Hi. For a long time now, I have noticed that I get buzzing in
recordings from my digital radio and tape recorder, even though using
the same set-up (2x RCA phono connectors in my mixer to 1x 3.5 mm jack
in the audio device in question) works perfectly when using my iPhone
to record. I'm using
Thanks. I often have to move the wires around, which is why I thought
a new wire might solve the trick. However, I can't get a completely
non-existent buzz without holding the middle of it up in the air,
which obviously isn't feasible. I just find it odd that it does it
with the digital radio
Did you consider trying a clean box or hum filter like you would use with
guitar amplifiers?
You run it into your mixer and plug your radio into that! Art and Behrenger
make them. I was going to say you could get an isolation ground loop filter
from Radio Shack but they aren't in business any
The amplifier in the radio is still analog. it sounds to me like you have a
ground loop of some kind in the radio or your mixer
-Original Message-
From: Danny Miles
Sent: Tuesday, August 29, 2017 8:18 AM
To: PC Audio Discussion List
Subject: Issue with Buzz in Radio Recordings
Hi.
If you seem to not get this buzz as you put it when you are recording whatever
from your iPhone, it must be something specifically with either the digital
radio or some routing of the cables involved. Try moving the cables around and
see what comes of it because sometimes certain cables
Sounds like a cable with to thin screening perhaps? Many of the cables you get
nowadays have very thin screening.
André
-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Gary
Schindler
Sent: Tuesday, August 29, 2017 4:25 PM
To: PC Audio Discussion
