Hi,
I tried to make spotify connect work but with no success. It's ok for
accessing spotify from lms interface or a squeezebox.
My lms (7.9.1) runs on a debian jessie virtual machine. Wget, curl and
pv are installed.
I restarted lms or rebooted the vm but no success.
I also use philippe's plugins
tomsat50 wrote:
> I have tried everything possible to exclude any issue with my network
> (a.o. interchanged the LMS device from it's position).
> For now I have deactivated LMS on the piCorePlayer, and use it only as a
> music player.
> So LMS is only active on my max2play device, on which all m
d6jg wrote:
> Are you sure it isnt a networking issue? Tried swapping the Ethernet
> cables over between the 2 Pis?
>
>
> Sent from my iPhone using Tapatalk
I have tried everything possible to exclude any issue with my network
(a.o. interchanged the LMS device from it's position).
For now I
my skipping issue happens regardless if hardware. Pi or Boom.
Synchronised or not. Pi player is max2play set up and LMS server is
max2play too.
not network AFAIK as it seems like a skipping issue you get when
multiple devices going for one account and not due to buffering etc at
all.
---
Are you sure it isnt a networking issue? Tried swapping the Ethernet
cables over between the 2 Pis?
Sent from my iPhone using Tapatalk
*Pi3 with piCoreplayer music on QNAP TS419p via NFS*
iThingys/iPeng/Tablets/Jogglers
*Living Room* - Joggler & SB3 -> Onkyo TS606 - > Celestion Ditton F20s
I have 2 LMS systems running: one on a max2play (RPI 2), and one on a
piCorePlayer (also RPI 2).
Both configurations have been installed from 'scratch', with the most
recent versions of the software, including LMS and Spotty.
I have skipping problems with Spotty on the piCorePlayer when I playbac
Giza2020 wrote:
> tried both and same issue..sometimes it skips every song after 20 secs
> or less.
> I'll keep perseveringI had the same issue with version 1.9.3. After updating
> to 1.9.4 I had
to restart to make it work. Later I tried using my Radio with it and the
same issue ocurred requirin
slartibartfast wrote:
> Have you tried restarting LMS? If that doesn't work reboot the Pi.
>
> Sent from my SM-G900F using Tapatalk
tried both and same issue..sometimes it skips every song after 20 secs
or less.
I'll keep persevering
Hi,
What could be wrong in my setup using Qnap and Spotty
Described in this Post
I can run PV, CUrl and wget manually but it seems like Spotty cannot.
Is it acces rights or some path that is missing?
Please help, I would love to use Connect.
PS. Spotty works good playing spotify from the LMS Sp
remoss wrote:
> Here the exact same thing.
> PiCorePlayer v3.22 with LMS version 7.9.1, built 1505480690
> Spotty v.1.9.4Have you tried restarting LMS? If that doesn't work reboot the
> Pi.
Sent from my SM-G900F using Tapatalk
---
I have an empty menu in Spotty (web, iPeng, Squeeze Ctrl.
In server log: Spotty::API::getToken (137) Failed to get Spotify access
token
LMS on WHS 2011, latest nightly
No message about a missing MS VC 2015 runtime.
LMS (latest nightly) on Windows Home Server 2011
Squeexebox Touch
Squeezebox B
Has anyone had luck with Spotty on Raspberry Pi3 running OSMC?
I get this in log:
"Slim::Utils::Misc::msg (1250) Warning: [16:36:20.6830]
DBIx::Class::ResultSet::update_or_create(): Query returned more than one
row. SQL that returns multiple rows is DEPRECATED for ->find and
->single at /usr/sha
Thanks ! Thanks ! Thanks !
It was difficult to find where to activate the option on each squeezebox
but now it's OK.
I run with an ubuntu server (that I have updated because the repo was
not supported anymore to add wget,pv and curl... :/)
Looking forward the volume tuning ;)
Really useful thanks
buzzsb wrote:
> I am running the latest Synology LMS package: 7.7.6-113. I will wait for
> your next release.
You really need to run the latest LMS instance which is 7.9.1
Details for how to get the latest version - prepared by Pinkdot - onto
your Synology are on the thread linked below:
http://f
jr01 wrote:
> I think my PR could also take us one step closer to getting rust-mdns
> working on Windows (by adding windows to [cfg(...)]), but I haven't rust
> cross compiled for Windows yet...and that will take me some time to
> investigate...
Well, today I did get one step closerand now I
I noticed today that LMS still has the "Official" Spotify plugin active
(though no longer working)
I've disabled it, but is there any issue if it is active?
Tony
SBTouch ♪ SBRadio ♬
Tony T's Profile: http://forums.slimd
mherger wrote:
> > By running the binaries, do you mean just enter their name?
>
> Yes. Or put ./ in front of them to tell the system to pick the files in
>
> the current folder.
>
> > for any of the files I get:
> > pv-i386
> > -sh: pv-i386: command not found
>
> I guess your system is x86_6
Giza2020 wrote:
> installed latest nightly and we seem to have lift off. no.skipping and
> appears to be flawless playback via Spotify connect.
>
> As always thank you Michael and the donation button will be activated
> once more :-)
spoke too soon.
happening again need to investigate fu
Giza2020 wrote:
> Will test further
installed latest nightly and we seem to have lift off. no.skipping and
appears to be flawless playback via Spotify connect.
As always thank you Michael and the donation button will be activated
once more :-)
mherger wrote:
>
> No Windows support (yet)
>
That looks promising! I thought librespot didn't support Spotify Connect
on Windows...
Best regards,
Dennis.
::Please vote:::
'::bug 1330:: New music should work on creation date'
(http://bugs.slimdevices.com/show_bug.cgi?id=1330)
'::bug 17963
I am running the latest Synology LMS package: 7.7.6-113. I will wait for
your next release.
mherger wrote:
> > [17-09-28 08:36:29.0365] Slim::Networking::IO::Select::__ANON__ (147)
> > Error: Select task failed calling Slim::Web::HTTP::processHTTP:
> > Undefined subroutine &Slim::Utils::Network::
slartibartfast wrote:
> Try restarting LMS.
>
> Sent from my SM-G900F using Tapatalk
Will test further
Giza2020's Profile: http://forums.slimdevices.com/member.php?userid=36318
View this thread: http://forums.slimdevices
I've given up using the connect feature ... for some unknown reason, on
my LMS, attempting a reboot always ends up with 'unable to access via
Putty'. The last time, the server failed to reboot - had to do a
reinstall from scratch.
Touch, Logitech Radio, Logitech UE Radio, O2 Joggler + SqpOS
U
Hi Michael,
I have finally managed to get Connect on Spotty "working".
I'm able to see new devices in Spotify client and switch playback to
them.. however it take about 15-20 sec of Connecting/Buffering and
playback stops after songs finishes (It always tries to play next song
but after second o
Again, great work and congrats on a really intuitive and pratical
wrinkle to an already great solution!
Obviously, we immediately tested it with a fresh Max2Play image and it
works great.
We also added a little paragraph to 'our tutorial'
(https://www.max2play.com/en/how-tos/howto-spotify/) to m
Giza2020 wrote:
> Michael awesome work!
>
> I have noticed something odd.
>
> track plays from app for 10 or 20 seconds - shows track time.
> skips to next track
> Next track plays - no time info.
> plays fully.
> Repeats with next track skipping and next one not and so on.
> 1 skip . 1play.
Michael awesome work!
I have noticed something odd.
track plays from app for 10 or 20 seconds - shows track time.
skips to next track
Next track plays - no time info.
plays fully.
Repeats with next track skipping and next one not and so on.
1 skip . 1play. 1 skip. 1 play
on pi LMS server (
Spotify Connect works perfect on my Squeezebox Touch with LMS running on
a CuBox-i4Pro (Armbian).
Logitech Squeezebox Touch
Squeezebox Radio
Squeezebox server running on Synology DS211
frisser's Profile: http://forums.sli
I am now playing a daily mix through my synchronized SB3, SB2, and
piCorePlayer. LMS is running on another pCp with squeezelite disabled.
This. Is. Awesome.
Thank you so much, Michael, for continuing to support those of us who
refuse to stop using LMS!
All the thumbs up!
mherger wrote:
> > Will use username+password for now, which runs fine, but I'd love to
> be
> > able to try the Connect functionality at some point :)
>
> Connect should work even without discovery. The clients would get the
> information about available players from Spotify's servers. I eg. s
Working OK in my ReadyNas Ultra 4 (OS 4) after installing just pv.
Thanks (again) for your work, mherger!
Pablo
My blog :: http://www.pablofelip.tk
takerna's Profile: http://forums.slimdevices.com/member.php?userid=55656
Michael!
I tried the Connect feature again. After the usual inability to switch
connect endpoints via the spotify web app, I then rebooted the server
... and discovered I couldn't login in via Putty (connection refused).
However, I was able to use the LMS web-gui.
I then did another cold-bo
mherger wrote:
> > And if I stop playback on the new device from the Spotify app playback
> > continues on the first device.
>
> DSTM kicking in?
>
> --
>
> MichaelIt is playing the same album in the same order so if it is DSTM it
> would
be a big coincidence. This would be a case when you w
And if I stop playback on the new device from the Spotify app playback
continues on the first device.
DSTM kicking in?
--
Michael
___
plugins mailing list
plugins@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/plugins
slartibartfast wrote:
> Now I have tried this and it does not stop after the current track. It
> is now on the third track of an album when I transferred to another
> device during track one.
>
> Sent from my SM-G900F using TapatalkAnd if I stop playback on the new device
> from the Spotify app
mherger wrote:
> >>> If I transfer playback from one Squeezebox device to another then
> the
> >>> original device still plays. I assume this is because the daemon is
> >>> still running.
> >>
> >> It's actually a deliberate choice I made, because I thought it would
> be
> >> nicer not to stop th
If I transfer playback from one Squeezebox device to another then the
original device still plays. I assume this is because the daemon is
still running.
It's actually a deliberate choice I made, because I thought it would be
nicer not to stop the music abruptly.
I have not tried this but will i
mherger wrote:
> > If I transfer playback from one Squeezebox device to another then the
> > original device still plays. I assume this is because the daemon is
> > still running.
>
> It's actually a deliberate choice I made, because I thought it would be
> nicer not to stop the music abruptly.
[17-09-28 08:36:29.0365] Slim::Networking::IO::Select::__ANON__ (147)
Error: Select task failed calling Slim::Web::HTTP::processHTTP:
Undefined subroutine &Slim::Utils::Network::serverURL called at
/volume1/@appstore/SqueezeCenter/Cache/InstalledPlugins/Plugins/Spotty/Connect.pm
line 337.
; fh=Sli
If I transfer playback from one Squeezebox device to another then the
original device still plays. I assume this is because the daemon is
still running.
It's actually a deliberate choice I made, because I thought it would be
nicer not to stop the music abruptly.
--
Michael
__
If I transfer playback from one Squeezebox device to another then the
original device still plays. I assume this is because the daemon is
still running.
Sent from my SM-G900F using Tapatalk
slartibartfast's Profile: http
[17-09-28 08:36:29.0365] Slim::Networking::IO::Select::__ANON__ (147)
Error: Select task failed calling Slim::Web::HTTP::processHTTP:
Undefined subroutine &Slim::Utils::Network::serverURL called at
/volume1/@appstore/SqueezeCenter/Cache/InstalledPlugins/Plugins/Spotty/Connect.pm
line 337.
; fh=Sli
I just wanted to let you know that my two Booms had disappeared again as
Spotify Connect devices until I restarted LMS. Maybe that's also an
effect with LMS 7.9.0 (?)
It's likely the daemon crashing. What platform are you on? Did you check
server.log for traces of spotty?
--
Michael
Will use username+password for now, which runs fine, but I'd love to be
able to try the Connect functionality at some point :)
Connect should work even without discovery. The clients would get the
information about available players from Spotify's servers. I eg. see
devices at home when in the
By running the binaries, do you mean just enter their name?
Yes. Or put ./ in front of them to tell the system to pick the files in
the current folder.
for any of the files I get:
pv-i386
-sh: pv-i386: command not found
I guess your system is x86_64 based? What do you get for the other pv
jr01 wrote:
> I think my PR could also take us one step closer to getting rust-mdns
> working on Windows (by adding windows to [cfg(...)]), but I haven't rust
> cross compiled for Windows yet...and that will take me some time to
> investigate...
FWIW: my experience trying to cross-compile has be
mherger wrote:
> > Iâm using spotty 1.9.4 and LMS 7.9.1
> > I do get the warning in player settings for spotty.
> >
> > I can log to the qnap using a terminal window, but what should I
> test
> > manually?
>
> Go to Settings/Information to find out where LMS is looking for the
> files (ther
I'm still finding the connect feature very difficult to use. Tracks
play okay on Touch - BUT attempting to switch to another connect device
(eg. Echo Dot) is very hit'n'miss with the chosen device failing to
indicate on the Spotify list, and where the Touch is still shown as the
chosen player.
R
Hi Michael,
I just wanted to let you know that my two Booms had disappeared again as
Spotify Connect devices until I restarted LMS. Maybe that's also an
effect with LMS 7.9.0 (?)
fraho's Profile: http://forums.slimdevices.
jr01 wrote:
> What kernel version does the DS214 have? If it is < 3.9 then discovery
> doesn't work, until Michael picks up my patch to rust-mdns
Thanks, ok, saw your bug report against rust-mdns. The DS214 runs on
3.2.40, so that's precisely the problem.
Will use username+password for now, wh
I’m using spotty 1.9.4 and LMS 7.9.1
I do get the warning in player settings for spotty.
I can log to the qnap using a terminal window, but what should I test
manually?
Go to Settings/Information to find out where LMS is looking for the
files (there's a section about the helper binaries). Log
mherger wrote:
> > Is it possible to add the PV module for Qnap-intel with in
> > Spotty-plugin?
>
> It should be there already. Not QNAP specific, but Intel 32/64 bit. What
>
> plugin version are you running? Can you log in to the device to run some
>
> tests manually?
>
> --
>
> Michael
mherger wrote:
> > Does this help?
>
> It shows that the daemon indeed seems to be starting correctly. But it
> doesn't look as if you had tried to play something. Did you?
>
> --
>
> Michael
Thanks for taking a look... Yes, I was playing something on the Spotify
android app, it showed my p
mherger wrote:
> From reading the documentation it seems that if you launch the
> application with all its parameters as a string, then the shell is being
> used. If you pass the executable's name and parameters as distinct
> elements of a list, then it shouldn't. Are you passing a string to
> ->
Running with a group of synced players (all wired) I am getting 5
seconds or so of a track, followed by a whole track, followed by 5
seconds of that track repeated, then the next track.
Yeah, I need to test the sync case. I wouldn't be surprised if that came
with a few more surprises...
--
Does this help?
It shows that the daemon indeed seems to be starting correctly. But it
doesn't look as if you had tried to play something. Did you?
--
Michael
___
plugins mailing list
plugins@lists.slimdevices.com
http://lists.slimdevices.com/mailm
TripleT wrote:
> >
Code:
> > [17-09-26 17:49:32.7319] Plugins::Spotty::SettingsAuth::startHelper
(134) Starting authentication deamon:
/volume1/@appstore/LmsRepack/Cache/InstalledPlugins/Plugins/Spotty/Bin/arm-linux/spotty-muslhf
-c "/volume1/@appstore/LmsRepack/Cache
philippe_44 wrote:
> Yes I do use Proc::Background but it's a direct launch of the app, not
> in a shell so I assume I get the right PID.
>From reading the documentation it seems that if you launch the
application with all its parameters as a string, then the shell is being
used. If you pass the
mherger wrote:
> > Hi Michael - BTW, I had to do the same on Shairtunes2 with my mDNS
> > processes (one per player). Any idea why sometimes the player deletion
> > callback does not seem to be called? I've had this problem only on
> > Linux, not on Windows (for once ...)
>
> I think in Spotty's
mherger wrote:
> > There's nothing obvious that i can see in the log.
>
> Set the logging level for plugin.spotty to INFO, try again. Then upload
>
> your server.log file.
>
> --
>
> Michael
Does this help?
23742
+---+
|Filen
Pi3 with piCorePlayer 3.20 - dedicated LMS (Wired)
Logitech Media Server Version: 7.9.1 - 1505480690 @ Fri Sep 15 22:32:08
UTC 2017
Hostname: piLMS
Server IP Address: 10.0.0.7
Server HTTP Port Number: 9000
Operating system: piCore - EN - utf8
Platform Architecture: armv7l-linux
Perl Version: 5.24.
There's nothing obvious that i can see in the log.
Set the logging level for plugin.spotty to INFO, try again. Then upload
your server.log file.
--
Michael
___
plugins mailing list
plugins@lists.slimdevices.com
http://lists.slimdevices.com/mailman/
Apologies - I'm sure I've missed something obvious, but I can't get
Connect working. I have 1.9.4 installed and the player enabled... The
player shows up on the android spotify app and implies that it's
transferred playback and is playing, but there's no response at all on
the player or web ui.
mherger wrote:
> > Just removed spotty, rebooted pi, installed spotty (1.9.4), rebooted
> pi.
> > Still no luck.
> > Track is stuttering and playtime is jumping back and forth.
>
> What player? Wireless or wired? Anything in server.log?
>
> --
>
> Michael
Appears to be a mixed issue. First th
I restarted LMS on Max2Play and that disconnected my Touch from Spotify
Connect so this change works for me.
That would be good news. Thanks!
--
Michael
___
plugins mailing list
plugins@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listi
Hi Michael - BTW, I had to do the same on Shairtunes2 with my mDNS
processes (one per player). Any idea why sometimes the player deletion
callback does not seem to be called? I've had this problem only on
Linux, not on Windows (for once ...)
I think in Spotty's case it's my using pipes in the co
mherger wrote:
> > Should an LMS restart also kill and restart the Connect daemons? I
> don't
> > think it does so a Plugin upgrade probably needs a full system reboot
> to
> > become effective?
>
> Yes, there indeed is a problem with this. I tried to add some
> brute-force "killall" approach i
mherger wrote:
> > Should an LMS restart also kill and restart the Connect daemons? I
> don't
> > think it does so a Plugin upgrade probably needs a full system reboot
> to
> > become effective?
>
> Yes, there indeed is a problem with this. I tried to add some
> brute-force "killall" approach i
I upgraded (accidentally... meant to upgrade to os x sierra) to high
sierra. spotty seems broken.
Please define "broken". Working fine here.
--
Michael
___
plugins mailing list
plugins@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listin
Is it possible to add the PV module for Qnap-intel with in
Spotty-plugin?
It should be there already. Not QNAP specific, but Intel 32/64 bit. What
plugin version are you running? Can you log in to the device to run some
tests manually?
--
Michael
Should an LMS restart also kill and restart the Connect daemons? I don't
think it does so a Plugin upgrade probably needs a full system reboot to
become effective?
Yes, there indeed is a problem with this. I tried to add some
brute-force "killall" approach in 1.9.4 when shutting down LMS. Can y
I upgraded (accidentally... meant to upgrade to os x sierra) to high
sierra. spotty seems broken.
Thanks for all you do
BB
bruinboy's Profile: http://forums.slimdevices.com/member.php?userid=62436
View this thread: http://
Is it possible to add the PV module for Qnap-intel with in
Spotty-plugin?
NAS: QNAP TS-459U+ -QTS 4.2.6- (4x 2TB, RAID5)
Services: LMS- 7.9.1 -, SSOTS- 4.14-
Squeezebox: 6x Reciever, 3x Boom, 2x SB3 Classic
Other: iPeng on iPad and iPhone
-
d6jg wrote:
> Michael
> Should an LMS restart also kill and restart the Connect daemons? I don't
> think it does so a Plugin upgrade probably needs a full system reboot to
> become effective?
I found I needed to reboot my Pi to kill the daemon so I think your are
correct.
-
Michael
Should an LMS restart also kill and restart the Connect daemons? I don't
think it does so a Plugin upgrade probably needs a full system reboot to
become effective?
*Pi3 with piCoreplayer music on QNAP TS419p via NFS*
iThingys/iPeng/Tablets/Jogglers
*Living Room* - Joggler & SB3 -> Onkyo
Just removed spotty, rebooted pi, installed spotty (1.9.4), rebooted pi.
Still no luck.
Track is stuttering and playtime is jumping back and forth.
What player? Wireless or wired? Anything in server.log?
--
Michael
___
plugins mailing list
plugins@li
slartibartfast wrote:
> Just installed 1.9.4 and see the same behaviour as 1.9.3. The first
> track of a palylist plays for 8 seconds while pause icon is displayed
> then playback skips to the next track and play icon is displayed while
> the track plays and track time stays at 0 seconds.
>
> Se
mherger wrote:
> > 1.9.4 has just appeared as available. What's changed in it Michael?
>
> It hopefully fixes the frequent pausing of the playback that happened on
> some installations.
>
> MichaelJust installed 1.9.4 and see the same behaviour as 1.9.3. The first
track of a palylist plays for
edwin2006 wrote:
> I did a reboot after upgrading lms and reinstalling spotty. Just now i
> did a reboot again, no luck.
> Also noticing that play / pauze in spotty is not reacting as quick as
> before.
Just removed spotty, rebooted pi, installed spotty (1.9.4), rebooted pi.
Still no luck.
Track
> O.k., but I wasn't trying to seek within a track. It happens when
> switching from one player to another in the Spotify app. Or has this
> technically the same background?
Yes, technically it's just starting playback at a specific position. Seeking
would be interactive, Connect transfer automa
> mac os 10.9.5
For macOS 10.9 you'd have to additionally install SpottyMacBin.
> lms 7.9.1
> spotty 1.9.3
>
> spotify connect: I see my squeezebox player on spotify connect choices.
> Spotify connects and appears to play (on spotify player)... but...
Connect currently doesn't work on 10.9 a
> 1.9.4 has just appeared as available. What's changed in it Michael?
It hopefully fixes the frequent pausing of the playback that happened on some
installations.
Michael
___
plugins mailing list
plugins@lists.slimdevices.com
http://lists.slimdevice
Michael:
mac os 10.9.5
lms 7.9.1
spotty 1.9.3
spotify connect: I see my squeezebox player on spotify connect choices.
Spotify connects and appears to play (on spotify player)... but...
no sound
no metadata on web browser/squeezebox player
thanks for helping me troubleshoot
SB
-
1.9.4 has just appeared as available. What's changed in it Michael?
*Pi3 with piCoreplayer music on QNAP TS419p via NFS*
iThingys/iPeng/Tablets/Jogglers
*Living Room* - Joggler & SB3 -> Onkyo TS606 - > Celestion Ditton F20s
*Office* - Pi -> Sony TA FE320 -> Celestion F10s / Pi & SB3 -> Onkyo CR
mherger wrote:
>
> That would explain why the track is starting from the beginning. You'll
>
> need 7.9.1 to allow seeking within a track.
> Michael
O.k., but I wasn't trying to seek within a track. It happens when
switching from one player to another in the Spotify app. Or has this
technicall
That will be it then although I have Smart Crossfade enabled which in
LMS does not crossfade between tracks on the same album when played in
order. I suppose an album on Spotify is not recognised as an album by
LMS since tracks seem to appear one at a time in the Web UI.
When playing in Connect
mherger wrote:
> Yeah, something is not quite right there... I did get some random
> skipping of tracks, too. And looking at the diagram of requests being
> used I bet there's too many "pause" events going on:
>
> 23731
>
> That orange line is the "pause" command, while the other lines represen
mherger wrote:
> > In another post I mentioned that all tracks played using connect seem
> to
> > crossfade. Have you noticed this? I don't hear this when playing to a
> > Bluetooth speaker from my phone.
>
> LMS settings apply. Do you have crossfading configured in LMS?
>
> --
>
> MichaelTha
Are you running LMS 7.9.1?
No, it's 7.9.0
That would explain why the track is starting from the beginning. You'll
need 7.9.1 to allow seeking within a track.
--
--
Michael
___
plugins mailing list
plugins@lists.slimdevices.com
http://lists.slimdevi
mherger wrote:
>
> Are you running LMS 7.9.1?
> Michael
No, it's 7.9.0
fraho's Profile: http://forums.slimdevices.com/member.php?userid=66430
View this thread: http://forums.slimdevices.com/showthread.php?t=108030
_
In another post I mentioned that all tracks played using connect seem to
crossfade. Have you noticed this? I don't hear this when playing to a
Bluetooth speaker from my phone.
LMS settings apply. Do you have crossfading configured in LMS?
--
Michael
It's not possible to control the volume etc.
Not possible from the Spotify app, yes. That's a known issue.
or switch Spotify Connect
between my two Booms without the song then being played from the
beginning on the second device and having the first Boom continuing it.
Are you running LMS 7.
mherger wrote:
>
> Did Connect ever work at all on that device?
>
It's not possible to control the volume etc. or switch Spotify Connect
between my two Booms without the song then being played from the
beginning on the second device and having the first Boom continuing it.
But at least I can h
mherger wrote:
> Yeah, something is not quite right there... I did get some random
> skipping of tracks, too. And looking at the diagram of requests being
> used I bet there's too many "pause" events going on:
>
> 23731
>
> That orange line is the "pause" command, while the other lines represen
Hi Michael, thanks for bringing back Spotify to LMS and the
implementation of Spotify Connect! I'm running LMS on an armel based
Synology and can see my Squeezeboxes as target devices in the Spotify
app as soon as I'm activating them in LMS - Settings - Player - Spotty
Spotify for Squeezebox. Howe
slartibartfast wrote:
> Connect seems to work but with some strange issues. Sometimes the track
> playing time bar does not move even though a track is playing. Sometimes
> the play icon is displayed instead of the pause icon.
Yeah, something is not quite right there... I did get some random
ski
I thought it was either/or for wget and curl ?
Yes, it is. But the message is given no matter whether the other tool is
found or not. I assume it does work anyway?
--
Michael
___
plugins mailing list
plugins@lists.slimdevices.com
http://lists.slimd
Hi Michael, thanks for bringing back Spotify to LMS and the
implementation of Spotify Connect! I'm running LMS on an armel based
Synology and can see my Squeezeboxes as target devices in the Spotify
app as soon as I'm activating them in LMS - Settings - Player - Spotty
Spotify for Squeezebox. Howe
Hi Michael,
Thanks again for this amazing plugin.
It Just Works !
Max2Play on an Pi3
Squeezebox Touch
Spotify on the Macbook
Sander
@ Home: LMS 7.9 on Raspberry Pi3 max2play, Squeezebox Touch, Squeezebox
Radio, Squeezebox Boom, Denon AVR 2312, Apple TV4
@ Work: LMS 7.9 on Windows 10, Squee
I noticed that a few settings like Music quality is not available in
Spotify then using "Spotty Connect". Guess it is a limitation in Spotify
beacuse the settings is missing then connected to a CCA to.
Connected to a Spotify Connect device like Audio Pro ADDON C5 the
setting is there.
SB Touch
601 - 700 of 781 matches
Mail list logo
