Re: [NTG-context] intertext for aligned equations
Aditya Mahajan wrote:
>
> This does not look good. Consider,
>
> There is too much space after the intertext and the next line. Can you
> provide some magic to reduce this space.
Ok, got it. The \NR has to go away, and the \beforedisplayspace
reinserted, like so:
\def\startintertext#1\stopintertext
{\noalign{\dointertext{#1}}}
\unexpanded\def\dointertext#1%
{\penalty\postdisplaypenalty
\afterdisplayspace
\vbox{\forgetall \noindent #1\par}%
\penalty\predisplaypenalty
\beforedisplayspace }
Looks much better (over here).
Taco
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Frontmatter setup
frantisek holop wrote:
>
> \setupsectionblock
> [frontmatter]
> [before={\setuppagenumbering[location=]}]
I'm sorry, this is my fault. It should have been:
\setupsectionblock
[frontpart] % <- CHANGED
[before={\setuppagenumbering[location=]}]
Cheers, taco
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] multiple line comments
Hi all,
I do the following:
\def\com#1{\blank{\bf commentaar:} {\em #1} ---}
%\def\com#1{}
When I need the comments in my printed text, I put a % for the second
line. Simple.
Kind regards,
Robert
Hans Hagen wrote:
>Hans Hagen wrote:
>
>
>>This one is pretty safe:
>>
>>\startbuffer[comment]
>>bla
>>\startbuffer
>>bla \iftrue \startbuffer bla bla
>>bla \stopbuffer bla bla
>>\stopbuffer
>>bla
>>bla
>>\stopbuffer
>>
>>
>\starthiding
>\stophiding
>
>does not support nesting in the way buffers do (simply because it was
>not enabled); i added a few lines to the buffer handler, so that now we
>can say:
>
>\definebuffer[mycomment][local=yes]
>
>and have
>
>\startmycomment
>
>\stopmycomment
>
>(this extension will be available in the next release)
>
>(btw, in a similar fashion verbatim supports some nesting, which was needed in
>order to be able to write manuals)
>
>Hans
>
>
>-
> Hans Hagen | PRAGMA ADE
> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
> tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
> | www.pragma-pod.nl
>-
>
>___
>ntg-context mailing list
>ntg-context@ntg.nl
>http://www.ntg.nl/mailman/listinfo/ntg-context
>
>
>
>
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] intertext for aligned equations
<--- On Mar 27, Taco Hoekwater wrote --->
>
>
> Hi,
>
> Aditya Mahajan wrote:
>
>> This seems to be working fine. However, \intertext defined in
>> amsmath.sty seems to be doing a lot more (I just can't figure out
>> what it is doing?) Can someone suggest how to make the above command
>> more robust on the lines of \intertext?
>
> It inserts a post/pre-display skip&penalty pair around the intertext,
> then creates a \vbox for use a paragraph. The result is (almost) as if
> it the text was part of the 'normal' text flow between two displays.
>
> I cannot tell you if this would work exactly the same as expected in
> ConTeXt (needs further testing), but a context-like solution would
> look like this:
>
> \def\startintertext#1\stopintertext{%
> \noalign{\dointertext{#1}}\NR}
>
> \unexpanded\def\dointertext#1%
>{\penalty\postdisplaypenalty
> \afterdisplayspace % the matching \before... is not needed
> \vbox{\forgetall \noindent #1\par}%
> \penalty\postdisplaypenalty }
>
This does not look good. Consider,
\def\startintertext#1\stopintertext{%
\noalign{\dointertext{#1}}\NR}
\unexpanded\def\dointertext#1%
{\penalty\postdisplaypenalty
\afterdisplayspace % the matching \before... is not needed
\vbox{\forgetall \noindent #1\par}%
\penalty\postdisplaypenalty }
\startformula \startalign
\NC A_1 \NC= \left| \int_0^1 (x^2 - 3x)\, dx \right|
+ \left| \int_1^2 (x^2 -5x + 6)\, dx \right| \NR
\startintertext
Take limits of both integrals
\stopintertext
\NC \NC = \left| \frac{x^3}{3} - \frac{3}{2} x^2 \right|_0^1
+ \left| \frac {x ^3}{3} - 7 \frac{5}{2} x^2 + 6x \right|_1^2 \NR
\NC \NC = \left| - \frac{7}{6} \right| + \left|\frac{14}{3} -
\frac{23}{6}\right| = \frac{7}{6} + \frac{5}{6} = 2 \NR
\stopalign \stopformula
There is too much space after the intertext and the next line. Can you
provide some magic to reduce this space.
Thanks,
Aditya
--
Aditya Mahajan, EECS Systems, University of Michigan
http://www.eecs.umich.edu/~adityam || Ph: 7342624008
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] bib module/XML
Hello,
I have a couple of questions concerning the bib module, which I'm using in
conjunction with XML document code.
In my header I say:
\usemodule[bib]
\setupbibtex[database={../Bibliography/bibliography.bib}]
1) \completepublications problem
in the xml I say:
and use
\defineXMLargument
[cite]
{\cite[\XMLpar{cite}{key}{}][\XMLpar{cite}{id}{}]}
in my mappings.
This works ok, however, I also have the following definition included:
\defineXMLenvironment
[chapter]
{
\defineXMLargument
[title]
{\chapter}
\defineXMLprocess
[content]
{}
}
{\section{References}\placepublications}
so that a xml chapter definiton like this:
Example
will be read out properly and I get a chapter specific publication list at
the end of each chapter. This does not work. I will get a Reference List,
but it contains the second entry twice and its second copy is indented in
relation to the first ...
Any Idea on how to remedy this?
2) I'm a biologist and author/year citation is usus where I work. The
options 'authoryear' ('Hoekwater (2006)') and 'authoryears' ('(Hoekwater,
2006)') are great, but I would also want to have the option to prepend the
latter with something like 'e.g.' ('(see e.g. Hoekwater, 2006)'). I
understand this is possible to the right of the actual citation
with 'extras', but how difficult would it be to do that on the left?
Thanks for any help,
Joh
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] pdf document info fields
hmm, on Wed, Mar 29, 2006 at 01:36:21AM +0200, frantisek holop said that > Creator:ConTeXt/user/radnoti.tex also, how can i set the "Subject" and "Keywords" fields? \setupinteraction's role in this context is not documented at all (what parameters it takes, etc) but author and title seems to be working. do i have to use the low level pdftex command \pdfinfo? would that not conflict with the ConTeXt's Creator setting routine? -f -- when all think alike, then no one is thinking. ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] pdf document info fields
hi there, what is the rationale behind the "Creator" pdf field context sets? for radnoti.tex i get: Creator:ConTeXt/user/radnoti.tex -f -- you can never get rid of a bad temper by losing it. ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] \setupmarginrules
hmm, on Tue, Mar 28, 2006 at 07:12:18PM +0200, Hans Hagen said that
> \def\doalinealijn#1#2%
> {\doifelsevalue{\??al#2\the\alteller\c!rule}\v!on
> {\linewidth\getvalue{\??al#2\the\alteller\c!rulethickness}%
> \scratchdimen#1%
> \advance\scratchdimen-\linewidth
> \divide\scratchdimen \plustwo
> \hskip\scratchdimen
> \vrule\!!width\linewidth
> \hskip\scratchdimen}
> {\hskip#1}}
excuse my silly question, but what am i to do now?
replace core-mis.tex in my context installation and
also add the \doalinealijn macro to my .tex file?
-f
--
words are not food, though sometimes we must eat them.
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] multiple line comments
On Tuesday 28 March 2006 10:05, Aditya Mahajan wrote: > <--- On Mar 28, Taco Hoekwater wrote ---> > > > andrea valle wrote: > >> Dear all, > >> It's a bit tiring to start many lines always with %. > >> Is it possibile to have multiple line comments like in C > >> > >> \* > >> comments here > >> *\ > > > > \iffalse > > comments here > > \fi When faced with such problems I just comment out a group of lines with one command in my Gvim editor. for example after entering five lines of comments I could use this command: :.,-4 s/^/%/ Try it, you might like it :) -- John Culleton Books with answers to marketing and publishing questions: http://wexfordpress.com/tex/shortlist.pdf Book coaches, consultants and packagers: http://wexfordpress.com/tex/packagers.pdf ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Frontmatter setup
hmm, on Tue, Mar 28, 2006 at 09:11:59PM +0200, nico said that
> On Mon, 27 Mar 2006 11:25:42 +0200, Taco Hoekwater <[EMAIL PROTECTED]>
> wrote:
>
> > nico wrote:
> >> Hello,
> >>
> >> Is there a \setup... command to configure the frontmatter section
> >> block? I
> >> haven't found a clear information about this.
> >
> > You can put your setup in the 'before', like so:
> >
> >\setupsectionblock
> > [frontmatter]
> > [before={\setuppagenumbering[conversion=romannumerals]}]
>
> It does nothing. In this example the TOC and Preamble section still have
> default numbering:
i can second this.
\setupsectionblock
[frontmatter]
[before={\setuppagenumbering[location=]}]
does nothing (visible at least)
on the other hand this works fine:
\startfrontmatter
\setuppagenumbering[location=]
\completecontent
\stopfrontmatter
is setupsectionblock broken?
-f
--
expert - anyone from out of town.
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Imaginary entity rendering in MathML
On Tue, 28 Mar 2006 13:08:50 +0200, Hans Hagen <[EMAIL PROTECTED]> wrote: > Nikolai Weibull wrote: >>> I guess the problem is that the vector unic-033 (=hex 21) only defines >>> the arrow part, that starts at 0x2190 ? >> >> Probably. This vector is far from complete. I've tried to be as >> thorough as possible, but there simply isn't TeX equivalents for all >> symbols in that vector. At least not ones that I have been able to >> find. >> > but imaginary i cum suis should be possible If possible, the followings are useful too in math (at least there are used in the MathML suite ;-): ℏ "h" Planck's constant (\hslash in latex) ⅆ "d" for use in differentials ⅇ "e" exponential base Regards, BG ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] 64-bit linux minimal distribution
On Tue, Mar 28, 2006 at 09:32:31PM +0200, Piotr Kopszak wrote: > Hello again, > > Some time ago I came across an information about 64-bit Minimal > ConTeXt Distribution, but I can't find it anywhere. Right now I have > to stick to Debian tetex 3.0 but this is far from what I want, as > ugrading to most recent ConTeXt breaks the package system. I wasn't > able to setup a separate texmf tree in my home directory. It doesn't > work. So maybe having a separate 64-bit debian in chroot with just a Minimal > ConTeXt Distribution might solve the problem. Sorry for beeing fussy, > but didn't have to make complete ConTeXt reinstallations for couple of > years and now it seems things has changed rather for worse than the better > :( > > Piotr > > > ___ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context OK, I found it in directory view at PRAGMA website. Piotr ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] XML and 'Table of Contents'
Hans Hagen wrote:
First: Thank you for your continued help! Works now, but there seems to be a
bug ... see below.
> texexec --env=xml.ctex --pdf xml.xml
I was wondering whether there is a possibility to use '(new)texexec' with
THREE input files: one describing the XML/ConTeXt mappings, one taking care
of document specific ConTeXt stuff (formating) and one for the XML itself?
Would make the 'mappings' file more portable ...
> \defineXMLargument [tableofcontents] {\completecontent[criterium=text]}
> \defineXMLargument [listoffigures]
> {\completelistoffigures[criterium=text]}
> \defineXMLargument [listoftables]
> {\completelistoftables[criterium=text]}
>
> (by default tocs are local (i.e. if you ask for one in a chapter, you
> get one with sections)
Thank you very much for this - I have entries in my TOC now. However, the
page numbers for my sections show up in the margins ... is this a bug? How
would I fix that?
> btw, if you use newtexexec, you can make a
>
> xml.ctx file that says:
>
>
>
>
> whatever you like
>
>
>
> xml.ctex
>
>
>
>
>
> and directly run:
>
> newtexexec xml.xml
This sounds really great ... but Debian unstable doesn't contain this file
yet - 'texexec --version' gets me:
TeXExec 5.2.4 - ConTeXt / PRAGMA ADE 1997-2005
texexec : TeXExec 5.2.4 - ConTeXt / PRAGMA ADE 1997-2005
texutil : TeXUtil 9.0.0 - ConTeXt / PRAGMA ADE 1992-2004
tex : pdfeTeX, 3.141592-1.21a-2.2 (Web2C 7.5.4)
context : ver: 2005.01.31
cont-en : ver: 2005.01.31 fmt: 2006.3.24 mes: english
total run time : 1 seconds
I'm hesitant to leave debian for this at this point - need all the time a
can get for this document - will the 'newtexexec' script just work with any
ole' ConTeXt install?
Joh
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] 64-bit linux minimal distribution
Hello again, Some time ago I came across an information about 64-bit Minimal ConTeXt Distribution, but I can't find it anywhere. Right now I have to stick to Debian tetex 3.0 but this is far from what I want, as ugrading to most recent ConTeXt breaks the package system. I wasn't able to setup a separate texmf tree in my home directory. It doesn't work. So maybe having a separate 64-bit debian in chroot with just a Minimal ConTeXt Distribution might solve the problem. Sorry for beeing fussy, but didn't have to make complete ConTeXt reinstallations for couple of years and now it seems things has changed rather for worse than the better :( Piotr ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Frontmatter setup
On Mon, 27 Mar 2006 11:25:42 +0200, Taco Hoekwater <[EMAIL PROTECTED]>
wrote:
> nico wrote:
>> Hello,
>>
>> Is there a \setup... command to configure the frontmatter section
>> block? I
>> haven't found a clear information about this.
>
> You can put your setup in the 'before', like so:
>
>\setupsectionblock
> [frontmatter]
> [before={\setuppagenumbering[conversion=romannumerals]}]
It does nothing. In this example the TOC and Preamble section still have
default numbering:
% to have page numbers in roman in frontmatter
\setupsectionblock
[frontmatter]
[before={\setuppagenumbering[conversion=romannumerals]}]
\starttext
\startfrontmatter
\completecontent
\chapter{Preamble}
blah blah blah blah blah blah blah blah
blah blah blah blah blah blah blah blah
blah blah blah blah blah blah blah blah
\stopfrontmatter
\startbodymatter
\chapter{A body chapter}
blah blah blah blah blah blah blah blah
blah blah blah blah blah blah blah blah
blah blah blah blah blah blah blah blah
\stopbodymatter
\stoptext
But, of course, doing this works:
...
\startfrontmatter
\setuppagenumbering[conversion=romannumerals]
\completecontent
\chapter{Preamble}
blah blah blah blah blah blah blah blah
blah blah blah blah blah blah blah blah
blah blah blah blah blah blah blah blah
\stopfrontmatter
...
Regards,
BG
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] XML and title page rule
>>> Something &emdash; or Something else >>> >> can somebody explain to a complete newbie why entity &emdash; isn't >> expanded out of the box? >> >> (I use texexec -pdf document.tex for processing.) >> >> > did you define the entity? Thanks. No I expected the example to be a minimal example, where everything else should work. And & entity did work (yes, I know it has a special meaning in XML, so it is probably predefined). Jano ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] \setupmarginrules
Vit Zyka wrote:
> Taco Hoekwater wrote:
>
>> Vit Zyka wrote:
>>
>>
>>> \dimen3=\getvalue{\??al#2\the\alteller\c!rulethickness}% VZ
>>>
>> Taco Hoekwater wrote:
>>
>>
>>> \dimen4=\getvalue{\??al#2\the\alteller\c!rulethickness}% VZ
>>>
>> That's funny ;)
>>
>> Cheers, Taco
>>
>
> Yes funny. Even line position is the same. But why 4? I know: why not.
>
> Will be move to distro? (Indifferent which version.) Old code contained
> buggy space calculation and the rule position, I think.
>
>
well, this feature needs an overhaul anyway
Hans
-
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] \setupmarginrules
Taco Hoekwater wrote:
>
> Vit Zyka wrote:
>
>> \dimen3=\getvalue{\??al#2\the\alteller\c!rulethickness}% VZ
>
>
> Taco Hoekwater wrote:
>
>> \dimen4=\getvalue{\??al#2\the\alteller\c!rulethickness}% VZ
>
>
> That's funny ;)
>
> Cheers, Taco
Yes funny. Even line position is the same. But why 4? I know: why not.
Will be move to distro? (Indifferent which version.) Old code contained
buggy space calculation and the rule position, I think.
Vit
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] \setupmarginrules
Vit Zyka wrote:
> Willi Egger wrote:
>
>> Hi Vit!
>>
>> Thanks for this patch. Do you know why the rulethickness must be given
>> in integer dimension. e.g. 2.5pt will cause an error, telling that a
>> wrong dimension is used.
>>
>> Willi
>>
>
> Due to my fault. Sorry. This is a little bit better solution:
>
> ---
> \defineparagraphs [poem][n=2,distance=20pt]
> \setupparagraphs[poem][1][width=.25\textwidth]
> \setupparagraphs[poem][2][rule=on,rulethickness=5.5pt]
>
> \unprotected
> \def\doalinealijn#1#2%
>{\doifelsevalue{\??al#2\the\alteller\c!rule}\v!on
> {\dimen2=#1\relax
>\dimen3=\getvalue{\??al#2\the\alteller\c!rulethickness}% VZ
>\hskip.5\dimen2
> % \hskip-\linewidth
>\hskip-.5\dimen3 % VZ
> % \vrule\!!width\linewidth
>\vrule\!!width\dimen3 % VZ
>\hskip-.5\dimen3 % VZ
>\hskip.5\dimen2}
> {\hskip#1}}
>
> \starttext
> \startpoem
> \input knuth
> \nextpoem
> \input knuth
> \stoppoem
> \stoptext
>
>
don't use dimen 3 locally (tex convention, has to do with stack build-up)
Hans
-
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] XML and title page rule
Jano Kula wrote: > Hi, > > >> Something &emdash; or Something else >> > > can somebody explain to a complete newbie why entity &emdash; isn't > expanded out of the box? > > (I use texexec -pdf document.tex for processing.) > > did you define the entity? Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] multiple line comments
Hans Hagen wrote: > This one is pretty safe: > > \startbuffer[comment] > bla > \startbuffer > bla \iftrue \startbuffer bla bla > bla \stopbuffer bla bla > \stopbuffer > bla > bla > \stopbuffer \starthiding \stophiding does not support nesting in the way buffers do (simply because it was not enabled); i added a few lines to the buffer handler, so that now we can say: \definebuffer[mycomment][local=yes] and have \startmycomment \stopmycomment (this extension will be available in the next release) (btw, in a similar fashion verbatim supports some nesting, which was needed in order to be able to write manuals) Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] XML and title page rule
Hi, > Something &emdash; or Something else can somebody explain to a complete newbie why entity &emdash; isn't expanded out of the box? (I use texexec -pdf document.tex for processing.) > Here is the hint - needs to be wikified now ... -) I can't resist to do so (that's why I need an explanation), cause as a newbie I see the only weakness of the ConTeXt in the lack of documentation. Well, there is a lot of it, maybe there is too much of it spread all over the different places (that's why wiki is here), maybe I'm not familiar enough with ConTeXt yet, but as a long term user of LaTeX I'm still quite confused after a week or so of browsing through the documentation, trying to find out how the things work and how they are related. Well, it took some time to understand LaTeX, too. I would buy the book mentioned here immediatelly. These are not complaints, just another hint how to smooth starting with ConTeXt. As I see the possibilities I become addicted ;) and I do understand the developers have a lot of work with developing. Would anybody who suggests the wikifying mind the proper place to put it in the wiki, if known? Or I shouldn't care and the administators tide it up occasionally. As a newbie I might not to think of writing to wiki, but better something than nothing, right? As the new one here, I can add some small examples as I learn and test the things, what would be nice for the newcomers, if somebody experienced would add to wiki an explanation of the documentations in terms of user experience 1. "must read" 2. how the things work (texexec, etc.) 3. simple topics 4. advanced features If I see the all-manuals page (http://www.pragma-ade.com/show-man.pdf) I really don't know where to start. All the titles look so interesting! Such overview could postpone the temptation to seek for advanced topic and subsequently get lost, as in my case. (Might be only my fault.) Sorry for the desperade bigginer's notes, hope they help. To finish it why I can't get these two (advanced) pages? http://www.pragma-ade.com/makeres.html http://www.pragma-ade.com/general/manuals/xcorresp.pdf_Serial_Letters Looking forward to use ConTeXt, Jano ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] multiple line comments
Aditya Mahajan wrote:
> <--- On Mar 28, Taco Hoekwater wrote --->
>
>
>> andrea valle wrote:
>>
>>> Dear all,
>>> It's a bit tiring to start many lines always with %.
>>> Is it possibile to have multiple line comments like in C
>>>
>>> \*
>>> comments here
>>> *\
>>>
>> \iffalse
>> comments here
>> \fi
>>
>
> Be careful with this. From the UK tex FAQ
>
> The simple \newcommand{\gobble}[1]{} and \iffalse ... \fi aren't
> really satisfactory (as a general solution) for comments, since the
> matter being skipped is nevertheless scanned by TeX, not always as you
> would expect. The scanning imposes restrictions on what you're allowed
> to skip; this may not be a problem in today's job, but could return to
> bite you tomorrow. For an example of surprises that may come to bite
> you, consider the following example (derived from real user
> experience):
>
> \iffalse % ignoring this bit
> consider what happens if we
> use \verb|\iftrue| -- a surprise
> \fi
>
> The \iftrue is spotted by TeX as it scans, ignoring the \verb command;
> so the \iffalse isn't terminated by the following \fi. Also, \gobble
> is pretty inefficient at consuming anything non-trivial, since all the
> matter to be skipped is copied to the argument stack before being
> ignored.
>
This one is pretty safe:
\startbuffer[comment]
bla
\startbuffer
bla \iftrue \startbuffer bla bla
bla \stopbuffer bla bla
\stopbuffer
bla
bla
\stopbuffer
-
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] \setupmarginrules
Vit Zyka wrote:
>\dimen3=\getvalue{\??al#2\the\alteller\c!rulethickness}% VZ
Taco Hoekwater wrote:
>\dimen4=\getvalue{\??al#2\the\alteller\c!rulethickness}% VZ
That's funny ;)
Cheers, Taco
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] \setupmarginrules
Willi Egger wrote:
> Hi Vit!
>
> Thanks for this patch. Do you know why the rulethickness must be given
> in integer dimension. e.g. 2.5pt will cause an error, telling that a
> wrong dimension is used.
>
> Willi
Due to my fault. Sorry. This is a little bit better solution:
---
\defineparagraphs [poem][n=2,distance=20pt]
\setupparagraphs[poem][1][width=.25\textwidth]
\setupparagraphs[poem][2][rule=on,rulethickness=5.5pt]
\unprotected
\def\doalinealijn#1#2%
{\doifelsevalue{\??al#2\the\alteller\c!rule}\v!on
{\dimen2=#1\relax
\dimen3=\getvalue{\??al#2\the\alteller\c!rulethickness}% VZ
\hskip.5\dimen2
% \hskip-\linewidth
\hskip-.5\dimen3 % VZ
% \vrule\!!width\linewidth
\vrule\!!width\dimen3 % VZ
\hskip-.5\dimen3 % VZ
\hskip.5\dimen2}
{\hskip#1}}
\starttext
\startpoem
\input knuth
\nextpoem
\input knuth
\stoppoem
\stoptext
Vit
> Vit Zyka wrote:
>
>
>>frantisek holop wrote:
>>
>>
>>
>>>hmm, on Sun, Mar 26, 2006 at 10:12:01PM +0200, Vit Zyka said that
>>>
>>>
>>>
>>>
>\defineparagraphs [poem][n=2]
>\setupparagraphs[poem][1][width=.25\textwidth]
>\setupparagraphs[poem][2][rule=on]
>
>\setupmarginrules [rulethickness=5pt]
>
>
this sets rules for margins. I guess the solution
\setupparagraphs[poem][2][rule=on,rulethickness=5pt]
>>>
>>>sorry, i forgot to add, that i tried this one also :)
>>>seemed logical, but the result is the same.
>>>
>>>-f
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] multiple line comments
<--- On Mar 28, Taco Hoekwater wrote --->
>
>
> andrea valle wrote:
>> Dear all,
>> It's a bit tiring to start many lines always with %.
>> Is it possibile to have multiple line comments like in C
>>
>> \*
>> comments here
>> *\
>
> \iffalse
> comments here
> \fi
Be careful with this. From the UK tex FAQ
The simple \newcommand{\gobble}[1]{} and \iffalse ... \fi aren't
really satisfactory (as a general solution) for comments, since the
matter being skipped is nevertheless scanned by TeX, not always as you
would expect. The scanning imposes restrictions on what you're allowed
to skip; this may not be a problem in today's job, but could return to
bite you tomorrow. For an example of surprises that may come to bite
you, consider the following example (derived from real user
experience):
\iffalse % ignoring this bit
consider what happens if we
use \verb|\iftrue| -- a surprise
\fi
The \iftrue is spotted by TeX as it scans, ignoring the \verb command;
so the \iffalse isn't terminated by the following \fi. Also, \gobble
is pretty inefficient at consuming anything non-trivial, since all the
matter to be skipped is copied to the argument stack before being
ignored.
Aditya
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] \setupmarginrules
Hi Willi (and Vit),
Willi Egger wrote:
> Hi Vit!
>
> Thanks for this patch. Do you know why the rulethickness must be given
> in integer dimension. e.g. 2.5pt will cause an error, telling that a
> wrong dimension is used.
(I'll pretend to be Vit)
That is because in that case, it expands to \hskip -.52.5pt
Try this:
\unprotected
\def\doalinealijn#1#2%
{\doifelsevalue{\??al#2\the\alteller\c!rule}\v!on
{\dimen2=#1\relax
\dimen4=\getvalue{\??al#2\the\alteller\c!rulethickness}% VZ
\hskip.5\dimen2
\hskip-.5\dimen4 % TH
\vrule\!!width\dimen4 % TH
\hskip-.5\dimen4 % TH
\hskip.5\dimen2}
{\hskip#1}}
Cheers, Taco
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Imaginary entity rendering in MathML
Taco Hoekwater wrote: > Hans Hagen wrote: > >>> Probably. This vector is far from complete. I've tried to be as >>> thorough as possible, but there simply isn't TeX equivalents for all >>> symbols in that vector. At least not ones that I have been able to >>> find. >>> >>> >> but imaginary i cum suis should be possible >> > > They would need \definemathsymbol lines as well then, right? > sure, they can be modeled after the x-newmme.tex entries Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Frontmatter setup
Hi Frantisek,
May be that the example on page 81 of the main manual is an idea.
If you want to control the placing of the pagenumbers you can switch
placing the number off by \setuppagenumering[location=]
Herafter you can setup header and or footer to place the pagenumber at
the place you want it.
Willi
frantisek holop wrote:
>hmm, on Tue, Mar 28, 2006 at 02:19:54AM +0200, frantisek holop said that
>
>
>>hmm, on Mon, Mar 27, 2006 at 11:25:42AM +0200, Taco Hoekwater said that
>>
>>
>>>\setupsectionblock
>>> [name]
>>> [number=yes|no,
>>>page=yes|right,
>>>before=\command,
>>>after=\command]
>>>
>>>
>>this doesn't seem to work with ver: 2006.02.15
>>
>>\setupsectionblock [frontmatter][number=no]
>>
>>\setuppagenumbering
>> [location=footer, alternative=doublesided,
>> left=$\diamond$\ , right=\ $\diamond$]
>>
>>
>
>i am sorry, i am an idiot. number is for something else, right?
>i don't what, but i just assumed it is for page numbers.
>
>so i am trying now:
>
>\setupsectionblock
> [frontmatter]
> [before={\setuppagenumbering[state=none]}]
>
>but i still get pagenumbers. what is the correct \setuppagenumbering
>parameter to turn off page numbers? \setuppagenumbering's state
>lists only "start" and "stop", but \setupsubpagenumber's state
>also lists "none".
>
>
>the only way i don't get page numbers in the content is when i turn
>off pagenumbers for all the document:
>
>\setuppagenumbering
> [location=footer, alternative=doublesided, state=none]
>
>
>does \setuppagenumbering override \setupsectionblock ?
>
>-f
>
>
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] \setupmarginrules
Hi Vit!
Thanks for this patch. Do you know why the rulethickness must be given
in integer dimension. e.g. 2.5pt will cause an error, telling that a
wrong dimension is used.
Willi
Vit Zyka wrote:
>frantisek holop wrote:
>
>
>>hmm, on Sun, Mar 26, 2006 at 10:12:01PM +0200, Vit Zyka said that
>>
>>
>>
\defineparagraphs [poem][n=2]
\setupparagraphs[poem][1][width=.25\textwidth]
\setupparagraphs[poem][2][rule=on]
\setupmarginrules [rulethickness=5pt]
>>>this sets rules for margins. I guess the solution
>>>
>>>\setupparagraphs[poem][2][rule=on,rulethickness=5pt]
>>>
>>>
>>sorry, i forgot to add, that i tried this one also :)
>>seemed logical, but the result is the same.
>>
>>-f
>>
>>
>
>OK, there is a patch (with minor correction):
>
>---
>\defineparagraphs [poem][n=2,distance=20pt]
>\setupparagraphs[poem][1][width=.25\textwidth]
>\setupparagraphs[poem][2][rule=on,rulethickness=10pt]
>
>\unprotected
>\def\doalinealijn#1#2%
> {\doifelsevalue{\??al#2\the\alteller\c!rule}\v!on
> {\dimen2=#1\relax
> \hskip.5\dimen2
>% \hskip-\linewidth
> \hskip-.5\getvalue{\??al#2\the\alteller\c!rulethickness}% VZ
>% \vrule\!!width\linewidth
> \vrule\!!width\getvalue{\??al#2\the\alteller\c!rulethickness}% VZ
> \hskip-.5\getvalue{\??al#2\the\alteller\c!rulethickness}% VZ
> \hskip.5\dimen2}
> {\hskip#1}}
>
>\starttext
>\startpoem
>\input knuth
>\nextpoem
>\input knuth
>\stoppoem
>\stoptext
>-
>
>for distro it also should be accompanied by
>
> \c!rulethickness=\linewidth,
>
>in \def\dodefineparagraphs[#1][#2]%
>
>Vit
>___
>ntg-context mailing list
>ntg-context@ntg.nl
>http://www.ntg.nl/mailman/listinfo/ntg-context
>
>
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Imaginary entity rendering in MathML
Hans Hagen wrote: >> >>Probably. This vector is far from complete. I've tried to be as >>thorough as possible, but there simply isn't TeX equivalents for all >>symbols in that vector. At least not ones that I have been able to >>find. >> > > but imaginary i cum suis should be possible They would need \definemathsymbol lines as well then, right? Cheers, Taco ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Miktex, Metapost and \loadfontfilesoncetrue
On 3/28/06, Hans Hagen wrote: > WN wrote: > > Hi, > > > > I am using Miktex (latest updated version) and the latest > > Context on WindowsXP (write18 enabled). > > > > This is what happens : > > > > 1) First run of texexec gives me > > ! Undefined control sequence > > l 1 \global \loadfontfileoncetrue > > > > > probably a mismatch between an old format and new tex files This looks like the neverending(?) problem (see http://article.gmane.org/gmane.comp.tex.context/7649/match=loadfontfileoncetrue from 2002) with texexec.pl running the metapost btex ... etex code with plain tex format instead of ConTeXt format. (newtexexec isn't fixed yet either) Plain tex doesn't know about the \loadfontfileoncetrue command, that's why it's complaining. I might be wrong, but at least that was the problem I experienced on different computers that I use. Mojca (PS for "gnuplotters": Sorry for being "a bit offline" in the last weeks.) ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] multiple line comments
> no, features Thanks, they are so many...:-) Best -a- Andrea Valle DAMS - Facoltà di Scienze della Formazione Università degli Studi di Torino http://www.semiotiche.it/andrea [EMAIL PROTECTED] ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] multiple line comments
andrea valle wrote:
> Ah! I was pretty sure there was a way...Better, two.
> (just to understand, in some way they're two hacks, aren't they?)
>
no, features
there is also (slow):
\starthiding
\stophiding
or
\def\startmycomment{\gobbleuntil\stopmycomment}
\startmycomment
\stopmycomment
(\startcomment is something different)
Hans
-
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] multiple line comments
Ah! I was pretty sure there was a way...Better, two. (just to understand, in some way they're two hacks, aren't they?) Thanks -a- On 28 Mar 2006, at 13:09, Hans Hagen wrote: > Taco Hoekwater wrote: >> andrea valle wrote: >> >>> Dear all, >>> It's a bit tiring to start many lines always with %. >>> Is it possibile to have multiple line comments like in C >>> >>> \* >>> comments here >>> *\ >>> >> >> \iffalse >> comments here >> \fi >> > or > > \startmode[my comment] > > \stopmode > > Hans > > - > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com > | www.pragma-pod.nl > - > > ___ > ntg-context mailing list > ntg-context@ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context > > Andrea Valle DAMS - Facoltà di Scienze della Formazione Università degli Studi di Torino http://www.semiotiche.it/andrea [EMAIL PROTECTED] ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] multiple line comments
Taco Hoekwater wrote: > andrea valle wrote: > >> Dear all, >> It's a bit tiring to start many lines always with %. >> Is it possibile to have multiple line comments like in C >> >> \* >> comments here >> *\ >> > > \iffalse > comments here > \fi > or \startmode[my comment] \stopmode Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Imaginary entity rendering in MathML
Nikolai Weibull wrote:
> On 3/28/06, Taco Hoekwater <[EMAIL PROTECTED]> wrote:
>
>
>> nico wrote:
>>
>
>
>>> The following MathML test case (rec-arg1) using newmml does not render the
>>> imaginary entity ⅈ correctly. It is shown as a minus ("-") instead
>>> of "i". I have this behaviour for any test using this entity.
>>>
>
>
>> I guess the problem is that the vector unic-033 (=hex 21) only defines
>> the arrow part, that starts at 0x2190 ?
>>
>
> Probably. This vector is far from complete. I've tried to be as
> thorough as possible, but there simply isn't TeX equivalents for all
> symbols in that vector. At least not ones that I have been able to
> find.
>
but imaginary i cum suis should be possible
Hans
--
-
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] multiple line comments
andrea valle wrote: > Dear all, > It's a bit tiring to start many lines always with %. > Is it possibile to have multiple line comments like in C > > \* > comments here > *\ \iffalse comments here \fi Cheers, Taco ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
[NTG-context] multiple line comments
Dear all,
It's a bit tiring to start many lines always with %.
Is it possibile to have multiple line comments like in C
\*
comments here
*\
I wasn't able to find anything like it in manual.
In this case, what about a \startcomment \stopccoment syntax?
Or maybe is it possible to have a user defined command?
\comment{
comments here
}
Thanks
-a-
Andrea Valle
DAMS - Facoltà di Scienze della Formazione
Università degli Studi di Torino
http://www.semiotiche.it/andrea
[EMAIL PROTECTED]
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Imaginary entity rendering in MathML
On 3/28/06, Taco Hoekwater <[EMAIL PROTECTED]> wrote:
> nico wrote:
> > The following MathML test case (rec-arg1) using newmml does not render the
> > imaginary entity ⅈ correctly. It is shown as a minus ("-") instead
> > of "i". I have this behaviour for any test using this entity.
> I guess the problem is that the vector unic-033 (=hex 21) only defines
> the arrow part, that starts at 0x2190 ?
Probably. This vector is far from complete. I've tried to be as
thorough as possible, but there simply isn't TeX equivalents for all
symbols in that vector. At least not ones that I have been able to
find.
nikolai
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] RFC: 'What would you like in an Text Editor?'
On 3/28/06, frantisek holop <[EMAIL PROTECTED]> wrote: [Vim can basically do everything you want] > having said that i am a new context user and i don't know if there's > something specifically for context. There's a syntax definition for ConTeXt. It's going to be modified for v7, as we're trying to consolidate all the TeXes. I'm currently maintaining the coretex.vim, plaintex.vim, and context.vim. nikolai ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Automatic typesetting of catalogue entries
Taco Hoekwater wrote: > Piotr Kopszak wrote: > >> That's superb! Certainly worth wikifying, maybe someone better versed >> in ConTeXt than me cared also to explain what's going on in here. >> > > The first definition simply puts two on a page, using a counter > to decide whether it is processing the top one or the bottom one, > and using half of the page for each of them. > > The second definition also has two per page, but it uses the height > of the typeset text to scale the images instead of using a fixed > value based on the page dimension. It pdftex's positioning extensions > to do so (that is the source the \hpos and \MPy commands). It has to > disregard the actual size of the placed graphic to prevent it from > interfering, and that is the reason for \ht\scratchbox\strutheight > line (consider it a vertical version of \llap). > thanks such samples + explanations are also nice for the practex journal or maps or tugboat or ... Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Miktex, Metapost and \loadfontfilesoncetrue
WN wrote: > Hi, > > I am using Miktex (latest updated version) and the latest > Context on WindowsXP (write18 enabled). > > This is what happens : > > 1) First run of texexec gives me > ! Undefined control sequence > l 1 \global \loadfontfileoncetrue > > probably a mismatch between an old format and new tex files Hans -- - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] XML and 'Table of Contents'
Johannes Graumann wrote:
> Aaarghh ... attachments here ...
>
texexec --env=xml.ctex --pdf xml.xml
with
\defineXMLargument [tableofcontents] {\completecontent[criterium=text]}
\defineXMLargument [listoffigures]
{\completelistoffigures[criterium=text]}
\defineXMLargument [listoftables]
{\completelistoftables[criterium=text]}
(by default tocs are local (i.e. if you ask for one in a chapter, you
get one with sections)
btw, if you use newtexexec, you can make a
xml.ctx file that says:
whatever you like
xml.ctex
and directly run:
newtexexec xml.xml
> Johannes Graumann wrote:
>
>
>> Hans Hagen wrote:
>>
>>> \defineXMLenvironment
>>> [chapter]
>>> {\defineXMLargument[title]{\chapter}
>>> \defineXMLprocess[content]}
>>> {}
>>>
>>> \defineXMLargument
>>> [tableofcontents]
>>> {\completecontent}
>>>
>>>
>>>
>>> Title
>>>
>>>
>>> Text.
>>>
>>>
>>>
>> Hans, thank you so much for your patience with this ambitious newbie ...
>> who still can't get this to work. With your help (see above) the chapter
>> is now showing up as intended - but still missing from the table of
>> contents (which I already had defined as you propose).
>>
>> I attach my xml and the ConTeXt file embedding it, as well as the pdf
>> output and would greatly appreciate if you (or some other kind soul) could
>> enlighten me as to what I am doing wrong.
>>
>> Thanks for all the help!
>>
>> Deadlined, Joh
>>
>>
>>
>> ___
>> ntg-context mailing list
>> ntg-context@ntg.nl
>> http://www.ntg.nl/mailman/listinfo/ntg-context
>>
--
-
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Imaginary entity rendering in MathML
nico wrote:
> Hello,
>
> The following MathML test case (rec-arg1) using newmml does not render the
> imaginary entity ⅈ correctly. It is shown as a minus ("-") instead
> of "i". I have this behaviour for any test using this entity.
I guess the problem is that the vector unic-033 (=hex 21) only defines
the arrow part, that starts at 0x2190 ?
Cheers, Taco
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Re: [NTG-context] Automatic typesetting of catalogue entries
Piotr Kopszak wrote: > That's superb! Certainly worth wikifying, maybe someone better versed > in ConTeXt than me cared also to explain what's going on in here. The first definition simply puts two on a page, using a counter to decide whether it is processing the top one or the bottom one, and using half of the page for each of them. The second definition also has two per page, but it uses the height of the typeset text to scale the images instead of using a fixed value based on the page dimension. It pdftex's positioning extensions to do so (that is the source the \hpos and \MPy commands). It has to disregard the actual size of the placed graphic to prevent it from interfering, and that is the reason for \ht\scratchbox\strutheight line (consider it a vertical version of \llap). Cheers, Taco ___ ntg-context mailing list ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
