Dear all,
Last september, I asked about how to change the label text of figures
and of tables in my own language.
At that time, Wolfgang suggested me to make lang-kor.tex like lang-
chi.tex.
Yesterday, I made lang-kor.tex and test it. But it is not working.
I got the following error message
Dear Mojca and Wolfgang,
Thank you for the comments on lang-kor.tex.
I didn't test, but I would say: forget the dirty hacks and simply
write
\setuplabeltext [\s!ko] [\v!figure=??]
It might not work in pdfTeX, but for XeTeX and LuaTeX it should do
the job. Once you do those changes, f
Dear Mojca,
On Dec 8, 2007, at 3:35 AM, [EMAIL PROTECTED] wrote:
>> Yesterday, after I reinstalled TeXlive and updated ConTeXt, I got
>> "kpathsea:
>> Running mktextfm lmtypewriter10-regular " message. As a temporary
>> method, I
>> renamed mktextfm.
>
> Just change
>MKTEXTFM = 0
> in t
I am sorry that there is a mistake in the previous mail that I sent.
On Dec 11, 2007, at 9:51 AM, Jeong Dalyoung wrote:
> methods give me more choices.
> Then the \completecontent and \completeindex follows the above setup
> of chapters.
>
> My question was how to make the head title setup of co
Dear all,
I tried to compile s-pre-61.tex to see the interaction.
At the first time, I got the font error. It had a problem to use
Optima-nova font.
I changed the bodyfont to pagella in type-gyr.tex file and tried again.
It runs without the error, but it didn't make pdf output. I checked
the
loadluac...
l.168 \registerctxluafile{luat-env}{1.001}
?
Since I updated the ConTeXt file in the folder texmf-local, but I
don'tknow why it is looking for files under texmf-dist.
Is there anything wrong in my setup?
Thank you for reading.
best regards,
Dalyoung Jeong
een '/texlive/2007/../texmf-
local/' and '/texlive/texmf-local/'.
Thank you for your concern again.
Best regards,
Dalyoung Jeong
___
If your question is of interest to others as well, please ad
Xt, it runs with the command
"texexec --once --pdf ...".
Is there any way to change it to "texmfstart texexec ..."?
Thank you.
Dalyoung Jeong
___
If your question is of interest to others as well, p
If so, how to apply environment .luatex to global
condition? Otherwise, what are wrong in my setup?
Thank you.
Best regards,
Dalyoung Jeong
___
If your question is of interest to others as well, please add an entr
-verbose --compile ..." whenever I start computer? Or, I missed
something in my setup.
Thank you again.
Best regards,
Dalyoung Jeong
___
If your question is of interest to others as well, please add an entry to the
Dear all,
Recently, I updated ConTeXt using "ctxtools". I also install latest LM
otf fonts and some map file for dvipdfm.
After teshashing and creating formats, I tried a simple file. It
worked well in ConTeXt, but in XeTeX+ ConTeXt, I got several warnings
related with map files as followin
Dear Mojca,
Thank you for your instruction.
After updating XeTeX binaries, warnings are disappeared but a new one.
** WARNING ** Could not open config file "dvipdfmx.cfg".
I added the line
"TEXFONTSMAPS.dvipdfmx = .;$TEXMF"
in texmf.cnf below the line
TEXFONTSMAPS = .;$TEXMF/Font/,ap/..
Dear all,
I hope that you understand a little bit off topic question.
Recently, I installed smultron and set it up to use ConTeXt Minimals
following the instruction in ConTeXt wiki.
Basically it worked.
But the command result window didn't properly show what is going on
during the compilation
Dear all,
In ConTeXt, the following example was shown in colors.
\setupcolors[state=start]
\starttext
The use of color in \TeX is not {\red easy}.
{\blue What color is it?}
\stoptext
but, the same text after defining new typescript and saved for XeTeX
+ConTeXt, the colors were gone. It is p
Dear all,
It is not a big problem, but I don't know why this curious thing
happened.
A few days ago, I updated ConTeXt and made a format file for XeConTeXt.
I run a file which was compiled well before and got a strange
results: at this time.
all the bullets of the itemized lists are gone(n
Dear Taco and Hans,
After updating ConTeXt again, bullets appeared correctly although
there is no change in my file.
I guess, I might make some mistake during the previous installation.
I am sorry to give you a false alarm.
Thank you.
Best regards,
Dalyoung
___
Dear all,
I'd like to display several tables of the same size in an 3*2 array form.
I tried the commands \placetables and \startcombination like in thd dispaly of
figures, but it didn't work. My only solution is to use \startcolumns right now.
Is it possible to use \startcombination in some way?
Dear Hans,
Thank you for your answer.
Since it worked perfectly before, I created XeTeX-ConTeXt format using
texexec --make --xtx en
for a test and run "texexec --xtx file.tex".
It run OK and I got a pdf output. I think that it is not only the
font problem unless texmfstart uses fonts
Dear all,
I have installed gnuplot and others(aqua term, x11).
I tested the minimal sample file in ConTeXt Wiki.
In the wiki page, there is a command like
\startGNUPLOTgraphics{sin}
plot sin(x)
\stopGNUPLOTgraphics
but there is an error message like
l.6 \startGNUPLOTgraphics
Hi, all
I have no problem to get an pdf output using XeTeX and XeLaTeX but, I
got some errors using XeTeX+ XonTeXt.
After many tests, I think that the error is related with the font
(including Korean) which I installed privately.
If I use the fonts installed by system, then everything is OK.
Dear all,
By installing TeX from the beginning and changing to new font family,
"CFF: Invalid caracter" error was disappeared.
I think that there are some problems in some korean fonts
But the same file had a little problem in Powerbook G4(OS X 10.4.7).
I think that it is not the problem in X
Dear all,
Yesterday, I updated ConTeXt using i-installer(V 2.84).
It worked fine with XeTeX too. I am able to make presentation using
ConTeXt + XeTeX which was not possible before.
Today I tried to update ConTeXt in Mac located in school. At this
time, I used the upgraded i-installer(V 2.85).
Dear all,
Searching the lists, I found one and I got the output what I want as
following image. But, as you noticed, there is a lot spaces between
"Theorem" and the start of the text. Also there is the same space
between "Proof" and the start of the text. Is it normal? or Is there
any me
Dear all,
I'd like to ask about drawing a line in the header and a line between
columns.
1)I'd like to add hairlines in the header using before and after in
\setupheader, but the lines was drawn from the leftend of the
leftmargin with the textwidth only. So, there is no line at the right
Deaer all,
To give a numbering to the examples in a chapter, I tired the following:
\defineenumeration[example]
[location=serried,
headstyle=bold,
text=Example,
way=bychapter,
width=broad,
number=yes,
after=]
To use \inframed, I am able to include "Example" ins
Dear all,
After updating ConTeXt to the newest version, I still have font error
which was not the problem in the previous version.
After downloading new version of LM fonts, I copied the files in the
corresponding folder under .../gwTeX/texmf.texlive/.
To use them in XeConTeXt, I tried
"ctx
Dear Taco,
I have installed following map files in the folder /usr/local/gwTeX/
texmf.texlive/fonts/map/pdftex/context/
The map files are
{cs-lm.map, ec-lm.map, el-lm.map, ..., texansi-lm.map, ts1-lm.map}
which is included in the new version.
I put those files only in the folder.
Does it cau
Dear all,
For korean sentences, I am using XeConTeXt with korean otf font as
the bodyfont. In that case, greek capital letters in math mode are
not displayed wit the warning message
"** WARNING ** Glyph for CID 18168 missing in font "YoonMyungjoM/H".
YoonMyungjoM is the name of the korean font
Hi, all,
I have downloaded binary files(lua5_1_2_Darwin89_bin_tar). After
unzip, there are 3 files "bin2c5.1, lua5.1, luac5.1".
I copied lua5.1 as luatex and texlua in the folder /usr/texbin.
I also copied luatools.lua as luatools in the folder /usr/texbin.
I updated the ConTeXt and try to i
Dear Thomas,
How careless I am! and sorry not to give you a sufficient information.
As you said, lua!=luatex.
I downloaded and installed luatex in the folder /usr/texbin.
I also copied it as texlua.
Now, It seems to me that luatools is working without the previous
error.
However, there is a p
Dear Thomas and Arthur,
Thank you for your detailed help.
Copying texlua and creating .luatex file make luatools run smoothly.
Now, luatools --generate run well.
I'd like to ask a few questions.
1. But, there is a warning message as following for "luatools --
ini ...".
..
.
Thank you, Thomas, Arthur, and Taco,
I checked texmf.cnf. There are two texmf.cnf
gwTeX/texmf.cnf ---> there is no code for the memory setup, it
just describe the TDS structure.
gwTeX/texmf/web2c/texmf.cnf ---> trie_size = 40
gwTeX/texmf.local/web2c/ no texmf.cnf
Ge
Dear Thomas,
I found the folder /usr/local/Build/powerpc/TeXLive.2006. I
remembered that I have tried to install TeX using the source before.
When I open terminal, .luatex in not implemented yet and "texexec --
make --all --pdftex" run without any errors.
%
texexec --make
Hi,
Again I'd like to ask you some help.
Since I have no idea what is wrong in my TeX(gwTeX), I tried from the
beginning.
I removed installed gwTeX, and reinstalled MacTeX-2007 package.
I checked the followings:
$ kpsewhich texmf.cnf
/usr/local/texlive/2007/texmf/web2c/texmf.cnf
$ kpsewhich
Dear Hans,
It says nothing.
dalyoung$ luatools --variables
dalyoung$
%
Just blank lines for other options, like --expansions, --
configurations, --show-path, etc.
I copied /texmf-local/scripts/context/lua/luatools.lua to /usr/texbin/
luatools.
If there is not
Dear Otared,
Thank you for your mail.
Since there is no echo at all on this matter for a few days, I think
that I am the only person who has the installation problem.
I tired in many ways. I repeated the installation process three
times from the scratch.
But I have no progress at all.
I mad
Dear Hans,
Thank you for the reply.
Here is the codes of luatools.lua from line number 1106 -
%%%
1106: if md5 then do
1107:local function convert(str,fmt)
1108:return (string.gsub(md5.sum(str),".",function(chr)
return string.format(fmt,string.byte(chr)) end))
1109:
Dear Thomas, Mojca, and Otared,
Thank you for the instructions. I think that I followed the
instructions of installation without problems. But I have a problem
running luatools.
A few week ago, I succeeded running luatools --generate, but not
luatools --ini --... after making .luatex contai
Dear Thomas,
I didn't recognize that there was an answer for the problem already.
It is a good news. I am almost close.
Thank you again.
Best regards,
Dalyoung
___
If your question is of interest to others as well,
Dear Mojca,
Thank you for the reply. As you did, I send my problem to the list. I
think that I am a problem maker.
I wonder why the output of XeTeX+ConTeXt was changed after the upgrade
to Leopard.
I didn't change anything in TeX system. I just upgraded the OSX.
But nicely working XeTeX+Co
Hi all,
Recently, I had a problem using XeTeX+ConTeXt after the upgrade to
Leopard. You may read my mails to the list already.
Let me describe it in short. XeTeX and XeLaTeX worked well. But in the
output via XeTeX+ConTeXt, all korean letters are shown as blank or as
the series of squares([s
Dear Idris, Aditya, and Wolfgang,
Thank you for the replies.
Removing \start-stop formula and using \vcenter worked well.
However, adding $\displaystyle ...$ gave the strange output. The
location of the captions are not under the matrix. It looks like that
there are four columns, "matrix cap
Dear Saji,
You contact the right person, Dohyun Kim. He is one of the expert in
KTUG and who write kor-00 module for ConTeXt.
Another way for Korean is to use XeTeX+ ConTeXt, then you can use
some korean fonts in the system.
I think that using the module kor-00 is easier.
If there are someon
Hi,
Recently, I tried to set for LuaTeX following the "Running_Mark_IV" in
wiki.
1. I updated ConTeXt using "ctxtools --update".
I didn't use "rsync -av ..." as in wiki for updating because I
got "cannot find command texexec" error after updating ConTeXt.
2. Updated LuaTeX using "rsync
Thank you for all the suggestions.
I have tried your suggestions and they worked well.
Thank you again.
Best regards,
Dalyoung
___
If your question is of interest to others as well, please add an entry to the
Wiki!
Dear all,
Here are two questions.
1. about ctxtools
Recently, I updated TeXLive 2008 using "tlmgr". After that I try to
update ConTeXt using "ctxtools --update".
It downloaded cont-tmp.zip and extracting it. After mktexlsr, there
was the first error but it proceeded without stop.
.
mkt
Dear Mojca, Yue, and Hans,
Thank you for the help.
I updated ConTeXt and LuaTeX using rsync to the foler .../texlive/
2008/../texmf-local.
"texmfstart texexec --make (--xtx) --all" run smoothly, but luatools
still has a cnf error.
I'll do it again from the beginning when I have time.
However,
Dear Mojca,
"texmfstart texexec --make (--xtx) --all" run smoothly, but luatools
still has a cnf error.
Did you update the scripts in binaries as well? (Unless you updated
ConTeXt from TL repository, it will keep the old mtxrun in binaries,
and that one doesn't work at all.)
Mojca
I upgraded
Dear Diego,
Yes, in ConTeXt Minimals, LuaTeX is working well.
Now, I am testing LuaTeX in TL2008.
I hope that LuaTeX works in both environments. Too greedy?
However, I couldn't solve cnf problem yet. I may leave it for a while.
Thank you.
Best regards,
Dalyoung
_
Dear all,
I tried to load figure in LuaTeX, but I couldn't succeed.
However, it is perfectly working in ConTeXt and XeConTeXt.
I don't know what is wrong.
best regads,
Dalyoung
My system is Mac 10.5.6, ConTeXt Minimal, LuaTeX ver 0.40.1.
Here is a short test file.
\starttext
Th
50 matches
Mail list logo