[NTG-context] wikiadmin
Hi, whom to contact for user issue with the contextgarden-wiki? Thanks P. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] counter reseting at every heading
Thanks Wolfgang, the solution with \startchapter and insidesection works fine. I wasn't aware of that \startchapter-stucture at all. Regarding to "The \startchapter command is recommended over \bookmark as the latter might become obsolete" from http://wiki.contextgarden.net/PDF_Bookmarks_and_Headers is that also the new recommended way of defining chapters instead of \chapter{..}? P. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] counter reseting at every heading
Hi, few months ago (18th may) I asked about how to setup a counter that resets after each heading (chapter, section, subsection, subsubsection and so on. I got three possibilities then but none of them was implemented (and still is not): 1) \definecounter[ParagraphNumber][prefix=no,way={bychapter,bysection,bysubsection,bysubsubsection}] 2) \definecounter[ParagraphNumber][prefix=no,way=byheader] 3) \setuphead[chapter,section,subsection,subsubsection][after={\resetcounter[ParagraphNumber]}] as soon the spaces are defined over spaceafter instead of after. Is there a forth option out? Or can anyone tell me what the defaults spaces are so that I can copy them manually? Thanks P. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] counter reseting at every heading
Hi, I realized yesterday that my counter for the module does not reset itself as before. What I need is a counter that resets after each heading (chapter, section, subsection, subsubsection and so on). This is what I know about counter reseting at the moment: \definecounter[ParagraphNumber][prefix=no,way=bysection] - way=bychapter: reseting counter at every chapter (default) - way=bysection: reseting counter at every section (not at chapters) - way={bychapter,bysection,bysubsection,bysubsubsection}: does not work \setuphead[chapter,section,subsection,subsubsection][after={\resetcounter[ParagraphNumber]}] does work but it messes with the distance between heading and normal text. What is the correct/best way to make the counter reseting every heading without messing around? Thanks P. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] multi language (with module)
Thanks Wolfgang, your post helped me a lot! I am wondering if only a subset of languages is able to be defined as I got following result: Should be Welcome: Welcome Should be Guten Tag: Guten Tag Should be Bonvenon: Guten Tag The Esperanto text is not displayed. It does not matter wether I put the eo definition into the module or normal tex file. This source I used: --8
[NTG-context] multi language (with module)
Hi, to finish my first module I like to make it also available for non-german users (remove the hardcoded german text). But I could not figure out how in a way that works. So I wrote down a minimal example in pseudo-tex to point out my goal. Can you give me an idea/solution how to implement it in a correct way? Thanks, P. --8<--t-welcome.tex \startmodule[welcome] \unprotect \setupmodule[atPageText=] %these two lines are properly totally wrong but should show the idea \define[atPageText[en]={Welcome}] \define[atPageText[de]={Willkommen}] \def\welcome{\moduleparameter{welcome}{atPageText}} \protect \stopmodule \endinput --8<---welcome.tex--- %this line is properly totally wrong but should show the idea \usemodule[welcome][atPageText[eo]={Bonvenon},atPageText[de]={Guten Tag}]] \starttext \language[en] Should be Welcome: \welcome \language[de] Should be Guten Tag: \welcome \language[eo] Should be Bonvenon: \welcome \stoptext ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] atpage || number comparing
Hi, it tried to do a \atpage command that results a) some page => nothing b) different page => pagenumber with some text (e.g. "auf Seite XY") \def\atPage[#1]% {\doifnot{\at[#1]}{\currentpage}% {\at[#1]}% } My problem with this is, that the \doifnot always results as not equal; it is like the types mismatch as if I exchange \at[#1] with a pure number the comparing works. If so, how can the types be corrected? Additionally - if possible - I would like to add case that the referred page is on the other page but in duplex mode adjacent to the actual page. Is that possible to do this? I unluckily dont know how to make working simple calculation in tex code. To be complete I found in the file strc-ref.mkiv some notes about a planed \atpage command: %D A still very rudimentary|/|experimental forward|/|backward %D reference mechanism is provided by the macro \type{\atpage}: %D %D \starttyping %D ... \somewhere{backward text}{forward text}[someref] ... %D ... \atpage[someref] ... %D \stoptyping %D %D In future versions there will be more sophisticated % 0 = no page reference % 1 = same page % 2 = preceding page % 3 = following page % 4 = backward, same page (todo) % 5 = forward, same page (todo) But that level of the ambient tex is still out of my scope. Thanks P. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] color as module parameter (mkiv)
Hi, I am trying to pass a tex color as a paramter to a module. I used the example from the wiki as a base. But as soon I hand over a color directly it does not work. Any help is welcome as I am looking forward to hand in my first module. Are there any rules how and where to hand in a module for context? Thanks P. --8<---Modul: bgcolor.tex--- \startmodule[bgcolor] \unprotect \definecolor[grau][s=.35] \setupmodule[color=grau] \setupbackgrounds[page][background=color,backgroundcolor=\currentmoduleparameter{color}] \protect \stopmodule \endinput --8<--tex file itself- \setupcolors[state=start] \definecolor[bordeaux][r=.66] \usemodule[bgcolor][color=bordeaux] \starttext Hello world! \stoptext ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] Did usage of \expanded changed?
> See this thread: > http://archive.contextgarden.net/message/20120402.144627.e46a9f9f.en.html > > and try to construct a "minimal example" next time. I converted my number to counter and shrinked my example - but the problem still occurs: Instead of the counter value when I set the reference I get always the latest value: Should be 1: 3 Should be 2: 3 Should be 3: 3 instead of Should be 1: 1 Should be 2: 2 Should be 3: 3 ---8<--shrinked example-- \unprotect \definecounter[ParagraphCounter][way=bysection,prefix=no] \def\markParagraph[#1]% {\getrawparameters[Paragraph][mark=,#1]% \incrementcounter[ParagraphCounter]% \expanded{\textreference[\Paragraphmark]{\convertedcounter[ParagraphCounter]}}} \protect \starttext \markParagraph[mark=aaa] \input tufte \markParagraph[mark=bbb] \input tufte \markParagraph[mark=ccc] Should be 1: \in[aaa] Should be 2: \in[bbb] Should be 3: \in[ccc] \stoptext ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] Did usage of \expanded changed?
Hi, I "reactivated" some code that was working a year ago. But now it seems that \expanded has no effect in my case (see below). I also tried it with \normalexpanded and \expandedafter but both had also no effect. My problem seems to be this line of the full example below: \doifsomething\Paragraphmark{\expanded{\textreference[\Paragraphmark]{\fullheadnumber/\rawnumber[ParagraphNumber]}}}% The error shows itself in the line: Should be 1/1: \in[test] As \in[test] gives me 1/3 instead of 1/1. (1 was the number assigned to the first paragraph - 3 is the acutal number). Can someone tell me what I need to change? Thanks in advanced P. -8<---full example--- \unprotect \definenumber[ParagraphNumber][way=bysection,prefixsegments=100] \unexpanded\def\startParagraph {\dosingleempty\dostartParagraph} \def\dostartParagraph[#1]% {\getrawparameters[Paragraph][heading=,mark=,#1]% \incrementnumber[ParagraphNumber]% \ininner{\tfx\getnumber[ParagraphNumber]}% \doifsomething\Paragraphheading{\inouter{\Paragraphheading}}% \doifsomething\Paragraphmark{\expanded{\textreference[\Paragraphmark]{\fullheadnumber/\rawnumber[ParagraphNumber]}}}% \ignorespaces} \unexpanded\def\stopParagraph {\blank[medium]} \protect \starttext \chapter{Alter novom} \startParagraph[heading={lorem ipsum},mark=test] \input tufte \stopParagraph \startParagraph \input tufte \stopParagraph \startParagraph Should be 1/1: \in[test] \stopParagraph \stoptext ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] bug? margens with duplex
Hi Hans, > I uploaded a beta that might do a better job but as well could > introduce other problems, so testing is needed. Thanks a lot! Started testing it and all margins look fine now :-) - also in larger docs. Will continue testing... P. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] bug? margens with duplex
Hi, I am using \ininner and \inouter to set text into the margins. As soon I also use duplex the margins are messed up at every second page. Unluckily the [stack=continue] option does not help. I put an example incl. pictures of the results on my user talk page on the wiki: http://wiki.contextgarden.net/User_talk:Tralalas That way my problem might be easier to understand. Any help is welcome as this problem became a major issue for me. Thanks P. (this is a follow up of the discussion: "empty lines messing with margins (in duplex mode)" from end of last year) mtx-context | current version: 2012.04.26 22:27 ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] General suggestion: Unit tests for ConText
Hi, during my work with context I wrote a bunch of fewliners mainly to test how to do things. When there change from mkii to mkiv occured many of my mini-tests failed and later with the growing of mkiv restartet to work - some just without adaption.. some with some adjustment to a new syntax. I realize that they have the same functionality like unit-tests - just instead of comparing classes and variables - a pdf-output is visually compared. So I like to suggest to introduce unit tests for context. It would a) increase the quality of context as it makes the testing easier for the developer b) it also would be a great source of minihowtos for learning context. Before I write my technical ideas about this I would like to know what are you thinking about this idea? ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] math-align / subformulas not working
Hi, I just tried an example from math-ali.mkiv: \starttext \placeformula \startformula \startalign \NC a \NC \eq b \NR[+] \NC c \NC \neq d \NR \NC \NC \neq f \NR[+] \NC \NC \geq g \NR[+][a] \NC \NC \leq h \NR[+][b] \NC \NC \eq i \NR \stopalign \stopformula \stoptext But the subformula ...[+][a] and ...[+][b] are not shown as expected... they are shown as normal formula numbers - but they should be subformula numbers. Is there a new way to create subformulas? P. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] inner/outer margin: wrong width at double sided
Hi, sorry that I repeat my question but I have really no idea how to solve this. When I use \ininner and \inouter directly, always the correct width is used. \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte But as soon I put it into a function the wrong margin width is often used. \unexpanded\def\startParagraph {\dosingleempty\dostartParagraph} \def\dostartParagraph[#1]% {\getrawparameters[Paragraph][heading=,mark=,#1]% \incrementnumber[ParagraphNumber]% \ininner{\tfx\getnumber[ParagraphNumber]}% \doifsomething\Paragraphheading{\inouter{\Paragraphheading}}% \doifsomething\Paragraphmark{\expanded{\textreference[\Paragraphmark]{\fullheadnumber/\rawnumber[ParagraphNumber]}}}% \ignorespaces} \unexpanded\def\stopParagraph {\blank[medium]} \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph In the attached pdf file in the thread-starting post you can see the broken results on page 6. -8< % define start- stopParagraph \definenumber[ParagraphNumber][way=bysection,prefixsegments=100] \unexpanded\def\startParagraph {\dosingleempty\dostartParagraph} \def\dostartParagraph[#1]% {\getrawparameters[Paragraph][heading=,mark=,#1]% \incrementnumber[ParagraphNumber]% \ininner{\tfx\getnumber[ParagraphNumber]}% \doifsomething\Paragraphheading{\inouter{\Paragraphheading}}% \doifsomething\Paragraphmark{\expanded{\textreference[\Paragraphmark]{\fullheadnumber/\rawnumber[ParagraphNumber]}}}% \ignorespaces} \unexpanded\def\stopParagraph {\blank[medium]} % Setup margins and double sided \definelayout[WithMarginnotes][location={duplex},grid=no,topspace=3cm,height=24cm,backspace=3cm,cutspace=0cm,leftmargin=1cm,leftmargindistance=0.4cm,width=12.1cm,rightmargindistance=0.4cm,rightmargin=3.5cm] \setuplayout[WithMarginnotes] \setuppagenumbering[alternative=doublesided,location=] \showframe % \starttext % direct use: works \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte % used via fucntion: does not work correctly \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \stoptext ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] right and left alignment in header w/ linebreak sign
Hi, I am trying to have the header text aligned at the outer border of margin. At the moment I have \setupheadertexts[margin][][\rightaligned{\CurrentChapter}][\leftaligned{\CurrentChapter}][] and in the text \chapter{A very, very long long heading} and it works like I expect it. But as soon I have a linebreak in the heading (via \\) I get following error message: structure > sectioning > chapter @ level 2 : 0.1 -> A very,\\very long long title ! Extra }, or forgotten \endgroup. system > tex > error on line 1 in file context-test-struktur3.tex: Extra }, or forgotten ... As soon I remove the alignment in the header also the chapter with the linebreak sign works - but of course I get then a wrong alignment. How can I make that the header works with the correct alignment and linebreaks in the heading? (header should be still without linebreaks) Thanks in advance! Complete example: -8< % define margins \definelayout[WithMarginnotes][location={duplex},grid=no,topspace=3cm,height=24cm,backspace=3cm,cutspace=0cm,leftmargin=1cm,leftmargindistance=0.4cm,width=12.1cm,rightmargindistance=0.4cm,rightmargin=3.5cm] \setuplayout[WithMarginnotes] \setuppagenumbering[alternative=doublesided,location=] \showframe % define header \define\CurrentChapter% {\doiftextelse {\getmarking[chapternumber]}% {\getmarking[chapternumber].~\getmarking[chapter]}% {\getmarking[chapter]}% } \setupheadertexts[margin][][\rightaligned{\CurrentChapter}][\leftaligned{\CurrentChapter}][]% % \starttext \completecontent[criterium=all] \chapter{A very,\\very long long heading} \chapter{A very, very long long heading} \chapter{End} \stoptext ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] Heading with linebreaks in pdf bookmarks: linebreak sign stays
Hi, as soon I have a linebreak inside a heading via \\ I get this \\ also in the text of that heading in the pdf-bookmarks: \setupinteraction[state=start] \placebookmarks[chapter,section,subsection][chapter,section] \starttext \completecontent[criterium=all] \chapter{A very,\\very long long title} \chapter{A very, very long long title} \stoptext What did I forgot to get rid of the linebreak sign in the pdf bookmarks? ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] inner/outer margin: confused width
Hi, the width of my inner and outer margin are different and the pagelayout is double sided. When I use \ininner and \inouter directly, always the correct width is used. But as soon I put it into a function the wrong margin width is often used. I attached two files: - simple example tex file - the pdf output of that example file In the example pdf you can see starting from page five the mixed up result. Is there something I do wrong with the double sided mode? Or is this an issue how the function is written? Thanks in advance! P.%Test of margins and margins width %Define paragraph command \definenumber[ParagraphNumber][way=bysection,prefixsegments=100] \unexpanded\def\startParagraph {\dosingleempty\dostartParagraph} \def\dostartParagraph[#1]% {\getrawparameters[Paragraph][heading=,mark=,#1]% \incrementnumber[ParagraphNumber]% \ininner{\tfx\getnumber[ParagraphNumber]}% \doifsomething\Paragraphheading{\inouter{\Paragraphheading}}% \doifsomething\Paragraphmark{\expanded{\textreference[\Paragraphmark]{\fullheadnumber/\rawnumber[ParagraphNumber]}}}% \ignorespaces} \unexpanded\def\stopParagraph {\blank[medium]} % Setup margins and double sided \definelayout[WithMarginnotes][location={duplex},grid=no,topspace=3cm,height=24cm,backspace=3cm,cutspace=0cm,leftmargin=1cm,leftmargindistance=0.4cm,width=12.1cm,rightmargindistance=0.4cm,rightmargin=3.5cm] \setuplayout[WithMarginnotes] \setuppagenumbering[alternative=doublesided,location=] \showframe % Test content \starttext \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte \ininner{X X X X X X X X X X X X}\inouter{M M M M M M M M M M M M }\input tufte \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \startParagraph[heading={M M M M M M M M M M M M }] \input tufte \stopParagraph \stoptext pararef-test5.pdf Description: Adobe PDF document ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] fullstructureheadnumber does not work
Hi, did something happend to the \fullstructureheadnumber in the last six months? I still can find it in the source (strc-sec.mkiv) but is always halts with "Undefined control sequence". Is there a new command for this? Thanks P. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] for each script a different font
Hi all, is it possible to mix severel fonts (for each script one font)? Regarding to some fragments of the wiki I tried: \setupdirections[bidi=global] \definefontfeature[cyrl][script=cyrl] \definefontfeature[brai][script=brai] \definefontfeature[arab][script=arab] \starttypescript [serif] [vollkorn] \definefontsynonym [Serif][name:vollkornregular] \definefontsynonym [Serif][name:doulossil][feature=cyrl] \definefontsynonym [Serif][name:scheherazade][feature=arab] \defomefpmtsynonym [Serif][name:sechspunktbraille][feature=brai] \stoptypescript \definetypeface[fliesstext][rm][serif][vollkorn] \setupbodyfont[fliesstext,rm,11pt] \starttext Regular Еупгдфк цшкв уы more test text a ُءشةحمث and continue latin script ⠇⠤⠧⠬⠀⠟⠢⠭. \stoptext But the last \definefontsynonym overrides the entire unicode space and not only the part regarding to the related script. Is the mechanism I tried in ConTeXt possible? ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] bug report/mkiv: verbatim text bug with tab parameter
Hi, today I recognized that the tab parameter is not working in setuptyping anymore (actual beta). As soon the tab paramter is set and a tabulator is used in the text, ConTeXt breaks with following error message: ! LuaTeX error ...text/tex/texmf-context/tex/context/base/util- str.lua:56: attempt to call global 'rep' (a nil value) stack traceback: ...text/tex/texmf-context/tex/context/base/util- str.lua:56: in function 'tabtospace' ...text/tex/texmf-context/tex/context/base/buff- ini.lua:174: in function 'flush' ...text/tex/texmf-context/tex/context/base/buff- ini.lua:216: in function 'typebuffer' :1: in main chunk. \dodotypeblockverbatim ...ter \c!escape \!!es , }} \dostoptagged\endofverbat... l.7 \stopcode To reconsturct the error use following example: \definetyping[code][tab=3] \starttext \startcode \stopcode \stoptext If this is just a mistake by myself please excuse. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] margin-bug in mkiv?
Hi, since mkiv (last updated 19.11.) \placeformua causes a bug regarding the placing of inner- and outermargins. If you remove the \placeformula in the following example the placing of inner- and outermargins is right. But as soon there is a \placeformula from that point on inner- and outermargins are switched every call. Is there a way around this problem or is someone able to correct this? I would apreciate any help in this. \starttext \inmargin{inmargin}\inothermargin{othermargin}\input tufte \inmargin{inmargin}\inothermargin{othermargin}\input tufte \placeformula \startformula c^2 = a^2 + b^2 \stopformula \inmargin{inmargin}\inothermargin{othermargin}\input tufte \inmargin{inmargin}\inothermargin{othermargin}\input tufte \inmargin{inmargin}\inothermargin{othermargin}\input tufte \inmargin{inmargin}\inothermargin{othermargin}\input tufte \inmargin{inmargin}\inothermargin{othermargin}\input tufte \stoptext ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] formula: placeformula messes with margins
Hi, I also ran into a problem with placeformula and margins. The attached example runs fine with the margins. But as soon the placeformula is uncommented the left and right margins are messed up. And if not all paragraphs have at both side a marginnote is get worse. Is there a way to solve this? Thanks 8<--- \starttext \inmargin{inmargin}\inothermargin{othermargin}\input tufte \inmargin{inmargin}\inothermargin{othermargin}\input tufte %\placeformula \startformula c^2 = a^2 + b^2 \stopformula \inmargin{inmargin}\inothermargin{othermargin}\input tufte \inmargin{inmargin}\inothermargin{othermargin}\input tufte \inmargin{inmargin}\inothermargin{othermargin}\input tufte \inmargin{inmargin}\inothermargin{othermargin}\input tufte \inmargin{inmargin}\inothermargin{othermargin}\input tufte \stoptext ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] formula: listing and subnumbering
Hans Hagen wrote: > - can you post your examples (so that they can be added to the test suite) > - can you also test this with the current beta done.. you can find the test file for formulas with mkiv attached to this email. I ran it with the latest beta. A couple of things are working.. but e.g. most ways for subformulas not. The listing is half working.. only the formulas names are missing and the order with the only example with working subformulas is strange. If I made any mkiv mistake please excuse... I tried to figure out / guessed the right mkiv ways. I hope this test files helps you to identify the problem areas. -8<--- \starttext \title{List of formulas} Strange: Missing name of first formula and strange order of .. 2.a, 2, 2.b... \placelist[formula][criterium=all,alternative=c] \subject{math - formula} This works fine. \placenamedformula[one]{Der einfache Test} \startformula c^2 = a^2 + b^2. \stopformula \subject{math - subformula} This works fine. \startsubformulas[eq:1] \placeformula[eq:first] \startformula PM \xrightarrow R_{PM} \xrightarrow PM \stopformula \placeformula[eq:second] \startformula R_{PM} = \{ K, F, Z, U, I, J\} \stopformula \stopsubformulas \subject{math - align - formula} Works. \placeformula \startformula \startalign[n=3, align={right,middle,left}] \NC PM \xrightarrow \NC R_{PM} \NC \xrightarrow PM \NR[gleichung1a] \NC R_{PM} \NC = \NC \{ A, B, C, D, E\} \NR[gleichung1b] \stopalign \stopformula Also works. \placeformula \startformula \startalign[n=3, align={right,middle,left}] \NC PM \xrightarrow \NC R_{PM} \NC \xrightarrow PM \NR[+] \NC R_{PM} \NC = \NC \{ A, B, C, D, E\} \NR[+] \stopalign \stopformula \subject{math - align - subformula} Does not work: no subformula numbers \placesubformula \startformula \startalign[n=3, align={right,middle,left}] \NC PM \xrightarrow \NC R_{PM} \NC \xrightarrow PM \NR[gleichung1a][.1] \NC R_{PM} \NC = \NC \{ A, B, C, D, E\} \NR[gleichung1b][.2] \stopalign \stopformula Does not work: no subformula numbers \placesubformula \startformula \startalign[n=3, align={right,middle,left}] \NC PM \xrightarrow \NC R_{PM} \NC \xrightarrow PM \NR[gleichung1a][+] \NC R_{PM} \NC = \NC \{ A, B, C, D, E\} \NR[gleichung1b][+] \stopalign \stopformula \subject{math - eqalignno - formula} Taken from wiki and removed the subformulanumber \placeformula \startformula \eqalignno{ c^2 &= a^2 + b^2 &\formulanumber \cr c &= \left(a^2 + b^2\right)^{\vfrac{1}{2}} &\formulanumber\cr a^2 + b^2 &= c^2 &\formulanumber \cr d^2 &= e^2&\formulanumber \cr} \stopformula \subject{math - eqalignno - subformula} Directly taken form wiki - does not work: subformulanumber is unknown. %\placeformula %\startformula %\eqalignno{ % c^2 &= a^2 + b^2 &\formulanumber{a} \cr % c &= \left(a^2 + b^2\right)^{\vfrac{1}{2}} &\subformulanumber{b}\cr % a^2 + b^2 &= c^2 &\subformulanumber{c} \cr % d^2 &= e^2&\formulanumber\cr} %\stopformula \stoptext ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] Fonts
I have to agree to Andreas... i just updated to the actual beta (for the math examples). Now mtxrun answers with following statement: ...text/tex/texmf-context/tex/context/base/font-otp.lua:512: attempt to call field 'register' (a nil value) ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] Fonts
You can list all local availble fonts with: mtxrun --script fonts --list --all More details under: http://wiki.contextgarden.net/Fonts_in_LuaTeX Cecil Westerhof wrote: > Is there a list of the standard fonts to use? I found: > serif > regular > roman > sans > support > sansserif > mono > type > teletype > handwritten > cmr > mm > rm > > But none of them I find very pleasing. (And handwritten looks > different as the name suggest.) How can I find out which fonts I can > use? > ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] formula: listing and subnumbering
> Hans Hagen wrote: > i'll have a look at it Did you found anything? I tried to figure out which command in the examples of the wiki work/dont work (I used mkiv stable). So far: \formulanumber -> works in mkii and mkiv \subformulanumber -> works only in mkii \placenamedsubformula -> works only in mkii \placesubformula & \NR[+] -> mkii & mkiv, but (1.name) as number \placeformula & \NR[+] -> works in mkii and mkiv, but (1.name) as number I have a real problem to transform my formula from mkii to mkiv. In mkii I had following: \placesubformulawithnumber[gleichung1] \startformula \startalign[n=3, align={right,middle,left}] \NC PM \xrightarrow{aaa} \NC R_{PM} \NC \xrightarrow{bbb} PM \NR[gleichung1a][.1] \NC R_{PM} \NC = \NC \{ K, F \} \NR[gleichung1b][.2] \stopalign \stopformula Can anyone help me to transform this to mkiv, please? Thanks P. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] formla: listing and subnumbering
Hi, in my work I have a lot of formulas inkl. subformulas. Doing the examples at the wiki two questions came up: a) how to generate a table of formulas? b) what is the right/better way for subnumbering? a) I tried the example for generating a table of formulas from the wiki (http://wiki.contextgarden.net/Math/Display#List_of_Formulas) but instead of a list I get in the pdf a »no list method«. What do I missed here? b) I found two descriped ways how to create formula (sub-)numbering: 1) using \formulanumber and \subformulanumber (third example from http://wiki.contextgarden.net/Math/Display#The_Manual_Method). But context always reports here: ! Undefined control sequence. ...^{\vfrac {1}{2}} &\subformulanumber {b}\cr a^2 + b^2 &= c^2 &\... 2) using the \NR[..] like it is described on http://wiki.contextgarden.net/Multiline_equations#Working_with_equation_numbering and http://dl.contextgarden.net/myway/mathalign.pdf. This way compiles through. But which way is the future context way? In which way can I combine subnumbering and including to list some (not all) subformulas? Thanks for your help ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] ConTeXt Minimals and TEXMFCACHE
I summarized this small discussion in the wiki as I also made a systemwide installation (http://wiki.contextgarden.net/ConTeXt_Minimals#Cache) Nicola wrote: > In article > , > Mojca Miklavec wrote: > >> The variable TEXMFCACHE is set in >> tex/texmf/web2c/texmfcnf.lua >> and that one should do the job. Under usual circumstances at least. >> >> If that one is not being respected, something might be wrong. Do you >> have any other texmfcnf.lua file somewhere else? > > No, I export TEXMFCACHE in my .profile, because I want the cache to be > inside my home folder. After running setuptex, ConTeXt minimals uses > that rather than the path specified in texmfcnf.lua. Since now I know > that luatex-cache can be shared, for me this is perfectly fine. I just > had to adjust the TeXShop engines (I am on Mac OS X) by explicitly > setting TEXMFCACHE for XeTeX and MKII, besides MKIV. > > So, if I get it right, the value in texmfcnf.lua is used unless > TEXMFCACHE is set. > > Nicola > > ___ > If your question is of interest to others as well, please add an entry to > the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___ ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] Porting from MkII to MkIV
I used the context from the ubuntu repository. So I switched to context- minimals current-version and viola it works here too Thanks Wolfgang Schuster wrote: > Am 25.08.10 00:23, schrieb Peter Schorsch: >> Thanks Wolfgang! Your source code looks a lot different than mine... >> there are some commands I have not seen before... so I have to learn :-) > > Works here without problems. > > MTXrun | current version: 2010.08.25 11:13 > > Wolfgang > > ___ > If your question is of interest to others as well, please add an entry to > the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___ ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] Porting from MkII to MkIV
Thanks Wolfgang! Your source code looks a lot different than mine... there are some commands I have not seen before... so I have to learn :-) Unluckily I still get an error message: ! Use of \startPARA doesn't match its definition. l.21 \startPARA[ heading={lorem ipsum},mark=test] What did I wrong? 8<-- \definenumber[PARANUMBER][way=bysection,prefixsegments=100] \unexpanded\def\startPARA {\dosingleempty\dostartPARA} \def\dostartPARA[#1]% {\getrawparameters[PARA][heading=,mark=,#1]% \incrementnumber[PARANUMBER]% \inothermargin{\tfx\getnumber[PARANUMBER]~}% \doifsomething\PARAheading{\inmargin{\PARAheading}}% \doifsomething\PARAmark {\textreference[\PARAmark]{XXX/\rawnumber[PARANUMBER]}}% \ignorespaces} \unexpanded\def\stopPARA {\blank[medium]} \starttext \chapter{Alter novom} \startPARA[heading={lorem ipsum},mark=test] Lorem ipsum ... \stopPARA \startPARA Lorem ipsum \in[test] \stopPARA \stoptext ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] Porting from MkII to MkIV
Hi, I started to write under MkII a module to number and reference each paragraph. I got it to work but it was not well done. Now I want to finish and clean it to upload it on contextgarden for all. But I am stucking at the port to MkIV. (Reduced MkII Version): \definenumber[paraNumber] \setuphead[chapter,section,subsection,subsubsection] [after={\resetnumber[paraNumber]}] \def\StartPara[#1]% {\getparameters[tmp][heading=,mark=,#1]% \incrementnumber[paraNumber]% \inothermargin{\tfx\getnumber[paraNumber]~}% \doifnot{\tmpheading}{}{\inmargin{\tmpheading}}% \doifnot{\tmpmark}{}{\expanded{\textreference[\tmpmark]{XXX /\getnumber[paraNumber]}}}% } \def\StopPara% {\blank[medium]} \starttext \chapter{Alter novom} \StartPara[heading={lorem ipsum},mark=test] Lorem ipsum ... \StopPara \StartPara Lorem ipsum \in[test] \StopPara \stoptext XXX stands for an already ported part that works. I have two problems I do not know how to solve: - the line starting with inothermargin gives back in mkii always the correct number form: n (always latin numbers). In mkiv it gives back m.n. Also in mkiv: inside bodymatter the numbers are latin number e.g. 1.2 and inside appendecies latin letters and numbers, e.g. A.II. What needs to be change in my module to get the old mkii behavior back? - There must be a problem in the last line: as soon I use my mark option I get following error: ! Use of \dovspacingyes doesn't match its definition. \doifnextoptionalelse ...\nextoptionalcommandyes { #1}\def \nextoptionalcomma... ...ference [\tmpmark ]{XXX /\getnumber [paraNumber]} \expanded ...\long \xdef \@@expanded {\noexpand #1 }\@@expanded l.18 \StartPara[mark=test] Does anyone know how to solve/port this to mkiv? Thanks for your help ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] current head title and current number
I figured out that \fullstructureheadnumber returns inside a backmatter nil. So it works for my own needs. I do not know if the reported return behavior inside a bodymatter or appendices is correct. But I leave this discussion to the context devs. Anyways @devs: Thanks for your work! Context became real cool stuff! ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] current head title and current number
Thanks Wolfgang, that helped :-) Only one additional question occured with that solution: I am trying to use unnumbered chapters/sections and recognized that \fullstructureheadnumber gives the number of the chapter/section before instead of giving back and empty string: \chapter{abc} >> \fullstructureheadnumber -> 1 \chapter{abc} >> \fullstructureheadnumber -> 2 \title{abc} >> \fullstructureheadnumber -> 2 (instead of an empty string) \chapter{abc} >> \fullstructureheadnumber -> 3 (\placeheadnumber only returns (chapter and title) an empty string) Is there a way to solve this? ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] current head title and current number
Hi, I need to get the current *section/chapter title and number. I figured out that \fullstructureheadnumber gives the current number. But I can not figure out what gives the current head title. In strc-sec.mkiv I found this comment: \def\currentheadtext{obsolete, use marks} Is this a hint to use getmarking? I tried \getmarking[current] \getmarking[currentsection] \getmarking[currenthead] without success. Does anyone know how to access the current title? ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] Typeface - simple example
Hi, finally I figured it out :-) I entered the working example into the wiki: http://wiki.contextgarden.net/Simple_Typescript_Example and linked it into the catogory »Fonts« and at the page »Fonts in LuaTeX« under »2.2.3 Very simple example of typescript«. You know the best where to link it inside your wiki so feel free to change it if you think. Maybe the title also should be changed into »Simple Typescript / Typeface Example«. Hope it will helps other. Ciao ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] Ubuntu and Context MKIV
Hi, I am also using Context on ubuntu - and it works fine here. There is one small change I like to do: luatools --generate is creating ~/luatex-cache. As this cache is not hidden it appears on the desktop. Is it possible to change that directory into a hidden directory e.g. ~/.luatex-cache? Thanks ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] Typeface - simple example
Hi, I reactivated my interest in Context. A lot changed since then... so I am became a beginner again. E.g. I don't know / understand how to use that Typescript-Framework. I tried to build a simple example, but I do not get it to work. I crosschecked successfully with simplefonts that the fonts itself are working (via \simplefont[..]). In this example I wanted to put the Nimbus Sans fonts on the rm-Definitions (just to see that it is working). I like what I was reading in the wiki, examples, posts and manuels about the Typescript-framework - but can anyone help me to understand it really / help me to get this simple example to work? Thanks -- simple example environment --- Nimbus fonts are stored under /usr/share/fonts OSFONTDIR is correct, fonts via mtxrun imported mtxrun --script fonts --list --all pattern=nimbuss* shows all the nimbus fonts I used in the example -- simple example -- \enableregime[utf] \setupencoding[default=uc] \setupcapitals[sc=yes] \definefontsynonym [Nimbus-Sans-Regular][nimbussanlregu] \definefontsynonym [Nimbus-Sans-Bold] [nimbussanlbold] \definefontsynonym [Nimbus-Sans-Italic] [nimbussanlreguital] \definefontsynonym [Nimbus-Sans-Slanted][nimbussanlreguital] \definefontsynonym [Nimbus-Sans-BoldItalic] [nimbussanlboldital] \definefontsynonym [Nimbus-Sans-BoldSlanted][nimbussanlboldital] \definefontsynonym [Nimbus-Sans-Caps] [nimbussanlregu] \starttypescript [Nimbus] \definetypeface [Nimbus-whatIsThisFor] [rm][whatIsThis] [Nimbus-Sans-Regular] \definetypeface [Nimbus-whatIsThisFor] [rm][whatIsThis] [Nimbus-Sans-Bold] %here: how to access / define rm,bf? \definetypeface [Nimbus-whatIsThisFor] [tt][whatIsThis] [Nimbus-Sans-Italic] \definetypeface [Nimbus-whatIsThisFor] [ss][whatIsThis] [Nimbus-Sans-Bold] \stoptypescript \usetypescript[Nimbus] \setupbodyfont[Nimbus-whatIsThisFor,rm,12pt] \starttext Regular {\it Italic} {\bf Bold} {\bi Bold-Italic} \showbodyfont \stoptext ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] Pagenumbering in header-margin with outer-align
Hi, I am trying to put the pagenumber in the margin of the header. But I also want it outer-aligned - not inner-aligned, which seems to be the standart alignment of margin. But the inner-align of the body-margin should still be inner-aligned. So I tried following: \setuppagenumbering[conversion=Romannumerals,alternative=doublesided, location={header,margin},style={\setupalign[outer]}] but Context dont like this.. it stops converting. Does anyone know a working solution for this problem? Thanks, P. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] inline-graphics and unwanted line-break
Hi, I have a small metapost graphic I like to use inline. But the arragement behaves a little bit "unpractically". As soon there is no character in front of the graphic context will break the line after the graphic - but as soon there is a character in front of the graphic, context does not adding a linebreak after the graphic. Does anyone know how to prevent the line-break after the graphic if the graphic is the first inline? Thanks, P. example-file: \startuseMPgraphic{zo} color schwarz ; schwarz := (.0,.0,.0) ; draw (0pt,0pt)--(0pt,8pt)--(5pt,12pt)--(10pt,8pt)--(10pt,0pt)--(0pt,0pt)--cycle withcolor schwarz ; \stopuseMPgraphic \starttext \hbox{\useMPgraphic{zo}} test text - why a line-break? How to prevent this? a \hbox{\useMPgraphic{zo}} test text - this is fine: no line-break! \stoptext ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] combination with an additional line centered in a placefigure?
> \placefigure > [force][fig:xy] > {captiontext} > {\placelegend > {\startcombination[2*1] > {\externalfigure[xxx]}{} > {\externalfigure[yyy]}{} > \stopcombination} > {Quelle: XY}} Thanks, both solutions work. Is there something simelar for placelegend in splitfloat? \splitfloat {\placetable[][]{tablecaptiontext}} {very very long HTML-Table} I need to add a legend - also as a HTML-Table, so I tried: \splitfloat {\placetable[][]{tablecaptiontext}} {\placelegend {very very long HTML-Table} {legend HTML-Table}} But this is not working - strangly an Missing-} error comes up but all brakets are closed. Is there any other way to put a legend at the end of a multi-page HTML-Table? Ciao, P. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] combination with an additional line centered in a placefigure?
Hi, as soon I enter the cbox-line the combination is not longer centered. I tried to embed the combination in a cbox, but that had no effect. Has anyone a hint how to center the combination successfullly? \starttext \placefigure [force][fig:xy] {captiontext} {\startcombination[2*1] {\externalfigure[xxx][]}{} {\externalfigure[yyy][]}{} \stopcombination \cbox{\tfx Quelle: XY} } \stoptext Thanks, P. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] currentheadnumber / doif.. problem
ok, I found the solution. In the documentation (cont-eni.pdf) at page 172 following is written: For example: \currentheadnumber : 8.3 \headnumber[chapter] : 8 \headnumber[section] : 8.3 but that is partly wrong. There should be standing (change example from 8.3 to 8.3.2): For example: \finalsectionnumber : 8.3.2 \currentheadnumber : 2 \headnumber[chapter] : 8 \headnumber[section] : 8.3 Or are \finalsectionnumber and \currentheadnumber interchanged in the code and the documentation is as it should be? But that is a question I cannot answer. Ciao, P. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] currentheadnumber / doif.. problem
Aditya wrote: > Can you create a minimum example to play with? I attached the module t-pararef.tex and the example pararef-test.tex. The ref1 is still wrong. When I replace \currentheadnumber in \paragraphMark with the before defined \presentheadnumber context is saying that a «Missing control sequence inserted» - but I don't see any mistake there (but there must be)... But finally I only want that the ref1 in the example is also working (see at the end of example file). A second questions: why is the paragraph of ref3 in the example indented? Thanks, P. \usemodule[pararef] \starttext \chapter{first heading} \section{hamha} \startparagraph\paragraphMark[ref1]\paragraphHeading{tztzttzt} blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla \stopparagraph \startparagraph blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla \stopparagraph \section[ref2]{dumdidim} \startparagraph blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla \stopparagraph \chapter{first heading} \startparagraph blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla \stopparagraph \startparagraph\paragraphHeading{heuho} blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla \stopparagraph \startparagraph\paragraphMark[ref3] blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla \stopparagraph ref1 should be: para. 1.1/2 and is: \crossref{para.}[ref1] ref2 should be: sec. 1.2 and is: \crossref{sec.}[ref2] ref3 should be: para. 2/3 and is: \crossref{para.}[ref3] \stoptext \startmodule[pararef] \unprotect % variable and functions % % paragraphNumber running number starts at every heading with 1 % % paragraphMark[] Marks the paragraph to make references to it % tmpparagraphMark{}[] replaces temporary paragraphMark until %presentheadnumber is working % getParagraphNumber Writes paragraphNumber (for itmize-enviorement % startParagraph Starts and stops a paragraph % stopParagraph % paragraphHeading{} Defines the margin-heading of that paragraph % crossref{}[] common command for internal references \definenumber[paragraphNumber] \setuphead[chapter,section,subsection,subsubsection][after={\resetnumber[paragraphNumber]}] \def\presentheadnumber {\doifelse{\headnumber[section]}{0}% {\headnumber[chapter]}% {\headnumber[section]}% } \def\paragraphMark[#1] {\expanded{\textreference[#1]{\presentheadnumber/\getnumber[paragraphNumber]}}} \define\getParagraphNumber {\incrementnumber[paragraphNumber]% \inothermargin{\color[grey]% {\tfx\getnumber[paragraphNumber]~}} } \definestartstop[paragraph] [before= {\blank[medium]\incrementnumber[paragraphNumber]% \inothermargin{\color[grey]% {\tfx\getnumber[paragraphNumber]~}}}, after={\blank[medium]}] \def\paragraphHeading#1% {\inmargin{#1}% } \def\crossref#1[#2]% {\color[grey]{#1 \in[#2]}% } \protect \stopmodule \endinput___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] How to realize rubytext in Context?
Hi, for an multilanguage document I need to write some rubytext. But I have no idea how to realize this in context. Math-mode is not a solution as the line-breaks with longer rubytext - but maybe it is the only way. Hints are very welcome. Here is a good and short explanation what rubytext is: http://www.w3.org/International/questions/qa-ruby Ciao, P. ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] currentheadnumber / doif.. problem
hm.. it still executes always the else-part of the doifelse-function > > (Untested) > > > \def\presentheadnumber% > >{\doifelse{\headnumber[section]}{0}% > > ^^ > > >{\headnumber[chapter]}% > >{\headnumber[section]}% > >} ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] currentheadnumber / doif.. problem
Hi, I tried to get the full present heading-number. If I am using currentnumber the result is only the last part of the heading-number. So I tried do implement a function like this: \def\presentheadnumber% {\doifelse{\headnumber[section]}{}% {\headnumber[chapter]}% {\headnumber[section]}% } but always the else-part is executed. I also tried to use doifemptyelse, doifnumber etc.. but as soon i am using headnumber[...] only the else-part will be executed. Can anyone help me with this problem? Or am I going a complete wrong way? Thanks ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] currentheadnumber / doif.. problem
Hi, I tried to get the full present heading-number. If I am using currentnumber I am getting back only the last part of the heading-number. So I tried do implement a function like this: \def\presentheadnumber% {\doifelse{\headnumber[section]}{}% {\headnumber[chapter]}% {\headnumber[section]}% } but always the else-part is executed. I also tried to use doifemptyelse, doifnumber etc.. but as soon i am using headnumber[...] only the else-part will be executed. Can anyone help me with this problem? Or am I going a complete wrong way? Thanks ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] help needed
>> Started reading the doc on your site, created a myfile.tex as yours, but >> % context myFile >> zsh: command not found: context use instead: texexec --pdf myFile.tex (use pdftex but Unicode is not working) or texexec --xtx myFile.tex (use Xetex with Unicode but is not working in Context-distribution since 2007, download the latest 2006 version from archiv) or texexec --lua myFile.tex (use LuaTex and Unicode but still official beta - have no experience with it) For XeTeX maybe look at: http://archive.contextgarden.net/message/20070130.145856.ffeabcfc.en.html Ciao ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] hairline in a matrix
Hi, I could not figure out how to add a hairline between two rows of a matrix. Following example is compiling but only results in a bigger vertical space. Infos/Hints are welcome... \startformula \startmatrix \NC {a_1 } \NC {a_2 } \NC {a_3 } \NC \ldots \NC {a_X } \NR \NC {b_1 } \NC 0 \NC 0 \NC 0 \NC 0 \NR \NC 0 \NC {b_2 } \NC 0 \NC 0 \NC 0 \NR \NC 0 \NC 0 \NC \ddots \NC 0 \NC 0 \NR \NC[n=5] {\text{\hairline}} \NR \NC 0 \NC 0 \NC 0 \NC {b_{X - 1} } \NC 0 \NR \stopmatrix \stopformula ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] value-copy - e.g. in \textreference
Wolfgang Schuster wrote: > > \def\MyMark[#1]% > {\expanded{\textreference[#1]{Para. \currentheadnumber / > {\getnumber[number]}}} > Thanks, it works with the expanded... ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] how to get a commalist out of {}-brackets
Aditya Mahajan wrote: > > \expanded{\subfunction[\labelembedded]} > Thanks, that was the solution :-) ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] module-parameters Was: Context replacement for bibitem
Hi Aditya, > Aren't you doing exactly what the bib module does? The only difference > is that the bib module uses registers, so that you can also sort the > publication list. And you can format different types of references > differently. But the basic idea is the same. The main issue for me was, that (right now) it seems to be impossible to get with the bib-module a per-chapter bibliography at the end of the document . Ciao ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] module-parameters Was: Context replacement for bibitem
Thanks Wolfgang, you were totally right. I made a typewriting error - I discovered it with help of your examples. I also updated the module in the wiki - and I will make it multilingual as soon I will find a good doc about multilingual-commands. I tried to add colors over module-parameter - but it didn't work out. I changed in t-bibitem.tex: \setupmodule[itemspace=12,color=red] ... \def\bibref[#1]#2{\doifemptyelse{#2} {\color[\currentmoduleparameter{color}]{[\in[#1]]}} {\color[red]{[\in[#1], #2]}}} and in the biblist-test-files only following line has to be added: \setupcolors[state=start] The direct command \color[red]{...} is working, but the \color[\currentmoduleparamter{color}]{...} not - wether I add an \expanded or not. texexec gives following comments: color : empty is not defined I have the feeling that the module-parameter and the expand-commands are still a mysterious to me. Can you / anyone explain me, what I am doing wrong? Ciao ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] how to get a commalist out of {}-brackets
Hi, I need to forward an embedded commalist to an subfunction. The problem: how can I get rid of the {}-brackets to access the embedded commalist? The functions looks like: \def\function#1[#2] {\getparameters[label][a=,b=,embedded=,#2] subfunction[\labelembedded] ...} \def\subfunction#1[#2] {\getparamters[label][a,c,#1] \labela% will answer with emptyness #2 % returns {a=,c=} ... but I need for the getparamteres a=,c= ...} to call the function: \function[a=etwas,b=ddd,embedded={a=nochWas,c=hope}] ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] value-copy - e.g. in \textreference
Hi, during my first tries of context-programming I bounced a couple of times against a problem I am calling myself my value-copy-border. E.g. number is a register/variable that helps numbering some paragraphs. Some of these paragraphs also should be cross-linked. But the pointer gets always the value, number has at the point of the pointer - and not at the point of the marked paragraph. How can I get just the value of a variable? - like currentsection in the example: \definenumber[number] \setuphead[chapter,section,subsection,subsubsection [after={\resetnumber[number]}] \def\MyMark[#1] {\textreference[#1]{Para. \currentheadnumber / \getnumber[number]}} \definestartstop[MyPara] [before= {\blank[medium]\incrementnumber[number]% \inothermargin{\getnumber[number]~}}, after={\blank[medium]}] \starttext \section \startMyPara blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla \stopMyPara \subsection \startMyPara blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla \stopMyPara \startMyPara\MyMark[testmark] blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla blabla \stopMyPara \section The Link should be [Abs. 1.1/2] but is \in[testmark] %unluckily it is [Abs. 1.1/0] \stoptext ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] Context replacement for bibitem
Hi Wolfgang, > Replace this line with > > \expanded{\setupitemgroup[bibliography][1][n, \currentmoduleparameter{itemspace}*broad]} Unluckily that is not working :-( I also tried: \setupitemgroup[bibliography][1][n \expanded{\currentmoduleparameter{itemspace}}*broad] and \setupitemgroup[bibliography][1][n \expandafter\currentmoduleparameter{itemspace}*broad] In all three tries I didn't got any error-break but the pdf showed directly that the lines were not accepted. I posted the right-this-state module into the wiki: http://wiki.contextgarden.net/Simple_Bibliography The mulilingual-interface I will try later.. but right now I am stocked with this and the other listed points :-( I would be more than happy for any further hint :-) ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] Context replacement for bibitem
Hi, first thanks for your help. I got it working at the basic-level. I put it into a module for the case that other beginner looking for the bibitem-replacement. But two questions are left before I think, that the module could be uploaded to the wiki: - how to make the 12*broad flexible? \currentmoduleparamter{itemspace}*broad is not working :-( - how to make that the \item are right-aligned? itemalign=right is also not working Here is the module-code followed by an appliance-example: ---the module: \startmodule[biblist] \unprotect %\setupmodule[itemspace=12] \defineitemgroup[bibliography] \setupitemgroup[bibliography][levels=1,left={[},right={]},stopper=] \setupitemgroup[bibliography][1][n,12*broad] %\setupitemgroup[bibliography][1][n \currentmoduleparameter{itemspace}*broad] \def\bibitem[#1]#2{\doifemptyelse{#2} {\item[#1]} {\sym{\cap{#2}}\textreference[#1]{\cap{#2 \def\bibref[#1]#2{\doifemptyelse{#2} {[\in[#1]]} {[\in[#1], #2]}} \protect \stopmodule \endinput ---how to use: \usemodule[biblist] \starttext \section{hamha} asdfklsj fk~\bibref[keykeykey]{} \section{dumdidim} asdfsaff alfs hfdsj~\bibref[aha]{Abs. 4.1/1} \subject{Bibliography} \subsubject{hamha} \startbibliography \bibitem[keykeykey]{Der Schlüssel} erstes \stopbibliography \subsubject{dumdidim} \startbibliography[continue] \bibitem[aha]{} zweites \stopbibliography \stoptext ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] Context replacement for bibitem
Hi, I have done a little with Context but I am still a beginner. As I can read in the archive of this list, there is no possibility to divide the bibliography into sections by the generated bibliography. If this assumption is true, I would like to enter the bibitems into the normal .tex-file. I was also reading the doc of the context-bib-module but I couldn't find any context-replacement for \bibitem. Headings inside the bibliography are very important for my text and the advantages of bibitem would simplify my data-entering, so I would be happy for any hint/help how to realize this in Context. I don't want to go back to Latex but to declare my problem better: In Latex a simplified example looks like: \begin{document} \section{hamha} asdfklsj fk\cite{key-1} \section{dumdidim} asdfsaff alfs hfdsj\cite{key-2} \begin{thebibliography}{1} \subsection*{hamha} \bibitem{key-1}erstes \subsection*{dumdidim} \bibitem{key-2}zweites \end{thebibliography} \end{document} ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___