Dekatron42
Sent: Sunday, May 22, 2016 4:06 AM
To: neonixie-l
Subject: Re: [neonixie-l] 2AP1 CRT help
If they gained access to your computer you should really try to get some help
from someone who knows how to revert that! Did they ask you to enable access to
your computer or did they have access
Ira,
You can also email me at KK6RPX AT gmail DOT com.
Thanks much, I appreciate your efforts to contact me.
Jonathan
I've tried twice now Johnathan to respond to you on this, and
both times
the message comes back to me as being undeliverable. To; J PEAKALL@
MEDLABS.INFO
On 16-05-21 09:53 PM, Instrument Resources of America wrote:
'Medlabs' was a typo on my part just now in that last message. I had
been sending to 'madlabs' all along with no luck, always rejected. Sent
to jpeak...@madlabs.infoagain just now. Rejected again on the second
go round. Here is a p
them to
> this situation and request your hosting be moved to a different IP.
>
>
>
> - Steve
>
>
>
> *From:* neoni...@googlegroups.com [
> mailto:n...@googlegroups.com ] *On Behalf Of *Instrument
> Resources of America
> *Sent:* Saturday, May 21, 2016 9:54
a
different IP.
-Steve
*From:*neonixie-l@googlegroups.com
[mailto:neonixie-l@googlegroups.com] *On Behalf Of *Instrument
Resources of America
*Sent:* Saturday, May 21, 2016 9:54 PM
*To:* neonixie-l@googlegroups.com
*Subject:* Re: [neonixie-l] 2AP1 CRT help
'Medlabs' was a typo on my part
21, 2016 9:54 PM
To: neonixie-l@googlegroups.com
Subject: Re: [neonixie-l] 2AP1 CRT help
'Medlabs' was a typo on my part just now in that last message. I had been
sending to 'madlabs' all along with no luck, always rejected. Sent to
jpeak...@madlabs.infoagain just now
'Medlabs' was a typo on my part just now in that last message. I had
been sending to 'madlabs' all along with no luck, always rejected. Sent
to jpeak...@madlabs.infoagain just now. Rejected again on the second
go round. Here is a partial copy of the message that I'm getting, Ira
jpeak..
madlabs, not medlabs.
On 5/21/16 2:54 PM, Instrument Resources of America wrote:
I've tried twice now Johnathan to respond to you on this, and both times
the message comes back to me as being undeliverable. To; J PEAKALL@
MEDLABS.INFOIra.
On 5/21/2016 12:00 PM, Jonathan Peakall wrote:
I've tried twice now Johnathan to respond to you on this, and both times
the message comes back to me as being undeliverable. To; J PEAKALL@
MEDLABS.INFOIra.
On 5/21/2016 12:00 PM, Jonathan Peakall wrote:
Hi All,
A little OT, but there are some CRT folks on this list.
I am working on
Hi All,
A little OT, but there are some CRT folks on this list.
I am working on a Hallicrafters SP-44 Skyrider Panadapter. I have done a
recap/re-resistor job on it. The CRT display isn't quite right, the
baseline is uneven in width, about right on the left but too wide on the
right. If anyon
10 matches
Mail list logo
