It's on it's way.
Jasper
On Wed, 22 Jun 2005 13:58:17 -0700
Jacob Meuser [EMAIL PROTECTED] wrote:
On Wed, Jun 22, 2005 at 03:38:14PM -0500, eric wrote:
On Wed, 2005-06-22 at 15:15:21 -0500, Steve Tornio proclaimed...
Looks like the port needs to be updated. The filename currently
On (22/06/05 13:58), Jacob Meuser wrote:
Looks like the port needs to be updated. The filename currently offered
is
all-20050412.tar.bz2. It doesn't look like mplayer keeps the older
codecs
around.
First I'll ask the MPlayer team to put it back. I've asked them in the past
and
Still get scambled noise with all of these commands. I'm using an IBM
X40.
device dev/audio, sampling 8000
---
# rec -c 1 -r 8000 -f U -s b -d /dev/audio myvoice.raw
Send break (control-c) to end recording
^C
# play -c 1 -r 8000 -f U -s b -d /dev/audio myvoice.raw
Hi all.
And is ALTQ will work on such groups? For example, I had
altq on $ext_if_1 priq bandwidth 10Mb queue { q_pri_1, q_def_1 }
queue q_pri_1 priority 7
queue q_def_1 priority 1 priq(default)
altq on $ext_if_2 priq bandwidth 10Mb queue { q_pri_2, q_def_2 }
On Thu, Jun 23, 2005 at 01:09:07PM +0800, Uwe Dippel wrote:
Yes, I did 'make search' in /usr/ports.
And now I ask about your experiences: which one is recommended,
respectively not so suitable for a smaller server directly connected to
the Internet ?
LogWatch works just fine on openbsd.
--
block out log quick on $ext_if proto tcp from any to any !{
correo.urdi.com.ar, smtp.bourlot.com } port smtp
don't woks . what's I doing wrong.
Syntax. You have 2 destinations in that rule: any and ! {}.
-Jason
Hi,
On 2005-06-23T08:55, Roberto Pereyra wrote:
Hi
I have a simple question about pf.
I want to block outgoing smtp traficc for all my users. I only pass
smtp traffic to two smtp server (correo.urdi.com.ar,
smtp.bourlot.com).
This rule:
block out log quick on $ext_if proto tcp from
Yeah, I do hope that it does continue to not be broken as well, as I
have a Dell PowerEdge that has a PERC2 controller, and at this point
there is no money to replace any hardware in my lab, until we move to
a new facility, which won't happen until June 2006. I really wish that
Adaptec would just
And if the driver breaks on i386 I am sure someone will care. On the
other hand I honestly don't think any developer is using or will be
using Adaptec on amd64. Why would we?
On Jun 22, 2005, at 10:52 PM, Brad Brad wrote:
Well that's the official stance, but i'd hope the developers
On Wed, Jun 22, 2005 at 01:29:26PM +0200, chefren wrote:
Is there someone who has a working dual monitor matrox X11 configuration?
Yep... but i'm always hit by the same bug: only one monitor gets
initialized ( https://bugs.freedesktop.org/show_bug.cgi?id=615 ).
Getting both to work is a
I still haven't resolved the problems on this machine. I had to have
I'm sure that you're frustrated at this point not knowing how to resolve
this issue and having to do it remotely at that :(
If everything else is working at this point and you have pf enabled
as you should, then it's a matter
Hi all,
I'm trying to setup an ha firewall using carp and pfsync.
I tried 3.6 and 3.7 version but both test fails with different kernel panic.
In my last attempt I used the 3.7 version (-stable) on both the firewall
but after some hours the primary box fails with this kernel panic:
panic:
Hello,
I'm a newbie to OpenBSD and I'm looking at designing a redundant
webserver and MySQL server. I think I have the MySQL side covered with
the MySQL functionality.
However, I'm curious to know if anyone has used CARP/PFSYNC as a
primary and secondary Apache server. The Apache server will use
Syntax. You have 2 destinations in that rule: any and ! {}.
Thanks that was wrong.
roberto
2005/6/23, Jason Haag [EMAIL PROTECTED]:
block out log quick on $ext_if proto tcp from any to any !{
correo.urdi.com.ar, smtp.bourlot.com } port smtp
don't woks . what's I doing wrong.
I configured the two firewalls as the basic example described here:
http://www.countersiege.com/doc/pfsync-carp/
I already reported a similar bug
(http://thread.gmane.org/gmane.os.openbsd.misc/83948) but until now I
didn't received any reply.
Before report another bug I would like to know if
On Thu, Jun 23, 2005, Timothy Horie wrote:
I'm trying to rebuild my /etc/mail/aliases file after changing it but it
isn't working.
Check that you reference the right file:
grep AliasFile `sendmail -bt -d0.14 /dev/null | awk '/Conf.*selected/ {print
$3}'`
Then run
sendmail -bi -v
On Thu, Jun 23, 2005 at 08:45:29AM -0700, Timothy Horie wrote:
Hello,
I'm trying to rebuild my /etc/mail/aliases file after changing it but it
isn't working.
does it work if you back out your changes?
Can someone give me some hints? The aliases.db file isn't supposed to be
0 bytes.
On Jun 23, 2005, at 11:21 AM, Mike Koponick wrote:
I'm a newbie to OpenBSD and I'm looking at designing a redundant
webserver and MySQL server. I think I have the MySQL side covered with
the MySQL functionality.
However, I'm curious to know if anyone has used CARP/PFSYNC as a
primary and
--On 23 June 2005 13:12 -0300, Gustavo Rios wrote:
i am completely new to CARP. AFAIK, one is able to build redundant
firewall using CARP. What i wonder is if a build a VPN (with IPSEC) in
the same firewall it will be redundant to, i.e., is it possible to be
redundant ?
You might be
On 6/23/05, Mike Koponick [EMAIL PROTECTED] wrote:
Hello,
I'm a newbie to OpenBSD and I'm looking at designing a redundant
webserver and MySQL server. I think I have the MySQL side covered with
the MySQL functionality.
However, I'm curious to know if anyone has used CARP/PFSYNC as a
snip
The only tricky part is after configuring the first disk, it will
default to done. No, just specify the second, then the third.
Thanks, I will reinstall later this week, and look for the done prompt.
snip
All that being said...
1) WHY do you feel the need to allocate all your
Hi,
I've googled for that to the point of madness and finally have broken down.
I've got a Netra X1 running OpenBSD 3.6 and would like to SSH into it
and then serial to another box. I've got the serial cable set up and
know that most problems such as this arise from a faulty cable, but
I'd like
I was reading an article on kerneltrap.org about the new rthreads being
in the kernel. Is this in current yet or is it still not ready.
Because I know nothing about this and I'm just trying to learn, is this
implemented in all architectures similarly? Just curious. Thanks,
Brandon
Making, drinking tea and reading an opus magnum from byte_jump:
[Charset ISO-8859-1 unsupported, filtering to ASCII...]
Hi,
I've googled for that to the point of madness and finally have broken down.
I've got a Netra X1 running OpenBSD 3.6 and would like to SSH into it
and then serial to
Hi Mike,
However, I'm curious to know if anyone has used CARP/PFSYNC as a
primary and secondary Apache server. The Apache server will use a
virtual name, so an IP address probably won't be a problem. There is a
firewall already in front of the OpenBSD box.
This is what I do:
I tried using /dev/tty01 and got:
$ tip test
can't open log file /var/log/aculog.
connected
This seems to have worked, but I couldn't get any sort of response and
had to terminate the session. Perhaps I need to check my cable now.
:-)
Thanks.
On 6/23/05, Michael Shalayeff [EMAIL PROTECTED]
Hi all,
I have a problem with the RS480M2-IL mainboard from MSI.
The problem is that I cannot write with more than 29 MB/s to a disk on any
add-on PCI IDE/RAID controller, even not to a raid 0 array.
I even get only 14 MB/s to a raid 1 array.
I tried to attach a 3ware Escalade 7006-2 with 2
Hello,
how can one set the time offset of the bios clock different from
UTC?
-Hanspeter
Google won't help you. Use dmesg and the manpages.
OK, first dmesg to find the real serial io ports.
If necessary man every device listed in dmesg.
I think you'll find that you have a zs or a sab device.
man sab
Look in the FILES and SEE ALSO sections of the manpage.
The message you get
Click here, www.hoax-buster.org for more information. This is a
paid advertisement. any views are not in any way our opinion as the
advertiser of this ad. If you wish to be taken off this list please reply
On 6/24/05, Hanspeter Roth [EMAIL PROTECTED] wrote:
how can one set the time offset of the bios clock different from UTC?
You obviously haven't searched the archives Please do so before
posting; it'll save you from getting flamed. Your question is rather
old (so you'll get an old RTFA, dating
These are not in AMD64 GENERIC, but I gave it a go.
It worked well. In hostap clients just worked (at 54M), in client (BSS)
mode it's just as good as on i386. Are there issues with ural on AMD64?
OpenBSD 3.7-current (GENERIC+URAL) #0: Thu Jun 23 12:14:17 BST 2005
[EMAIL
chefren wrote:
Is there someone who has a working dual monitor matrox X11 configuration?
I put the xorg.conf and dmesg at
http://shockley.net/OpenBSD/dmesg/leviathan.tar.gz. I've got a G450,
not using the Matrox HAL thing.
Winston Williams wrote:
This is a continuation of my 'sshd suddenly not responding' message from
Tuesday.
So you start a new thread. *sigh*
And you continue to waste our time by not providing real information.
Hint: if we all aren't saying, Me, too!, you have an unusual problem,
and you have
byte_jump wrote:
I tried using /dev/tty01 and got:
$ tip test
can't open log file /var/log/aculog.
connected
This seems to have worked, but I couldn't get any sort of response and
had to terminate the session. Perhaps I need to check my cable now.
:-)
yes. That's what happens when you
Winston Williams wrote:
This is a continuation of my 'sshd suddenly not responding' message from
Tuesday.
I still haven't resolved the problems on this machine. I had to have
someone at the data center reboot the machine so that I could get back
in over ssh. After they rebooted the machine,
Hi,
I've installed OpenBSD 3.7 on iBook 300 from official CD.
But in booting and Xorg, I get below messages.
method backlight-off not found; ihandle=ffbc9600 phandle=ff93b470
method backlight-on not found; ihandle=ffbc9600 phandle=ff93b470
method set-contrast not found; ihandle=ffbc9600
37 matches
Mail list logo