[NTG-context] Natural tables framecolor=white regression

Hi, Consider the following MWE: \starttext \setupTABLE[ rulethickness=5pt, framecolor=white, %red, background=color, backgroundcolor=gray, frame=off] \setupTABLE[1][2][foregroundcolor=white, topframe=on] \setupTABLE[r][2][topframe=on] \bTABLE[setups=table:color] \bTR \bTD One

Re: [NTG-context] Natural tables | 2 tables in a page seem to interfere with each other?

Wolfgang, Thank you very much for the information. Yes, this was the trick I was looking for. I haved added this information in the Wiki - https://wiki.contextgarden.net/TABLE#Settings_for_multiple_TABLEs_in_a_single_page Hope it is accurate enough. Thank you once again! -Ramkumar On Wed,

Re: [NTG-context] Natural tables | 2 tables in a page seem to interfere with each other?

Ramkumar KB schrieb am 16.06.2021 um 17:33: Hi, I have 2 "natural tables" in one page and it appears that I have to (manually) reset the columns in the second table, for those columns that I had set specific width. See the example below - Maybe I am missing a trick or two - or this indeed

[NTG-context] Natural tables | 2 tables in a page seem to interfere with each other?

Hi, I have 2 "natural tables" in one page and it appears that I have to (manually) reset the columns in the second table, for those columns that I had set specific width. See the example below - Maybe I am missing a trick or two - or this indeed is the desired behavior? Thank you very much.

Re: [NTG-context] Natural Tables: spaceinbetween not working?

Am 30.09.2020 um 22:03 schrieb Wolfgang Schuster: Denis Maier schrieb am 30.09.2020 um 21:54: Hi, spaceinbetween seems to have no effect in this example: === \setupTABLE [spaceinbetween=25pt,split=yes] A few options need [start] when you set them before \bTABLE. \setupTABLE

Re: [NTG-context] Natural Tables: spaceinbetween not working?

Denis Maier schrieb am 30.09.2020 um 21:54: Hi, spaceinbetween seems to have no effect in this example: === \setupTABLE [spaceinbetween=25pt,split=yes] A few options need [start] when you set them before \bTABLE. \setupTABLE [split=yes] \setupTABLE [start]

[NTG-context] Natural Tables: spaceinbetween not working?

Hi, spaceinbetween seems to have no effect in this example: === \setupTABLE [spaceinbetween=25pt,split=yes] \starttext \bTABLE \dorecurse{50}{\bTR \bTD table cell \eTD \bTD table cell \eTD \eTR} \eTABLE \stoptext == What am I missing? Best, Denis

Re: [NTG-context] natural tables to extreme tables

On 02/28/2018 11:35 PM, Hans Hagen wrote: page 26 of the xtable manual ... you define tagged settings and can use these tag for cells and rows OK Hans, I see that, thanks a lot! But it still means I have to tag the cells/rows? As always, I'm playing with xml and Lua and am trying to write

Re: [NTG-context] natural tables to extreme tables

On 2/28/2018 10:28 PM, Thomas A. Schmitz wrote: Hi, for my experimenting with tables: is there a way to set up individual columns in xtables? Maybe I'm thick tonight, but I couldn't find anything in the manual or the source. If I have this setup \setupTABLE [frame=on,split=repeat]

[NTG-context] natural tables to extreme tables

Hi, for my experimenting with tables: is there a way to set up individual columns in xtables? Maybe I'm thick tonight, but I couldn't find anything in the manual or the source. If I have this setup \setupTABLE [frame=on,split=repeat] \setupTABLE [column] [1] [width=0.7cm,align=left]

Re: [NTG-context] natural tables and columndistance/spaceinbetween

On Mon, 30 Nov 2015 13:23:28 +0100 Wolfgang Schuster wrote: > You can use the boffset key to set a different offset value for the > bottom of the cell. > > The correct the position of the frame at the bottom you can use > metapost to draw the frame as background

Re: [NTG-context] natural tables and columndistance/spaceinbetween

Alan BRASLAU 2. Dezember 2015 um 17:25 On Mon, 30 Nov 2015 13:23:28 +0100 Thanks Wolfgang. boffset (or toffset) works to offset the text in an individual cell. But when using background=color,backgroundcolor=lightgray (for example), this offset of course gets

Re: [NTG-context] natural tables and columndistance/spaceinbetween

Alan BRASLAU 26. November 2015 um 02:44 In natural tables http://wiki.contextgarden.net/TABLE the parameters columndistance=dimension, and spaceinbetween=dimension, will set the gaps between columns and rows, respectively. Is there some way of specifying row gaps

[NTG-context] natural tables and columndistance/spaceinbetween

In natural tables http://wiki.contextgarden.net/TABLE the parameters columndistance=dimension, and spaceinbetween=dimension, will set the gaps between columns and rows, respectively. Is there some way of specifying row gaps for specific rows? For example, say that I only want a gap after the

Re: [NTG-context] Natural tables introduces spaces in \type

On 11/5/2014 21:50 PM, Christoph Reller wrote: On 11/5/2014 10:28 AM, Hans Hagen wrote: On 11/5/2014 8:09 AM, Christoph Reller wrote: Thank you very much Hans! Maybe you could tell me why the following still produces a space in front of the full stop:

Re: [NTG-context] Natural tables introduces spaces in \type

hello all, i do not have nfts, but there are assume users that do not live in western countries and use characters that are not in ascii!! just a thought. regards Keith. Am 07.11.2014 um 14:44 schrieb Christoph Reller christoph.rel...@gmail.com: On Fri, 7 Nov 2014 09:11:09 +0100

Re: [NTG-context] Natural tables introduces spaces in \type

On Thu, 6 Nov 2014 16:15:36 +0100 Christoph Reller christoph.rel...@gmail.com wrote: Of the above characters the following are disallowed on NTFS Not everyone uses NTFS. ___ If your question is of interest to others

Re: [NTG-context] Natural tables introduces spaces in \type

On Fri, 7 Nov 2014 09:11:09 +0100 Alan Braslau alan.bras...@cea.fr wrote On Thu, 6 Nov 2014 16:15:36 +0100 Christoph Reller christoph.rel...@gmail.com wrote: Of the above characters the following are disallowed on NTFS Not everyone uses NTFS. Another reason for not making a file-name

Re: [NTG-context] Natural tables introduces spaces in \type

On 11/5/2014 9:50 PM, Christoph Reller wrote: On 11/5/2014 10:28 AM, Hans Hagen wrote: On 11/5/2014 8:09 AM, Christoph Reller wrote: Thank you very much Hans! Maybe you could tell me why the following still produces a space in front of the full stop:

Re: [NTG-context] Natural tables introduces spaces in \type

On 11/6/2014 9:58 AM, Hans Hagen wrote: we could have a specific filename cleaner but of course there will be users who have paths that have spaces after the \ ... okay, we could just not support evil paths like that Hans A rigorous filename cleaner would have to treat a huge number of

Re: [NTG-context] Natural tables introduces spaces in \type

On 11/5/2014 8:09 AM, Christoph Reller wrote: On 11/2/2014 2:27 PM, Christoph Reller wrote: Hi, Why does \type{...} introduce spaces when used inside natural tables? MWE: \starttext \type{\test\test} %- no space introduced \bTABLE \bTR \bTD \typ{\test\test} \eTD

Re: [NTG-context] Natural tables introduces spaces in \type

On 11/5/2014 10:28 AM, Hans Hagen wrote: On 11/5/2014 8:09 AM, Christoph Reller wrote: Thank you very much Hans! Maybe you could tell me why the following still produces a space in front of the full stop: \definetype[ctype][compact=absolute] \starttext \bTABLE \bTR \bTD

Re: [NTG-context] Natural tables introduces spaces in \type

On 11/2/2014 2:27 PM, Christoph Reller wrote: Hi, Why does \type{...} introduce spaces when used inside natural tables? MWE: \starttext \type{\test\test} %- no space introduced \bTABLE \bTR \bTD \typ{\test\test} \eTD \eTR %- space introduced \eTABLE \stoptext it's the

[NTG-context] Natural tables introduces spaces in \type

On 11/2/2014 2:54 PM, Hans Hagen wrote: On 11/2/2014 2:27 PM, Christoph Reller wrote: Hi, Why does \type{...} introduce spaces when used inside natural tables? MWE: \starttext \type{\test\test} %- no space introduced \bTABLE \bTR \bTD \typ{\test\test} \eTD \eTR %- space

[NTG-context] Natural tables introduces spaces in \type

Hi, Why does \type{...} introduce spaces when used inside natural tables? MWE: \starttext \type{\test\test} %- no space introduced \bTABLE \bTR \bTD \typ{\test\test} \eTD \eTR %- space introduced \eTABLE \stoptext Kind Regards, Christoph

Re: [NTG-context] Natural tables introduces spaces in \type

On 11/2/2014 2:27 PM, Christoph Reller wrote: Hi, Why does \type{...} introduce spaces when used inside natural tables? MWE: \starttext \type{\test\test} %- no space introduced \bTABLE \bTR \bTD \typ{\test\test} \eTD \eTR %- space introduced \eTABLE \stoptext it's the way tex works (when

[NTG-context] Natural Tables

What is the difference between TD and TC in \bTD, \bTC , \eTD, and \eTC ? \starttext \bTABLE \bTR \bTC one \eTC \bTC two \eTC \bTC three \eTC \eTR \bTR \bTD one \eTD \bTD two \eTD \bTD three \eTD \eTR \eTABLE \stoptext

Re: [NTG-context] Natural Tables

The only place in the source where bTC is mentioned is in tabl-ntb.mkiv (and tabl-ntb.mkii), which says says \unexpanded\def\bTC#1\eTC{\bTD#1\eTD} \let\eTC\relax \unexpanded\def\bTX#1\eTX{\bTD#1\eTD} \let\eTX\relax \unexpanded\def\bTY#1\eTY{\bTR#1\eTR} \let\eTY\relax I guess that means \bTC and

Re: [NTG-context] Natural Tables

Am 12.05.2014 um 09:42 schrieb hwit...@gmail.com: What is the difference between TD and TC in \bTD, \bTC , \eTD, and \eTC ? \starttext \bTABLE \bTR \bTC one \eTC \bTC two \eTC \bTC three \eTC \eTR \bTR \bTD one \eTD \bTD two \eTD \bTD three

Re: [NTG-context] Natural Tables

Thank you Mikael and also Wolfgang for the response to my query. Regards, Whitloc Mikael P. Sundqvist mic...@gmail.com wrote: The only place in the source where bTC is mentioned is in tabl-ntb.mkiv (and tabl-ntb.mkii), which says says \unexpanded\def\bTC#1\eTC{\bTD#1\eTD}

Re: [NTG-context] Natural Tables in multiple columns

Am 25.12.2012 um 05:49 schrieb Jannik Voges forumj...@icloud.com: Hello ConTeXt-Users, I get a strange behavior (latest beta), when I try to typeset natural tables and normal text in multiple columns. When I type normal text into a column and add a natural table which total length is

[NTG-context] Natural Tables in multiple columns

Hello ConTeXt-Users, I get a strange behavior (latest beta), when I try to typeset natural tables and normal text in multiple columns. When I type normal text into a column and add a natural table which total length is small enough to fit into the column, the table is placed into the column

Re: [NTG-context] Natural Tables---Including a bit of cell style in a \define

On 22-11-2011 13:08, Pavneet Arora wrote: I am creating documentation labeling the circuits of electrical and network panels for a project of mine. Enclosed is a minimal example. What I would like is to define two macros: \unused and \spare (\unused referring to a circuit with no breaker

Re: [NTG-context] Natural Tables---Including a bit of cell

want are two double height rows similar to circuits 2 and 4 but for the entire row. advTHANKSance Message: 1 Date: Wed, 23 Nov 2011 09:38:51 +0100 From: Hans Hagenpra...@wxs.nl To: pavneet_ar...@waroc.com,mailing list for ConTeXt users ntg-context@ntg.nl Subject: Re: [NTG-context

Re: [NTG-context] Natural Tables---Including a bit of cell

On Wed, 23 Nov 2011, Pavneet Arora wrote: Hans, This didn't quite achieve what I was looking for. I was hoping for the formatting of circuit 4 in the output file test.pdf, rather than what was produced for circuit 8. I modified the definition of \spare so that by default a 15A breaker is

[NTG-context] Natural Tables---Including a bit of cell style in a \define

I am creating documentation labeling the circuits of electrical and network panels for a project of mine. Enclosed is a minimal example. What I would like is to define two macros: \unused and \spare (\unused referring to a circuit with no breaker installed, while \spare referring to a

[NTG-context] Natural tables (split) + setupinteraction = fail? (latest mkiv)

Hello there. See the following minimal example: begin \setupinteraction[state=start,color=black,contrastcolor=black] \starttext \placetable[split]{Test} {\bTABLE[split=yes] \dorecurse{60}{ \bTR \bTD hello \eTD \eTR } \eTABLE} \stoptext end % If I try to compile it, I get

Re: [NTG-context] Natural tables (split) + setupinteraction = fail? (latest mkiv)

On Sun, Jan 9, 2011 at 4:14 PM, Marco Pessotto melmo...@gmail.com wrote: Hello there. See the following minimal example: begin \setupinteraction[state=start,color=black,contrastcolor=black] \starttext \placetable[split]{Test} {\bTABLE[split=yes] \dorecurse{60}{ \bTR \bTD

Re: [NTG-context] natural tables -- split 'n grid

On 11-9-2010 6:03, Philipp Gesang wrote: Hi, line correction leads to unwanted vertical spacing in split natural tables. Example (in both MkII and MkIV): ··8· %\setuplayout[grid=yes] % not required to reproduce it \starttext

[NTG-context] natural tables -- split 'n grid

Hi, line correction leads to unwanted vertical spacing in split natural tables. Example (in both MkII and MkIV): ··8· %\setuplayout[grid=yes] % not required to reproduce it \starttext \dorecurse{4}{\input knuth\par} \startlinecorrection

Re: [NTG-context] Natural Tables Cell Borders

Am 05.01.2010 um 04:02 schrieb Curiouslearn: Thanks Wolfgang. I am not yet proficient enough in Metapost or Context to understand your code. But will look at it more carefully later. Meanwhile, is there any further work going on on Natural Tables? Are there plans to introduce the ability

Re: [NTG-context] Natural Tables Cell Borders

Thanks very much Wolfgang. Will try to play with this during this week. On Wed, Jan 6, 2010 at 6:54 AM, Wolfgang Schuster schuster.wolfg...@googlemail.com wrote: Am 05.01.2010 um 04:02 schrieb Curiouslearn: Thanks Wolfgang. I am not yet proficient enough in Metapost or Context to

Re: [NTG-context] Natural Tables Cell Borders

On 5-1-2010 4:02, Curiouslearn wrote: Thanks Wolfgang. I am not yet proficient enough in Metapost or Context to understand your code. But will look at it more carefully later. Meanwhile, is there any further work going on on Natural Tables? Are there plans to introduce the ability to have

Re: [NTG-context] Natural Tables Cell Borders

Am 31.12.2009 um 23:04 schrieb Curiouslearn: Help needed! The fifth \setupTABLE command below reduces the rulethickness of the bottomframe in cells (2,5) and (3,5). Is there a way to avoid that? I just want the rightframe to be thin in these cells, but the bottomframe to be thick. You can

Re: [NTG-context] Natural Tables Cell Borders

Thanks Wolfgang. I am not yet proficient enough in Metapost or Context to understand your code. But will look at it more carefully later. Meanwhile, is there any further work going on on Natural Tables? Are there plans to introduce the ability to have borders of different thickness for the same

[NTG-context] Natural Tables Cell Borders

Help needed! The fifth \setupTABLE command below reduces the rulethickness of the bottomframe in cells (2,5) and (3,5). Is there a way to avoid that? I just want the rightframe to be thin in these cells, but the bottomframe to be thick. Thanks a ton! \starttext \start \setupTABLE[frame=off]

[NTG-context] natural tables: when I say nc=2, I really mean it

Hi folks, When I compile this table: \starttext \setupTABLE[c][1][width=12pt,rightframe=off] \setupTABLE[c][2][width=108pt,leftframe=off] \setupTABLE[c][each][width=60pt] \bTABLE \bTR \bTD x \eTD \bTD y \eTD \bTD z \eTD \eTR \bTR \bTD[nc=2] thisisaverylongwordishthing \eTD \bTD word \eTD \eTR

Re: [NTG-context] natural tables: when I say nc=2, I really mean it

On Thu, Sep 3, 2009 at 11:06 PM, Zed Lopezzed.lo...@gmail.com wrote: Hi folks, When I compile this table: \starttext \setupTABLE[c][1][width=12pt,rightframe=off] \setupTABLE[c][2][width=108pt,leftframe=off] \setupTABLE[c][each][width=60pt] \bTABLE \bTR \bTD x \eTD \bTD y \eTD \bTD z \eTD

[NTG-context] Natural tables with \placetable

Can anyone tell me why this table example is placed on the left margin on the first page and the right margin on subsequent pages? My intention is to place against the right margin on all pages. \starttext \placetable[right, 4*line, split] {none} {\bTABLE[split=repeat,option=stretch,

[NTG-context] Natural tables header

Hello all: I have a 5 pages tables at 5 points with a repeating header and also some nc=2 and nr=2 in header. But when de table font is below 6 points there is a gap between the header and the body; and when there is some nr= in the header, the first row of the body repeats on every page.

Re: [NTG-context] Natural Tables, backgroundcolor, and frames

On Sun, May 4, 2008 at 11:22 PM, Brian R. Landy [EMAIL PROTECTED] wrote: Hi, I actually posted this last summer, but never got a reply and did not have a chance to follow up. When using natural tables, a cell with backgroundcolor enabled will overwrite the topframe/rightframe from the cell

[NTG-context] Natural Tables, backgroundcolor, and frames

Hi, I actually posted this last summer, but never got a reply and did not have a chance to follow up. When using natural tables, a cell with backgroundcolor enabled will overwrite the topframe/rightframe from the cell to the left/above. A workaround could be to always use

Re: [NTG-context] Natural tables, offsets

On Fri, Apr 11, 2008 at 3:24 PM, Santy, Michael [EMAIL PROTECTED] wrote: Wolfgang, Can you use the leftoffset/rightoffset on individual table cells? Yes you can. You could also the offset parameters in \framed and any other command which use \localframed. Wolfgang

Re: [NTG-context] Natural tables, offsets

Wolfgang, Can you use the leftoffset/rightoffset on individual table cells? Thanks, Mike -Original Message- From: [EMAIL PROTECTED] on behalf of Wolfgang Schuster Sent: Fri 4/11/2008 8:13 AM To: mailing list for ConTeXt users Subject: Re: [NTG-context] Natural tables, offsets On Sun

Re: [NTG-context] Natural tables, offsets

On Sun, Mar 30, 2008 at 7:04 PM, Willi Egger [EMAIL PROTECTED] wrote: Hi Wolfgang, Thanks a lot for this solution! I needed something similiar not so long ago for \framed and used this solution because it could be easy integrated in a setup command. Offset parameters for all margins would be

Re: [NTG-context] Natural tables, offsets

On Fri, 28 Mar 2008 14:02:55 -0700 David [EMAIL PROTECTED] wrote: Hi all I'm using the natural table environment, and would like the text in each cell to have some horizontal offset from the cell boundaries - but I don't want to change the vertical offset. Is there a way to do this?

Re: [NTG-context] Natural tables, offsets

On Sat, 29 Mar 2008 18:23:01 +0100, Wolfgang Schuster wrote: On Fri, 28 Mar 2008 14:02:55 -0700 David [EMAIL PROTECTED] wrote: Hi all I'm using the natural table environment, and would like the text in each cell to have some horizontal offset from the cell boundaries - but I don't

[NTG-context] Natural tables, offsets

Hi all I'm using the natural table environment, and would like the text in each cell to have some horizontal offset from the cell boundaries - but I don't want to change the vertical offset. Is there a way to do this? Thanks David

Re: [NTG-context] natural tables - first row not gray

Thanks. Yes, that works better. Is there some general I can draw from this? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Wolfgang Schuster Sent: Thursday, 5 April 2007 4:26 PM To: mailing list for ConTeXt users Subject: Re: [NTG-context] natural tables

Re: [NTG-context] natural tables - first row not gray

2007/4/5, MASON Peter J [EMAIL PROTECTED]: G'day, firstly thanks for your contextgarden.net website and the live-context facility. I checked my results against it. Could I seek help on this please. I'm expecting rows 2-4 of the table resulting from the segment below to have odd columns in

[NTG-context] natural tables - first row not gray

G'day, firstly thanks for your contextgarden.net website and the live-context facility. I checked my results against it. Could I seek help on this please. I'm expecting rows 2-4 of the table resulting from the segment below to have odd columns in rows 2-4 with white-on-black but all columns are

[NTG-context] Natural Tables with verbatim text

HelloIs it possible to use \type{} in a natural table cell? The example below seems to generate an error for me.Thanks!% example\starttextThis is a quick \type{test_run} of the problem. \bTABLE \bTR \bTD first \eTD\bTD {\bf alpha} \eTD\bTD one \eTD\eTR \bTR \bTD {\em second} \eTD\bTD beta \eTD\bTD

Re: [NTG-context] Natural Tables with verbatim text

Confused Scientist wrote: Hello Is it possible to use \type{} in a natural table cell? The example below seems to generate an error for me. Thanks! \type works (try \type{\TEST}), but not exactly as in normal environment. For your example you can use '\_' instead of '_' (even without

Re: [NTG-context] Natural Tables with verbatim text

Confused Scientist wrote: Hello Is it possible to use \type{} in a natural table cell? The example below seems to generate an error for me. Thanks! % example \starttext This is a quick \type{test_run} of the problem. \bTABLE \bTR \bTD first\eTD\bTD {\bf alpha} \eTD\bTD one

[NTG-context] Natural tables: how to adjust row height/vertical spacing?

This may almost be a FAQ question, but I just cannot find the answer in the wiki nor in mailing list archives: How do I adjust row height/vertical spacing in natural tables? In my old tables (\starttable etc.) the trick was \noalign{\vskip-6pt} but this one doesn't work with my natural tables.

Re: [NTG-context] Natural tables: how to adjust row height/vertical spacing?

Mari Voipio wrote: This may almost be a FAQ question, but I just cannot find the answer in the wiki nor in mailing list archives: How do I adjust row height/vertical spacing in natural tables? In my old tables (\starttable etc.) the trick was \noalign{\vskip-6pt} but this one doesn't work

Re: [NTG-context] Natural tables, rulethickness

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Patrick Gundlach [EMAIL PROTECTED] writes: but I wish (feature request) something like \toprule \bTR \eTR \midrule \bTR \eTR \bTR \eTR \bTR \eTR \bottomrule or together with \setupTABLE. Something like:

[NTG-context] Natural tables, rulethickness

Hello, I have a (natural) table and I'd like to have three rules in that table. The toprule and the bottomrule should be .08em thick, the midrule 0.05em. What would be a way to achieve that? The example is incorrect. \starttext \setupTABLE[r][each][frame=off]

Re: [NTG-context] Natural tables, rulethickness

Hi Patrick, Patrick Gundlach wrote: Hello, I have a (natural) table and I'd like to have three rules in that table. The toprule and the bottomrule should be .08em thick, the midrule 0.05em. What would be a way to achieve that? The example is incorrect. \starttext

Re: [NTG-context] Natural tables, rulethickness

On Sat, 4 Mar 2006, Patrick Gundlach wrote: \setupTABLE[r][first][bottomframe=on,rulethickness=.05em] Replace this line by \setupTABLE[r][2][bottomframe=on,rulethickness=.05em,height=0pt,offset=overlay] \bTABLE \bTR \bTD Lorem \eTD \bTD ipsum \eTD \bTD dolor sit \eTD \eTR and add here

Re: [NTG-context] Natural tables, rulethickness

On Sat, 4 Mar 2006, Peter Rolf wrote: \setupTABLE[r][2][topframe=on,rulethickness=.05em] Hello Patrick, I've just seen Peter Rolf's solution, this is of course the better and simpler one. The only case, where my empty row can be useful, is, when you have just 2 rows: \starttext

Re: [NTG-context] Natural tables, rulethickness

[Three rules in a table] Thanks, Peter and Peter, the following setup produces the output I'd like to have: \setupTABLE[r][first][topframe=on,rulethickness=.08em, after={\hrule width\hsize height.05em}] \setupTABLE[r][last][bottomframe=on,rulethickness=.08em] but I wish (feature request)

Re: [NTG-context] natural tables flaw: extra space

Eckhart Guthöhrlein wrote: Hi, consider the following example \starttext \setupTABLE[frame=off] \setupTABLE[row][first][topframe=on,rulethickness=1mm] \bTABLE \bTR \bTD 1,1 \eTD \bTD 2,1 \eTD \eTR \bTR \bTD 1,2 \eTD \bTD 2,2 \eTD \eTR \eTABLE \stoptext In the first cell, extra

Re: [NTG-context] natural tables flaw: extra space

Eckhart Guthöhrlein wrote: Hm. I would expect a frame that is 'off' to be inexistent, not only invisible. Alas, not that important, you will know why that is a feature. because in most cases (in framed, which is the cornerstone of bTABLE) one will not let a not present frame influence the game;

[NTG-context] Natural Tables (all options)

Hello, with a lot of help of Lutz (member of this list) I am now able to produce Context files and compile them to PDF. Now I am reading the documentation and some emails from this list to learn some details. I played a little bit with natural tables (also read the examples in ennatab.pdf) -