, please
wait...\n;
echo | mail -s alert byronklipp...@ml1.net sleep
9;
fi
sleep 9;
done
Byron Klippert
byronklipp...@ml1.net
(867) 332-4184
than casually?
Is this a joke?
Byron Klippert
byronklipp...@ml1.net
(867) 332-4184
panic message:
uvm_fault(0xd0a2c8c0, 0x1000, 0, 1) - e
kernel: page fault trap, code=0
Stopped at usb_allocmem+0x14f: cmpl%ebx,0(%eax)
On Tuesday, November 29, 2011 7:14 PM, Byron Klippert
byronklipp...@ml1.net wrote:
I managed to capture trace and ps output from ddb
won't get access to certain
speeds).
Byron Klippert
byronklipp...@ml1.net
(867) 332-4184
.
These are *invaluable* when testing kernel configurations.
Byron Klippert
byronklipp...@ml1.net
(867) 332-4184
Byron Klippert
byronklipp...@ml1.net
(867) 332-4184
I use the Delta 1010LT for multichannel playback and (limited) recording
without issue. I use it with a set of M-Audio BX8a monitors and SBX10
woofer. A very nice setup on a very nice platform.
- Byron
On Thu, Mar 15, 2012, at 02:20 PM, Alexandre Ratchov wrote:
On Thu, Mar 15, 2012 at
Byron Klippert
byronklipp...@ml1.net
http://byronklippert.ca
Tel 867-332-4184
. The behavior is really simple, but maybe need a good install
script.
On Tue, Aug 21, 2012 at 10:10 AM, Stuart Henderson
s...@spacehopper.orgwrote:
On 2012-08-21, David Diggles da...@elven.com.au wrote:
On Mon, Aug 20, 2012 at 12:42:16PM -0700, Byron Klippert wrote:
The web interfaces
OpenBSD on
the ThinkPad X230, and any lack of support, before I place my order.
Thanks.
-Amarendra
--
Byron Klippert
byronklipp...@ml1.net
c. 867-336-1306
: [ Packets: 107323 Bytes: 116053001
]
I assume this can be worked from pf ioctl's (man 4 pf) but for someone
lacking C programming skills this would be a nice out-of-the box
feature. Or is this request out-of-scope for pfctl's design?
--
Byron Klippert
: Capability 0x01: Power Management
Thanks,
--
Byron Klippert
byronklipp...@ml1.net
c. 867-336-1306
#include agp.h
+#define DRMDEBUG
+
#define DRM_DEBUGBITS_DEBUG 0x1
#define DRM_DEBUGBITS_KMS 0x2
#define DRM_DEBUGBITS_FAILED_IOCTL 0x4
Sorry no free time to compile new kernel... will try later.
--
Byron Klippert
byronklipp...@ml1.net
c. 867-336
Sorry for the noise. Should have read the FAQ first...
http://www.openbsd.org/faq/current.html#20130812 explains the required
firmware.
It's working now.
On Sat, Aug 17, 2013, at 10:48, Byron Klippert wrote:
On Sat, Aug 17, 2013, at 2:07, Jonathan Gray wrote:
Did you install the firmware
: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (fce8772d0edba2b9.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
--
Byron Klippert
byronklipp...@ml1.net
c. 867-336-1306
Same problem exits on Nov 7 snapshot.
On Sat, Nov 9, 2013, at 23:57, Byron Klippert wrote:
Hello,
Fresh install of 5.4, pkg_add avr, avrdragon programmer plugged in via
usb, invoked `sudo avrdude -c dragon_isp -p attiny4313 -P usb` causes
the machine to panic.
Tried different avrdragon
interfering with the existing
domain system?
The LAN I'm running the OpenBSD server on is a different subnet and
accessed over WiFi. The Windows7 clients access the domain over
Ethernet.
Thanks,
--
Byron Klippert
byronklipp...@ml1.net
c. 867-336-1306
On Sun, Dec 15, 2013, at 5:01, Marcus MERIGHI wrote:
Hello Byron,
the answer to all your questions of course is THE CLOUD :)
I prefer to solve problems on THE GROUND :)
Am 12/15/13 07:56, schrieb Byron Klippert:
I'm looking at options for sharing machine resources
(drives/directories
on rd0a swap on rd0b dump on rd0b
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/amd64 5.4 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
--
Byron Klippert
byronklipp...@ml1.net
c. 867-336-1306
Dec 2013, at 22:19, Byron Klippert byronklipp...@ml1.net wrote:
http://pcengines.ch/apu.htm
Introduction: Thank you for taking the time to test our first round
prototypes of the new apu system board. Since this is a prototype, there
are a few bugs... Use at your own risk, don't use
2
fdc0: drive 0: unknown device type 0xf0
fd0 at fdc0 drive 0: density unknown
fdc0: drive 1: unknown device type 0xf0
fd1 at fdc0 drive 1: density unknown
softraid0 at root
scsibus0 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
On Mon, Dec 16, 2013, at 13:19, Byron Klippert
?
--
Byron Klippert
byronklipp...@ml1.net
c. 867-336-1306
)
mtrr: K6-family MTRR support (2 registers)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x33
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
...snip
Any help is appreciated.
Regards,
--
Byron Klippert
byronklipp...@ml1.net
c. 867-336-1306
That's it, thanks Tim.
For the record I've got `permit nopass www as root cmd /sbin/pfctl' in
doas.conf and the script calls `printf "`doas /sbin/pfctl -sr`"'.
Seems to work.
On Fri, Mar 25, 2016, at 12:31, Tim van der Molen wrote:
> Byron Klippert (2016-03-25 18:37 +0100):
&
ot on wd0a (157fa0187fd41f4c.a) swap on wd0b dump on wd0b
fdisk output:
Disk: wd0 geometry: 14593/255/63 [234441648 Sectors]
Offset: 0 Signature: 0xAA55
Starting Ending LBA
Info:
#: id C H S - C H S [
start: size ]
--
r will
auto-poll and the value will be made available through sysctl(8)?
Perhaps I'm missing a step before going to securemode?
Any advice?
Thanks in advance,
--
Byron Klippert
byronklipp...@ml1.net
c. 867-336-1306
On Fri, Dec 9, 2022, at 12:57, Stuart Henderson wrote:
> On 2022-12-09, Byron Klippert wrote:
>> Hello,
>>
>> I get an snmp protocol error response when attempting to `snmp get` certain
>> OIDs on various devices. However `tcpdump` shows that the device
Thanks for the detailed review Martijn,
I'll follow up with the vendors and see if they can address the issue with a
firmware update.
On Sat, Dec 10, 2022, at 01:42, Martijn van Duren wrote:
> On Fri, 2022-12-09 at 13:35 -0700, Byron Klippert wrote:
>> On Fri, Dec 9, 2022, at 12:5
om bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe (60 entries)
bios0: vendor Apple Inc. version "99.0.0.0.0" date 06/13/2019
--
Byron Klippert
byronklipp...@ml1.net
c. 867-334-5179
29 matches
Mail list logo