bonsoir Vianney,
2009/3/1 Vianney Lejeune
> Hello,
>
>I encounter a problem using the UPS MGE Evolution 850 VA USB with
> Debian Etch and the nut package available for this version. I got this
> error:
>
hey, Lenny is out. come on! ;-p
>
> ==syslog==
> Can't connect to UPS [MGE850VA]
2009/2/27 KP Kirchdoerfer
> Am Donnerstag, 26. Februar 2009 20:37:56 schrieben Sie:
> > Citeren KP Kirchdoerfer :
> >
> > [...]
> >
> > > And the upshid-ups driver ends with:
> > > No matching HID UPS found
> > > Driver failed to start (exit status=1)
> >
> > Try this driver again, but make sure
Hi Vitaly,
2009/2/26 Vitaly Polyakov
> Hello.
>
> You are the site administrator Project Network UPS Tools, are not you? I
> think? it is a good idea to add information about the compatibility the
> NUT with a Mustek PowerMust 424/636/848 USB. These UPS are using
> modified protocol, and therefo
Hey Jarett,
2009/2/24
> After upgrading to the 2.4.1 version, I wasn't able to read as many
> variables from my UPS. After a bit of experimentation, I determined that
> the firmware on my UPS was different than what is currently in the
> apcsmart driver, though it had worked before. I located
Hi David,
just a forward to the list since others might be interested in that info.
2009/2/25 David Newman
> On 2/17/09 5:26 AM, Arnaud Quette wrote:
> >
> > I've appended a script excerpt I've once made to address the guest
> > shutdown from the host.
> >
2009/2/26 Charles Lepple
> On Wed, Feb 25, 2009 at 1:54 PM, KP Kirchdoerfer
> wrote:
> > Hi,
> >
> > I own a UPS HP T750.
> >
> > Is there a driver for this UPS (either serial or USB)?
>
> As you may have already seen, we don't have an entry for this UPS in
> data/drivers.list yet.
>
> However,
Dear users and developers,
just a small mail to inform you that:
* EATON protocols library is now mostly complete!
UPSCode II has been published for some time now.
I've just released this morning a full set for the XCP protocol (Powerware),
including the general information, and Alarm / Meters ma
2009/2/20 Alexander I. Gordeev
> Hi Oleg,
>
> On Friday 20 February 2009 01:21:25 Oleg Pshenychnyy wrote:
> > Greetings Gentlemen,
> >
> > I have Mustek NetGuard 1000 UPS which is equivalent to Ippon SmartWinner
> > 1000.
> > I have tried to run several latest builds of NUT, but run megatec_usb
>
Hi Joerg,
2009/2/19 Joerg Pulz
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
>
> On Thu, 19 Feb 2009, Arnaud Quette wrote:
>
> Hi Volker,
>>
>> I forward your request to the user list since I don't currently have much
>> time to process it
Hi Volker,
I forward your request to the user list since I don't currently have much
time to process it.
quickly testing 2.4.1, I wasn't able to reproduce it.
a question: was it working with the exact same context/config with 2.2.2?
cheers,
Arnaud
--
Linux / Unix Expert R&D - Eaton - http://www
p;D - Eaton - http://www.eaton.com/mgeops
>> Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
>> Debian Developer -
>> http://people.debian.org/~aquette/<http://people.debian.org/%7Eaquette/>
>> Free Software Developer - http://arnaud.quette.free.fr/
I've appended a script excerpt I've once made to address the guest shutdown
from the host.
it was for ESX, and at that time, I was really surprised to not see anything
to address automagically an ordered shutdown (of the VMs)... hope this
helps.
Arnaud
--
Linux / Unix Expert R&D - Eaton - http://
Hi Scott and Rob,
2009/2/17 Rob MacGregor
> On Tue, Feb 17, 2009 at 10:12, Scott Evans
> wrote:
> > Hi Arnaud...
> >
> > Will this update be made available as .deb file ??? I'm using Ubuntu, I
> > prefer to use files from the repositories over compiling,
>
> That is going to be largely in the h
Network UPS Tools version 2.4.1 has been released.
http://www.networkupstools.org/
Direct access:
- Download: http://www.networkupstools.org/source/2.4/nut-2.4.1.tar.gz
- News: http://www.networkupstools.org/source/2.4/new-2.4.1.txt
- ChangeLog: http://www.networkupstools.org/source/2.4/ChangeLo
p;D - Eaton - http://www.eaton.com/mgeops
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://people.debian.org/~aquette/
Free Software Developer - http://arnaud.quette.free.fr/
> On Mon, Feb 16, 2009 at 9:13 AM, Arnaud Quette wrote:
>
2009/2/13 Douglas Parsons
> Arnaud,
>
> Cool. Found the unit. Looks like they renamed it as I had a Pulsar EX 2200
> and it is now the Pulsar M 2200. The EX line only goes to 1500 now. Sent
> the link to the reseller.
>
not that easy again ;-)
the various ranges are under renaming between MGE a
2009/2/13 Douglas Parsons
> Hello,
>
Hi Doug,
> I am looking for a compatible brand for nut. I currently have both APC and
> MGE units in house. I liked the MGE units and had switched to them after
> several bad experiences with the APC line. We ordered 13 APC Rack mount
> units and the qualit
2009/2/12 Scott Evans
> Hi Arnaud...
>
Hi Scott,
> I've attached a simple graphic for the pin-out of the SOLA-330 UPS cable
>
thanks. I've updated the page:
http://test.networkupstools.org/Support/Cables/SOLA
cheers,
Arnaud
___
Nut-upsuser mailing
2009/1/29 Scott Evans
> Hi To all on this list...
>
> I emailed the EATON (the company that has bought out SOLA)
>
and that sponsors NUT ;-)
> to request some information about the pin-out for this model UPS and I got
> a reply today!
>
> The answer is really simple! this model UPS just uses
Hey Alexey,
I just realized that you sent this mail privately!
2009/2/5 Alexey Rytchkov
> Hi,
>
> It seems /make clean/ do extra work when it removes scripts/hal/
> ups-nut-device.fdi.in and scripts/udev/nut-usbups.rules.in.
> Configure fails not finding this files.
> Your can reproduce that by
Network UPS Tools version 2.4.0 has been released.
http://www.networkupstools.org/
Direct access:
- Download: http://www.networkupstools.org/source/2.4/nut-2.4.0.tar.gz
- News: http://www.networkupstools.org/source/2.4/new-2.4.0.txt
- ChangeLog: http://www.networkupstools.org/source/2.4/ChangeLo
Hi Daniel,
2009/1/27 Daniel O'Connor
> On Thursday 25 September 2008 17:56:43 Daniel O'Connor wrote:
> > > you might want to have libusb debug trace also, to see more low level
> > > things. use "export USB_DEBUG=3" before launching usbhid-ups.
> > > you might also have a look at your kernel out
Network UPS Tools version 2.4.0-pre2 has been released.
http://www.networkupstools.org/
Direct access:
- Download:
http://www.networkupstools.org/source/2.4/testing/nut-2.4.0-pre2.tar.gz
- News: http://www.networkupstools.org/source/2.4/testing/new-2.4.0-pre2.txt
- ChangeLog: http://www.networku
2009/1/4 Charles Lepple
> On Fri, Jan 2, 2009 at 3:27 PM, Hannu Vuolasaho wrote:
> >
> >>
> >> We are still in the process of collecting all the NUT/USB/*BSD
> >> documentation from various emails, but have you also checked
> >> /dev/usb0? I believe that libusb on BSD requires permissions on
> >
Dear NUT users and developers,
A bit later than usual, here is the traditional end of the year mail
to sum up the past year, think about the future and make some
announcements.
Those of you who have followed closely the project already know: 2008
has been a harder year than ever.
And the UPS worl
Hi Johan,
just a quick note to say that I saw your mail and will process it soon.
sorry for not having answered earlier, but the Christmas mail I'm
preparing will complete your mail..
cheers,
Arnaud
--
Linux / Unix Expert R&D - Eaton - http://www.eaton.com/mgeops
Network UPS Tools (NUT) Project
Network UPS Tools version 2.4.0-pre1 has been released.
http://www.networkupstools.org/
Direct access:
- Download:
http://www.networkupstools.org/source/2.4/testing/nut-2.4.0-pre1.tar.gz
- News: http://www.networkupstools.org/source/2.4/testing/new-2.4.0-pre1.txt
- ChangeLog: http://www.networ
Hi Marco,
just a (very) quick followup...
the support being overloaded (so do I but), I'll answer to your
questions to speed up the process ;-)
Le mercredi 10 décembre 2008 à 21:52 +0100, Marco Chiappero a écrit :
> Arnaud Quette ha scritto:
> > [a quick walk through the ml, stil
2/10 Marco Chiappero :
> Arnaud Quette ha scritto:
>>
>> [a quick walk through the ml, still from the UDS/Googleplex...]
>>
>> Hi Marco,
>
> Hi Arnaud, good to read you!
>
>>> A digression about the fan: it's really annoying not just because it&#x
[a quick walk through the ml, still from the UDS/Googleplex...]
Hi Marco,
2008/12/7 Marco Chiappero <[EMAIL PROTECTED]>:
> Arjen de Korte ha scritto:
>
>> Regarding this, the fan is indeed annoying, but I don't agree with the
>> other arguments you're raising here. MGE officially supports NUT, yo
Hi Daniel,
2008/11/18 Daniel O'Connor <[EMAIL PROTECTED]>:
> On Tuesday 18 November 2008 19:57:23 Arnaud Quette wrote
>> a small update... sorry for the delay!
>
> No problem :)
thanks for your kindness
>> > Yes I got the sorry tale from our wholesaler wh
2008/11/18 Rob MacGregor <[EMAIL PROTECTED]>:
> On Tue, Nov 18, 2008 at 09:27, Arnaud Quette <[EMAIL PROTECTED]> wrote:
>> I've installed a FreeBSD into VirtualBox, but haven't yet completed
>> this install (what's the right command to install nut bt
Hi John,
2008/11/16 John @ BER Ltd <[EMAIL PROTECTED]>:
> Hi,
> I'm at my wits end and need help regarding my UPS. I am a newbie to Linux
> (10 months) and need help with trying to configure my UPS to my Linux SME
> server.
> I have little or no experience with Bash and am finding it overwhelming
Hi Daniel,
a small update... sorry for the delay!
2008/11/6 Daniel O'Connor <[EMAIL PROTECTED]>:
> On Tuesday 04 November 2008 02:08:50 Arnaud Quette wrote:
>> still on my stack. I've discussed a bit with our QA team, and we are
>> checking to setup something to t
hey there,
2008/11/11 <[EMAIL PROTECTED]>:
> On Tue, Nov 11, 2008 at 12:13:38AM +0200, Janeks Kamerovskis wrote:
>> > >
>> > > I have no /dev/bus/...
>> Sorry, I was wrong it is!
>>
>> >
>> > This is strange...
>> > Ok, waiting for the output of megatec_usb with -D...
>> ???
>>
>
> I asked yo
Hi Daniel,
2008/11/3 Daniel O'Connor <[EMAIL PROTECTED]>:
> On Tuesday 28 October 2008 20:30:29 Daniel O'Connor wrote:
>> On Tuesday 28 October 2008 19:36:25 Arnaud Quette wrote:
>> > > Looking at the above, you're probably using the newmge-shut driver,
2008/10/30 Alexander I. Gordeev <[EMAIL PROTECTED]>:
> Hi Arnaud,
>
> On Thursday 30 October 2008 13:25:20 you wrote:
>> Hi Alexander and Chuck,
>>
>> ok, the situation is now clear to me.
>> So the mentioned patch hasn't been reconducted for 2.2.2!
>> thanks for having recalled me everything (I'm
Hi Alexander and Chuck,
2008/10/29 <[EMAIL PROTECTED]>:
> Arnaud,
>
> On Wed, Oct 29, 2008 at 03:17:45PM +0100, Arnaud Quette wrote:
>> 2008/10/29 <[EMAIL PROTECTED]>:
>> > Hi Arnaud,
>>
>> Hi Alexander,
>>
>> thanks for your sum up.
2008/10/29 <[EMAIL PROTECTED]>:
> Hi Arnaud,
Hi Alexander,
thanks for your sum up.
> On Mon, Oct 27, 2008 at 04:30:20PM +0100, Arnaud Quette wrote:
>> 2008/10/27 Chuck Short <[EMAIL PROTECTED]>:
>> > Arnaud,
>> >
>> > Any thought about this
2008/10/28 Arjen de Korte <[EMAIL PROTECTED]>:
> Citeren Daniel O'Connor <[EMAIL PROTECTED]>:
>
>> When it loses comms I see stuff like this..
>> entering shut_get_report(id: 2f, len: 1800)
>> shut_wait_ack(): ACK received
>> entering shut_get_report(id: 20, len: 1800)
>> shut_wait_ack(): ACK recei
OS
(generally in the halt script) to be the UPS shutoff / poweroff.
this part is one of those handled by the package.
so next time, come back with the answers to the questions I've asked!
-- Arnaud
> ------
> From: "Arnaud Quette&qu
> ...
> If I use the powerpanel driver, it either dies, or fails to start.
this is the important part.
please, start the driver in debug mode (powerpanel -DDD -a ...) and
send us back the output for analysis.
as Kjell told prev., powerpanel is set to replace cyberpower. so we
have to hunt your is
Hi Nick,
Peter is retired from the project for excellent reason.
if you need support, use the Network UPS Tools mailing list. we will
be happy to help.
as Peter told, we don't work for APC (not at all, and proud!!). we are
friendly and won't pull your teeth ;-)
checking the below thread, your req
2008/10/27 Artin <[EMAIL PROTECTED]>:
> Arnaud
>
> I have already posted the debug output of 2.2.1 :
> http://launchpadlibrarian.net/18231851/debug2.txt
uh, right. I was off doing another update for Lenny...
looking a bit at the trunk's changelog, I would guess this is a
regression. not dug much
2008/10/27 Chuck Short <[EMAIL PROTECTED]>:
> Arnaud,
>
> Any thought about this? Its a regression from 2.2.1.
not yet! @Alex: any idea on your side (change of the default driver or
something alike)
this seems to be a timing or reading problem according to the "short read" msg
Artin, can you also
2008/10/14 Han Boetes <[EMAIL PROTECTED]>:
> Arnauds,
>
> It does work! I just had to completely stop upsd to make it reload
> the configuration file.
>
> Looks like two things don't work like one would expect reading
> from the documentation.
>
> 1) "upsd -c reload" does not reread the configurat
Hi Hans,
2008/10/13 Han Boetes <[EMAIL PROTECTED]>:
> I got a bunch of configfiles that look like this:
> mgmt-dev:/etc/nut# grep -v 'niets' *
> ups.conf:[ups]
> ups.conf:driver=newhidups
> ups.conf:port=auto
> upsd.conf:ACL all 0.0.0.0/0
> upsd.conf:ACL localhost 127.0.0.1/32
> upsd.conf:ACL remo
Hey there,
2008/8/25 Daniel O'Connor <[EMAIL PROTECTED]>:
> On Sat, 23 Aug 2008, Arjen de Korte wrote:
>> >> Are the 'usbhid-ups' (driver) and 'upsd' (server) also running as
>> >> 'nutmon'? We recommend that they run as a different user than the
>> >> 'upsmon' (client).
>> >
>> > They are running
Hi Harri,
2008/8/9 Harri Järvi <[EMAIL PROTECTED]>:
> I have trouble in getting communication work with MGE Ellipse 500. I
> bought it second hand and I don't have the cable for it.
>
> How do I know if it's the Serial or USB model? The serial number of the
> unit is: 769B16015. I suspect it is th
As I've stated some time ago, NUT is more and more embedded in
appliances, such as the Synology x07 NAS models and Opengear network
units.
I'm working for some time with these two manufacturers to see how NUT
can be improved for a better user experience.
There was a small article on Linux Devices
reported through launchpad: https://bugs.launchpad.net/bugs/253999
the possible regression is between nut 2.0.1 (sarge) and 2.2.1
(confirmed Jamie?)
@Arjen: it may be related to some of your changes there...
@Jamie: we'll need some debug output from the drivers (-DDD)
Arnaud
Hi Jimmy,
2008/7/24 <[EMAIL PROTECTED]>:
> Hello,
>
> FYI, I left an ebuild for mgeops in Gentoo Bugzilla under the number
> 232855.
thanks for this info.
do you have a direct pointer please?
have you used the one embedded in the source (packaging/ directory)?
FYI, I'm thinking of a complete r
2008/7/24 Charles Lepple <[EMAIL PROTECTED]>:
> On Thu, Jul 24, 2008 at 11:00 AM, Arnaud Quette <[EMAIL PROTECTED]>
> wrote:
> >
> > I guess you missed the dir itself:
> > as per /usr/share/doc/nut-cgi/README.Debian
> > > chmod 766 /etc/nut
>
Hi
2008/7/24 Georgy <[EMAIL PROTECTED]>:
> Hello all,
> I have succefully configure a trust 1200v ups with nut-2.2.2 on an
> ubuntu 6.06 LTS by follow this instructions :
> http://www.networkupstools.org/doc/2.2.0/INSTALL.html
>
> I have the nut-cgi 2.0.3-4 from the ubuntu repos installed
> Now,
Hi Daniel,
- increase MAXAGE in upsd.conf
- increase DEADTIME in upsmon.conf
- possibly increase the UPS polling interval (pollinterval in ups.conf)
which is set to 2 seconds currently, to lower the communication load on the
UPS.
the exact values depends on what you see in your log.
ie, if your U
2008/7/10 Arjen de Korte <[EMAIL PROTECTED]>:
>>> I've modified the apcsmart driver source & briefly tested against
>>> the 1250 with no issues noted yet.
>>>
>>> I've attached a patchfile for apcsmart.c & apcsmart.h with the
>>> extra bits I've added.
>>
>> thanks for testing that. I just committe
Hi Thierry,
could you give Nick some help on his below issue?
thanks,
Arnaud
2008/7/7 Никита Шишков <[EMAIL PROTECTED]>:
> Здравствуйте, Charles.
>
> Вы писали 4 июля 2008 г., 0:07:56:
>
>> [Please keep the list CC'd. Thanks.]
>
>> On Jul 3, 2008, at 2:36 PM, Никита Шишков wrote:
>
>>> Здравствуй
Hi Thomas,
Le mercredi 02 juillet 2008 à 18:52 +0200, Thomas Backman a écrit :
> Hey! I just bought my first UPS, a Cyberpower Value 600E, and set it
> up using NUT 2.2.x (on Gentoo x86_64). Everything is working great,
> using the usbhid-ups driver, and the UPS isn't on the compatibility
>
2008/7/2 Arjen de Korte <[EMAIL PROTECTED]>:
>> quite right about the outdated packages links.
>> wouldn't this one be more useful for nut:
>> http://packages.opensuse-community.org/index.jsp?searchTerm=nut
>
> I don't think so. It is much more convenient to add the OSS repository
> (the link can b
2008/7/2 Arjen de Korte <[EMAIL PROTECTED]>:
>>> > I am trying to build an rpm for nut-2.2.2 on 64 bit opensuse 11.0.
>>> Why?
>> I didn't dare hope that opensuse would include nut-2.2.2, so I visited
>> http://networkupstools.org/packages.html where "SuSE RPMs" goes nowhere.
>> Perhaps it would be
Hi Jayson,
I forward your request to the right place.
Carlos (or some other) will have an answer, or at least some questions for you.
-- Arnaud
2008/6/27 Jayson Anderson <[EMAIL PROTECTED]>:
> Greetings Arnaud,
>
> I wrote you some time ago about whether NUT would support the Belkin
> F6H550-UPS
Le lundi 23 juin 2008 à 21:16 +0530, John Kennedy a écrit :
> Salut!
bonjour
> I have an iBall Nirantar UPS-630 UPS
> (http://iball.co.in/inner/show_product_details2.asp?catid=25) and am
> interested in hooking it up to my Ubuntu box. Problem - it only comes
> with WinPower Windows driver... Alas
2008/6/6 Arjen de Korte <[EMAIL PROTECTED] <[EMAIL PROTECTED]>>:
> >> > Am I missing something in the logic, or do I just have an unusual
> >> case?
> >> Neither. These devices are just not suitable for use with NUT as long as
> >> the libusb library doesn't expose the physical ports the UPS is at
2008/6/6 Arjen de Korte <[EMAIL PROTECTED] <[EMAIL PROTECTED]>>:
> > I hadn't previously looked into libusb, but is there a reason why the
> > filename
> > member of usb_device is't matched on? On linux, they may not be unique
> or
> > deterministic in theory --- but in practice they are, particu
2008/6/1 Chris Cohen <[EMAIL PROTECTED]>:
> Sorry for the delay.
>
> On Friday 30 May 2008 09:30:45 you wrote:
> > Hi Chris,
> > >
> > > I just booted into a non-xen kernel (linux-image-2.6.24-17-server).
> > > Ran /lib/nut/usbhid-ups -a mgeups.
> > > The UPS shut down again and so did my entire n
Hi Chris,
2008/5/22 Chris Cohen <[EMAIL PROTECTED]>:
> On Thursday 22 May 2008 16:07:08 you wrote:
> > >> Weird. This is not something the driver can do, unless you
> > >> specifically tell it to kill the power (-k). I see that you're
> > >> using Linux 2.6.24-17-xen.
> > >
> > > I do. (Running U
2008/5/21, Chris Cohen <[EMAIL PROTECTED]>:
> Hi,
Hi Chris,
> I bought an Ellipse MAX 1100 a few months ago.
excellent choice ;-)
> First I attached it to my
> desktop and installed mge's personal solution pac. (a graphical
> interface which uses nut). It works. But I want to attach the ups to
Hi Udo,
2008/5/14 Udo van den Heuvel <[EMAIL PROTECTED]>:
> Hello,
>
> I'm just migrating my boxes to fedora 9 which brings us to the upstart
> mechanism instead of SystemV, etc.The distro as it is delivered does not
> have configuration which supports powerfail events.
>
> What can I put in /etc/
Hi Kristian,
Le mercredi 14 mai 2008 à 14:34 +0200, Kristian Wiklund a écrit :
>
> hi,
>
> first, thanks for the excellent work with "nut".
>
> "Trust 1300VA Management UPS PW-4130M" works fine with the stable
> release (built for solaris x86, using serial port communication).
> "megatec" pr
2008/5/14 Arjen de Korte <[EMAIL PROTECTED]>:
> > So yes, you're welcome to register a demo link, but using the freshly
> > created http://demo.networkupstools.org/
> > I've pointed your page, and just regenerated the DNS entries. So it
> > will take a few more days to propagate.
>
> Provided y
2008/5/14 Jean Delvare <[EMAIL PROTECTED]>:
> Hi Arnaud,
Hi Jean,
> On Tue, 13 May 2008 13:10:23 +0200, Arnaud Quette wrote:
> > 2008/5/13 Jean Delvare <[EMAIL PROTECTED]>:
>
> > > I'd like to accept but I doubt that my tight schedule will let me do
Bonjour Alain,
Le 13 mai 2008 15:16, Alain Le Thomas <[EMAIL PROTECTED]> a écrit :
> Hello,
> (Saddened for my bad English)
> I have just created a script to install NUT
> I manage the events with UPSSCHED and I would like to know how to launch
> this command via /etc/nut/upssched-cmd every 5 m
2008/5/13 Jean Delvare <[EMAIL PROTECTED]>:
> On Tue, 13 May 2008 10:14:36 +0200, Arnaud Quette wrote:
> > 2008/5/8 Jean Delvare <[EMAIL PROTECTED]>:
>
> > > On Wed, 7 May 2008 12:52:21 +0200, Arnaud Quette wrote:
> > > > Netw
2008/5/8 Jean Delvare <[EMAIL PROTECTED]>:
> Hi Arnaud,
Hi Jean,
> On Wed, 7 May 2008 12:52:21 +0200, Arnaud Quette wrote:
> > Network UPS Tools version 2.2.2 has been released.
>
> Installed, works perfectly for me. Thanks a lot for the excellent work!
>
> This
2008/5/2 Emard <[EMAIL PROTECTED]>:
> On Fri, May 02, 2008 at 09:29:28AM +0200, Arnaud Quette wrote:
> > Hi Emard,
> >
> > 2008/5/2 Emard <[EMAIL PROTECTED]>:
> > > HI all
> > >
> > > How to setup nut to use and monitor lap
Hi Dmitry and the list,
would you (or anyone owning such a device) be able to validate the below patch:
https://alioth.debian.org/tracker/index.php?func=detail&aid=310613&group_id=30602&atid=411542
Most notably, it's about the paths changes:
-#define APCC_OID_IEM_TEMP ".1.3.6.1.4.1.318.1.1.
Network UPS Tools version 2.2.2 has been released.
http://www.networkupstools.org/
Direct access:
- Download: http://www.networkupstools.org/source/2.2/nut-2.2.2.tar.gz
- News: http://www.networkupstools.org/source/2.2/new-2.2.2.txt
- ChangeLog: http://www.networkupstools.org/source/2.2/ChangeLo
Hi Emard,
2008/5/2 Emard <[EMAIL PROTECTED]>:
> HI all
>
> How to setup nut to use and monitor laptop battery on linux?
> (/proc/acpi/battery/BAT0/state)
why would you do so? there is nothing to gain doing so (no
master/slave conf possible).
there are already many PM tools suite in the field, a
Network UPS Tools version 2.2.2-pre3 has been released.
http://www.networkupstools.org/
Direct access:
- Download:
http://www.networkupstools.org/source/2.2/testing/nut-2.2.2-pre3.tar.gz
- News: http://www.networkupstools.org/source/2.2/testing/new-2.2.2-pre3.txt
- ChangeLog: http://www.network
Hi Arjen,
2008/4/22, Arjen de Korte <[EMAIL PROTECTED]>:
> Arnaud Quette wrote:
>
> >
> > > In the mean time, I have divided the main 'nut' package in the
> > > following sub packages:
> > >
> > > - nut (client applicati
2008/4/22, Arjen de Korte <[EMAIL PROTECTED]>:
> > well, that's the biggest problematic of packaging.
> > none of the solutions are perfect, and both have big pros and cons.
> > there are still many rooms for improvement there...
>
>
> Indeed. In the mean time, I have divided the main 'nut' packa
2008/4/21, Arjen de Korte <[EMAIL PROTECTED]>:
> Arnaud Quette wrote:
>
> >
> > > > There is no /var/state in openSUSE 10.3, so I changed PIPEFN and
> LOCKFN to
> > > > /var/run and defined directory /var/run/ups.
> > >
> > >
>
Hi Roger
2008/4/21, Roger Price <[EMAIL PROTECTED]>:
> On Mon, 21 Apr 2008, Roger Price wrote:
> > On Mon, 21 Apr 2008, Arnaud Quette wrote:
> >
>
> > > A source RPM for SuSE is also available, but I'm not sure it's x64 ready!
> > > http://op
2008/4/21, Arjen de Korte <[EMAIL PROTECTED]>:
> Arnaud Quette wrote:
>
> >
> > > No, and that's because I doubt that openSUSE will follow this approach.
> > > Historically, there hasn't been too much interest in splitting packages,
> > >
2008/4/20, Arjen de Korte <[EMAIL PROTECTED]>:
> Roger Price wrote:
> ...
> >> As you are using a usb ups, you may use this instead of the nut package.
> >> If you install it, the ups gets hotplugged by udev hal and would show up
> as a
> >> battery in the power monitor in Gnome. (should be th
2008/4/21, Arjen de Korte <[EMAIL PROTECTED]>:
> Arnaud Quette wrote:
>
> > I previously splitted the Debian packages in nut, nut-usb, nut-cgi,
> > nut-snmp, nut-dev, nut-doc (empty ATM) and now nut-hal-drivers. I've
> > then re-integrated the USB part into the c
2008/4/20, Arjen de Korte <[EMAIL PROTECTED]>:
>
> >> I'll try them tomorrow; meanwhile, another n00bie question : What does
> >> nut-hal do? Do I need it?
> >
> > The nut-hal package is a package that contains the hal drivers and fdi
> > file udev rules.
> >
> > As you are using a usb ups,
Network UPS Tools version 2.2.2-pre2 has been released.
http://www.networkupstools.org/
Direct access:
- Download:
http://www.networkupstools.org/source/2.2/testing/nut-2.2.2-pre2.tar.gz
- News: http://www.networkupstools.org/source/2.2/testing/new-2.2.2-pre2.txt
- ChangeLog: http://www.network
2008/4/8, Jean Delvare <[EMAIL PROTECTED]>:
> On Tue, 8 Apr 2008 11:23:33 +0200, Arnaud Quette wrote:
> > 2008/4/4, Jean Delvare <[EMAIL PROTECTED]>:
>
> > > * battery.temperature changed from 28 degrees C to 29.2 degrees C. Note
> > > that I am a bit
2008/4/10, David Erosa <[EMAIL PROTECTED]>:
> Public bug reported:
>
> Binary package hint: nut
>
> After updating to last nut package (2.2.1-2.1ubuntu6), the megatec_usb
> driver seems to be working, except for the charge percentage:
>
> $ /lib/nut/megatec_usb -D -a SAI
> ...
> Checking
Bonjour Jean,
2008/4/4, Jean Delvare <[EMAIL PROTECTED]>:
> Salut Arnaud,
>
>
> On Wed, 2 Apr 2008 16:31:36 +0200, Arnaud Quette wrote:
> > Network UPS Tools version 2.2.2-pre1 has been released.
> >
> > http://www.networkupstools.org/
> >
&g
Hi Alex and Carlos,
2008/4/5, Alexander I. Gordeev <[EMAIL PROTECTED]>:
> On Sat, 05 Apr 2008 16:38:15 +0400, Carlos Rodrigues
> <[EMAIL PROTECTED]> wrote:
>
>
> > On Fri, Apr 4, 2008 at 8:46 PM, Alexander I. Gordeev
> > <[EMAIL PROTECTED]> wrote:
> >
> > > > thanks for these info, and good luck
Hi Carlos,
2008/4/3, Carlos Rodrigues <[EMAIL PROTECTED]>:
> On Thu, Apr 3, 2008 at 8:11 AM, Arnaud Quette <[EMAIL PROTECTED]> wrote:
> > @Carlos, Andrey, Alexander, Jon: can one of you take care of
> > backporting this to Testing for -pre2?
>
>
> With all
Hi Alex,
2008/4/3, Alexander I. Gordeev <[EMAIL PROTECTED]>:
> On Thu, 03 Apr 2008 10:59:34 +0400, Arjen de Korte <[EMAIL PROTECTED]>
> wrote:
>
>
> >
> > > so there are chances that this has been backported in Testing /
> > > 2.2.2-pre1 (released today).
> > >
> >
> > No, it hasn't been backporte
Hi,
please keep the list cc'ed for info...
2008/4/3, Amadeus W. M. <[EMAIL PROTECTED]>:
> Thanks for the very informative answers. Please see below though.
>
>
> > > 1) How do I actually check that my setup is working?
> >
> > when you plug your unit, you should see the hald-addon-usbhid-ups
2008/4/3, Arjen de Korte <[EMAIL PROTECTED]>:
> > so there are chances that this has been backported in Testing /
> > 2.2.2-pre1 (released today).
>
>
> No, it hasn't been backported as far as I can see, so this is something
> that needs to be done for nut-2.2.2-pre2. Since we have active maintai
thanks for this update Arjen.
so there are chances that this has been backported in Testing /
2.2.2-pre1 (released today).
Can you (the bug reporters) grab this, call configure as per the
packaging/debian/rules, make and test from the build dir?
-- Arnaud
___
Carlos,
is this bug a known regression of 2.2.1 vs 2.2.0?
I can't find much in the ChangeLog.
https://bugs.launchpad.net/bugs/209001
thanks,
-- Arnaud
___
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/mail
Network UPS Tools version 2.2.2-pre1 has been released.
http://www.networkupstools.org/
Direct access:
- Download:
http://www.networkupstools.org/source/2.2/testing/nut-2.2.2-pre1.tar.gz
- News: http://www.networkupstools.org/source/2.2/testing/new-2.2.2-pre1.txt
- ChangeLog: http://www.network
2008/3/31, Amadeus W. M. <[EMAIL PROTECTED]>:
> I bought a new CyberPower CP850AVRLCD ups, connected it to a usb port
> and I'm trying to use it with hal. I installed
>
> [EMAIL PROTECTED] ~]# rpm -q nut nut-client
> nut-2.2.0-6.1.fc8
> nut-client-2.2.0-6.1.fc8
>
> lsusb sees it:
>
> [EMAIL P
601 - 700 of 1000 matches
Mail list logo
