Hi there!
My reply to the original post didn’t come through so I’ll try again.
Rather than fiddling around I suggest your first port of call be the Total
Recorder web site, I’m willing to bet that this topic will be covered in one of
the FAQ sheets there.
> On 18 Nov 2014, at 7:59 am, Aidan
I assume vox is an driver spisific feature? I ask as I don't see it on
my side. Probibly you use one of the older drivers wich are working
better with xp, so I cannot really comment on that as I'm on windows7
with the latest 8.5 with the curnel filter driver.
On 17/11/2014, Howard Traxler wrote:
Hi Don.
I highly recommend the kernel mode filter driver if you are using 8.x.
The reason is you can use the same features with software recording
without an actual driver present on the system.
Hope this helps.
From Chris H in Derbyshire
Please check out my blog at http://chrishallsworth.kla
Hi all,
I am using Windows 7 Professional 32 bit.
Signed by Chris Hallsworth
E-mail and Facebook: christopher...@googlemail.com
MSN: ch9...@hotmail.com
Skype: chrishallsworth7266
Twitter: http://twitter.com/christopherh40
Klango: chrishallsworth
If you have any computer problems or queries, ple
Hi all,
It is not at the installation where it hangs. If I do get this problem
myself, or I know somebody who does, I will suggest it to them. Can't
wait for my very own license!
Signed by Chris Hallsworth
E-mail and Facebook: christopher...@googlemail.com
MSN: ch9...@hotmail.com
Skype: chri
Thankfully I've never had that problem with this software though I have had
problems where the installation just sat there doing nothing, don't know how I
fixed that one either .
The Total Recorder tech support area is extremely handy and very helpful so if
you continue to experience this probl
Hi chris!
which version of windows are you using?
Regards,
Jörgen Hansson!
Tel +46 703-601296
www.jorgenhansson.com
skype: djtropical4532
- Original Message -
From: "chris hallsworth"
To: "PC Audio Discussion List"
Sent: Thursday, August 05, 2010 10:37 AM
Subject: Total Recorder questi
Hey Dave,\
Right me privately. I have the program here I will send it too you as a
file attachment.
Scott
- Original Message -
From: "David Tanner" <[EMAIL PROTECTED]>
To: "'PC Audio Discussion List'"
Sent: Thursday, November 01, 2007 11:24 PM
Subject: Total Recorder Question
> Fo
www.highcriteria.com
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of David Tanner
Sent: Thursday, November 01, 2007 11:25 PM
To: 'PC Audio Discussion List'
Subject: Total Recorder Question
For a long time now I have seen messages about how accessible To
Hi,
Total Recorder can be downloaded from www.totalrecorder.com/downloads.htm.
Jani
- Original Message -
From: "David Tanner" <[EMAIL PROTECTED]>
To: "'PC Audio Discussion List'"
Sent: Friday, November 02, 2007 6:24 AM
Subject: Total Recorder Question
> For a long time now I have see
go to your settings and see if you find it there or go to the options where
you set up for recording and in there you can choose what recording format
you want.
- Original Message -
From: <[EMAIL PROTECTED]>
To:
Sent: Wednesday, September 13, 2006 9:21 AM
Subject: total recorder questio
First, make sure you have lane_enc.dll set up in this
folder: C:\WINDOWS\system\Lame_Enc.Dll
Next, go into the Recording Source and Perameters dialog, and make
sure Convert using "Recording format" specified below is
checked. then hit space on the Change button to open the dialog to
set the
Yeah, that's in the helpfile. You always have to start tr first and then
play your audio to record.
Jorge
___
PC-Audio List Help, Guidelines, Archives and more...
http://www.pc-audio.org
To unsubscribe from this list, send a blank email to:
[EMAIL PR
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Behalf Of russell Bourgoin
Sent: 30 September 2005 19:05
To: PC audio discussion list.
Subject: Re: Total recorder question
Hi,
If you are using the sound card rather than total recorder's
driver, simply change to the what you hear opt
Hi,
If you are using the sound card rather than total recorder's
driver, simply change to the what you hear option, or if you don't
have that option, which, I believe only creative labs products do,
try stereo mixer or whatever your sound card has for such an option.
H t H
Rusty
> At
I can recorcd with Total Recorder off my line-in but when I attempt to
record an Internet stream I end up with an empty file with no sound. What
do I need to change so I can record Internet streams?
Gerry
___
PC-Audio List Help, Guidelines, Archives a
Hi, Don. I finally tested that Total Recorder problem, to review, we're in
the advanced dialog of the Auto-stop recording feature telling the program
when to stop recording. The second check box lets us say that if nothing is
recorded for a given number of seconds, the recording should end. I fi
Dean, Thanks for your prompt response. In your response, you stated:
I haven't moved to 5.2, still using 5.1. I hadn't poked my head into
the
auto-stop recordingdialog, so thanks for the opportunity.
Using JFW, I don't see the problem you report. Maybe I'm
misunderstanding,
not unlikely. I
Don, good mystery. I think the culprit here may be phantom information
from a screen reader. In sum, I'm going to suggest that you write to
[EMAIL PROTECTED] with the question, explaining that you use a
screen reader, then please share your answer with me. They are very
responsive.
I haven
Sylvester,
When you open Total Recorder, you should have focus on the Recording source
& Parameters button. Press space on this button and then shift+tab four
times to get to the Change button. Press space on Change and you will be in
the area where you can choose the output parameters for your
I am still hoping someone can please give me directions on how to schedule a
job with t.r. I have asked a few times and know that some of you can do
this independently, but I can't figure out the advanced page where you have
to use the tuner. I would love either a concise tutorial on this prog
The short answer from looking at the manual is, no, you can't launch a
scheduler item if it requires a password. That is an unfortunate gap in
the program.
Dean
To receive concise weekly adaptive tech updates, send a blank message to
- [EMAIL PROTECTED]
___
Hi,
I'd love to know that tip as well. Thanks in advance,
David Truong
E-mail and MS messenger: [EMAIL PROTECTED]
Skype: blindboxer1967
Home Page: http://members.optusnet.com.au/davidtruong/
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Steph
ED]>
To: "PC audio discussion list. "
Sent: Tuesday, December 21, 2004 4:13 PM
Subject: Re: Total Recorder Question
Sounds as if you did not actually record any material.
At 03:35 PM 12/21/2004 -0800, you wrote:
Greetings! I just put Total Recorder 5 on my new XP System and when I
record a
Sounds as if you did not actually record any material.
At 03:35 PM 12/21/2004 -0800, you wrote:
Greetings! I just put Total Recorder 5 on my new XP System and when I
record any thing I can't figure out why the Play button doesn't come
up? I checked the tab under play/record and the play option
yup, there is.
as long as your recording from WMP, real, or winamp.
do an alt o, hit enter. go to the split tab, tab once, check that.
tab once and you'll be on conditions. hit that, tab four times, check that,
tab twice, check that. it'll be pretty self exclamitory
MSN
[EMAIL PROTECTED]
[Speak
Hi,
Just wanted to thank you for your response and let you know that it worked
for me. I didn't understand what to do in the Winamp configuration dialogue
so had never taken that last step. The odd thing is that with the Microsoft
sound mapper active as it apparently was I did not have my bootup
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Here's how I have my settings if this is any help to you, I have no trouble
here.
Firstly, I have Total Recorder as my default playback and recording driver,
this I set upnder Audio Devices, under Sounds in the Windows Control Panel.
Try setting t
I don't think that would matter.
are you listening to it as you record? or are you doing the sped up
recording.
MSN
[EMAIL PROTECTED]
I'm going outside now; I might be gone some time. -- The Doctor, in
"Earthshock"
- Original Message -
From: "Andrew J. LaPointe" <[EMAIL PROTECTED]>
To
Hello
The easiest way to get your registration code back for Total Recorder is to
go to the High Criteria web cite. When my email changed I had to do this.
There is a place to contact support. You should send them your email
address. They will contact you with your registration code for the prod
Drop a note to [EMAIL PROTECTED] and ask them for your code. There
pretty nice their.
*** REPLY SEPARATOR ***
On 7/7/2004 at 10:07 AM Mike Mote wrote:
>Hi folks! This may be a dumb question, but here it goes anyway. I'm
>trying to clone my desktop setup on my lap top, and I n
31 matches
Mail list logo
