On Wed, 15 Feb 2006, Pailloncy Jean-Gerard wrote:
Second part of the test, I set up a bridgename.bridge0 file with
the 2 nics up
with STP, and I restart the soekris. Few seconds after the end of
the boot
(login prompt) immediate reboot of the soekris.
I stop it by, as soon as login prompt
So something like this?
[ISP]
|
[SW1][SW2]
||
| +--+
[SKR]
Yes. I want something redundant, there is a loop somewhere.
I want to test the soekris as a bridge with 3 links: one to my
provider, one to each switch.
I start the test by
On Wed, 15 Feb 2006 23:58:32 -0800
A Rossi [EMAIL PROTECTED] wrote:
What a multitude of options I have! I'll probably end up not reporting
these solutions to my client, so that he'll use a more traditional
backup method.
The OpenAFS solution would be nice, if I could find it in package
Hi all,
I was trying to install Python 2.3 from OpenBSD 3.8 ports for
http://www.jackal-net.at/tiki-read_article.php?articleId=1
The install did not succeed and I got an error message.
Could someone please help me troubleshoot it?
The error messagr is shown below
# cd
Hello,
my Soekris receives its WAN configuration with dhclient and serves as
a NAT router for my home LAN.
I need to forward DNS queries from the LAN to the WAN. I use pdnsd
for this and it works like a charm.
The problem that I have is: dhclient generates the DNS information
that it receives
On Thursday 16 February 2006 00:41, Marco Peereboom wrote:
It sounds like the firmware hung. What were you doing at the time?
Nobody was there at the time the machine hung.
This is our production web server : it runs httpd and pure-ftpd
(pure-ftpd is only accessible locally so it's most
On Thu, Feb 16, 2006 at 12:43:15PM +0530, Siju George wrote:
Hi all,
I was trying to install Python 2.3 from OpenBSD 3.8 ports for
http://www.jackal-net.at/tiki-read_article.php?articleId=1
The install did not succeed and I got an error message.
Could someone please help me troubleshoot
On Thursday 16 February 2006 17:22, Bernd Schoeller wrote:
Hello,
my Soekris receives its WAN configuration with dhclient and serves as
a NAT router for my home LAN.
I need to forward DNS queries from the LAN to the WAN. I use pdnsd
for this and it works like a charm.
The problem that
Bernd Schoeller on 2006-02-16 10:22:00 +0100:
If I use supersede (in dhclient.conf) or dhclient.conf.tail, this work
fine, but the information gathered by dhclient is lost.
You want 'prepend'.
Hello,
I recently got a fujitsu siemens compactflash (with pcmcia connector)
connect2air gprs card.
I've almost never used ppp and do not know how to setup it the ppp.conf to use
the connect2air gprs card to dial a gprs connection.
I would really appreciate if someone could send me his
Si vous ne visualisez pas ce message, cliquez ici
[IMAGE]
[IMAGE]
[IMAGE]
[IMAGE]
Cartes de visite
[IMAGE]
250 GRATUITES
[IMAGE]
Calendriers 2006 Aimantis
[IMAGE]
10 GRATUITS au lieu de 12,99â¬
[IMAGE]
Dipliants
[IMAGE]
25 GRATUITS au lieu de 39,99â¬
[IMAGE]
Itiquettes
On 2/16/06, steven mestdagh [EMAIL PROTECTED] wrote:
On Thu, Feb 16, 2006 at 12:43:15PM +0530, Siju George wrote:
Hi all,
I was trying to install Python 2.3 from OpenBSD 3.8 ports for
http://www.jackal-net.at/tiki-read_article.php?articleId=1
The install did not succeed and I got an
Good afternoon gentlemen.
Just curious if someone had the following issue:
- Setup: 1 machine with an atheros PCMCIA card and a PCI-PCMCIA bridge
as nat gateway on OBSD3.8.
Nat gateway machine has 2 internal interfaces (re0, re1) and
one external (ath0)
1 lovely windows
Some additional info. this line showed up under /var/log/daemon:
Feb 16 14:17:56 bauer dhclient[7009]: buf_read (connection closed): No
such file or directory
Feb 16 14:17:56 bauer dhclient[7009]: exiting.
dhclient is indeed dead.
I would expect dhclient to stop working if the interface it's
Hi community,
I reply to myself : wonderfull. I've setup a full KDE environment in
half-a-day. I remember some Gentoo days where I had to wait sometimes
for days for the same thing (that crashes because I was so aggressive
with gcc optimisation :)
I really enjoy to discover that OpenBSD is also
Hi,
On 2006.02.16, at 6:58 PM, A Rossi wrote:
My apologies to those of you who use console-based mail clients. I'm
still trying to figure out how to get Thunderbird to wrap my text
at 72
characters. Yes, I know about the setting under Tools Options, but
that doesn't seem to be working
Antoine Jacoutot [EMAIL PROTECTED] wrote:
Any news about the possible inclusion of mergemaster/mergeslave into the base
system ?
I've shelved this for 3.9 since I haven't gotten around to evaluating
mergeslave yet.
--
Christian naddy Weisgerber [EMAIL PROTECTED]
Selon Christian Weisgerber [EMAIL PROTECTED]:
I've shelved this for 3.9 since I haven't gotten around to evaluating
mergeslave yet.
Great, thanks. I'm happy this was not a rejected idea :-)
--
Antoine
Hi.
Under OpenBSD, the Kerberos documentation sometimes refer to the config file as
/etc/krb5.conf or /etc/kerberosV/krb5.conf. Are both locations ok or is it an
error ?
For info, /etc/krb5.conf is mentioned in:
krb5.conf(5)
kinit(1)
heimdal.info
I've always used /etc/kerberosV/krb5.conf, but I
On 2006.02.17, at 1:37 AM, Shane J Pearson wrote:
I use this marker in my sig and newline manually in Apple Mail because
I haven't found out how to make Apple Mail wrap at 72.
For any OSX Mail and OpenBSD users who I might have led astray here,
forget I said this. Someone pointed out to me
Hi OpenBSD fans.
I have been googling around and have not been able to solve this
question. ?How can one discover what wireless networks are available
under OpenBSD?
I am used to the iwlist scan eth0 under Linux, and I hate to halt
OpenBSD and boot Linux only to discover the networks, then come
On Thu, February 16, 2006 11:17 am, Ramiro Aceves wrote:
Hi OpenBSD fans.
I have been googling around and have not been able to solve this
question. ?How can one discover what wireless networks are available
under OpenBSD?
I am used to the iwlist scan eth0 under Linux, and I hate to halt
On Thu, Feb 16, 2006 at 05:17:30PM +0100, Ramiro Aceves wrote:
Hi OpenBSD fans.
I have been googling around and have not been able to solve this
question. ?How can one discover what wireless networks are available
under OpenBSD?
I am used to the iwlist scan eth0 under Linux, and I hate to
Theirry, I have had this once on about 15 ami's.
in my case it repeased itself on reboot, and I simply assumed the
card was bad - I pulled it, put another one in, and it worked like a
champ again - send the dead one back to dell with It's busticated
and they sent me a new one.
On Thu, 2006-02-16 at 17:01:03 +0100, Antoine Jacoutot proclaimed...
Under OpenBSD, the Kerberos documentation sometimes refer to the config
file as /etc/krb5.conf or /etc/kerberosV/krb5.conf. Are both locations ok
or is it an error ?
/etc/kerberosV/krb5.conf
/etc/kerberosV/krb5.conf is correct - those other locations
are erroneous. I'll get them fixed. thanks.
-Bob
* Antoine Jacoutot [EMAIL PROTECTED] [2006-02-16 09:11]:
Hi.
Under OpenBSD, the Kerberos documentation sometimes refer to the config file
as
/etc/krb5.conf or
Hi
I started working for a company that its production site is running 2
PIX firewalls with no VRRP (to save cost on licensing, duh). I offered
and they approved to replace them with 2 OpenBSD and CARP. In front of
the FW there is a Cisco 7200 router doing BGP. I offered to remove the
On 2/16/06, yo2lux [EMAIL PROTECTED] wrote:
arp -s 192.168.10.127 00:50:fc:9d:81:e7 permanent
With this command, you're only creating an ARP entry, not a filter of some sort.
[...] but nothing happen, my network connection between gateway
work with all internal IP.
This behaviour isn't
Possible correction?
http://openbsd.org/faq/faq15.html#Intro
Invoking pkg_add(1) with the -u flag and no package name will just
examine all installed packages for updated versions. When a package has
dependencies, they are also examined for updates.
pkg_add -u now also does the upgrade, doesn't
I've just brought 3.8-RELEASE up on an oldie-but-goody machine - ASUS P3B-F
- into which a total of 10 NICs have been thrust. 4 are on an Adaptec
AHA-62044, whose NICs get named sf0 .. sf3 (note that as per the i386 info
at http://www.openbsd.org/i386.html, these are recognised by the GENERIC
Hi
I tried something similar: 2x machines (FreeBSD) with OpenBGPD,
CARP (for fail-over of the internal default gateway), PF and pfsync.
I encountered problems especially with assymetric routed traffic.
E.g. traffic coming in via router 1, going to the client/server and
going out via router 2.
On 2/16/06, yo2lux [EMAIL PROTECTED] wrote:
I have a dhcp server with following configuration:
/etc/dhcpd.conf
shared-network LOCAL-NET {
option domain-name my.domain;
option domain-name-servers 193.231.249.1;
subnet 192.168.10.0 netmask 255.255.255.0 {
Will H. Backman wrote:
Possible correction?
http://openbsd.org/faq/faq15.html#Intro
Invoking pkg_add(1) with the -u flag and no package name will just
examine all installed packages for updated versions. When a package has
dependencies, they are also examined for updates.
pkg_add -u now also
On Wed, Feb 15, 2006 at 03:38:32PM -0700, Peter Valchev wrote:
The Feb 15 X snapshot should have this fixed.
The keyboard issue is fixed, but now mouse buttons don't work.
#dmesg
OpenBSD 3.9-beta (GENERIC) #602: Wed Feb 15 17:33:53 MST 2006
[EMAIL
On 2006/02/16 15:37, eric wrote:
I have a problem on a Dell 2850 machine when trying to use ccd(4) devices.
try having dd scribble /dev/zero over the start of the devices, or
maybe 'g d' in disklabel -E will help somewhere.
Greetings Earthlings...
Ok I ended up putting another 220R in the rack and trying that out. Booted
straight away, and has an earlier version of the firmware/openboot.
I think the problem was a busted/faulty scsi controller or something.. because
booting either disk0 or cdrom never ever came up
On Thu, 2006-02-16 at 22:02:45 +, Stuart Henderson proclaimed...
try having dd scribble /dev/zero over the start of the devices, or
maybe 'g d' in disklabel -E will help somewhere.
Good idea
# dd if=/dev/zero of=/dev/sd0g
# dd if=/dev/zero of=/dev/sd1g
Seems to have worked. Thanks.
Am Mittwoch, 1. Februar 2006 11:33 schrieb Joachim Schipper:
There are quite a few security lists which are likely to have
this information.
What about a grep OpenBSD on these security lists and/or a grep -i
security on the source-changes to filter out info?
I had a very similar problem... the 1 minute hang, prior to returning
results... except that my issue did work on the Internet... with a 60
second hang, before returning results.
This is almost always a DNS problem.
-d
On Thu, 16 Feb 2006, Didier Wiroth wrote:
Hello,
I recently got a fujitsu siemens compactflash (with pcmcia connector)
connect2air gprs card.
I've almost never used ppp and do not know how to setup it the
ppp.conf to use the connect2air gprs card to dial a gprs connection.
I would really
Damien Miller wrote:
I had a very similar problem... the 1 minute hang, prior to returning
results... except that my issue did work on the Internet... with a 60
second hang, before returning results.
This is almost always a DNS problem.
-d
Could this be the issue... I knew I remembered
That sounds exactly like it! Thanks, I'll have a look.
Bryan Brake schreef:
Damien Miller wrote:
I had a very similar problem... the 1 minute hang, prior to returning
results... except that my issue did work on the Internet... with a 60
second hang, before returning results.
This is almost
Stefek Zaba wrote:
I've just brought 3.8-RELEASE up on an oldie-but-goody machine - ASUS
P3B-F - into which a total of 10 NICs have been thrust. 4 are on an
Adaptec AHA-62044, whose NICs get named sf0 .. sf3 (note that as per the
i386 info at http://www.openbsd.org/i386.html, these are
Hi all,
I try to run the Linux IBM Tivoli Storage Manager v5.2.2 on
OpenBSD/i386 3.8-release, with linux emulation. I use a GENERIC
kernel. I got the same result with GENERIC.MP (it's an SMP system). No
hw pb.
The goal is not to use this system in production but to evaluate the
stability of
44 matches
Mail list logo
