I am getting the following error when trying to emerge lirc (undefined
I2C_ALGO_BIT). Googling hasn't gotten me any leads, if you have any
ideas, they would be appreciated. Thank you.
-- Travis
57:
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/kcompat.h:169:1:
warning: this is the
I had the same problem. The newer kenrl (starting with 2.6.13) removed
some of the classes used in lirc = 0.7.2. The CVS version worked for me
and I modified the ebuild to use it. If you're interested you can download
it from here:
My computer does not start for some reason.. i know that my partition hda2
is full and this might be one of the reasons...I also think that there might
be some other problems related wittrying to redirect mythtv recordings to a
new hard drive that it was installedi am no sure if it was
and recordings seem to ignore them. I have
also tried adding the settings to .mplayer/config to no avail.
Basically, I am wondering if I need to spend my time getting xv to
work so I can watch my recordings or if there is another mplayer
options area I missed somewhere. Thanks for the help.
-- Travis
On 11/29/05, Carl Fongheiser [EMAIL PROTECTED] wrote:
MythTV uses XV, although you can turn it off with an environment variable.
(NO_XV). However, it would be a really good idea to get XV working, as it
helps performance a lot. FYI, MythTV proper doesn't use mplayer or mplayer
settings at
, I've taken out all the mplayer options
on the frontend and only left 'mplayer -fs %s'. Any help you can
offer would be appreciated.
-- Travis Osterman
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv
I get an empty file. I've tried searching the mailing list, googling, various
setup procedures found on the net, and just different values but no luck. I'm
not sure what's wrong and any help would be appreciated.
My dmesg looks very similar until the msp stuff (gentoo + pvr250).
What does you
I've got:
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
alias char-major-61 lirc_i2c
#add above ivtv lirc_dev lirc_i2c
Could it be an improper capture card, video source or input connection setup?
I'll admit I was a bit confused by the how to.
Are you using your PVR-350 for output?
Mike
No, just onboard (intel 865G chipset) vga to a monitor.
-- Travis
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Are you using your PVR-350 for output?
Mike
No, just onboard (intel 865G chipset) vga to a monitor.
-- Travis
Update, I was wrong, watching recordings is also affected. Everything
looks great when I kill mythfrontend and watch it directly from the
command line still. Thanks.
--
I know I can manually update my video database throught the myth gui,
but is there a command line call that will do the same? I'd like
to make a cron job take care of making sure that things are
current. Thanks for the input.
-- Travis Osterman
This rig did work before I updated so I think that the hardware is OK. I'vetried using irrecord and this does seem to work after a fashion but I cannot
get all of the buttons to work this way.
What OS are you running? I ran into a few bumps when moving to a newer kernel (udev) on gentoo.
--
Out of curiosity, how did you solve your udevproblems?
I think so. The lircd.conf file that worked really well with devfs
didn't seem to sync as well with udev (in addition to the move from
/dev/lirc0 to /dev/lirc/0). I manually played with a few of the
options and seem to have things working
First, what is the difference in these
cards?
Both have hardware encoding, the 350 has the addition of mpeg decoding
and video out.
if I buy one of these cards, do I also need a video card?
If you get the 250, yes, you'll need a way to get the picture to a tv
or monitor. The 350 has tv-out
[...] I would like
to hear from folks who are having success with v.17.
I don't know if I've ever liked gentoo more.
# emerge mythbrowser mythdvd mythgallery mythgame mythmusic mythnews
mythphone mythvideo mythweather mythtv mythweb mythtv-themes
Roughly thirty minutes later I had 0.17. Two
Or get GMail. It sorts your messages into threads and the search is GREAT.
I second the gmail idea. I am sure you will have no problem finding a
gmail account, I alone have 50 invites now.
I'll third the gmail idea ... by far my 'news client' of choice. The
searching is great, the
[...] recorded video previews with colors that made the
frames look like photo negatives, i.e. the wrong
colors. I added support for my r128 into my kernel
and that solved the problem for that machine
I'm having the same inverted preview colors on my i865G chipset output
on my gentoo 0.16
Mythtv comes up . but the problem is it says : =-
Couldnot connect to the master backend server -- is it running? is the
IP address set for it in the setup program correct?
could anyone please help me in this regard
Could you tell us what operating system you're using? Also, if you
having
I've set X to overscan on my epia M9000 and fixed up the myth gui so
that it pretty much fits (some screens remain too large). However, the
osd menus etc. are too large and partly off the screen. Is there
anyway to adjust the overscan percentages and so forth just for the
OSD. Changing the
I came across this while browsing ebay today:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=7131344272
Is this just in bad taste, or is it against the GPL to sell copies of
the software?
-- Travis
___
mythtv-users mailing list
Paul(or anyone),
Did you ever find whether the on-board video/TV-out of your MS-6215
(Chrontel CH-7007A video encoder, Intel 82801BA graphics,
Intel 815 chipset), worked ok with MythTv ?
I have the i865G chipset on my myth box with the Chrontel chip
described above. My board has vga, RCA,
Try rebooting to insure everything is running on the new versions after
all that.
Tried
You might also try a
/etc/init.d/mysql restart
Tried
just to be sure. Also check out the logs afterward to see if anythings
wierd there.
# tail /var/log/mysql/mysqld.err
050123 11:03:38
not only do you not want to put the -qt flag in the USE variable, you
want to explicitly state the qt flag in there. re-emerge mysql after
you do that to build it with QT support.
I am a bit confused. The mysql package doesn't appear to use the qt flag.
# emerge -pv --newuse mysql
These are
It would be usefull if you did put in some more verbose answers.
Here is a recap of what I have tried without success:
I have tried restarting both mythbackend and mysql.
I have have rebooted (several times)
I have tried running mythsetup as both root and as mythtv without change
I have looked
I thought it was the other way round, you have to emerge qt with mysql
support not mysql with qt support.
Ash.
Loren suggested:
not only do you not want to put the -qt flag in the USE variable, you
want to explicitly state the qt flag in there. re-emerge mysql after
you do that to build it
I suppose you could try that for a bit and remove mysql, qt, mythtv and
then remerge mythtv which should catch them all. You might want to add
qt to the use variable as well to be on the safe side.
# cat /etc/make.conf | grep USE
USE=aac aalib alsa apache2 bootsplash divx4linux doc dv dvd
real samba tiff transcode v4l v4ls X xinerama xvid
I unmerged and remerged qt with no change and am a bit frustrated as
to how I need to proceed. I thank you for any assistance.
-- Travis Osterman
___
mythtv-users mailing list
mythtv-users@mythtv.org
What is the most stable system at this time?
just run and allow recording and playback of
TV plus Music.
I don't know that you'll notice that you'll notice a stability
difference between any *nix systems running Myth. My guess is that
any instability your system incurs is from the packages
I was wondering if its possible for mythvideo to have videos from
multiple folders, ie if i have more than one hard drive with videos on
them?
You were right on with the sym-links, that is exactly what I do. My
setup is like this:
/video/videos is the folder I point myth to
when I want to
http://www.gossamer-threads.com/lists/mythtv/users/97907
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Sorry - I've always been curious - what's so wrong with KDE? I have a
Barton2500 w/ 512MB RAM on a combined frontend/backend box. Are the
lightweight WMs more for people with Epia boxes, and/or those that just
want to try something else? I'm just wondering if there would be any
actual
Anybody have any ideas?
sftp and ftp work for me ... smb transfers give me problems
-- Travis
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
- snip -
picture is similar to this one http://www.boldata.com/html/minipc.cfm
i only want to record tv programs and nothing else will a huppage tv
card fit in this?
There aren't any full-size pci slots in those systems, so no, the pvr
250 will not work. If you're in love with the form
I've been using Myth on my dedicated fc1 box for roughly one year now
and have only wonderful things to say. During the holidays I am
planning on performing some hardware upgrades to my system and am will
be installing gentoo on my Myth box. I haven't ventured far in the
relm of window managers
Thanks to all for the quick responses. Here's the list of
recommendations that were posted. I will probably start with the
smallest and work my way up until I find one that fits the bill.
ratpoison, fluxbox,WMI, icewm, xfce, fvwm, flwm
-- Travis
___
35 matches
Mail list logo
