.conf contains the same settings as the settings
that are in isakmpd.conf.
The error message
On 2013-09-26, Daniel Polak dan...@sys.nl wrote:
On a computer running OpenBSD 5.3 system I am migrating from an
isakmpd.conf based configuration to an ipsec.conf based configuration.
The tunnel comes up and works correctly when using isakmpd.conf but I
can't get the tunnel to come up when
a simple 'pass on enc0 tagged PBX'
after that. If I was too optimistic or misunderstood ipsec.conf(5), a
cluebat is more than welcome. If this is something that should work, I'll
try with -current as well.
Regards,
Rogier
# tcpdump -ni pflog0 -s1600 -eee -ttt -v
Jun 11 13:36:47.049079 rule 0
table.
I expected ipsec to automagically add the 'PBX' tag to traffic it gets
handed (in this case, from $if_int) when that traffic fits its SAs. I
further expected pf to need no more than a simple 'pass on enc0 tagged PBX'
after that. If I was too optimistic or misunderstood ipsec.conf(5
On Tue, Jun 11, 2013 at 3:26 PM, mxb m...@alumni.chalmers.se wrote:
Tried to tag pkts on $int_if ? Eg
match in on $if_int from ($if_int:network) to $pbx_net tag PBX
Yes and that works. But shouldn't it already be covered by the 'PBX' tag in
ipsec.conf?
That's what I expected and what I'm
From ipsec.conf(5):
… Add a pf(4) tag to all packets of phase 2 SAs created for this connection. …
As I understand it, in your case or any other cases, it is about tagging pkts
from one peer to another.
Eg. from one vpn_gw to another.
But this is my understanding of this. I might be wrong here
as expected, outbound traffic appears to be blocked on enc0. What bugs me
is that the 'tag' and 'tagged' keywords do not seem to work as I'd expect
from ipsec.conf(5).
I created the SAs with the 'PBX' tag and would like to be so lazy as to
just use:
pass on enc keep state (if-bound) tagged PBX
aes group modp2048 \
quick auth hmac-sha2-256 enc blowfish \
psk super secret string
ipsecctl complains of a syntax error.
If anyone has a link to an ipsec.conf that has an example of using UFQDNs to
identify peers I would be eternally grateful. It seems nearly every example
just
hi, I've setup a roadwarrior ipsec/l2tp (undeadly guide) that worked fine
until I made some new rules in ipsec.conf in order to get a vpn-connection to
a FreeBSD machine to work.
My ipsec.conf looks like this. When connecting from a roadwarrior ip I still
goes to the crypto that it supposed
to update the other side...
hi stuart
having reread your first post on the subject,
i now realize when the address of one side changes
it's the*other* side that needs to update remote_gw in ipsec.conf and
restart.
i was considering each end running a script which used ping to check
connectivity
On 2012-05-08, shadrock shadr...@ntlworld.com wrote:
hi stuart
thanks for your answer and advice,
i am working on a modified ddns update script to signal a restart of
isakmpd when the dynamic ip changes, will implement isakmpd else will
follow your suggestion and use openvpn for my net to
hi stuart
thanks for your answer and advice,
i am working on a modified ddns update script to signal a restart of
isakmpd when the dynamic ip changes, will implement isakmpd else will
follow your suggestion and use openvpn for my net to net link, i had
already planned to use openvpn for my
On 2012-05-04, shadrock shadr...@ntlworld.com wrote:
firewall dual homed
network facing static nic address = 5.5.5.4 (rfc1918/rfc6598)
virgin media router facing static nic address = 3.3.3.2
(rfc1918/rfc6598)
virgin media router static address = 3.3.3.3 (rfc1918/rfc6598)
--
network_a ipsec.conf
# Macros
local_gw= local_addr # External interface
local_net = 5.5.5.0/24 # Local private network
remote_gw = remote_addr # Remote IPsec gateway
remote_nets = 7.7.7.0/24 # Remote private networks
# Set up the VPN between the gateway machines
ike esp from
--
network_a ipsec.conf
# Macros
local_gw= local_addr# External interface
local_net = 5.5.5.0/24 # Local private network
remote_gw = remote_addr # Remote IPsec gateway
remote_nets = 7.7.7.0/24# Remote private networks
# Set up the VPN between the gateway machines
for vpn passthrough
network_a connects to firewall_a via a switch
firewall_a connects to router_a via a switch
router_a connects to virgin media cable
--
network_a ipsec.conf
# Macros
local_gw= local_addr# External interface
local_net = 5.5.5.0/24 # Local private network
nic address = 4.4.4.2
virgin media router static address = 4.4.4.4
virgin media dynamic wan address = 2.2.2.2
both firewalls run ipsec
both routers configured foe vpn passthrough
--
network_a ipsec.conf
# Macros
local_gw= local_addr # External interface
local_net
Hello @misc,
I'm lost in the documentation of isakmpd.conf and ipsec.conf :-(
Situation:
I have to set up several ipsec-connections on one system on my side
(OBSD 5) to different sites with different VPN-hardware.
All external sites offer only PSKs in configuration, no certificates.
Problem
Andre Ruppert a...@in-telegence.net wrote:
is there any chance (perhaps in the future) to integrate lifetime
parameters via ipsecctl -- ipsec.conf or will I be forced to keep on
using isakmpd.conf?
There is lifetime code in ipsecctl. I don't know if its absence
from the man page
On 2012-04-11, Christian Weisgerber na...@mips.inka.de wrote:
Andre Ruppert a...@in-telegence.net wrote:
is there any chance (perhaps in the future) to integrate lifetime
parameters via ipsecctl -- ipsec.conf or will I be forced to keep on
using isakmpd.conf?
There is lifetime code
On Thu, Apr 05, 2012 at 05:53:27AM +0530, Girish Venkatachalam wrote:
Dear all,
Such a silly thing is not documented anywhere, no vpn(8) man page and
not on the Internet.
Subject: Manual IPsec setup with ipsec.conf
have you looked at the manual page for ipsec.conf?
jmc
with ipsec.conf
have you looked at the manual page for ipsec.conf?
jmc
Sorry I did not mean to antagonize.
I did read the section. But an example would be a great addition.
-Girish
--
G3 Tech
Networking appliance company
web: http://g3tech.in mail: gir...@g3tech.in
and
not on the Internet.
Subject: Manual IPsec setup with ipsec.conf
have you looked at the manual page for ipsec.conf?
jmc
Sorry I did not mean to antagonize.
I did read the section. But an example would be a great addition.
well, there are examples of both
and
not on the Internet.
Subject: Manual IPsec setup with ipsec.conf
have you looked at the manual page for ipsec.conf?
jmc
Sorry I did not mean to antagonize.
I did read the section. But an example would be a great addition.
Interesting, hasn't been somewhere
- Original Message -
From: Girish Venkatachalam girishvenkatacha...@gmail.com
To: OpenBSD general usage list misc@openbsd.org
Sent: Wednesday, April 4, 2012 8:23:27 PM
Subject: Manual IPsec setup with ipsec.conf
Dear all,
Such a silly thing is not documented anywhere, no vpn(8
On 04/04/2012 08:23 PM, Girish Venkatachalam wrote:
# ipsecctl -sa -v
FLOWS:
flow esp in from 10.1.23.0/24 to 192.168.1.0/24 peer 173.167.82.52 type
require
flow esp out from 192.168.1.0/24 to 10.1.23.0/24 peer 173.167.82.52 type
require
flow esp in from 173.167.82.52 to 59.99.242.167 peer
Dear all,
Such a silly thing is not documented anywhere, no vpn(8) man page and
not on the Internet.
I am forced to send this mail though it is embarrassing having worked on the
internals of manual IPsec keying back in 2004. But well here goes.
on peer A:
remoteip=173.167.82.52
I am converting over to ipsec.conf from isakmpd.conf|policy.
I have a default vpn configuration to allow people from their home pc
to access. Under isakmpd.conf it works perfectly well. I can use
any number of settings, including the desired aes-256 for both phase
1 and phase 2.
My
On 2011-12-15, nuffnough nuffno...@gmail.com wrote:
ike dynamic from any to 10.10.10.0/24 \
try: ike passive esp from 10.10.10.0/24 to any
ps. ipsecctl -nvf /etc/ipsec.conf
Hi,
I am converting a bunch of VPNs from my isakmpd.[conf|policy] files to
ipsec.conf mostly because it seems they're deprecated, but partly
because I saw an old thread that spoke of functionality I want to
explore.
I figured I should work through them one by one. I got my own VPN
from one
Hello!
In transitioning from isakmpd.conf to ipsec.conf I want to make the
configuration file simple and readable by using macros.
However, I seems like I can not make use of macros in the way that I want.
Example:
host_a=192.168.1.1
host_b=192.168.2.2
host_list={ $host_a $host_b }
host_a_copy
to a situation where we need access to customer's network from
two internal networks. I added an ipsec rule identical to the working
one with the different local net defition (se the ipsec.conf sample
below) and discovered that only the second rule is actually applied.
You can only have one ipsec.conf
internal networks. I added an ipsec rule identical to the working
one with the different local net defition (se the ipsec.conf sample
below) and discovered that only the second rule is actually applied.
ipsecctl -vvf /etc/ipsec.conf shows that both the rules are parsed
without errors. ipsecctl
in 4.2/i386, number-only macros in ipsec.conf worked fine/parsed
OK, syntax-wise:
---
# cat test.conf
cat = dog
cow = $cat
cat = 1234abc
cow = $cat
cat = 1234
cow = $cat
# uname -msr; ipsecctl -nvvf ./test.conf
OpenBSD 4.2 i386
cat = dog
cow = dog
cat = 1234abc
cow = 1234abc
cat = 1234
cow
for what it's worth, pfctl in -current parses this situation fine,
but ipsecctl does not:
# cat cow.conf
cow = 'moo'
moo = $cow
cow = '1234'
moo = $cow
cow = ' 1234 '
moo = $cow
cow = '12a34'
moo = $cow
# ipsecctl -nvf ./cow.conf
cow = moo
moo = moo
cow = 1234
./cow.conf: 4: syntax error
cow
i went on and tested '-nvf ./cow.conf' in each of:
bgpd, ldapd, ldpd, ospfd, relayd, ripd, snmpd, smtpd, ypldap.
they all errored out only exactly on lines 4 and 6
m4(1) seems to parse the file fine though.
assuming these are all supposed to be consistent,
is pfctl/m4 the way
On Thu, Jul 22, 2010 at 08:05:55PM -0600, Theo de Raadt wrote:
i went on and tested '-nvf ./cow.conf' in each of:
bgpd, ldapd, ldpd, ospfd, relayd, ripd, snmpd, smtpd, ypldap.
they all errored out only exactly on lines 4 and 6
m4(1) seems to parse the file fine though.
On Thu, Jul 22, 2010 at 07:43:55PM -0701, jared r r spiegel wrote:
is this specific behaviour
the way of the future or accidental?
if it helps answer that, ipsecctl/parse.y r1.126 (first ipsecctl/parse.y
of 4.2-current) is the first revision that all-number macros can't be
used in
and matching ingress flows by using the following
ipsec.conf(5) file on bridge1:
esp from 1.2.3.4 to 4.3.2.1 spi 0x4242:0x4243 \
authkey file auth1:auth2 enckey file enc1:enc2
flow esp proto etherip from 1.2.3.4 to 4.3.2.1
I was curious
I am trying to set up an ipsec bridge using the template and
instructions found in the brconfig man page (OpenBSD 4.6):
Create Security Associations (SAs) between the external IP
address of
each bridge and matching ingress flows by using the following
ipsec.conf(5) file
Hi,
I hope someone on-list can give me a few helpful pointers in the right
direction.
I've setup certs as per X509 AUTHENTICATION section of the
isakmpd man page.
However it is a bit unclear as to what I need to put in
ipsec.conf to make this work. I've tried a bit of Google trawling, however
dstid
b...@example.com \
+psk another_very_long_and_complicated_key \
tag RoadRunner
I am greeted with the following wise words :
# ipsecctl -f /etc/ipsec.conf
/etc/ipsec.conf: 50: default peer psk mismatch
/etc/ipsec.conf: 50: default
peer dstid mismatch
Delete my newly added block and it's
connections).
to get a better understanding: try 'ipsecctl -nvf /etc/ipsec.conf'
and compare the output with the two rules; notice which section
the psk appears in and try setting an address with 'peer 1.1.1.1'
instead of 'peer any' to see what happens.
Thanks for the wise words Stuart.makes sense now !
Stuart Henderson
wrote :
you can only have one peer any configured. therefore if you
want
to have users connecting from unknown addresses, they must
either use the
same psk, or use keys instead.
Hi,
I'm running an IPSEC setup using iskampd.conf + isakmpd.policy, and
would like to move to using ipsec.conf instead.
First off, I noticed that, if isakmpd is running w/o the '-K' switch,
running 'ipsecctl -f somefile' results in a problem accessing
/var/run/isakmpd.fifo, with a file does
Hi,
On Sun, 24.01.2010 at 17:47:22 +0100, Toni Mueller openbsd-m...@oeko.net
wrote:
First off, I noticed that, if isakmpd is running w/o the '-K' switch,
running 'ipsecctl -f somefile' results in a problem accessing
/var/run/isakmpd.fifo, with a file does not exist error.
scratch that - this
On Aug 10, 2009, at 6:37 PM, Christopher Sean Hilton wrote:
I have a couple of questions regarding setting up ipsec.
I've read the 4 minutes page and modified the older setup to work
with 2 OpenBSD 4.5 boxes. That's enough to get me going with an
IPsec tunnel by IP addresses but one side
I have a couple of questions regarding setting up ipsec.
I've read the 4 minutes page and modified the older setup to work
with 2 OpenBSD 4.5 boxes. That's enough to get me going with an IPsec
tunnel by IP addresses but one side of my connection is a consumer
grade DSL line which wants to
On Mon, Aug 10, 2009 at 06:37:41PM -0400, Christopher Sean Hilton wrote:
I have a couple of questions regarding setting up ipsec.
I've read the 4 minutes page and modified the older setup to work with
2 OpenBSD 4.5 boxes. That's enough to get me going with an IPsec tunnel
by IP addresses
this would be done with ipsec.conf? I
have previously configured a similar setup using isakmpd.conf, but the
examples for ipsec.conf only seem to address cases where both ends
have hostnames or IP addresses that are known. In this case I don't
have any idea of the client (except the cert).
Anyone
this would be done with ipsec.conf? I
have previously configured a similar setup using isakmpd.conf, but the
examples for ipsec.conf only seem to address cases where both ends
have hostnames or IP addresses that are known. In this case I don't
have any idea of the client (except
I used to configure VPNs using isakmpd.conf, for 2 dozen VPNs, each with
a hand crafted set of parameters ( encryption, hmac, key length etc. ).
Now I tried to move this setup to ipsec.conf by spelling out the
complete line for every VPN like this:
ike active esp tunnel from a.b.c.d to e.f.g.h
clients, but they have to have all the same
configuration (ie, the least common denominator wins).
Since people recommend using ipsec.conf, I wanted to transform this
setup to using ipsec.conf. In my ipsec.conf, I have:
myip=1.2.3.4
ike passive esp tunnel from $myip to any \
main auth hmac
Hi list,
I have a firewall using the - very elegant - ipsec.conf to build tunnels
to various Cisco's, Watchguards and other OpenBSD machines. My
/etc/ipsec.conf is autogenerated and contains lots of:
# bla-bla.router.company.example - router for location bla-bla
ike esp from 192.168.100.0/24
On Mon, May 05 2008 at 20:14, Prabhu Gurumurthy wrote:
All,
I have a question regarding ipsec.conf.
Example:
IPsec peers: 3.3.3.3, 3.3.3.2
Interesting traffic: 1.1.1.1 - 192.168.100.2
2.2.2.2 - 192.168.100.0/24
Main/Quick mode crypto/groups being: aes, sha1
All,
I have a question regarding ipsec.conf.
Example:
IPsec peers: 3.3.3.3, 3.3.3.2
Interesting traffic: 1.1.1.1 - 192.168.100.2
2.2.2.2 - 192.168.100.0/24
Main/Quick mode crypto/groups being: aes, sha1 and group2
PSK being test123
How can I define the above concisely
Dear list,
I have a firewall and an ipsec.conf with 42 ike esp connections:
ike esp from 192.168.100.0/24 to 192.168.129.0/24 peer my.firewall \
main auth hmac-sha1 enc 3des group modp1024 \
quick auth hmac-sha1 enc 3des group modp1024 \
psk mekmitasdigoat tag yet.another.connection
ISAkmpd
On Sun, Feb 10, 2008 at 10:43:36PM +0100, Aurilien wrote:
In the [manual flows] section of the ipsec.conf man page, the [type
modifier] parameter doesn't explain require, use, acquire and dontacq
modifiers. The explanation from the old ipsecadm(8) should be use:
fixed now. thanks
In the [manual flows] section of the ipsec.conf man page, the [type
modifier] parameter doesn't explain require, use, acquire and dontacq
modifiers. The explanation from the old ipsecadm(8) should be use:
A use flow, specify that packets matching this flow should try to use IPsec
if possible
does any have an example ipsec.conf config for a windows shrew.net
ipsec client ? in particular, a roaming client?
--
It is an old observation that the best writers sometimes disregard the rules of
rhetoric. When they do, however, the reader will usually find in the sentence
some compensating
As far as I can tell, currently in ipsec.conf there is no way to use AES
with KEY_LENGHT=256. Is anybody working on adding this? Otherwise I might
try it when the time permits.
I'm thinking that isakmpd should first learn about a new default transform,
let's say AES256 - then adding
On Mon, Nov 19, 2007 at 12:26:16PM +0100, Mitja Mu?eni? wrote:
As far as I can tell, currently in ipsec.conf there is no way to use AES
with KEY_LENGHT=256. Is anybody working on adding this? Otherwise I might
try it when the time permits.
I'm thinking that isakmpd should first learn about
From: Heinrich Rebehn [EMAIL PROTECTED]
Date: 29 October 2007 9:14:16 PM
To: OpenBSD misc@openbsd.org
Subject: Hoe to specify multiple transform suites in ipsec.conf(5)
Hello list,
I am trying to move my IPsec configuration from isakmpd.conf to
ipsec.conf.
However i cannot find a syntax
Damon McMahon wrote:
From: Heinrich Rebehn [EMAIL PROTECTED]
Date: 29 October 2007 9:14:16 PM
To: OpenBSD misc@openbsd.org
Subject: Hoe to specify multiple transform suites in ipsec.conf(5)
Hello list,
I am trying to move my IPsec configuration from isakmpd.conf to
ipsec.conf.
However i
Hello list,
I am trying to move my IPsec configuration from isakmpd.conf to ipsec.conf.
However i cannot find a syntax to specify multiple transform suites with
ipsec.conf
I tried something like:
ike passive esp from any to any quick enc {aes,3des}
but it is rejected.
I want something like
Hi,
is AES 256 cipher supported in OBSD 4.1 ipsec implementation?
If it is, how can I specify this as input to ipsecctl ( ipsec.conf )?
regards
Christoph
What is the proper format for entering manual keys directly into the
ipsec.conf file?
Test file ipsec.test:
esp from 10.0.0.1 to 10.0.1.1 \
spi 0x1011:0x1010 \
auth hmac-sha1 enc aes \
authkey 1234567890123456789012345678901234567890 \
enckey 12345678901234567890123456789012
On 2007/09/13 11:43, Jeff Simmons wrote:
What is the proper format for entering manual keys directly into the
ipsec.conf file?
Test file ipsec.test:
esp from 10.0.0.1 to 10.0.1.1 \
spi 0x1011:0x1010 \
auth hmac-sha1 enc aes \
authkey 1234567890123456789012345678901234567890
(a python program) it keeps the DynDns.org DNS servers
up-to-date when a IP change occurs. So far, so good.
I was hoping to simply use the DynDns host name in the IPSEC.CONF
file, but that doesnt seem to work :-(( .
For this mail I changed the name to remote5.dyndns.org. The real
name pings ok can Ii
was hoping to simply use the DynDns host name in the IPSEC.CONF
file, but that doesnt seem to work :-(( .
For this mail I changed the name to remote5.dyndns.org. The real
name pings ok can Ii can use it to SSH into the machine.
#
# IPSEC to remote location 5
# Active host, remote location
Has anyone got ipsec.conf/ipsecctl to interop with Windows XP? I had this
working flawlessly with my isakmpd.conf, but rather like the new syntax and
want to switch.
I have it to the point of giving me this message when I start isakmpd with
'-K -d -vvv'
090413.992346 Default isakmpd: phase 1
1 - 100 of 149 matches
Mail list logo