Hello Jessy,
it would be great if you could verify the behavior on the main branch
(at least on the last stable 1.20.6), and give us some logs, so we can
have a better idea of the issue and how proceed, whether in a general
manner, or with some specific fixes.
Giacinto
On Mon, May 1, 2023 at
Hi Aleksander, all,
On Wed, Aug 4, 2021 at 9:56 AM Aleksander Morgado
wrote:
>
> Hey Tomasz,
>
> >
> > Thank you. The patch works. The correct vendor and device id are presented.
> > The plugin manager still prints that it found 3 plugins to try, but now the
> > first to try and best plugin is
Hi Aleksander,
the classic:
AT+CFUN=1,1
the question, however, would be why do you want to reboot the modem?
It looks like you want to update the FW, but Thales offers its own
method, and so not what is delivered by the chipset manufacturer.
Cheers,
Giacinto
On Tue, Jul 6, 2021 at 6:39
Hi Aleksander,
100ms between characters seems excessive.
In general there are the RTS/CTS on the serial line and on the virtual
serial over usb (supported by option and acm drivers) for this.
A stripped down RS232 with only TX/RX/GND could need some delay, but
it is very difficult to guess how
Hi Aleksander,
the business of secondary bearers is a bit murky, and so far it is
limited to VoLTE in practical usage, for which use the modems create
it automatically on top of the IMS bearer when an ATD; command is
entered (or equivalent on MBIM/QMI).
BR,
Giacinto
On Mon, Apr 26, 2021 at
Hello Jack,
what is your modem? Does it support secondary PDNs?
And - mainly - does your subscription support the QOS that you have requested?
Maybe you can switch to a more talkative error report, like AT+CMEE=2
Regards,
Giacinto
On Mon, Apr 26, 2021 at 5:43 PM Jack Broderick
wrote:
>
>
Hi Norbert, Aleksander,
On Wed, Mar 10, 2021 at 12:38 AM Norbert van Bolhuis
wrote:
>
> Hi,
>
> We're using a Cinterion ELS61-E R2 modem and ModemManager-1.14.0.
> It looks like we're facing a PDN activation problem which maybe caused
> by ModemManager.
>
> Our modem is happily connected, using
Hi Federico,
On Sat, Feb 27, 2021 at 6:16 PM Federico Murciano
wrote:
>
>
> Hardware:
> Quectel
> RG500QEA_VH
> firmware revision: RG500QEAAAR11A03M4G
according to the brochure it might support VoLTE.
I think the normal profile for t-mobile uses CID #2 for the combined
attach (and
Hi Federico,
On Fri, Feb 26, 2021 at 4:52 PM Federico Murciano
wrote:
>
> Hello everyone,
>
>
> since a while I have been experimenting this problem when I try to connect my
> modem to the APN. It was working for a long time till a upgraded the firmware
> and after that it always appear so I
Hi Norbert,
> >>> We're using a Cinterion ELS61-E R2 and seem to suffer from a lot of
> >>> "packet data disconnects" and cell/rat/MO switching.
> >
> > Are you using the bare modem or on some datacard?
> > Is the power supply good?
> > And the antenna?
> > Please ask your contact in Thales (or a
Hi Norbert,
>
> I don't think a COPS=0 command overrules any previously COPS-selected
> RAT (if I read the AT command manual correctly).
>
It does, it is the only way to go back to "all technologies" mode.
Giacinto
___
ModemManager-devel mailing list
Hi Norbert, Aleksander,
>
> Giacinto, added you in CC, in case you have some suggestion.
don't worry, I am following MM, libMbim, libQmi.
>
> >
> > We're using a Cinterion ELS61-E R2 and seem to suffer from a lot of
> > "packet data disconnects" and cell/rat/MO switching.
Are you using the
Hi Aleksander,
On Tue, Jan 19, 2021 at 11:06 AM Aleksander Morgado
wrote:
>
> Hey Giacinto,
>
> >
> > for Cinterion modems that support the profiles, there is a special
> > command to read them (ATI61, no mbim equivalent, maybe qmi but I
> > wouldn't know it; and an at^scfg? option to read the
Hello Jessy,
On Sat, Sep 5, 2020 at 10:11 AM Jessy Exum
wrote:
> Hello everyone, I hope this finds you well.
>
> I have been working on getting a product certified with Verizon, but
> failed because my first implementation did not handle their OTA-DM (Over
> the Air Device Management)
Hi Matthew,
On Sat, Sep 5, 2020 at 10:27 AM Aleksander Morgado
wrote:
> Hey Matthew,
>
> > u-blox released the following guidance in June 2020 on the TOBY-L2,
> TOBY-R2, and LARA-R2 to setup your APN you want to connect to as the
> initial bearer at CID=1.
> >
> >
>
Dear all,
I have a problem with some modems that don't support USB <2.00 for the
network interface.
In this case, PPP must be used.
It is a modem-specific limitation, and maybe it should have a udev flag:
MM_USE_PPP_OVER_USB1, or something more creative.
The question is how to recognize the
Hi Aleksander,
On Thu, Jul 23, 2020 at 8:28 AM Aleksander Morgado
wrote:
>
> Hey
>
> > > > I need to set up the default LTE bearer settings: APN, type of APN,
> > > > authentication parameters, in the Cinterion plugin.
> > > >
> > > > And for this, I am going to add the two methods:
> > > >
On Thu, Jul 23, 2020 at 8:16 AM Aleksander Morgado
wrote:
>
> > > > > I will have to run the following sequence:
> > > > > -go in AT+CFUN=4 (airplane mode with SIM connected). This is
> > > > > necessary because the CID might be locked or not taken into account
> > > > > immediately (in
Hi Aleksander,
> >
> > > I will have to run the following sequence:
> > > -go in AT+CFUN=4 (airplane mode with SIM connected). This is
> > > necessary because the CID might be locked or not taken into account
> > > immediately (in case there is an attach attempt ongoing).
> > > -
Hi Aleksander,
On Wed, Jul 22, 2020 at 3:47 PM Aleksander Morgado
wrote:
>
> Hey Giacinto!
>
> >
> > I need to set up the default LTE bearer settings: APN, type of APN,
> > authentication parameters, in the Cinterion plugin.
> >
> > And for this, I am going to add the two methods:
> > void
Dear all,
I need to set up the default LTE bearer settings: APN, type of APN,
authentication parameters, in the Cinterion plugin.
And for this, I am going to add the two methods:
void (* set_initial_eps_bearer_settings)
(MMIfaceModem3gpp *self, ..
gboolean (*
Hi Bruce,
On Sun, Jul 19, 2020 at 4:51 AM Bruce wrote:
>
> Please excuse me if this is an inappropriate place to post this,
> I searched around for a MM User List and this was all I found.
>
> I'm having trouble sending and receiving SMS messages.
> I have done a number of searches for this
Hey,
On Wed, Jun 17, 2020 at 2:19 PM Aleksander Morgado
wrote:
>
> Hey!
>
> >
> > but it seems the ID_MM_CANDIDATE variable isn't there.
> >
> > $ udevadm info /dev/cdc-wdm0
> > P:
> > /devices/pci:00/:00:1d.0/usb3/3-1/3-1.6/3-1.6:2.12/usbmisc/cdc-wdm0
> > N: cdc-wdm0
> > L: 0
> > E:
>
Dear Aleksander, all,
I am starting a new thread because I think the previous one was
filtered as spam, maybe when I added the log?
I collected some more modems and did more tests, and with an ALS3
(supported maybe as PLS8), which uses the single AT^SCFG: "Radio/Band"
value for all technologies,
Hey Aleksander,
thank you for your answer.
On Wed, May 20, 2020 at 11:37 AM Aleksander Morgado
wrote:
>
> Hey Giacinto,
>
> > I have finally submitted a merge request for the band reading and
> > setting for Cinterion Modems.
> >
> > Not sure whether is it good quality, thou. I would appreciate
Hey Aleksander, all,
I have finally submitted a merge request for the band reading and
setting for Cinterion Modems.
Not sure whether is it good quality, thou. I would appreciate a review
and comments.
Starting for example from the naming of the udev variable, and then
the use of other variables
Hey Aleksander,
On Mon, May 18, 2020 at 1:11 PM Aleksander Morgado
wrote:
>
> Hey,
>
> > > > > > > > I am trying to update the code for the Radio/Bands of Cinterion
> > > > > > > > Today in the code there is a parser for this format (only for
> > > > > > > > the test part):
> > > > > > > >
Hi Aleksander,
On Mon, May 18, 2020 at 9:04 AM Aleksander Morgado
wrote:
>
> Hey,
>
> > On Fri, May 15, 2020 at 9:02 PM Aleksander Morgado
> > wrote:
> > >
> > > Hey,
> > > > > > I am trying to update the code for the Radio/Bands of Cinterion
> > > > > > Today in the code there is a parser for
Hey Aleksander,
On Fri, May 15, 2020 at 9:02 PM Aleksander Morgado
wrote:
>
> Hey,
> > > > I am trying to update the code for the Radio/Bands of Cinterion
> > > > Today in the code there is a parser for this format (only for the test
> > > > part):
> > > > AT^SCFG=?
> > > > ^SCFG:
Hey Aleksander,
thank you for your hints.
On Fri, May 15, 2020 at 1:49 PM Aleksander Morgado
wrote:
>
> Hey!
>
> > I am trying to update the code for the Radio/Bands of Cinterion
> > modules, and it seems a nasty job, because of the way the indicators
> > evolved.
> > Today in the code there is
Dear all,
I am trying to update the code for the Radio/Bands of Cinterion
modules, and it seems a nasty job, because of the way the indicators
evolved.
Today in the code there is a parser for this format (only for the test part):
AT^SCFG=?
...
^SCFG: "Radio/Band",("1-479","0-1")
Hi Aleksander,
On Fri, Mar 20, 2020 at 4:01 PM Aleksander Morgado
wrote:
>
> Hey Giacinto,
>
> > I would like to add some Cinterion/Gemalto/Thales modems in
> > ModemManager, and I have some questions:
>
> Nice!
>
> > - first of all, if code from the modem vendors are welcome
> > - is there a
---
configure.ac | 3 +++
1 file changed, 3 insertions(+)
diff --git a/configure.ac b/configure.ac
index 57495032..fad73a66 100644
--- a/configure.ac
+++ b/configure.ac
@@ -46,6 +46,9 @@ AM_PROG_CC_C_O
AC_PROG_INSTALL
AC_PROG_MKDIR_P
+AC_CHECK_PROG(XSLTPROC_CHECK,xsltproc,yes)
+AS_IF([test
tall xsltproc before configuring.])])
My questions are: is there a fast way to submit a simple patch like
this or needs a pull request? Should such a patch also have a matching
bug?
Kind Regards,
Giacinto Cifelli
___
ModemManager-devel mailing lis
34 matches
Mail list logo