From: Nick Holland
To: misc@openbsd.org
Date: Mon, 20 Nov 2023 07:47:40 -0500
Subject: Re: a couple question about my fde setup
On 11/19/23 18:09, Shadrock Uhuru wrote:
hi all
a couple question about my fde
first, i have fde setup using a keydisk on my laptop, encryption and
decryption
this ?
shadrock
e to test a change on one machine before breaking
everything...and then waiting for the next refresh cycle to fix it.
Nick.
hi nick sorry for the delay in replying
thanks for the idea,
yes it does sound better than zone transfer.
i will have a go implimenting this when i have some spare time.
again many thanks
shadrock
From: Paul de Weerd
To: openbsd
Date: Sat, 5 Aug 2023 19:31:06 +0200
Subject: Re: nsd listening on localhost is zone transfer possible transfer ?
On Fri, Aug 04, 2023 at 06:23:48PM +0100, Shadrock Uhuru wrote:
| hi everyone
| i have unbound setup on port 53
| and nsd listening on localhost
on the primary
error: xfrd: zone 1.10.10.in-addr.arpa: max notify send count reached,
10.10.1.5 unreachable
error: xfrd: zone forwardzone: max notify send count reached, 10.10.1.5
unreachable
shadrock
on $wan inet6 proto udp to port 546 no state
the ipv6 addresses were assigned,
many thanks for bearing with me,
much appreiciated.
shadrock
id min-ttl 64 max-mss 1440)
the following page states that PMTU works exactly using DF
should i be using no-df in the scrub rule ?
https://serverfault.com/questions/412083/openbsd-pf-match-in-all-scrub-no-df-causes-https-to-be-unreachable-on-mobile
shadrock
ff00 broadcast 10.200.100.255
any suggestions why i am not getting a global ipv6 on em0 ?
shadrock
Hi
many thanks Otto and Stuart
forgot to move my default block rule
back to the top after adding some ipv6 stuff at the beginning.
have a happy and successful new year.
shadrock
with.
the following is a snippet showing the rules
thanks shadrock
Dec 27 03:00:40.557716 rule 7/(match) block in on em0: 192.168.1.1 > 224.0.0.1:
igmp query [tos 0xc0] [ttl 1]
Dec 27 03:00:59.495834 rule 35/(match) block in on pppoe0: 167.248.133.160.60037
> 88.97.5.79.12473: S 904362479:904362479(
the pppoe0 interface to rad.conf also ?
shadrock
cat /etc/hostname.bge0
inet 88.97.5.79 255.255.255.255 NONE mtu 1508
inet6 autoconf
up
ifconfig bge0
bge0: flags=248843 mtu 1500
lladdr 00:18:8b:6a:ab:48
index 1 priority 0 llprio 3
media: Ethernet autoselect
for a disaster recovery like what i experienced above.
i will be using ville walveranta's autodump 1.5a script
which does a full dump on sundays and incremental dumps during the week,
i already have /home /etc and /root set for backup,
are there any other partitions i should bear in mind ?
shadrock
appears if i try to open a pdf or ps file,
i managed to open one out of about ten ps files i tried,
is this a known problem or something i'm not doing right ?
shadrock
: /home/shadrock/.config/qutebrowser/userscripts/qute-pass
Info
Command
/home/shadrock/.config/qutebrowser/userscripts/qute-pass
Status Userscript exited with status 1.
Standard output
No output.
Standard error
Traceback (most recent call last):
File "/home/shadrock/.config/qutebr
From: Marcus MERIGHI
To: openbsd
Date: Sat, 1 Jan 2022 08:42:27 +0100
Subject: Re: raspberry pi 3b+ how to boot with hdmi
Good morning 2022,
niyal...@gmail.com (Shadrock Uhuru), 2021.01.01 (Sat) 05:54 (CET):
> From: Stuart Henderson
> To: misc@openbsd.org
> Date: Tue, 28 Dec 2
From: Stuart Henderson
To: misc@openbsd.org
Date: Tue, 28 Dec 2021 12:55:27 - (UTC)
Subject: Re: raspberry pi 3b+ how to boot with hdmi
> On 2021-12-28, Shadrock Uhuru wrote:
> hi everyone
> i have successfully installed the latest snapshot onto a rpi3b+
> using a
From: Stuart Henderson
To: misc@openbsd.org
Date: Tue, 28 Dec 2021 12:55:27 - (UTC)
Subject: Re: raspberry pi 3b+ how to boot with hdmi
On 2021-12-28, Shadrock Uhuru wrote:
hi everyone
i have successfully installed the latest snapshot onto a rpi3b+
using a serial cable,
after rebooting
i change to make the hdmi monitor the primary
display when booting ?
thanks shadrock
hi everyone
i've installed openbsd 7.0 onto a usb stick connected to my raspberry pi 3
with a serial cable,
installation completes without a problem,
after the congratulation promt i remove the power supply remove the usb
stick
and mount the i partition of the usb stick on my laptop,
and add
worked perfectly
many thanks
shadrock
On Sat, 24 Jul 2021 at 21:42, shadrock uhuru wrote:
> thanks for the quick reply Andreas
> will try it later tonight when i'm back at the laptop.
> shadrock
>
> On Sat, 24 Jul 2021 at 20:36, Andreas Kusalananda Kähäri <
> andreas
thanks for the quick reply Andreas
will try it later tonight when i'm back at the laptop.
shadrock
On Sat, 24 Jul 2021 at 20:36, Andreas Kusalananda Kähäri <
andreas.kah...@abc.se> wrote:
> On Sat, Jul 24, 2021 at 07:11:30PM +0100, shadrock uhuru wrote:
> > Hi all
> >
+ < 20 && $(route -n show | grep -c '^default ') == 0));
do
sleep .5
done
fi
---
any help would be appreciated.
shadrock
GPG_TTY=/dev/ttype3 .
where should i be putting the export command so that there is a tty
ready when the terminal is opened.
shadrock
ons ?
shadrock
as my browser but i would like firefox up
and running again asap
any help would be welcomed
shadrock
From: Stuart Henderson
To: misc@openbsd.org
Subject: Re: what should i do with these package warnings
Date: Tue, 7 Jul 2020 08:36:51 - (UTC)
On 2020-07-07, Shadrock Uhuru wrote:
hi everyone
Q2
should i remove these missing dependencies ?
also the issue of "lib should exist
uble-entry accounting principles to ensure balanced
books.
Maintainer: Antoine Jacoutot
WWW: https://www.gnucash.org/
doas pkg_add gnucash
quirks-3.367 signed on 2020-06-23T19:37:37Z
Can't find gnucash
-
thanks shadrock
smime.p7s
Description: S/MIME cryptographic signature
On 26.02.2020 10:57, Andreas Kusalananda Kähäri wrote:
On Wed, Feb 26, 2020 at 09:37:53AM +, Shadrock Uhuru wrote:
> > ---
> >
> > shadrock
Hi
yes i have gpg2 installed
gpg-agent.conf has cat .gn
~.profile :
export GPG_TTY=$(tty)
Shadrock Uhuru wrote:
[-- text/plain, encoding 8bit, charset: utf-8, 61 lines --]
Hi
From: Rubén Llorente
To: misc@openbsd.org
Subject: Re: pass 'password manager' problem
Date: Fri, 21 Feb 2020 16:22:37 - (UTC)
Do you have a ~.gnupg/gpg.conf ? Pass works fine
Hi
From: Rubén Llorente
To: misc@openbsd.org
Subject: Re: pass 'password manager' problem
Date: Fri, 21 Feb 2020 16:22:37 - (UTC)
Do you have a ~.gnupg/gpg.conf ? Pass works fine for me.
Shadrock Uhuru wrote:
[-- text/plain, encoding 7bit, charset: utf-8, 6 lines --]
running 'pass
running 'pass username' returns
"gpg: Sorry, we are in batchmode - can't get input",
am i missing a piece of software or setting ?
shadrock
smime.p7s
Description: S/MIME cryptographic signature
On 13.02.2020 08:43, Robert Paschedag wrote:
sent from my mobile device
Am 12. Februar 2020 15:07:46 schrieb Shadrock Uhuru :
hi everyone
i have setup iked on my firewall and laptop as a roadwarrior setup
following https://www.openbsd.org/faq/faq17.html
i.ve tested from within the local
method
http://paste.openstack.org/show/789464/
imhoptep iked logs (responder)
http://paste.openstack.org/show/789465/
pegasus iked logs (initiator)
http://paste.openstack.org/show/789466/
thanks shadrock
smime.p7s
Description: S/MIME cryptographic signature
hardware
passthrough to access the data.
Am 16.01.20 um 13:10 schrieb Shadrock Uhuru:
i have just configured my 4 disk raid 10 array with mdadm,
the filesystem is ext4 unencrypted
and arch is installed on a separate disk,
do i need to reconfigure mkinitcpio.conf for my md array so that the
array
on the raid array
including the example in tne wiki https://wiki.archlinux.org/index.php/RAID
i have not reboot the new array yet
so i would like to make sure everything necessary is configure before i do that.
shadrock
smime.p7s
Description: S/MIME cryptographic signature
On 15.01.2020 02:05, Shadrock Uhuru wrote:
On 11.01.2020 14:00, Chris Billington wrote:
Pacman static will likely help, but you'll need to actually install it and
use it, i.e.:
sudo pacman -S pacman-static
sudo pacman-static -Syu
On Sat, Jan 11, 2020 at 1:57 PM Shadrock Uhuru via arch-general
On 10/9/19 2:56 PM, Paul de Weerd wrote:
On Wed, Oct 09, 2019 at 01:40:42PM +, shadrock uhuru wrote:
| after trying sysupgrade for the first time on my laptop running snapshots
| running the following command returns no such dir.
|
| doas pkg_add -u
| https://ftp.OpenBSD.org/pub/OpenBSD/6.6
/: no such dir
my /etc/installurl has
cat /etc/installurl
https://ftp.OpenBSD.org/pub/OpenBSD
does this need editing
if so what url should i use ?
shadrock
3]: forked to background, child pid 6456
thanks shadrock
> To:
> misc@openbsd.org
>
>
> On 9/15/19 7:31 AM, shadrock uhuru wrote:
>> hi everyone
>> i can login with authpf but unable to exit or control D out of the ssh
>> session
>> the only way out is to control C which also kills any other ordinary ssh
>> u
hi everyone
i can login with authpf but unable to exit or control D out of the ssh
session
the only way out is to control C which also kills any other ordinary ssh
user connected to the server
my authpf user has authpf as its login shell and login class,
is this normal behaviour ?
shadrock
?
shadrock
les should be replaced by a strict Unicast Reverse Path
Forwarding (uRPF) check:
block in log quick from urpf-failed
i have both antispoof and urpf-failed, should i leave both in my pf.conf
or remove antispoof ?
shadrock
dhcrelay -i iwn0
i haven't seen any examples like this on the net
shadrock
hi everyone
how do i check if rad is working correctly
i have a PD Prefix address on my routers wan interface
but not on its lan interface or anywhere on the lan
rad is configured with the following
cat /etc/rad.conf
interface em0
interface em1
interface tun0
i also have dhcpcd configured
cat <<
> To:
> shadrock uhuru
> CC:
> misc@openbsd.org
>
>
> shadrock uhuru(niyal...@gmail.com) on 2019.08.23 18:46:32 +0100:
>> hi eveyone
>> if i have a dhcp server in subnet A connected to interface em0 (lan) and
>> subnet B connected to interface iwn0 (wirele
hi eveyone
if i have a dhcp server in subnet A connected to interface em0 (lan) and
subnet B connected to interface iwn0 (wireless zone) on the router
with dhcrelay -i em0 running on the router should the wireless subnet be
able to get its dhcp address from the dhcp server on the lan ?
> hiya
> can you have lines like this in pf.conf
> anchor "authpf/vpn/*" in on $VPN_IFACE
> anchor "authpf/wireless/*" in on $WIRE_IFACE
> and have anchors in /etc/authpf/vpn with your vpn rules
> and anchors in /etc/authpf/wireless with your wireless rules
hiya
can you have lines like this in pf.conf
anchor "authpf/vpn/*" in on $VPN_IFACE
anchor "authpf/wireless/*" in on $WIRE_IFACE
and have anchors in /etc/authpf/vpn with your vpn rules
and anchors in /etc/authpf/wireless with your wireless rules ?
shadrock
> Hi,
>
> shadrock uhuru wrote on Sat, Aug 17, 2019 at 01:01:08PM +0100:
>
>> is there a package for pcap or libpcap
>> or do i have to download the source and compile
> to answer such questions, use pkg_locate(1).
>
># pkg_add pkglocatedb
>$ man pkg
On 8/17/19 1:07 PM, Noth wrote:
> On 17/08/2019 14:01, shadrock uhuru wrote:
>> hi everyone
>> is there a package for pcap or libpcap
>> or do i have to download the source and compile
>> shadrock
>>
> libpcap is in base, see man pcap. It lives in /usr/lib.
thanks
hi everyone
is there a package for pcap or libpcap
or do i have to download the source and compile
shadrock
tp
#
if i use !$EXT_IFACE in th pass line will the proxy work for
INT_IFACE,WIRE_IFACE and VPN_IFACE ?
could i merge the two divert lines if i remove inet and inet6 and
replaced LO_ADDR_INET4 and LO_ADDR_INET6 with LO_IFACE ?
shadrock
on
a link use the same MTU value i.e. 1508 ?
could you send examples of the following files to compare with mine for
any misconfigurations on my side please.
wan hostname file
lan hostname file
pppoe hostname file
rad.conf
dhcpcd.conf
thanks
shadrock
nodes on
a link use the same MTU value i.e. 1508 ?
could you send examples of the following files to compare with mine for
any misconfigurations on my side please.
wan hostname file
lan hostname file
pppoe hostname file
rad.conf
dhcpcd.conf
thanks
shadrock
adcast address do i use for in the carp_wan configuration if the
> mask is 255.255.255.255
> question 4
> do i just add interface em0 to rad.conf
> or do i use the complex case to set the prefix and basic DNS options.
> interface em1 {
> prefix ::::/48
> dns {
> nameserver ::::53
> search example.org
> question 5
> do i need to put -autoconfprivacy -soii in the nics or should i remove it.
>
> shadrock
is there no one who can help me with this ?
shadrock
org
qeustion5
do i need to put -autoconfprivacy -soii in the nics or should i remove it.
shadrock
Forwarded Message
Subject:Re: howto verify keydisk backup
Date: Wed, 19 Jun 2019 09:23:53 +0100
From: shadrock uhuru
To: noah pugsley
On 6/19/19 5:25 AM, noah pugsley wrote:
> On Tue, Jun 18, 2019 at 5:37 PM shadrock uhuru wrote:
>> hi every
with diff using
doas diff /dev/rsd1a backup-keydisk.img
Binary files /dev/rsd1a and backup-keydisk.img differ
---
is there a problem with the hardware combination of usb sticks i use for
keydisk backup
or the commands i use especially the diff command to try and verify the image
file ?
shadrock
and limiting their access to my network.
i will be adding another network port to both firewalls ,
i assume i will need to have two wireless routers,
one plugged into each firewall,
are the two wireless routers setup to have
the same ssid and password for smooth fail-over ?
shadrock
On 5/13/19 12:51 PM, Edgar Pettijohn wrote:
> On May 13, 2019 2:58 AM, shadrock uhuru wrote:
>>
>>
>> On 5/13/19 1:35 AM, shadrock uhuru wrote:
>>> hi everyone
>>> since upgrading to 6.5 my i3bar no longer works.
>>> i have not changed the conf
On 5/13/19 1:35 AM, shadrock uhuru wrote:
> hi everyone
> since upgrading to 6.5 my i3bar no longer works.
> i have not changed the configuration in any way
> when i run the i3status command manually in a terminal the bar is not
> displayed but the correct infomation that would
hi everyone
since upgrading to 6.5 my i3bar no longer works.
i have not changed the configuration in any way
when i run the i3status command manually in a terminal the correct
information that would be on the i3bar is echoed to the terminal.
the message on the right hand of the i3bar is
error:
On 5/9/19 11:56 AM, cho...@jtan.com wrote:
> shadrock uhuru writes:
>> i've got a couple of follow up queries concerning post upgrade things todo.
>>
>> --- -dbus-1.12.10p0v0 ---
>> Remember to update /etc/machine-id
>> how do i update machin
On 5/7/19 9:16 PM, Omar Polo wrote:
> On Tue, May 07, 2019 at 02:04:03AM +0100, shadrock uhuru wrote:
>>
>> On 5/6/19 8:18 PM, Omar Polo wrote:
>>> On Mon, May 06, 2019 at 07:46:53PM +0100, shadrock uhuru wrote:
>>>> hi everyone
>>>> when upgra
to unlock the 6.5 filesystem on subsequent reboots.
thanks
shadrock
hi everyone
i have added the following packages
sdl
sdl-mixer
sdl_image
sdl_net
sdl_ttf
sdl2
sdl2-mixer
sdl2_image
sdl2_net
sdl2_ttf
the lib and header files are missing
are there additional packages to add for these.
shadrock
hi everyone
just a quick question about pycharm updates
do i allow pycharm to update its's IDE and Plugins or
only update it with pkg_add -u ?
shadrock
b:54/fc/fc
xterm*color15: rgb:fc/fc/fc
! right hand side scrollbar...
xterm*rightScrollBar: true
xterm*ScrollBar: true
! stop output to terminal from jumping down to bottom of scroll again
xterm*scrollTtyOutput: false
---
thanks shadrock
g:/cvs -q up -Pd -A
>>
> rm -rf /usr/ports
> And checkout a release ports tree.
>
> See the FAQ for instructions.
>
>> shadrock
>>
carried out instructions as above
and successfully installed pygame
i didn't notice i had use the wrong cvs update command
many thanks
shadrock
On 12/27/18 3:48 AM, Anthony J. Bentley wrote:
> shadrock uhuru writes:
>> hi everyone
>>
>> i have openbsd 6.4 release installed
>>
>> when i try to make install ports/devel/pygame i get an error stating
>>
>> create /usr/ports/packages/am
this ?
shadrock
hi everyone
on powering up the laptop after closing the lid
the keydisk is not found
i shutdown the laptop and with the power button
then restart it again
this time the keydisk is found.
is this behaviour normal for resuming from hibernation with an encrypted
filesytem ?
shadrock
On 11/26/18 9:26 AM, Peter Hessler wrote:
> On 2018 Nov 26 (Mon) at 01:18:59 + (+), shadrock uhuru wrote:
> :
> :also how do i resume from hibernate or suspend with the screen locked
> :
> :i use i3 and lock the screen with xautolock and i3lock in .i3/config
> :
>
also how do i resume from hibernate or suspend with the screen locked
i use i3 and lock the screen with xautolock and i3lock in .i3/config
i put i3lock in /etc/apm/resume
when i resume from ZZZ no lock screen appears, i am brought straight
to my desktop
shadrock
Hi everyone
i have in my /etc/rc.conf.local
apmd "-A -Z8 -t120"
my laptop doesn't hibernate when the power falls below 8%
is there more that i need to configure ?
shadrock
connection is in the backup state.
is this normal or should both carps be in backup for the slave ?
shadrock
master firewall
/etc/hostname.carp1
inet 10.5.5.1 255.255.255.0 10.5.5.255 vhid 1 carpdev em1 pass pass1
/etc/hostname.carp2
inet 192.168.5.1 255.255.255.0
as the master firewall
while the slave carp lan connection is in the backup state.
is this normal or should both carps be in backup for the slave ?
shadrock
master firewall
/etc/hostname.carp1
inet 10.5.5.1 255.255.255.0 10.5.5.255 vhid 1 carpdev em1 pass pass1
/etc/hostname.carp2
inet
connection is in the backup state.
is this normal or should both carps be in backup for the slave ?
shadrock
master firewall
/etc/hostname.carp1
inet 10.5.5.1 255.255.255.0 10.5.5.255 vhid 1 carpdev em1 pass pass1
/etc/hostname.carp2
inet 192.168.5.1 255.255.255.0 192.168.5.255 vhid 2 carpdev em0 pass
ddns update script to signal a restart of
isakmpd when the dynamic ip changes, will implement isakmpd else will
follow your suggestion and use openvpn for my net to net link, i had
already planned to use openvpn for my roadwarriors.
shadrock
The problem is that when the address of one side
roadwarriors.
shadrock
my apologies for my first post
network topology
home network remote network
3.3.3.3 1.1.1.12.2.2.2 4.4.4.4
-- router_a internet router_b -
|
my apologies for my first post
network topology
home network remote network
3.3.3.3 1.1.1.1 2.2.2.2 4.4.4.4
-- router_a internet router_b -
|
I have a lan interface
A tun0 interface
Both are bridged with bridge0
Bridge0 is configured by brconfig
I have setup openvpn in bridge mode
But only broadcasts and arp request pass tun0
How do I add an address/ip to bridge0 ?
shadrock
-
Email sent
ftp://ftp.openbsd.org/pub/OpenBSD/3.7/packages/i386/LPRng-3.8.21p0.tgz
/usr/sbin/pkg_add:
ftp://ftp.openbsd.org/pub/OpenBSD/3.7/packages/i386/LPRng-3.8.21p0.tgz:Fatal
error
has anyone come across this problem and whats the solution
Shadrock
-
Email sent
85 matches
Mail list logo
