Hi, in GEM the object pix_film delivers a bang when the last frame is
reproduced,
when the movie ends bang to [1 ( and starts the others videos...also you
can bang a zero and stop the current movie.
Bets regards
José
2011/5/20 Ignacio Aguirre igna...@independiente.cl
Hello all
im
Hi...¿Kernel? ... probablemente debas compilar un kernel de baja
latencia...tiene poca ram y un procesador pequeño, igual debería
funcionar...
Maybe you could compile a low latency kernel... your processor is slow, but
must go on... check the latency...
Why you use Xubuntu??? try Ubuntu... i
Yes, but connected in PWM, imhe...working like a Dimmer...
Best regards
José
2011/4/12 Antonio Roberts anto...@hellocatfood.com
I've followed the instructions on this post and have successfully
gotten Pure Data to control some LEDs on my Arduino
Yes, Pduino...great work!, Ant: if you have problems i can send the patch
for your pourpose...
Best
José
2011/4/13 Hans-Christoph Steiner h...@at.or.at
Definitely. The easiest way is probably to use Pduino:
http://at.or.at/hans/pd/Pduino-0.5beta8.zip
On Apr 12, 2011, at 6:07 PM,
Hi, maybe you must change in the Arduino IDE the baud to comunicate...in
Arduino terminal...
in the tabs to upload, run,stop, etc, find the last (on right) which
corresponds to terminal, open it and setup the baud of Arduino, do not quite
understand what you say, but might work.
Check the pic
Yes, and then upload your serial sketch or whatever.
José
2011/4/13 Jose Luis Santorcuato santorcuat...@gmail.com
Hi, maybe you must change in the Arduino IDE the baud to comunicate...in
Arduino terminal...
in the tabs to upload, run,stop, etc, find the last (on right) which
corresponds
Hello, you want to synchronize or to apply the same tempo all the audio
samples? if you want to synchronize only enough each audio last as long as
your movieand are akin triggered in unison.
If you want more control without firing utulizar Gem playback and review
the frames with the scrubbing it
Hello list, so everybody goes? inquire about their experiencesthan I need
for devices will run on pure data, mac osx. withKinect. Adapter? , the box
comes with USB adapter?, OtherThings? I just want to buy the xbox Kinect not
mow.
I've been reading the forums and there from people who say usewith
Thanks Phillipe Torrow ill buy one.
Best regards
José
2011/4/7 philippe boisnard philem...@mac.com
hello
Hello list, so everybody goes? inquire about their experiencesthan I need
for devices will run on pure data, mac osx. withKinect. Adapter? , the box
comes with USB adapter?
yes, with
Hi Phil, the promised... my patch for work with korg padkontrol, easy to
use, and very simple.
Best
José
2011/3/25 Charles Goyard c...@fsck.fr
Hi Phil,
Phil Stone wrote:
Thanks for the suggestion, and for further clarifying (in my mind)
what I'll need. I think readsf~ won't do because
Hi, yes, i am worked with midi controllers for video, i can send the patch
at night, maybe you could use for your porpouse.
Best regards
Josè
2011/3/24 Phil Stone pkst...@ucdavis.edu
OK, this was probably too broad a way to pose this. Let me try it this way:
I'm not concerned with looping,
Hahahaha, video and sound...Cinematic...
Best
José
2011/3/24 Jose Luis Santorcuato santorcuat...@gmail.com
Hi, yes, i am worked with midi controllers for video, i can send the patch
at night, maybe you could use for your porpouse.
Best regards
Josè
2011/3/24 Phil Stone pkst
Cool...congratulations...ill test at wiken(only for windows?...i just
saw the image)...
Best
José
2011/3/24 Mr. Caucasian contactcaucas...@gmail.com
Hallo,
I'm happy to announce 5th release of VisualTracker - modular sequencer
environment with graphical timeline, track output
Hi, A brief summary Mathieu ... I appreciate every day of this
community ... and of course, we are pd ...
Beeest regards
José
2011/3/9 Mathieu Bouchard ma...@artengine.ca:
On Tue, 8 Mar 2011, Pierre Massat wrote:
I was trying to get Ardour to work last night and i came
Hi, A couple of years brought to Chile to Richard Stallman, I
participated in some way with GNU and I realized that most developers
live lectures and workshops, of their works.
The option to donate is very good, although I do not think it should
be sufficient to engage only the development, most
Hi List, good topic, the truth is right and necessary pduino thankful
for, here in Chile we have developed nice projects, artistic and
educational level, maximizing Arduino.
Also tell them that I am preparing a small book-manual Arduino
programming in Spanish.
Thanks again.
José
2011/3/4
;)
Yes, maybe on April...
Best
José
2011/3/4 Hans-Christoph Steiner h...@at.or.at:
That's great to hear, definitely post your book here once you have something
to share!
.hc
On Mar 4, 2011, at 12:18 PM, Jose Luis Santorcuato wrote:
Hi List, good topic, the truth is right
Hi, test here
http://sourceforge.net/projects/pure-data/files/
Current and old releases
Best regards
José
2011/3/4 Pierre Massat pimas...@gmail.com:
Hi list, why has the Download folder disapeared from the menu in
puredata.info? It's there if you come from google and search for the
Hi Andrew, I have not worked with mp3, but I've done something similar
with susloop ~, may solve some, help is quite clear.
Best regards
José
2011/3/3 Andrew Faraday jbtur...@hotmail.com:
Hey Guys
I've had a vague Idea (which I find is often the best kind) for something to
do with pure data.
OMG...Cool ill test and comment...
Congratulations!
José
2011/2/24 Pedro Lopes pedro.lo...@ist.utl.pt:
Congratulations, the array of Ps3eye (so it seems) cameras is amazingly
simple and has a nice result in panoramic rendering/blending. Love the cave
effect generated there.
HI Mathieubeautiful work...nice
Whats objects to use?
José
2011/2/10 Mathieu Bouchard ma...@artengine.ca:
http://gridflow.ca/gallery/lena_relief_1.avi
___
| Mathieu Bouchard tél: +1.514.383.3801 Villeray,
Yes, thanks a lot, great jobreminded me jobs Modul8
(Sorry I am a Blind... working on netbook)
Best
JOsé
2011/2/11 Mathieu Bouchard ma
t...@artengine.ca:
On Fri, 11 Feb 2011, Jose Luis Santorcuato wrote:
HI Mathieubeautiful work...nice
Whats objects to use?
I don't understand
Hi Cyrille, in my blog there are plenty of videos, some better than
others, you can download and make a mix if you wish.
Pd alone, Pd Processing, Wii, Tracking, Physical interfaces
http://www.youtube.com/watch?v=A94_tHq15uE
http://www.youtube.com/watch?v=tn9EQg_-31U
You can replicate the experience, lessons, send the work to different
places ... otherwise restricts the knowledge.
José
2011/2/8 Tedb0t li...@liminastudio.com:
$$
On Feb 8, 2011, at 9:49 AM, hghoyer wrote:
Dear all,
I will start a interactive Sound Project with some
into a nice flashy video.
.hc
On Feb 8, 2011, at 11:21 AM, Jose Luis Santorcuato wrote:
Hi Cyrille, in my blog there are plenty of videos, some better than
others, you can download and make a mix if you wish.
Pd alone, Pd Processing, Wii, Tracking, Physical interfaces
http
... the reverb continous with the sound
Greetings
José
2011/2/8 Jack j...@rybn.org:
Le mardi 08 février 2011 à 13:21 -0300, Jose Luis Santorcuato a écrit :
Hi Cyrille, in my blog there are plenty of videos, some better than
others, you can download and make a mix if you wish.
Pd alone, Pd
HI. in my experience in Linux if your machine is relatively new you
should replace the object v4l by v4l2, if you're on osx change the
same for pdp_ieee1394-
Pdp works very fine
Bet regards
José
2011/1/31 Matteo Sisti Sette matteosistise...@gmail.com:
Hi,
I just downloaded Pd-Extended
In osx remeber open first x11 before open the patch with pdp objects...
José
2011/1/31 Jose Luis Santorcuato santorcuat...@gmail.com:
HI. in my experience in Linux if your machine is relatively new you
should replace the object v4l by v4l2, if you're on osx change the
same for pdp_ieee1394
ALso you can check your cam /dev/video0 or /dev/video1... but i
think the v4l is the problem, please change to v4l2...
Best
José
2011/1/31 Jose Luis Santorcuato santorcuat...@gmail.com:
In osx remeber open first x11 before open the patch with pdp objects...
José
2011/1/31 Jose Luis
Sure, in the page of project:
http://ydegoyon.free.fr/pidip.html
Best
José
2011/1/31 Matteo Sisti Sette matteosistise...@gmail.com:
On 01/31/2011 03:03 PM, Jose Luis Santorcuato wrote:
HI. in my experience in Linux if your machine is relatively new you
should replace the object v4l by v4l2
you install
the proprietary nvidia-drivers?)
Also could you provide a basic example patch? Or try this one here:
http://az.zankapfel.org/?p=72
mrks
On 21.01.2011 13:47, Jose Luis Santorcuato wrote:
Yeah, sure, I tried cheese, and perfectly captures, even disable gdm
to work only in text
Hi, is included in the latest version of pd, the v4l1 this work only
with old webcams, I use the v4l2 with all ubuntus since 9.04...and osx
Best
Josè
2011/1/14 Daniel Roviriego daniferna...@gmail.com:
Hi All.
I have been reading about this object (in the videojack discussion..) and I
could
Hi, As Cyrille says a good choice is the wii and its accelerometer,
you can even hack and reduce weight and dimensions, the three-axis
accelerometer or sensor flex not recommend to you, take away the
freedom to be wired.
I heard that the camera play 3 works very well for tracking, even I
could
HI, Maybe LMMS,is like FL or Reason...
Audacity, Ardour...
BR
José
2011/1/8 Pagano, Patrick p...@digitalworlds.ufl.edu:
ardour
ceclia
zsynaddsubfx
audacity
hydrogen
From: pd-list-boun...@iem.at [pd-list-boun...@iem.at] On Behalf Of João Pais
Hi, I think in my humble opinion is the worst kinekt ... interactivity
is not achieved suam reagent, the other day I saw the kids playing and
seemed automata, emotionless, worried - robotic, incredible.
I have consulted many times this same issue and there are several ways
to fix it, many
If yo can not solve i can help you
JOsé
2011/1/7 Jose Luis Santorcuato santorcuat...@gmail.com:
Hi, I think in my humble opinion is the worst kinekt ... interactivity
is not achieved suam reagent, the other day I saw the kids playing and
seemed automata, emotionless, worried - robotic
Hello list, along with wish you a happy new year, I wonder if pd is
available for 64-bit ubuntu, I remember once downloaded from the Hans
website, is not in the pd site ... why?.
Would like to install a new computer ...
Best regards
José
--
http://arselectronicachile.blogspot.com
From: pd-list-boun...@iem.at [pd-list-boun...@iem.at] On Behalf Of Pagano,
Patrick [...@digitalworlds.ufl.edu]
Sent: Thursday, December 30, 2010 8:27 AM
To: Jose Luis Santorcuato; PD List
Subject: Re: [PD] pidip error color mode
switch to 1
From
Hi all, I am working with the library PiDiP, I have previously worked
with osx and linux ubuntu, had worked with the netbook acer and had no
problems, but now I get the following error when trying to open the
video window (i want to show a live video from webcam, easy in olds
projects):
pdp_v4l2:
Yes, i used that...maybe i dont considered v4l2ill try and comment...
Thanks
José
2010/12/29 Bastiaan van den Berg b...@spacedout.nl:
On Wed, Dec 29, 2010 at 14:11, Jose Luis Santorcuato
santorcuat...@gmail.com wrote:
Hi all, I am working with the library PiDiP, I have previously worked
?, the previous problem was that the camera was
not supported. I can speed up the fps? ...
Regards
José
2010/12/29 Bastiaan van den Berg b...@spacedout.nl:
On Wed, Dec 29, 2010 at 14:11, Jose Luis Santorcuato
santorcuat...@gmail.com wrote:
Hi all, I am working with the library PiDiP, I have
Hello list, everything works, now I wondered if it was possible to
change the size of the catch, I have a camera that captures from 640
to 1024, but low fps, I would like to capture at 30 fps and 640, catch
smaller setear possible dimensions? with pdp_scale suffice?
Best regards
José
--
Hello list, everything works, now I wondered if it was possible to
change the size of the catch, I have a camera that captures from 640
to 1024, but low fps, I would like to capture at 30 fps and 640, if
the capture is small I can run at 30 fps, you can adjust the
dimensions? with pdp_scale
Hi, this is strange because usually programs like blender,processing,
max work with this protocol, we want to send from a hardware or
software ?, if you send from hard enough that the output change to osc
... say what you want to connect and possibly send you the programming
Best regards
José
Hello list, I wondered if there was any object as umenu or ubumenu , i
know, I can make lists but would like something faster ... Greetings!!
José (the snorer)
--
http://arselectronicachile.blogspot.com
http://comunicacionnativa.blogspot.com/
http://www.myspace.com/santorcuato
Thanks Hans...ill try...
José
2010/12/18 Hans-Christoph Steiner h...@at.or.at:
If you want a popup menu, you probably want [popup].
.hc
On Dec 18, 2010, at 11:45 AM, Jose Luis Santorcuato wrote:
Hello list, I wondered if there was any object as umenu or ubumenu , i
know, I can make
Hi Hans, thanks a lot, solved...
Works fine!
José
2010/12/18 Jose Luis Santorcuato santorcuat...@gmail.com:
Thanks Hans...ill try...
José
2010/12/18 Hans-Christoph Steiner h...@at.or.at:
If you want a popup menu, you probably want [popup].
.hc
On Dec 18, 2010, at 11:45 AM, Jose Luis
=)
Thanks friends
Best regards from Chile
José
2010/12/18 Ivica Ico Bukvic i...@vt.edu:
Speaking of which, where does the release tree live in terms of SVN
checkout? Also, any idea why iemlib/popup.pd is not working? Is this a
defunct object? It is looking for a pop object and that
Hi List, me again!, hahaha, I write query by some message or object
that allows me to go to a website without having to leave pd, just
bang and open the browser or a popup in pd ... maybe Yves library?,
any alternative?
Best regards
José
--
http://arselectronicachile.blogspot.com
Hi Ed! Beautifulcode art!
José
2010/12/17 Ed Kelly morph_2...@yahoo.co.uk
Here's an Xmas teaser...
More info: http://sharktracks.co.uk
Ed
Metastudio 4 for Pure Data - coming soon!
Metastudio 3 still available at http://sharktracks.co.uk/puredata
Hello list, I'm working on a project with a snow leopard mac and pd
0.41.4, I have attached a card m audio mobile pre, but when the
setpoints to be the pd audio hardware this fall, before I had no these
problems is the first time, even in ubuntu could do it.
This happens several times, usually if
Hi Chris, only works on 0.43?
Best regards
José
2010/12/13 Chris McCormick ch...@mccormick.cx:
Hello PdPartyAnimals,
I am super excited to announce the early release of an abstraction for pd0.43
that I have been working on. It's called [netro] and it is like a [metro]
which
attempts to
show my work transitos... hypermedia...net art and
installation... hurra
2010/12/13 Mathieu Bouchard ma...@artengine.ca:
On Wed, 8 Dec 2010, Jose Luis Santorcuato wrote:
Gridflow have also recommended, but still can not quite decipher the code.
What can I answer to this ?
(Can you ask
of the first screen.
D.
On 12/7/10 10:33 PM, Jose Luis Santorcuato wrote:
Hi list, I am more active than usual, a question: when we use the dimen
message can determine the dimensions of our GEM screen, when using
border 0 is possible to eliminate the edge or tab GEM, but we can not
move that window
be done easily in GEM with a combination of
[pix-background] to create a histrogram showing only changed pixel
values, and [pix_blob] to track the center of gravity of those changed
values.
D.
On 12/7/10 6:43 PM, Jose Luis Santorcuato wrote:
I don't quite understand why people do motion
value.
++
Jack
Le mercredi 08 décembre 2010 à 21:56 -0300, Jose Luis Santorcuato a
écrit :
Hi list, Hi Hans, I really liked using pdp_mgrid why I allowed to
follow each of the points that I requested, even could make
conditional for each of the points of intersection, not only on an
axis
Yes, the system send a non custom inviteautomatically send... clearly
invasive... excuse me friends...we are friends beyond linkedin.
Best regards
José
2010/11/30 David dfket...@gmail.com:
Recently, LinkedIn has been targeted by spammers or phishers. I've
received emails with hot links
Hi list!, PiDiP In my humble opinion is a great tool for video work, a
complement to or Gem or Gridflow and actually doing would be a shame
to stay out of pd extended.
I like the possibilities of interaction and partnership with OpenCV
... is a penalty if it is not in pd, but is also addressing
2010/12/7 Mathieu Bouchard ma...@artengine.ca:
On Tue, 7 Dec 2010, Jose Luis Santorcuato wrote:
Yes, the system send a non custom inviteautomatically send... clearly
invasive... excuse me friends...we are friends beyond linkedin.
How automatic was it ? Can you describe how it happened
I don't quite understand why people do motion detection with squares like
that. I use a generic motion detection that gets me the centre of the
motion, and then when I rescale the values, it may split the possible
results into bands or squares because of rounding (if I quantise them).
Hi all!,
Hi list, I am more active than usual, a question: when we use the dimen
message can determine the dimensions of our GEM screen, when using border 0
is possible to eliminate the edge or tab GEM, but we can not move that
window, for example, we cant move to a projector ... it is possible?
Best
Dear list, working with my students came up with the questions about
an object that can modify a map or projection, that is, adjust the
projection points to a particular object, such a projection map to a
bottle or car for example.
Maybe Gem? Maybe Pidip?
Best regards
José
--
Yes... works...funny! thanks a lot dear list.
José
2010/12/6 Max abonneme...@revolwear.com:
http://lists.puredata.info/pipermail/pd-list/2010-03/077319.html
Am 06.12.2010 um 21:46 schrieb Jose Luis Santorcuato:
Dear list, working with my students came up with the questions about
an object
Hi list... a big issue, however ... PiDiP remain in extended pd libraries?
Best regards
José
2010/12/5 Hans-Christoph Steiner h...@at.or.at
berlios is based in Germany, but I think they have similar restrictions on
the license.
.hc
On Dec 5, 2010, at 2:50 PM, ydego...@gmail.com wrote:
Hi, i connected pd with arduino and adxl330, works fine, in order to
wireless i prefer arduino bluetooth, the only thing to do is change the baud
for default the in firmata is 57600, in my experience only works if you
change to 115200 (in the standard firmata arduino sketch,and the arduino
Maybe you can create a Helmet...or Hat...cool...then the wire is not a a
problem, also you can hack the wii and select the internal parts to reduce
the weight.
Best regards
José
2010/12/1 Pedro Lopes pedro.lo...@ist.utl.pt
Nothing a sensor check would not prevent. Its like sound check =P
Dear List: Friday 3 December at Pacific University is hosting a meeting of
music and sound art by Alexander Porres, a prominent Brazilian artist who
submitted patches and Pure Data manual in Portuguese, which is working to
translate into Spanish .
Attendees only need to bring their laptop
OMG...nice!
José
2010/11/23 chrism ch...@mccormick.cx
On Fri, 29 Oct 2010 00:15:45 -0400 (EDT), Mathieu Bouchard
ma...@artengine.ca wrote:
Got GridFlow on Android working, with no options at all.
Cool!
Therefore,
[#out window] does not work, and there's no other form of window
Hi, great...working with a specific version of android? (yes, i dont read
the link).
Best regards
José
2010/11/19 chrism ch...@mccormick.cx
On Fri, 19 Nov 2010 21:38:36 +1100, Richie Cyngler
glitch...@gmail.com wrote:
Could it be used to make web apps too?
I guess it depends what you
Thanks, all suggest works... maybe i make a one trigger tutorial...hahaha.
Thanks a lot brothers
José
2010/11/15 IOhannes m zmoelnig zmoel...@iem.at
On 2010-11-14 03:26, Ed Kelly wrote:
Or...
[bang(
|
| /-[0(
[spigot 1] |
|\ |
| \-|
|
Hi List!, I use Linux Ubuntu 9.04, test 9.10 and 10.04... i prefer ubuntu
for ease and support, is confortable for replicate experiences in the
educational field. You can compile the low latency Kernel, and the
aplications are good.
Best regards
José
2010/11/14 cyrille henry c...@chnry.net
(the snorer?)
2010/11/13 Mathieu Bouchard ma...@artengine.ca
On Fri, 12 Nov 2010, Jose Luis Santorcuato wrote:
I think like a sequence, i dont like a jumpcut,
I don't understand what you mean.
only bang, only event, if are many bangs only receive the first, others
lock after the event
?
Metastudio 4 for Pure Data - coming soon!
Metastudio 3 still available at http://sharktracks.co.uk/puredata
- Original Message
From: Mathieu Bouchard ma...@artengine.ca
To: Jose Luis Santorcuato santorcuat...@gmail.com
Cc: PD List pd-list@iem.at; cyrille henry c...@chnry.net
Sent: Sat, 13
Hi all, I'm working for a long time to solve the multiple bangs that
sometimes I throw some devices, I tested debounce, edge, but I can not
control the multiplicity of bangs or Toogle, I can retard or miss one, send
it to the right ( edge) but I can not control multiple bangs or toggle.
Any ideas?
I need receive only one bang of these multiples, the first...
Best to alls
José
2010/11/12 Jose Luis Santorcuato santorcuat...@gmail.com
Hi all, I'm working for a long time to solve the multiple bangs that
sometimes I throw some devices, I tested debounce, edge, but I can not
control
.
Thanks again friends
José
Escuchar
Leer fonéticamente
2010/11/12 Mathieu Bouchard ma...@artengine.ca
On Fri, 12 Nov 2010, Jose Luis Santorcuato wrote:
Hi all, I'm working for a long time to solve the multiple bangs that
sometimes I throw some devices, I tested debounce, edge, but I can
Yes, but one shot lock all the nexts bangs...wrong?
Saludos de acá Mirko!
José
2010/11/12 Mirko Petrovich mirko.petrov...@gmail.com
hola Jose,
something like [oneshot] ?
saludos
Mirko
On Fri, Nov 12, 2010 at 10:06 PM, Jose Luis Santorcuato
santorcuat...@gmail.com wrote:
Hi Cyrille
I think like a sequence, i dont like a jumpcut, only bang, only event, if
are many bangs only receive the first, others lock after the event end, and
then activate again.
Regards
José
2010/11/12 Jose Luis Santorcuato santorcuat...@gmail.com
Yes, but one shot lock all the nexts bangs...wrong
When the events grow...
BR
José
2010/11/12 Jose Luis Santorcuato santorcuat...@gmail.com
I think like a sequence, i dont like a jumpcut, only bang, only event, if
are many bangs only receive the first, others lock after the event end, and
then activate again.
Regards
José
2010/11/12
Yes, work, just need adjust the right inlet... thanks Mirko!, really...
Best regards list
José
2010/11/12 Jose Luis Santorcuato santorcuat...@gmail.com
When the events grow...
BR
José
2010/11/12 Jose Luis Santorcuato santorcuat...@gmail.com
I think like a sequence, i dont like
Hi all, I'm working some time ago to open cv (Hangar), but I can not get the
darwin pix_opencvsurf object does not come in the installer for both linux
and mac osx, any ideas?
Best regards
José
--
http://arselectronicachile.blogspot.com
http://comunicacionnativa.blogspot.com/
Hi, is posible but that computer is too slow, and graphic card is...
terrible...
Audio and video in this computer maybe crashes... you could test a more
robust computer.
Best regards
José
2010/11/10 Felix Obée fe...@amphibiousthoughts.com
hi together,
i want to use pd on linux with a small
Well i tested opencv with ubuntu 9.04 and .deb, works very fine, maybe you
can try with .deb...in the open cv Hangar site.
I tested in Os x 10.5.8 and works, in snow leopard i installed Pd 0.4.1.4...
not working with Snow Leopard release cv (IME)...Works with old Pd.
Hi, Search in torrents Learning Open CVOreilly media... the Pd OCV
reserch is based in this book...
Best regards
José
2010/10/28 Claude Heiland-Allen claudiusmaxi...@goto10.org
On 28/10/10 17:39, Philip Cunningham wrote:
Hello list,
I wonder if there are any tutorials available on how
Hi, Maybe adjust de baud rate
Best regards
José
2010/10/25 Dafydd Hughes dafyd...@gmail.com
Hey folks
I feel like an idiot. I'm trying to get a rotary encoder to send data to Pd
- I have the arduino end working fine, but I'm getting a bunch of ascii
numbers coming out of [comport].
Thanks Mathieureally... thanks for share..
Best regards
José
2010/10/23 Mathieu Bouchard ma...@artengine.ca
This is a late posting about the 9.12 release of GridFlow which was
finished two weeks ago. Note that the Ubuntu packages are now made by Claude
instead of Patrick, and it's
+1 how???
José
2010/10/19 John Harrison johnharrison...@gmail.com
how was this solved?
On Tue, Oct 19, 2010 at 8:30 AM, alessandro contini
aless.cont...@gmail.com wrote:
solved.
thanks a lot anyway.
--
http://arselectronicachile.blogspot.com
http://www.myspace.com/santorcuato
HI, I have no arduino one hand, you could try installing the latest Arduino
IDE, is for the UNO plate.
I noticed that in 2.1 are defined Firmat chipset ATMEGA xxx in the file
named firmata.h chipsets there are defined outputs and inputs, not sure, but
could include a chip or model, remember that
Ooops, the firmata.h is in the pduino/firmata...
Best regards
José
2010/10/19 Jose Luis Santorcuato santorcuat...@gmail.com
HI, I have no arduino one hand, you could try installing the latest
Arduino IDE, is for the UNO plate.
I noticed that in 2.1 are defined Firmat chipset ATMEGA xxx
Yes. i have the same processor, atom 1.6 and 1 gb ram 160 hd... working for
workshops or examples not for hard work...
Best regards
José
2010/10/3 Ivica Ico Bukvic i...@vt.edu
FWIW L2Ork (http://l2ork.music.vt.edu) runs entirely on MSI Wind U100
netbooks with Atom processors. Everything
Maybe... when i work with video and audio pd starts to become slow, not
always but...with arduino same things happens, of course... with a lot of
videos and audio samples hehehehe.
I work with a Santa Rosa Macbook, Intel Core 2 Duo... 2gb Ram...a misery of
computerthe graphic card is a
Hi friends...My experience with Pure Data in Windows is terrible,
unfortunately here in South America does not dare to implement at the
Universities Unix systems ... is sad that in trying to integrate systems
such as PD, Arduino and Processing is very slow ... falls and crashes ...
doing very well
Max has always offered the possibility of downloading free but a 30-day
license, which is that crack, I think it means little, it's like when
windows 7 is liberated, we humbly think we use pd for two reasons: the
potential and an ethical issue, it would be a bad move create or teaching
max and
Jones, there are plenty of examples, if you go to help find helpful browser,
there are libraries that help you work in bars, or other music stuff, even
with a more nice interface, I recommend the library moonlib, Help / browser
/ reference/moonlib and Help/browser/ reference/Unauthorized library
which pd forum are you talking about ?
+1
José
2010/9/10 Mathieu Bouchard ma...@artengine.ca
On Fri, 10 Sep 2010, jm jones wrote:
Max forums seems more active than the pd, I hope this list is more active
: )
which pd forum are you talking about ?
This is certainly news, well I write to the list, is a good place to share
and ask ... Welcome and good luck!
Bienvenido!
José
2010/9/12 mik mpr...@skynet.be
Jose Luis Santorcuato schreef:
which pd forum are you talking about ?
+1
Probably this one: http://puredata.hurleur.com/
m
Hahahaha, ok... was for Jones...
Anyway you can find material on the website of Miller, I think there are
also a couple of books
probably in torrents. Cyrille papers are good and the Hangar, also Mathieu,
jobs Gem introductory
course are not music, but will open doors.
I leave you greetings and
Of course... work very nice in Linux and Mac osx...hehehehe
Best regards
José
2010/9/6 Jose Luis Santorcuato santorcuat...@gmail.com
Friends, I've done, installing on mac osx 10.5.8 gridflow and the latest
official version of Pure Data, I did well in Ubuntu Linux ... the problem
Friends, I've done, installing on mac osx 10.5.8 gridflow and the latest
official version of Pure Data, I did well in Ubuntu Linux ... the problem is
that I tried to make the path from the gui should be done from
org.puredata.pd.plist file and then copy the files and create the folder PD
...then
... and terminal says: error not openthe other patchs
works fine... great work...congrats
Best regards
José
2010/9/6 Mathieu Bouchard ma...@artengine.ca
On Mon, 6 Sep 2010, Mathieu Bouchard wrote:
On Mon, 6 Sep 2010, Jose Luis Santorcuato wrote:
the problem is that I tried to make the path
1 - 100 of 239 matches
Mail list logo