After the update to v1.7.0 only about 25% of my artist images appear in
Artists on the Jivelite screen, (241 out of 951). No problems with album
coverart on the Jivelite screen.
With the new version MAI is using different URIs for the images. If you
haven't run a scan since the update your LMS
MarSOnEarth wrote:
> On the one hand, I see so much of new activity here, and on the other, I
> don't get to use that particular player that's hooked up to our Denon
> often, but now I tried it after quite a while, and the power on/off
> sequence no longer works. It all used to work quite
On the one hand, I see so much of new activity here, and on the other, I
don't get to use that particular player that's hooked up to our Denon
often, but now I tried it after quite a while, and the power on/off
sequence no longer works. It all used to work quite splendidly, zone2
on/off, quick
Thanks for all of these updates!
stereoptic's Profile: http://forums.slimdevices.com/member.php?userid=53162
View this thread: http://forums.slimdevices.com/showthread.php?t=112122
Similar to the issue in
https://forums.slimdevices.com/showthread.php?110697-Any-ideas-how-to-increase-the-volume-with-a-raspiaudio-device=raspiaudio,
I have installed a Raspiaudio Audio+ hat and am getting relatively
modest volume out of the hat's 3.5 jack even with the app volume turned
up to
rgdawson wrote:
> I'm using Material Skin now on a cheap little Android tablet which I'm
> using as a dedicated controller. On this device, (under Chrome) I have
> noticed that when in landscape (desktop) layout, using Spotty, that when
> I click on Search, the virtual keyboard blinks but
CodeChimp wrote:
> Thanks, that's useful to know.
> If that is the issue with Squeezer I'll change the method I set the icon
> in my plugin.
I'm not really sure at this point whether this is the best or the right
way to go. SBT only shows the icon on Squeezer - but not on Jive /
Jivelite
Hi I'm running a Raspberry Pi 4 4GB with an 800x480 touchscreen using
piCoreplayer 7.0.1 as server and player with LMS 8.2.0 - 1615827177 and
Jivelite installed via piCorePlayer.
After the update to v1.7.0 only about 25% of my artist images appear in
Artists on the Jivelite screen, (241 out of
Not sure where tot post this. DSTM works fine with Sugarcube but the
moment I change the DSTM setting to another option (Deezer or anything
else) Sugarcube remains active for DSTM. I checked the live page of
Sugarcube and it is still active serving songs. Only to way to stop
Sugarcube is by
bpa wrote:
> These streams need full mPEG-4 video & audio handling.
>
> The pLayhLS V2 implements MP3, ADTS, MPEG-2/MP3, MPEG2-AAC and
> MPEG2-Video handling
> I didn't implement MPEG4 as it was never used in any streams I found up
> to now.
>
> So this needs whole chunk of new code. I have
philippe_44 wrote:
> I'll investigate that, can you describe as precisely as possible a
> method to reproduce the problem1. Start a group player with everything set to
> 100%
2. Adjusting the group player volume should result in the same volume on
both the member players.
3. Stop the group
slartibartfast wrote:
> If I change the volume of the group player ( I know I shouldn't) before
> I start it playing that causes issues. I can cause a situation where all
> three volumes are 100% and everything looks normal but reducing the
> group volume has no effect on the two player volumes
madpatrick wrote:
> The plugin is working nicely and i learning every day how handle my new
> Denon Receiver.
>
> Is it possible to set the volume of the squeezebox at a fixed start
> level.
> Now my receiver is set to a start volume level and also the squeezebox,
> but this is too low at
Been back a few pages but cant find what Im looking for.
I have a feeling that not too long ago there was a change such that if
you had Qobuz set at 24/96 but tried to play on say an SB3 LMS would
transcode down to 24/48. Is this also applied to something like iPeng?
I have iOS device with
The plugin is working nicely and i learning every day how handle my new
Denon Receiver.
Is it possible to set the volume of the squeezebox at a fixed start
level.
Now my receiver is set to a start volume level and also the squeezebox,
but this is too low at start.
I like for example to set the
A related question, there doesn't seem to be the option for a group
player to fix the volume at 100%. Is there a reason for this?
coyrls's Profile: http://forums.slimdevices.com/member.php?userid=44253
View this thread:
philippe_44 wrote:
> No, it should not. Volume for each player is memorized independently of
> the volume of the player when it was standalone (except the very first
> time when the group is created)If I change the volume of the group player ( I
> know I shouldn't) before
I start it playing
philippe_44 wrote:
> No, it should not. Volume for each player is memorized independently of
> the volume of the player when it was standalone (except the very first
> time when the group is created)I have a group with a piCorePlayer and a Touch
> with both volumes set to
100% (but adjustable)
slartibartfast wrote:
> The Group Player volume is confusing as it is based on the player volume
> settings before the group is formed.
>
> Sent from my Pixel 3a using Tapatalk
No, it should not. Volume for each player is memorized independently of
the volume of the player when it was
cpd73 wrote:
> 'icon-id' is fine with Material. To enable mapping *all* Material
> requires is:
>
> > >
- Your main icon is named x_svg.png
- You have a monochrome SVG icon named x.svg in the -same- folder
> as x_svg.png
- Use x_svg.png as the app's icon
> > >
>
> (Obviously
CodeChimp wrote:
> That's interesting as it's a different method for how I set the icon,
> and may not work with the Material Skin alternative icon.
'icon-id' is fine with Material. To enable mapping *all* Material
requires is:
- Your main icon is named x_svg.png
- You have a monochrome
MichaelPr wrote:
> Hi Andrew,
>
> Thanks a lot for opening the issue with the Squeezer Developer. You are
> right it's a weird one... because with SDT it's exactly the opposite.
> The icon works with squeezer but not with using Jive/Jivelite. I already
> had a small look into the plugin but my
The community firmware 8.1 installed perfectly on Touch and Radio. I
really like the new options for Touch wallpaper.
Mysb doesn't show the radio update; the Touch doesn't appear at all.
This hasn't affected the radio apps however.
Is this normal behaviour?
SB Touch (Community firmware)
After last update (0.204.0), no more Squeezebox device are listed in
Airplay on iPhone nor Mac. All was working 'till now...
>From my log:
Code:
[21-03-16 17:53:11.9863]
Plugins::ShairTunes2W::Plugin::playerSubscriptionChange (319) request=client
new
CodeChimp wrote:
> Thanks Michael for the compliment.
>
> I'll certainly look into using ID's but I think Kodi isn't using the API
> but the custom HTSP protocol so things are different. In the meantime
> just renumber the channels which I'm sure you've worked that out!
> I've raised an issue
These streams need full mPEG-4 video & audio handling.
The pLayhLS V2 implements MP3, ADTS, MPEG-2/MP3, MPEG2-AAC and
MPEG2-Video handling
I didn't implement MPEG4 as it was never used in any streams I found up
to now.
So this needs whole chunk of new code. I have some MPEG-4 ftype audio
(no
Parsing the extra "#EXT-X" is the least of the problems. IT was easy to
handle.
There are codec issues now and something else I'm not sure of.
bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806
View this
FredFredrickson wrote:
> I'm not sure if anybody else has experienced this, and I haven't messed
> around with it long enough to know the exact behavior, but when using
> the groups plugin, I'm finding my squeezeboxen have the wrong volume
> quite a bit. Some times the volume is way down until
I'm not sure if anybody else has experienced this, and I haven't messed
around with it long enough to know the exact behavior, but when using
the groups plugin, I'm finding my squeezeboxen have the wrong volume
quite a bit. Some times the volume is way down until I touch the
interface and it
bpa wrote:
> I look into this and hope it is this simple bit and not also just a
> stepping stone onto another problem with the video stream and the
> "OPTIONS"
>
> I think this is the first stream of version 7 that has been tried. Most
> audio streams are older version of the HLS protocol -
The vast majority of my Spotify albums have been given the genre
Pop/Rock. Joni Mitchell, Leonard Cohen, Radiohead, Marillion and
Hawkwind all Pop/Rock. Only one album has been given Progressive but Big
Big Train and Riverside have the same genre as Enya.I still haven't
found Pink Floyd [emoji3]
The vast majority of my Spotify albums have been given the genre
Pop/Rock. Joni Mitchell, Leonard Cohen, Radiohead, Marillion and
Hawkwind all Pop/Rock. Only one album has been given Progressive but Big
Big Train and Riverside have the same genre as Enya.I still haven't
found Pink Floyd
zzzap wrote:
> Thanks, very informative!
>
> From 'slimserver-vendor/sox/buildme-linux.sh' I learn the following
> version are current for LM 8.1.1
>
> SOX=14.4.3
> FLAC=1.3.2
> OGG=1.3.3
> VORBIS=1.3.6
> OPUS=1.2.1
> OPUSFILE=0.11
> MAD=0.15.1b
> MAD_SUB="-8"
> WAVPACK=5.1.0
Remember these
slartibartfast wrote:
> And "Holidays" for Bob Dylan - Christmas In The Heart. I guess Spotify
> don't have a "Christmas" genre for reasons only they know.
>
> Sent from my Pixel 3a using Tapatalk
Politically incorrect to account for religious groups Slarti. It won't
be long before we won't
slartibartfast wrote:
> I have acquired a new Genre "Stage and Screen". The only album in there
> is John Lennon - Imagine [emoji1787]. This is from Spotify.
>
> Sent from my Pixel 3a using TapatalkAnd "Holidays" for Bob Dylan - Christmas
> In The Heart. I guess Spotify
don't have a
mherger wrote:
> I released v1.7.0:
>
> > > >
- Look up genre information for albums imported from online music
> services
- improve artist picture lookups to speed up the import process and
> optimize cache usage
> > >
>
> The genre lookup is particularly interesting if
mherger wrote:
> I released v1.7.0:
>
> ...
>
> Have fun!
It was great to read what has been changed and why.
I had fun when deleting the imgproxy.db and I did a complete rescan.
After that everything is working fine! No problems to find! Every
picture is matching!
Great work! Thank you
ralphy wrote:
> I've uploaded a 'new firmware build to sourceforge'
> (https://sourceforge.net/projects/lmsclients/files/squeezeos/) for
> testing.
>
> It is NOT available via the community firmware plugin at this time and
> will need to be manually installed.
>
> The build includes the fix
mherger wrote:
> I released v1.7.0:
>
> > > >
- Look up genre information for albums imported from online music
> services
- improve artist picture lookups to speed up the import process and
> optimize cache usage
> > >
>
> The genre lookup is particularly interesting if
The request to add a choice of album or track gain has been added to
librespot as detailed here
https://github.com/librespot-org/librespot/pull/573#ref-commit-71acb79
Would it be easy to update Spotty to include this?
I don't know/doubt it. First of all I'll have to catch up with recent
The way *favorites* are handled by LMS-lite has been changed. Under the
hood, if you asked for Favorite 'N', it used to call
["favorites","playlist","play","item_id:'+str(int(N) - 1)+'"] which is
fast but does not traverse nested favorites. On Squeezeboxes with a
display, it also led to a heart
Thanks. I have updated the NL translation (did not change the others).
Many thanks!
___
plugins mailing list
plugins@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/plugins
Which player? AirPlay speaker? I had the same issue (siAirnPlay Zipmini
2 as alarm), and still have it sometimes - but I have no idea when and
can not really reproduce it. So if it is an AirPlay speaker - not
related to Groupplayers
Cheers,
Rainer
FredFredrickson wrote:
> Not sure if this
FredFredrickson wrote:
> Not sure if this is addressed elsewhere, it's hard to use this forum's
> search tool.
>
> I set up a group and then set up an alarm on this group.
>
> For some reason, when the alarm went off, both players changed their
> volume- one of them to 100%.
>
> Is there a
bpa wrote:
> LMS 3rd party tools are handled through this
> https://github.com/Logitech/slimserver-vendor
>
> YOu can see any LMS specific patches etc.
Thanks, very informative!
>From 'slimserver-vendor/sox/buildme-linux.sh' I learn the following
version are current for LM 8.1.1
SOX=14.4.3
rgdawson wrote:
> would it be possible to allow clicking on the album art graphic to
> "expand now playing" just like the existing "expand now playing" button
> does?
Doe for 2.3.5
rgdawson wrote:
> On this device, (under Chrome) I have noticed that when in landscape
> (desktop) layout,
mherger wrote:
> I released v1.7.0:
>
> > > >
- Look up genre information for albums imported from online music
> services
- improve artist picture lookups to speed up the import process and
> optimize cache usage
> > >
>
> The genre lookup is particularly interesting if
zzzap wrote:
> Can I ask which version of SoX are packaged with LMS 8.1.1?
>
> On my RPi all files in the /usr/share/squeezeboxserver/Bin/arm-linux
> folder have timestamp Aug 3 2009.
LMS 3rd party tools are handled through this
https://github.com/Logitech/slimserver-vendor
YOu can see any
Can I ask which version of SoX are packaged with LMS 8.1.1?
On my RPi all files in the /usr/share/squeezeboxserver/Bin/arm-linux
folder have timestamp Aug 3 2009.
zzzap's Profile:
The request to add a choice of album or track gain has been added to
librespot as detailed here
https://github.com/librespot-org/librespot/pull/573#ref-commit-71acb79
Would it be easy to update Spotty to include this?
Sent from my Pixel 3a using Tapatalk
olivaar wrote:
> the url of the chunks isnt correct calculated.
> the code in ScanHLS.pm after line 187 assumes that the line after
> #EXTINF is the url.
> to correct this, you can ignore any lines start with "#" after #EXTINF
> till a line that starts without a #
>
> the url should something
Just stumbled upon SLX, to my shame I only found out about it yesterday.
Ran few quick sound tests and it sounds very promising. Thank you so
much for this.
There is only one problem, I cannot get Native DSD to work.
LMS is installed on a Synology DS214 NAS (armadaxp), latest version from
MichaelPr wrote:
> Hi Andrew,
>
> because of remove icon mapping in MaterialSkin, I became aware of your
> plugin - using TVHeadEnd and LMS since many years now I added my DVB-C
> Radio channels manually to favorites like:
>
I released v1.7.0:
- Look up genre information for albums imported from online music
services
- improve artist picture lookups to speed up the import process and
optimize cache usage
The genre lookup is particularly interesting if you're importing Spotify
or TIDAL libraries, as
Wigster wrote:
> Hi
>
> I am running Spotty 4.4.8 on LMS 8.1.1 on Windows Server 2012R2.
>
> Spotify through LMS works ok.
>
> Spotify connect has stopped working for some reason a few weeks ago. No
> Connect devices are visible in the Spotify apps on the network. I do not
> have "don't
55 matches
Mail list logo