Remove the bleeder valve and stick a wire down through it and clean
out the junk that is blocking it.
On May 28, 2011, at 12:17 AM, snkeyes1...@aol.com wrote:
I am getting very annoyed i rebuild my front master cylinder and
front caliper hooked it all back up and i can't get any fluid out
bubbles to go.
From: graha...@ptd.net
Subject: Re: [Nighthawk Lovers] Brakes please help
Date: Sat, 28 May 2011 02:00:01 -0400
To: nighthawk_lovers@googlegroups.com
Remove the bleeder valve and stick a wire down through it and clean out the
junk that is blocking it.
On May 28, 2011, at 12:17 AM
+1
Sent via BlackBerry by ATT
-Original Message-
From: James O'Gorman aspor...@gmail.com
Sender: nighthawk_lovers@googlegroups.com
Date: Fri, 27 May 2011 23:32:43
To: nighthawk_lovers@googlegroups.com
Reply-To: nighthawk_lovers@googlegroups.com
Subject: Re: [Nighthawk Lovers] Brakes
*Date: *Fri, 27 May 2011 23:32:43 -0500
*To: *nighthawk_lovers@googlegroups.com
*ReplyTo: * nighthawk_lovers@googlegroups.com
*Subject: *Re: [Nighthawk Lovers] Brakes please help
Hmm... With cars, they always recommend bench-bleeing the master cylinder
to get the air out of the main piston. You
what do u mean diaphragm are u talking about the little piece that goes on the
plunger?
-Original Message-
From: Kyle Munz kyle...@gmail.com
To: nighthawk_lovers nighthawk_lovers@googlegroups.com
Sent: Sat, May 28, 2011 10:10 am
Subject: Re: [Nighthawk Lovers] Brakes please help
the little piece that goes on
the plunger?
-Original Message-
From: Kyle Munz kyle...@gmail.com
To: nighthawk_lovers nighthawk_lovers@googlegroups.com
Sent: Sat, May 28, 2011 10:10 am
Subject: Re: [Nighthawk Lovers] Brakes please help
A buddy of mine had this issue once. Hooked
are u talking about the little piece that goes on
the plunger?
-Original Message-
From: Kyle Munz kyle...@gmail.com
To: nighthawk_lovers nighthawk_lovers@googlegroups.com
Sent: Sat, May 28, 2011 10:10 am
Subject: Re: [Nighthawk Lovers] Brakes please help
A buddy of mine had
.
From: Allen Thomas althomas...@gmail.com
To: Nightwawk Lovers nighthawk_lovers@googlegroups.com
Sent: Sat, May 28, 2011 8:06:22 AM
Subject: Re: [Nighthawk Lovers] Brakes please help
+1
Sent via BlackBerry by ATT
From: James
@googlegroups.com] On Behalf Of Paul
Sent: Saturday, May 28, 2011 10:10 AM
To: nighthawk_lovers@googlegroups.com
Subject: Re: [Nighthawk Lovers] Brakes please help
Sometimes when you take the cover off your brake reservoir the black rubber
piece comes off along with the cap. The two need to be separated
I am getting very annoyed i rebuild my front master cylinder and front caliper
hooked it all back up and i can't get any fluid out of the bleeder valve the
brake pad isn't even moving i don't know what i'm doing wrong i pumped the crap
out of the handle and still nothing i can't figure it out
Hmm... With cars, they always recommend bench-bleeing the master cylinder to
get the air out of the main piston. You could try to run an old hard line (or
some kits come with a bench-bleed plastic hose) out the main port and it will
dump directly back into the reseviour. You should be able to
11 matches
Mail list logo