We have 2 Equallogic Systems, And a Dell Servers.
We have every server give a block device home dir , so the user data are on
the home dir this is working great its format on xfs filesystem, and
running iscsiadm version 2.0-870 with linux kernel 3.10.57
But when we logging on the server, the
bash-4.3# iscsiadm -m session -P3
iSCSI Transport Class version 2.0-870
version 2.0-872
Target: iqn.2001-05.com.equallogic:0-8a0906-6c5f17a03-1244d61b0964922b-srv2
Current Portal: 192.3.168.39:3260,1
Persistent Portal: 192.3.168.25:3260,1
**
Interface:
Heres a sample how it looks like when Hit Kit is working (which whould
boost your SAN Performance dramatically).
root@xxx ~]$ iscsiadm -m session -P3
iSCSI Transport Class version 2.0-870
version 6.2.0-873.10.el6
Target: iqn.2001-05.com.equallogic:4-52aed6-f71e0d568-d8000144f353-
We can not hit kit installed thats is correct, the system are not support
get i back from the installer.
We use the fowling switchs
Dell Bladecenter we use the Dell PowerEdge M I/O Aggregator connect with
10Gbit to HP Procruve 3800 switchs and then connected to the 1Gbit
Equallogic's.
Than you should at least tune your iscsi.conf to fit the eql
requirements. I sent a working config from one of our Systems (but keep
in mind this is multiple Gbit, not 10G).
You can take the Manual for Citrix Xenserver Multipathing + Eql to get a
Direction how it should look like since its using
We have 2 Equallogic Systems, And a Dell Servers.
We have every server give a block device home dir , so the user data are on
the home dir this is working great its format on xfs filesystem, and
running iscsiadm version 2.0-870 with linux kernel 3.10.57
But when we logging on the server, the
Hit Kit is installed? Filesystem Mountparams?
Output of iscsiadm -m session -P3 whould be helpful
Am 02.12.2014 um 15:22 schrieb Stefan B:
We have 2 Equallogic Systems, And a Dell Servers.
We have every server give a block device home dir , so the user data are
on the home dir this is
Hello,
What Linux distro are you using?There are some common tweaks to the
/etc/iscsid.conf and sysctl.conf files that help improve performance.
This link covers how to configure RHEL with EQL. The same principles apply
to any recent Linux distro.
Thanks for reporting back.
If this happens again, give us the /var/log/messages and the output of
iscsiadm -m session -P 3
when the iscsiadm ….. —logout command is returning the errors you pasted below.
On Nov 30, 2014, at 12:08 AM, Shay Katz shak...@gmail.com wrote:
Hi,
during the last
hi
I am new to iscsi ,have some questions in learning,quite appreciate for
your help and time
1 \ both lio-utils and tgt are pure user space program? Both of them are
using the kernel iscsi module ? So ,what is the difference between them?
2 \ Are there any guide documents on how to setup a
Mike == Michael Christie micha...@cs.wisc.edu writes:
Mike,
Mike This was the issue we worked with Microsoft on wasn’t it? You guys
Mike figured out it was fixed in their target in a recent release
Mike right?
The issue we worked recently was wrt. the thin provisioning reporting.
The WRITE
stefj...@gmail.com schrieb am 02.12.2014 um 15:06 in Nachricht
5a7097b3-0dd7-4c28-abbf-ff66800b8...@googlegroups.com:
We have 2 Equallogic Systems, And a Dell Servers.
We have every server give a block device home dir , so the user data are on
the home dir this is working great its format
12 matches
Mail list logo