Do *any* of these support *"browseonlineartist"*?? If not, then its not
a fair comparison.
"browseonlineartist" is a command defined by the Online Library plugin
in LMS8. No client should need to worry about what command is being
used, as long as it correctly calls it with the parameters
Gobuleberbu wrote:
> I just performed some tests. Using airfoil, i can replicate the
> behavior. The behavior is the same when I send audio output to the
> remoteHD airplay plugin.
>
> Airfoil has the ability to send audio to squeeze boxes/squeezelite.
> Behaves correctly on squeezelite.
>
Gobuleberbu wrote:
> Yeah, I increased the level to generate some data in the log, trying to
> replicate the issue. Your plugin is reacting as expected but the sound
> still jumps when I set it from 0 to 1 (-29.39). Perhaps the issue is
> with Shairport.
>
> Any idea how I could fix that?
I just performed some tests. Using airfoil, i can replicate the
behavior. The behavior is the same when I send audio output to the
remoteHD airplay plugin.
Airfoil has the ability to send audio to squeeze boxes/squeezelite.
Behaves correctly on squeezelite.
I guess I should just lower the
bakerboy wrote:
> I too have SBRs which play it fine. No DAC, and I'm afraid I don't know
> where resampling would be. I've seen a web page saying, "Resampling is
> not included in armv5te, armv6 and mips binaries..." so probably not.
> Thanks.
So the audio on your pi uses the default analog
Yeah, I increased the level to generate some data in the log, trying to
replicate the issue. Your plugin is reacting as expected but the sound
still jumps when I set it from 0 to 1 (-29.39). Perhaps the issue is
with Shairport.
Any idea how I could fix that?
I too have SBRs which play it fine. No DAC, and I'm afraid I don't know
where resampling would be. I've seen a web page saying, "Resampling is
not included in armv5te, armv6 and mips binaries..." so probably not.
Thanks.
philippe_44 wrote:
> The Bridge installs a web server on a random port from 49152 (can be
> configured), up to 32 ports, so your firewall must allow that. If
> everything seems to work but you have no sound, you propably have these
> ports blocked to the Chromcast player cannot get the audio.
Many thanks for pointing me in the right direction... have read most of
the thread, but my speaker only works on the outside WiFi and I've run
out of light before I got to the later posts in the thread. I think I'm
getting there, but as I'm not that technical, I suspect I may be asking
some
bakerboy wrote:
> Puzzling to me at least. My Raspberry Pi, Debian, Squeezelite
> (v1.9.2-1158) installation connects to a particular web stream (WKCR,
> http://wkcr.streamguys1.com:80/live MP3, 96kbps CBR) but produces no
> audio. This is a new problem, it used to be fine. My Squeezebox radios
philippe_44 wrote:
> No I dont think so. First you see some level at -72.60 which does
> not exist in AirPlay (-30 is the min) unless you have set the mapping to
> -90 as you did and second the timestamps in all logs are always the
> same, so I think you have copied the same log multiple times
Gobuleberbu wrote:
> Here : 30014
No I dont think so. First you see some level at -72.60 which does not
exist in AirPlay (-30 is the min) unless you have set the mapping to -90
as you did and second the timestamps in all logs is always the same, so
I think you have copied the same log multiple
Here : 30014
+---+
|Filename: raopbridge.txt |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=30014|
Puzzling to me at least. My Raspberry Pi, Debian, Squeezelite
(v1.9.2-1158) installation connects to a particular web stream (WKCR,
http://wkcr.streamguys1.com:80/live MP3, 96kbps CBR) but produces no
audio. This is a new problem, it used to be fine. My Squeezebox radios
have no problem. The
Gobuleberbu wrote:
> 30011
> Here we go!!
I don't think the volume mapping has been reset to default values
LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos
PLAY:3, PLAY:5, Marantz NR1603, JBL OnBeat, XBoxOne, XBMC, Foobar2000,
ShairPortW, JRiver 21, 2xChromecast Audio,
mherger wrote:
> > Well, what about adding the artist and title info that MAI receives
> to
> > the top of the lyrics? This way the user could easily spot false
> > positives.
>
> I had this at some point. But it looks odd in some places where we'd
> have that information right above the title
sveninndh wrote:
>
> I have already asked it several times, what is "browseonlineartist",
> what does it do?
>
FYI it is in the new 8.0 code - in the OnlineLibrary plugin
slimserver/Slim/Plugin/OnlineLibrary/BrowseArtist.pm
You won't find it being called from other skins yet because, I
30011
Here we go!!
+---+
|Filename: raopbridge.txt |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=30011|
cpd73 wrote:
> Really, please stop going round and round and round in circles. I have
> stated what I see this issue as - quite clearly, multiple times. What
> other clients do is up to them. But *your* code returns *type=text* for
> an *image*!
This is also not fair, because it is a result of
As said in #1 post, sync is not supported between CC and other LMS
devices. You must create a sync group WITHIN chromecast devices.
The for the COU consumption, how do launch the bridge and what is your
config file
LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos
PLAY:3,
Gobuleberbu wrote:
> 30006
> Here you go! Changing the mapping changes when the sound will start to
> be adjusted. When -90:0,-15:50,0:100, the sound ajustement will stop at
> 44 on the lms slider, sound output will be constant if I go lower.
Oops ... I need the bridge log, not the server
30006
Here you go! Changing the mapping changes when the sound will start to
be adjusted. When -90:0,-15:50,0:100, the sound ajustement will stop at
44 on the lms slider, sound output will be constant if I go lower.
+---+
Gobuleberbu wrote:
> I know, Ive tried everything. It never increases the volume
> progressively, 1% is already very high volume. Using mapping
> -90:0,-45:50,0:100 does not even solve it. It changes how it behaves,
> but there is always that step at the beginning of the curve. [emoji53]
>
I know, Ive tried everything. It never increases the volume
progressively, 1% is already very high volume. Using mapping
-90:0,-45:50,0:100 does not even solve it. It changes how it behaves,
but there is always that step at the beginning of the curve. [emoji53]
Software volume control does
Hello. I am using latest versions of both CastBridge plugin and LMS
(1.21.1 and 8.0.0~1586146269) on a Linux/Buster server. Generally, it
is working great. However, I have noticed that after I play music using
the plugin on cast devices, the plugin will continually cycle at 100% on
a single
sveninndh wrote:
>
> 1. Default Skin, *nowhere problems* with viewing artist photos
> 2. Squeezeplay, *nowhere problems* with viewing artist photos
> 3. Classic Skin, *nowhere problems* with viewing artist photos
>
Do *any* of these support *"browseonlineartist"*?? If not, then its not
a
While I was trying to reproduce the socket error thing, I got the
restart error again. :p I was offered to start a debugger, so I gave it
a shot. Maybe it's helpful? I really cannot say.
30002
+---+
|Filename: lms_slx_debug.png
Alright I wa afraid of that. No way to copy over the player press since
there has been done the most. Also the most settings available, lot of
screens to copy
*SqueezeBoxes:* 1x Transporter (Living room) 1x SB2 (shed), 1x Radio
(Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x
cpd73 wrote:
> At the risk of going round and round in circles... Your response has
> *TYPE* set to *TEXT*.
>
> >
Code:
> >
> {
> "params":[ "2c:fd:a1:bb:03:db",
> [
> "browseonlineartist",
> "items",
> "0",
> 25000,
> "item_id:5.5",
>
https://forums.slimdevices.com/showthread.php?107001-ANNOUNCE-SqueezeButtonPi-Tool-to-use-buttons-and-rotary-encoders-on-a-RPi=951438=1#post951438
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
No way to transfer from 3 to 6. Too much has changed on the pCP side.
Take some screen shots of 3, then set them in 6.
If just LMS settings, do what d6jg said
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
I got my 'Table' speaker out today and although it booted and connected
to WiFi it didn't register with LMS and there was no web interface on
the IP address.
So I have re-installed using PiCore Player v6.0.0 Real Time Kernel - set
up for my JustBoom Amp Zero hat, and it's all working fine,
edwin2006 wrote:
> Found it and oeps. The same place where I put in the cron job manual
> sync Ntp. So, also in pcp.x
>
> Now for q2, how to transfer entire config to fresh pcp 6 install?
It is possible to copy the prefs over and then remove the server ID from
the file on the new server but
paul- wrote:
> Copying the card is the easiest way.Don't think that will work from 3.x to 6.x
*SqueezeBoxes:* 1x Transporter (Living room) 1x SB2 (shed), 1x Radio
(Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x
piCorePlayer (Garden) 1x OSMC + Squeezelite (Movie room), 1x
Copying the card is the easiest way.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted)
if you
Found it and oeps. The same place where I put in the cron job manual
sync Ntp. So, also in pcp.x
Now for q2, how to transfer entire config to fresh pcp 6 install?
*SqueezeBoxes:* 1x Transporter (Living room) 1x SB2 (shed), 1x Radio
(Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi),
dolodobendan wrote:
> The problem does not occur all the time, but not only when
> auto-starting. I tried the log, but it seems to log the current session
> only. Also, the problem did not occur today after a reboot. That was
> with 2.6.7. The freshly arrived 2.6.8 starts without a hitch, too.
edwin2006 wrote:
> No kidding, so simple?
> Which pcp version is the screenshot?
The screenshot is 6.0.0RC1 but has been there since 4.0 I think
Jeff
*Players:* SliMP3,Squeezebox3 x3,Receiver,SqueezeLite-X,PiCorePlayer x3
*Server:* LMS Version: Latest Nightly on Centos 8.0 VM on ESXi
sveninndh wrote:
>
> >Why state the item is a text item if it is not?
>
> Because it is a text element and it is in code. It is a text element
> with an image at the beginning.
Fine, but you want to show a larger image when clicked => it is an image
with a title.
*Material debug:* 1.
No kidding, so simple?
Which pcp version is the screenshot?
*SqueezeBoxes:* 1x Transporter (Living room) 1x SB2 (shed), 1x Radio
(Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x
piCorePlayer (Garden) 1x OSMC + Squeezelite (Movie room), 1x Touch
(Study 2), few spare unit's
sveninndh wrote:
> I think you are wrong about my code or the code of the MusikArtistInfo
> plugin by Michael which is called here.
At the risk of going round and round in circles... Your response has
*TYPE* set to *TEXT*.
Code:
{
"params":[
edwin2006 wrote:
> Yesterday I noticed that spotty didn't work and this morning suddenly
> lms stopped entirely.
> There was more going on. Pi responded to ping but unable to open pcp GUI
> or open SSH session.
> Finally I pulled power plug and upon restart everything worked as
> before, yes
cpd73 wrote:
> And my response would be the same. The type is set to "text". Sorry, but
> I do not subscribe to any services - so I cannot check myself.
>
> Anyhow, I've just added a work-around for this. But, I still think there
> is an issue with your (or LMS's) code. Why state the item is a
Yesterday I noticed that spotty didn't work and this morning suddenly
lms stopped entirely.
There was more going on. Pi responded to ping but unable to open pcp GUI
or open SSH session.
Finally I pulled power plug and upon restart everything worked as
before, yes even spotty.
Conclusion,
the_bat wrote:
> Thanks. For some reason that version won't download. The counter
> decrements to 1 or 0 but nothing happens. The previous version (1198)
> does download however and is now working, so thanks very much indeed.
>
> Alan
1218 now downloading fine.
Thanks again.
Alan
45 matches
Mail list logo