The easiest way to cut those magnets is with a scissors or a paper cutter.
Jim K
- Original Message -
From: "Murray"
To:
Sent: Saturday, December 22, 2001 2:33 PM
Subject: [pinhole-discussion] magnet in ferrous can
> And use a polymer (plastic) magnet, like the kind business cards are
Murray,
Yes, black ABS is the best way to go. You can order a length of it from any
ACE hardware store. A ten foot section cost me 9.95 last week.
Jim K
- Original Message -
From: "Murray"
To:
Sent: Saturday, December 22, 2001 2:33 PM
Subject: [pinhole-discussion] magnet in ferrous ca
Hey Lukasz! welcome to the list...
Here are a couple of ideas to add:
Use CLEAR TAPE to hold the paper in place. This lets the light through and you
don't get those white patches on the negatives. It works great with RC paper
but you have to be careful when taking it off as it could rip the emul
Hi Leezy,
My current roll of tape is labeled "painter's masking tape." I've
used it around door and window trim when painting house interiors; I
believe auto painters use it also. I've never heard it refered to as
drafting tape, although they may both be the same thing.
Tom
(Actually, this rol
love to have a copy.
Happy Holidays.
lusi
What i meant was as close as i can get to small things, thus making them
larger. When you work at less than the "focal length" of the pinhole, the
image is sometimes more fuzzy. my closest closeup was with a camera I made
by drilling out the lens and shutter, then putting on a pinhole. I took a
"cl
Thank you very much. Your comments were very helpful. I think I'll use
magnets, because I want to use various paper sizes in the same camera. Once
again, thanks and Merry Xmas.
Łukasz
--
Tego nie znajdziesz w żadnym sklepie!
[ http://oferty.onet.pl ]
And use a polymer (plastic) magnet, like the kind business cards are
sometimes stuck to - they're flexible to conform to the curvature...I'll bet
you could cut it on a mat cutter (if you had access to one, anyway) with a
bevel.
I had a mega-size oatmeal container I used for a shipping container -
I really like the mat board strip idea - if you use a piece with the bevel
cut, you could glue it upside down (as a 'reverse bevel' would look on
framed artwork), so the bevel would be raised to 'catch' the film/paper.
Murray
- Original Message -
From: "ROGER ARMOUR"
> Subject : Ultra closeup photography.
> Bill Erickson in replying to Rachel Mallon's questionnaire mentioned ultra
> closeup pinhole photography. Please tell me what this means. What subject,
> how close, and how is it illuminated? I experimented
Hey, Jim!
We use them all winter, here in Canada! -;)
Guy
Kosinski Family wrote:
> The Russians used to make great lenses out of ice!
> Guess it all depends on your weather...
> Jim K
>
> - Original Message -
> From: "Uptown Gallery"
> To:
> Sent: Friday, December 21, 2001 2:04 AM
> S
In a message dated 12/22/01 1:03:00 PM, pen...@rogers.com writes:
<< I can almost smell the turkey!! and turkey again next day, and the turkey
sandwhich the day affter, and the the turkey soup and the turkey...on
and on and on!! >>
Ah, you're a man after my own heart!
Happy Holidays to ev
In a message dated 12/22/01 12:30:29 PM, twmil...@mr.net writes:
<< One that I use with paper negatives is to take a strip of high-quality
masking tape about 35 mm (1 1/2 inches) long roll it into a tube with the
sticking part on the outside. The tube will have a diameter of about 10mm.
Then
Subject : Ultra closeup photography.
Bill Erickson in replying to Rachel Mallon's questionnaire mentioned ultra
closeup pinhole photography. Please tell me what this means. What subject,
how close, and how is it illuminated? I experimented with photographing a
coin at diminishing distances obtainin
- Original Message -
From: "Tom Miller" twmil...@mr.net
>Another thing I've done with small can cameras is glue a strip of mat board
to the
>inside of the can on either side of where the paper should be. This was
with a
>cylinder camera using film for negatives and the force of the film w
In the message below, I meant to add that I put a tube of tape behind the top
corners of the photo paper.
There are a couple of methods I've used to hold the paper in place. One that
I use with paper negatives is to take a strip of high-quality masking tape
about 35 mm (1 1/2 inches) long rol
Hi Lukas,
There are a couple of methods I've used to hold the paper in place. One that I
use with paper negatives is to take a strip of high-quality masking tape about
35 mm (1 1/2 inches) long roll it into a tube with the sticking part on the
outside. The tube will have a diameter of about 1
I think he moved to France. He brought that camera in one day but I never
got a good look at it. I'd love to make one like the one that he had - the
photos that I saw were great! If I remember correctly it was basically the
same as a foamcore pinhole camera except that it had a paper lens turret
> A new book was mentioned on the alt photo list. It may cover what you are
> looking for,
>
> Primitive Photography A Guide to Making Cameras, Lenses, and Calotypes
> by Alan Greene ISBN 0240804619
>
> its published by focal press - see their web site
>
> Hmmm looked way to interesting - I
Thanks all replies - too lazy to reply individually
Murray
> Hi Ray,
>
> I sure agree with you and your approach. I do think though that there
are no 'standards' and the concept of editioning in photography is not
as straight forward as it is in printmaking.
>
> This means that there is a lot of confusion about it in photography,
and I continue to believe
Hi Ray,
I sure agree with you and your approach. I do think though that there are no
'standards' and the concept of editioning in photography is not as straight
forward as it is in printmaking.
This means that there is a lot of confusion about it in photography, and I
continue to believe that
Hi Alexis,
I'm interested too!
Joao
ragowaring wrote:
> Dear all
>
> I am scanning the chapter on making a quarter plate camera and will be able
> to send a copy to anyone interested.
>
> Get this, quote:
>
> In this chapter will be described how to make a quarter-plate folding hand
> or stand c
Dear all
I am scanning the chapter on making a quarter plate camera and will be able
to send a copy to anyone interested.
Get this, quote:
In this chapter will be described how to make a quarter-plate folding hand
or stand camera of a simple type, yet containing all necessary modern
movements a
Lukasz
What I do with the most basic cameras is allow about 1 to 2 mm on the edge
of the paper on two sides for attaching some tape and then sticking the
paper with the tape to the camera walls. You need only a small length of
tape. You can also use double sided tape but this has the disadvantag
Re: AW: [pinhole-discussion] loading paper into a cancameraThat's what I
thought until one day, having travelled a distance to take photos, instead
of images I found only dark round spots caused by the light hitting the
backside of the paper that had shifted enough to cover the hole...
-U
wow, i just put it in the can and close the lid. :) it always seems to
keep itself in place because of the curved wall.
From: "Markus Birsfelder"
Reply-To: pinhole-discussion@p at ???
List-Post: pinhole-discussion@pinhole.com
Date: Sat, 22 Dec 2001 07:57:12 +0100
To:
Subject: AW: [pinhole-
Hi Lukasz
To hold the paper in place, I glue two pieces of thick cardboard of about 2
cm2 to the inside of the can. I place one near the bottom and one near the
top, both in line with the pinhole. The paper I use is cut to the length of
the inner circumference of the can less 3-5 mm. This keeps it
28 matches
Mail list logo