Re: [SlimDevices: Plugins] [Announce] Spotty 4.4 - more personalised content
Is it possible to alter sample rate for output to other than 44100 from No. ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Announce] SuperDateTime Screensaver v5.11.0 - Date/Time/Weather/Sports/Stocks
Code: # 5.11.14 03/14/21 Fixed forecasted wind speed for periods C, 1, 2, & 3. # Added forecasted wind speeds for "10-day" periods. # Updated macro variables listing on the Settings->Player->SDT page. # mi/hr = %!w, km/hr = %!W, kt = %!q, m/s = %!Q # BoomX2's Profile: http://forums.slimdevices.com/member.php?userid=33529 View this thread: http://forums.slimdevices.com/showthread.php?t=112122 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Announce] SuperDateTime Screensaver v5.11.0 - Date/Time/Weather/Sports/Stocks
MichaelPr wrote: > That's what I just wanted to reply. I tried with Softsqueeze and exactly > the same behaviour is reproducible. > > > Only screensavers on display 2 shows information on top. And yes, every > time when "Screensaver when stopped" is configured. Configure the > screensaver to "Screensaver when off" blanks the second display. That's > why I didn't recognized it in the past. Now, I tried to ticker stocks > quotes when stopped playing music. Then the configured last screen on > display 2 stays in the background (no flush) forever. > > 33774 > > Configuration is as followed: > Player Tab: > > 33775 > > SuperDateTime Tab: > 33776 > > Advanced Tab/ SuperDateTime Screenserver: > Display 2 seems to be come from here - at least disabling "Sports" > didn't show sport results on top. > > 33777 > > A good option from my point would be to make it configurable if the > display 2 shows something or not (a checkbox to disable stocks/ sports > information on screensaver) and flush the screen before drawing. On Boom > I saw the screens where shown one after one by scrolling... I'll see what I can sort out using Softsqueeze as a test platform for Transporter's second screen. It will likely take me a while. The original author of SDT, Greg Brown, worked out all the screensaver functionality. Most of my efforts since ~2015 when Greg no longer had the time to support SDT has been in the area of identifying new sources for data, data collection, and data parsing. BoomX2's Profile: http://forums.slimdevices.com/member.php?userid=33529 View this thread: http://forums.slimdevices.com/showthread.php?t=112122 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Announce] SuperDateTime Screensaver v5.11.0 - Date/Time/Weather/Sports/Stocks
ralphy wrote: > You could try 'Softsqueeze' > (https://sourceforge.net/projects/lmsclients/files/softsqueeze/), it has > a transporter skin. Thanks! I'll give it a try. BoomX2's Profile: http://forums.slimdevices.com/member.php?userid=33529 View this thread: http://forums.slimdevices.com/showthread.php?t=112122 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
Aesculus wrote: > I am still upset that the menu's in the Plugin don't get set properly on > the first viewing. You have to go into the menu, see nothing has been > set, leave and come back, or select something. Hmmm... I never noticed that. Does it only happen the first time after the plugin is installed, or every time LMS is restarted? Sam SamY's Profile: http://forums.slimdevices.com/member.php?userid=63495 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: PlayHLS Plugin - plugin to play Apple HLS m3u8 stream
bpa wrote: > Where are the URLs - I'm going to spend time hunting them down. > edit: > > First look at website > > 1. Streams have video > 2. Stream require DRM - I don't implement DRM can VLC play DRM-Streams? i think the live streams are without DRM If i look into the codec information in vlc i see 2 streams a) video H264 MPEG 4 AVC b) audio MPEG AAC As I wrote, I could post links, but these are only valid during the live session. eg: https://cdn-fastly-live-euw1-eks.mixcloud.com/hls/192E168A46D240/1615938979/djXqc9exaXRoEqbjDmtevA/25426559-3a4b-4ec7-92c5-4d388fce511d/index-720p.m3u8 valid 15.3.2021 01:40 CET therefore you have to click on any video and then extract the link as follows: 1) play the stream, 2) open the developer tools of your browser and look into the network tab. 3) the m3u8-file is requested every few seconds. 4) copy the link and open it with vlc/play network stream olivaar's Profile: http://forums.slimdevices.com/member.php?userid=64848 View this thread: http://forums.slimdevices.com/showthread.php?t=103158 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
FWIW I migrated the Wiki to a more friendly GitHub format and updated the contents. https://github.com/aesculus/denonavpcontrol/wiki Chris Aesculus's Profile: http://forums.slimdevices.com/member.php?userid=14876 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Material Skin
Just wondering if something has happened to the shortcut keys on a recent version? I regularly use Cmd+Shift+E on my Mac to Expand Now Playing, but it no longer seems to work. The shortcut combination still appears in the tooltip and help (and shortcuts are enabled in the settings) but the Now Playing screen only works when I click the button. Tried it in both Chrome and Safari. Some shortcut keys work (e.g. Alt+Up, Alt+Down for volume) but I've tried a few others (Cmd+G for Settings, Cmd+I for information) and they aren't working either. FatPete's Profile: http://forums.slimdevices.com/member.php?userid=64294 View this thread: http://forums.slimdevices.com/showthread.php?t=109624 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [ANNOUNCE] TVH Plugin - TVHeadend integration
Hi Andrew, because of remove icon mapping in MaterialSkin, I became aware of your plugin - using TVHeadEnd and LMS since many years now I added my DVB-C Radio channels manually to favorites like: 'http://Squeeze:mypass@LMSServerII:9981/stream/channelid/128246553?profile=radio' Great job and infrastructure for your TVH Plugin. This makes it much more comfortable! Especially adding the station icon via favorites.opml was always a pain. Two minor things: The icon in Squeezer is missing and it seems your are using the channel number for tuning. In my case all radio channels were 0 and your plugin tuned everything to the same channel. Could you maybe use the id like Kodi is doing it? But for now I set all my channels to a specific channel number. If you like I can open a bug/request in GitHub ;-) By the way I'm using HTS Tvheadend in its Version 4.3-1857~g221c29b40 (together with LMS) on a RPi4. Means I've no transcoding via TVHeadEnd enabled - but my DVB-C provider feeds the stations in MPEG-2 audio. So for adding a "Stream Profile" I used: "Type Audio stream/ Audio type: MPEG-2 audio". Works perfect! Again - Thanks a lot for the great work!!! Michael lms: logitech media server version: 8.2.0 - 1614990095 @ sat mar 6 01:45:13 cet 2021 squeeze-players: duet - controller firmware: 8.0.1-r16835 receiver firmware: 77 2x radio - firmware: 8.0.1-r16835 raspberrypi 2b - pcp 7.0.0/ squeezelite v1.9.9-1364-pcp transporter - firmware: 87 softsqueeze 3.9.2 on win 10 / squeezeplay 8.0.1r1343 on win 10 squeeze player 1.3.21 on s7/android 8.0.0 controller: android phone - squeezer 2.2.3/ material skin 2.3.4 MichaelPr's Profile: http://forums.slimdevices.com/member.php?userid=68465 View this thread: http://forums.slimdevices.com/showthread.php?t=110619 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] iPeng support thread
pippin wrote: > iPeng looks for playable URLs (audio files, streams etc.) in the > clipboard. If it finds any, it presents a menu to allow you to play it > on the current player or add to favorites. > If it doesn't find any, it does nothing. > Thanks for the explanation - no problem! :cool: FatPete's Profile: http://forums.slimdevices.com/member.php?userid=64294 View this thread: http://forums.slimdevices.com/showthread.php?t=51929 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Compatible Plugins LMS 8.2 nightly
bpa wrote: > They shouldn't have version problems. Do you have plugin rfepo URLs ? > maybe they are old development ones. > > PlayMP4 was an hack plugin (IIRC used ffmpeg to play MPEG4) which is > now redundant with addition of MP4 support in 8.* so it is not needed > for 8.* I try to reverse engineer the source of these 4 plugins. Overall my repository list is pretty long: - http://www.herger.net/slim-plugins/test.xml - http://www.spicefly.com/media/scube4x/install.xml - http://www.spicefly.com/media/scube4x/latest.xml - http://www.spicefly.com/legacy_plugins/repo.xml - http://erland.github.io/squeezebox-downloads/repositories/latest.xml - http://www.hickinbottom.com/sc-plugins/repo.xml - http://server.vijge.net/static/squeezebox/repo-beta.xml - http://grobbie.github.io/SqueezeCloud/public.xml - http://danielvijge.github.io/SqueezeCloud/public.xml - https://sourceforge.net/projects/sdt-weather-com/files/repo.xml - https://iweb.dl.sourceforge.net/project/lms-plugins-philippe44/repo-sf.xml - http://raw.githubusercontent.com/oweitman/LMS-shoutcast/master/public.xml - https://downloads.sourceforge.net/project/bpaplugins/betarelease-repo.xml - http://sbplugins.servies.net/repo.xml - http://smallproblem.com/touchmeter/jstraws_squeezebox_touch_enhancements.xml - https://downloads.sourceforge.net/project/lms-groups/dev/repo-sf.xml - https://squeezebox-googlemusic.github.io/squeezebox-googlemusic/repository/repo.xml - https://downloads.sourceforge.net/project/bpaplugins/iheartradio-repo.xml - http://raw.githubusercontent.com/molobrakos/lms-mobileskin/master/public.xml - https://raw.githubusercontent.com/unhawkable/squeeze/master/repo.xml - https://downloads.sourceforge.net/project/bpaplugins/OtherPlugins/bpapluginsrepo.xml - https://raw.githubusercontent.com/CDrummond/lms-material/master/public.xml - https://raw.githubusercontent.com/ralph-irving/EnhancedDigitalOutput/master/files/edo-repo.xml - https://downloads.sourceforge.net/project/mrw-applets/repo.xml - https://www.nexus0.net/pub/sw/lmsplaylisteditor/repo.xml - http://www2.woodbine.me.uk/squeezebox/repo/repo.xml - https://downloads.sourceforge.net/project/bpaplugins/repo-playhls-v2-beta.xml - https://downloads.sourceforge.net/project/bpaplugins/repo-playmp4.xml - https://tuxreborn.netlify.com/slim/slim7/repodata.xml - https://tuxreborn.netlify.com/slim/slim7/repodata-test.xml - https://bpa-code.github.io/bpaplugins/radionet-repo.xml - http://danielvijge.github.io/SqueezeCloud/public-dev.xml - https://www.nexus0.net/pub/sw/lmsmodplay/repo.xml - https://www.nexus0.net/pub/sw/lmsdboptim/repo.xml frankd's Profile: http://forums.slimdevices.com/member.php?userid=52885 View this thread: http://forums.slimdevices.com/showthread.php?t=114151 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Announce] Spotty 4.4 - more personalised content
/var/lib/squeezeboxserver/cache/InstalledPlugins/Plugins/Spotty/custom-convert.conf
I read
spt pcm * *
# RT:{START=--start-position %s}
[spotty] -n Squeezebox -c "$CACHE$" --single-track $URL$
--bitrate 320 --disable-discovery --disable-audio-cache $START$
Is it possible to alter sample rate for output to other than 44100 from
this command string, or do we need to pipe into sox?
zzzap's Profile: http://forums.slimdevices.com/member.php?userid=31947
View this thread: http://forums.slimdevices.com/showthread.php?t=112962
___
plugins mailing list
plugins@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > I've found through experience that, while this may be true for some of > the settings, most changes take place immediately without having to > restart LMS. I decided trying to figure out and then explain which does and which does not to be to complex. :-) I am still upset that the menu's in the Plugin don't get set properly on the first viewing. You have to go into the menu, see nothing has been set, leave and come back, or select something. Another bug I lost interest in chasing. :-( Chris Aesculus's Profile: http://forums.slimdevices.com/member.php?userid=14876 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Compatible Plugins LMS 8.2 nightly
frankd wrote: > I upgraded my system from 7.x to 8.2 nightly today. > Before upgrading I edited the install.xml of those plugins in my local > installation, which had a 7.* instead of 8.* as maxversion. > among many plugins installed, I had to update only 4: > > PLUGIN_IHEARTRADIO > PLUGIN_PLAYHLS > PLUGIN_PLAYMP4 > PLUGIN_WAVEINPUT > > They shouldn't have version problems. Do you have plugin rfepo URLs ? maybe they are old development ones. PlayMP4 was an hack plugin (IIRC used ffmpeg to play MPEG4) which is now redundant with addition of MP4 support in 8.* so it is not needed for 8.* bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=114151 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce - Song info plugin for FIP radio
Paul Webster wrote: > Maybe the first logo was inspired by their HQ building ... Maison De La > Radio (not checked the timing). That's it. That's what wikipedia says. https://fr.wikipedia.org/wiki/Radio_France#Identit%C3%A9_visuelle_(logo) Franck@'s Profile: http://forums.slimdevices.com/member.php?userid=68468 View this thread: http://forums.slimdevices.com/showthread.php?t=106900 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
[SlimDevices: Plugins] Compatible Plugins LMS 8.2 nightly
I upgraded my system from 7.x to 8.2 nightly today. Before upgrading I edited the install.xml of those plugins in my local installation, which had a 7.* instead of 8.* as maxversion. among many plugins installed, I had to update only 4: PLUGIN_IHEARTRADIO PLUGIN_PLAYHLS PLUGIN_PLAYMP4 PLUGIN_WAVEINPUT I verified that iheadradio and waveinput work, I have no experience with playhls and playmp4. Maybe we could move the first two to the "compatibility list", the other two may be verified for users. Concerning patches and plugins for the hardware - we should go the same way - allowing all patches and plugins to work with the community firmware by updating the repository files or even patching the plugins. just for info - I had many plugins installed, the entire list below: not all tested, but no major hiccups during starting them. All plugins were updated using LMS 7.9 before updating to 8.2x AllQuiet AutoDisplay Bandcamp BBCiPlayer BBCiPlayerExtra BlankSaver BookmarkHistory C3PO CastBridge ClientCleanup ContextMenu CustomBrowse CustomClockHelper CustomScan CustomSkip DatabaseQuery DRS DynamicMix DynamicPlayList Groups HideMenus IgnoreDirREManager iHeartRadio IRBlaster KidsPlay KitchenTimer LastMix LicenseManagerPlugin LMSdbopt LMSmodplay LMSnewGUI LMSplaylistEditor MaterialSkin MIPMixer MixCloud MusicArtistInfo MusicInfoSCR MuslyMixer NewShoutcast PiCorePlayer PlayHistory PlayHLS PlaylistGenerator PlaylistMan PlayLog PlayMP4 PlayWMA Pluzz PowerSave RadioNet RadioParadise RaopBridge Reliable RemovePlayedSongs SaverSwitcher SettingsManager ShairTunes2W SleepFade SQLPlayList SqueezeCloud SugarCube SuperDateTime SwitchGroupPlayer SyncOptions TimeSpeller TitleSwitcher TrackStat TrackStatPlaylist UPnPBridge WalkWithMe WaveInput YouTube Best, Frank frankd's Profile: http://forums.slimdevices.com/member.php?userid=52885 View this thread: http://forums.slimdevices.com/showthread.php?t=114151 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: WaveInput for Linux
Bristow wrote: > Yes i have FLAC, MP3 and PCM but this is disabled and i can't change it Cant change because there is no executables that LMS can use. The entries should be Flac - arecord/flac MP3 - arecord/lame Thius will be disabled if you do not have "lame" installed PCM - arecord Since you have shown that "arecord" works on your system - then the problem is the permissions - the user id which is running LMS cannot find/execute the application arecord. This is strange. I have Ubuntu 20.04 and it is ok for me. Permission may also include groups. For example on some system the userid which is running LMS needs to be a member of the audio group so that it can access audio hardware although this depends on your audio hardware - which looks to be ordinary PC except for an odd additional subdevice. bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=49584 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: WaveInput for Linux
bpa wrote: > Is the plugin successfully installed ? > What version of the plugin is installed according to the WebUI > Settings/Plugins page ? I have 1.04 bpa wrote: > > Do you have a File Format called WaveInput under WebUI > Settings/Advanced/Filetypes and if so - what are the settings for FLAC, > MP3 and PCM ? Yes i have FLAC, MP3 and PCM but this is disabled and i can't change it :( bpa wrote: > > What is the output of "arecord -l" ? Is there a "default" device > listed ? I don't think so... Code: bristow@Desktop:~$ arecord -l Liste des Périphériques Matériels CAPTURE carte 0: PCH [HDA Intel PCH], périphérique 0: ALC898 Analog [ALC898 Analog] Sous-périphériques: 1/1 Sous-périphérique #0: subdevice #0 carte 0: PCH [HDA Intel PCH], périphérique 2: ALC898 Alt Analog [ALC898 Alt Analog] Sous-périphériques: 2/2 Sous-périphérique #0: subdevice #0 Sous-périphérique #1: subdevice #1 Thanks for your help ! 8 SqueezeBox : 1 Touch, 1 Boom, 4 Radios, 1 PiCorePlayer on rPiA and 1 Max2Play with Jivelite on Odroid C1 with TouchScreen - LMS Server on Synology 116+ - Bristow's Profile: http://forums.slimdevices.com/member.php?userid=52933 View this thread: http://forums.slimdevices.com/showthread.php?t=49584 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: WaveInput for Linux
Bristow wrote: > What more can I do? Thank you for everything! Is the plugin successfully installed ? What version of the plugin is installed according to the WebUI Settings/Plugins page ? Do you have a File Format called WaveInput under WebUI Settings/Advanced/Filetypes and if so - what are the settings for FLAC, MP3 and PCM ? What is the output of "arecord -l" ? Is there a "default" device listed ? bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=49584 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ANNOUNCE: AirPlay Bridge = integrate AirPlay devices with LMS (squeeze2raop)
Canadave wrote: > Thank you. That's what I suspected. I may try it, though my C skills are > at a novice level. If I have success, I'll let you know. Thank you for > all your work on Airplay Bridge, it gives me a good place to start. Maybe at some point I'll add something like JS extension with a few hooks on events (like player creation, destruction, play, pause, stop) but that's a fair bit of work and it's not like I have a personal need for these nor a lot of people want that LMS 8.1.x on Odroid-C4 - *SqueezeAMP!*, 5xRadio, 5xBoom, 2xDuet, 1xTouch, 1xSB3. Sonos PLAY:3, PLAY:5, Marantz NR1603, Foobar2000, ShairPortW, 2xChromecast Audio, Chromecast v1 and v2, Squeezelite on Pi, Yamaha WX-010, AppleTV 4, Airport Express, GGMM E5, RivaArena 1 & 3 philippe_44's Profile: http://forums.slimdevices.com/member.php?userid=17261 View this thread: http://forums.slimdevices.com/showthread.php?t=105198 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ANNOUNCE: AirPlay Bridge = integrate AirPlay devices with LMS (squeeze2raop)
philippe_44 wrote: > Thats is not easily doable. Each player advertises itself as a single > unit, not one unit per zone. So you would have to modify the helper to > create 2 bridge players for each detected airplay player and then > associate the « special command » to select the zone. From a software > development this is doable but this is a fair bit of custom code that I > would not be able to make generic. If you know your way to C, you can do > that Thank you. That's what I suspected. I may try it, though my C skills are at a novice level. If I have success, I'll let you know. Thank you for all your work on Airplay Bridge, it gives me a good place to start. Canadave's Profile: http://forums.slimdevices.com/member.php?userid=71506 View this thread: http://forums.slimdevices.com/showthread.php?t=105198 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: WaveInput for Linux
Hi, In order to remove the use of line-in on my squeezebox boom, I undertook to install squeezelite with the wavinput plugin on my Ubuntu 20.04 workstation (i'm sorry but I haven't read all 53 pages of the forum). The plugin is installed and activated, I restarted my 8.0.0 server. I have bookmarked wavin:default on my squeezelite but it doesn't seem to work. Here are my server logs Code: 21-03-14 21:37:22.6186] Slim::Player::Song::open (413) Error: Couldn't create command line for wavin playback for [wavin:default] What more can I do? Thank you for everything! 8 SqueezeBox : 1 Touch, 1 Boom, 4 Radios, 1 PiCorePlayer on rPiA and 1 Max2Play with Jivelite on Odroid C1 with TouchScreen - LMS Server on Synology 116+ - Bristow's Profile: http://forums.slimdevices.com/member.php?userid=52933 View this thread: http://forums.slimdevices.com/showthread.php?t=49584 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Announce] SuperDateTime Screensaver v5.11.0 - Date/Time/Weather/Sports/Stocks
That's what I just wanted to reply. I tried with Softsqueeze and exactly the same behaviour is reproducible. Only screensavers on display 2 shows information on top. And yes, every time when "Screensaver when stopped" is configured. Configure the screensaver to "Screensaver when off" blanks the second display. That's why I didn't recognized it in the past. Now, I tried to ticker stocks quotes when stopped playing music. Then the configured last screen on display 2 stays in the background (no flush) forever. 33774 Configuration is as followed: Player Tab: 33775 SuperDateTime Tab: 33776 Advanced Tab/ SuperDateTime Screenserver: Display 2 seems to be come from here - at least disabling "Sports" didn't show sport results on top. 33777 A good option from my point would be to make it configurable if the display 2 shows something or not (a checkbox to disable stocks/ sports information on screensaver) and flush the screen before drawing. On Boom I saw the screens where shown one after one by scrolling... +---+ |Filename: Capture6.PNG | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=33777| +---+ :: LMS: Logitech Media Server Version: 8.2.0 - 1614990095 @ Sat Mar 6 01:45:13 CET 2021 Squeeze-Players: Duet - Controller Firmware: 8.0.1-r16835 Receiver Firmware: 77 2x Radio - Firmware: 8.0.1-r16835 RaspberryPi 2B - pCP 7.0.0/ SqueezeLite v1.9.8-1287-pCP Transporter - Firmware: 87 Softsqueeze 3.9.2 on Win 10 / Squeezeplay 8.0.1r1337 on Win 10 Squeeze Player on S7/Android 8.0.0 Controller: Android Phone - Squeezer 2.2.3/ Material Skin 2.3.1:: MichaelPr's Profile: http://forums.slimdevices.com/member.php?userid=68465 View this thread: http://forums.slimdevices.com/showthread.php?t=112122 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ANNOUNCE: AirPlay Bridge = integrate AirPlay devices with LMS (squeeze2raop)
Canadave wrote: > > Both the Yamaha and the Denon can be controlled over IP, and I do have > the control protocols. So, what I'd like to know is whether there is a > way to: > There is a LMS plugin for Denon which is being actively worked on by a couple of people on this forum. So the thread on that might be a good place to dig around. https://forums.slimdevices.com/showthread.php?60114-Announce-Denon-AVP-Control-Plugin Paul Webster http://dabdig.blogspot.com author of \"now playing\" plugins covering radio france (fip etc), kcrw, supla finland, abc australia, cbc/radio-canada and rte ireland Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105 View this thread: http://forums.slimdevices.com/showthread.php?t=105198 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ANNOUNCE: AirPlay Bridge = integrate AirPlay devices with LMS (squeeze2raop)
Canadave wrote: > I'm new to this forum, and new to LMS/Squeezebox, but I'm experienced > with home automation and networking. > > I have LMS and the Airplay Bridge running on a Raspberry Pi, and they > are working well. I have 2 AV receivers, a Yamaha and a Denon, and both > have Airplay. They are both detected by Airplay Bridge and are working > properly. > > What I would like to be able to do is use the Zone 2 feature on each of > the receivers, ideally having Zone 2 show up as a separate player in > LMS. For example, I have a Yamaha receiver in my basement. The main zone > shows up via Airplay as Basement. The receiver's Zone 2 is wired to > speakers in my back yard. I'd like to have an additional player in LMS > called Backyard, that would use Airplay to play to Zone 2 of the Yamaha > receiver. Currently, I can do this by choosing the Basement player in > LMS, then switching over to the Yamaha remote app, turning on Zone 2 for > Airplay, and turning off Zone 1. It works, but it's cumbersome, and it > will interrupt anyone using the receiver in the basement (Main Zone). > The Denon has a similar set up, with the main zone in one room and Zone > 2 in another. > > Both the Yamaha and the Denon can be controlled over IP, and I do have > the control protocols. So, what I'd like to know is whether there is a > way to: > > 1. Set up two players in LMS/Airplay Bridge for each receiver, one for > the main zone and one for Zone 2; > 2. Whenever a player is selected, have LMS send the necessary control > codes to the appropriate receiver to configure it to play to the proper > zone. > > Before I spend a lot of time trying to figure out how to do this, I > thought I'd check in here to see if someone had already had success with > something similar, or had tried and determined it was impossible. > > Thanks for any help you can give. Thats is not easily doable. Each player advertises itself as a single unit, not one unit per zone. So you would have to modify the helper to create 2 bridge players for each detected airplay player and then associate the « special command » to select the zone. From a software development this is doable but this is a fair bit of custom code that I would not be able to make generic. If you know your way to C, you can do that LMS 8.1.x on Odroid-C4 - *SqueezeAMP!*, 5xRadio, 5xBoom, 2xDuet, 1xTouch, 1xSB3. Sonos PLAY:3, PLAY:5, Marantz NR1603, Foobar2000, ShairPortW, 2xChromecast Audio, Chromecast v1 and v2, Squeezelite on Pi, Yamaha WX-010, AppleTV 4, Airport Express, GGMM E5, RivaArena 1 & 3 philippe_44's Profile: http://forums.slimdevices.com/member.php?userid=17261 View this thread: http://forums.slimdevices.com/showthread.php?t=105198 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ANNOUNCE: AirPlay Bridge = integrate AirPlay devices with LMS (squeeze2raop)
I'm new to this forum, and new to LMS/Squeezebox, but I'm experienced with home automation and networking. I have LMS and the Airplay Bridge running on a Raspberry Pi, and they are working well. I have 2 AV receivers, a Yamaha and a Denon, and both have Airplay. They are both detected by Airplay Bridge and are working properly. What I would like to be able to do is use the Zone 2 feature on each of the receivers, ideally having Zone 2 show up as a separate player in LMS. For example, I have a Yamaha receiver in my basement. The main zone shows up via Airplay as Basement. The receiver's Zone 2 is wired to speakers in my back yard. I'd like to have an additional player in LMS called Backyard, that would use Airplay to play to Zone 2 of the Yamaha receiver. Currently, I can do this by choosing the Basement player in LMS, then switching over to the Yamaha remote app, turning on Zone 2 for Airplay, and turning off Zone 1. It works, but it's cumbersome, and it will interrupt anyone using the receiver in the basement (Main Zone). The Denon has a similar set up, with the main zone in one room and Zone 2 in another. Both the Yamaha and the Denon can be controlled over IP, and I do have the control protocols. So, what I'd like to know is whether there is a way to: 1. Set up two players in LMS/Airplay Bridge for each receiver, one for the main zone and one for Zone 2; 2. Whenever a player is selected, have LMS send the necessary control codes to the appropriate receiver to configure it to play to the proper zone. Before I spend a lot of time trying to figure out how to do this, I thought I'd check in here to see if someone had already had success with something similar, or had tried and determined it was impossible. Thanks for any help you can give. Canadave's Profile: http://forums.slimdevices.com/member.php?userid=71506 View this thread: http://forums.slimdevices.com/showthread.php?t=105198 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
Aesculus wrote: > Note if you make changes you have to restart the LMS. I've found through experience that, while this may be true for some of the settings, most changes take place immediately without having to restart LMS. Sam SamY's Profile: http://forums.slimdevices.com/member.php?userid=63495 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
Hi Aesculus, I found it just after you posted your reply. Thanks ! - Patrick madpatrick's Profile: http://forums.slimdevices.com/member.php?userid=4929 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
madpatrick wrote: > Thanks for your reply. > I've installed the plugin by the plugin section, but i don't see any > settings page for this plugin > Could this be that i'm on LMS : 8.1.1 - 1610364019 ? Go to the Player menu in Settings and you will find the ability to add the Plugin there. Note if you make changes you have to restart the LMS. See https://github.com/aesculus/denonavpcontrol Chris Aesculus's Profile: http://forums.slimdevices.com/member.php?userid=14876 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
Thanks for your reply. I've installed the plugin by the plugin section, but i don't see any settings page for this plugin Could this be that i'm on LMS : 8.1.1 - 1610364019 ? - Patrick madpatrick's Profile: http://forums.slimdevices.com/member.php?userid=4929 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] squeezelite on raspberrypi=>zero mac address for multiple players=>server screws up
Since any method discussed requires changing some settings from default I think the method of just hard coding the MAC address is the most efficient as there is no dependence on the passing of time. Here's the setting I'm using which seems to work fine whether the whole platform is coming up from a power failure or just a restart of individual components on my network. +---+ |Filename: Squeezelite Settings.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=33773| +---+ Main system - Rock Solid with LMS 8.1.2 on WHS 2011 - 2 Duets and Squeeseslave Cabin system - Rock solid with LMS 8.1.2 on Win10 Pro - 1 RPi 3 Model B/Hifiberry DAC+ Pro/PiCorePlayer and Squeezeslave Squeezebox Boom - "At Large" player around both home and cabin Headphones and car - Android phone/Bluetooth w/full library on MicroSD card - PowerAmp music player app (similar to Material Skin) w3wilkes's Profile: http://forums.slimdevices.com/member.php?userid=22973 View this thread: http://forums.slimdevices.com/showthread.php?t=106591 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
madpatrick wrote: > Hi, > Just saw this post about the Denon plugin for the first time. > Im looking for a new receiver to replace my current. > The functionality/integration with LMS would be great > If the plugin can control the receiver this would be way step forward. > > Does this plugin all Denon AVR receivers ? Or is it limited to certain > or older models ? We are using the same protocol that is supported in the Denon 2021 AVRs. Just make sure that your AVR is in Network Standby Mode or the commands will not be received when it is not on. Chris Aesculus's Profile: http://forums.slimdevices.com/member.php?userid=14876 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Music & Artist Information plugin
Thanks, Michael! Let me know if you want me to test anything. E.g., with Erlands plug-ins. mps's Profile: http://forums.slimdevices.com/member.php?userid=36351 View this thread: http://forums.slimdevices.com/showthread.php?t=99537 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ANNOUNCE: YouTube Plugin (API v3)
philippe_44 wrote: > I just realized that you might have your cake and eat it. It seems that > there is a way to have the "play" icon to play from beginning *and* a > link to go one level down to have choice. I'll verify it works with > controllers as well.Thanks Philippe, That sounds good. I assume having "play" icon next to item will also make this item playable when using folder/channel/whole list play button. Is that correct? If so SB Radio preset should play all items from subscribed channel/playlist. Just to clarify again what I meant previously .. For example item 5 (Bob James) on this queue was previously played (partially) and three dots next to it are now missing. 33769 If I click on it I get choice to start from beginning or previous position 33770 But main problem is that if I try to play whole channel (all items) from top play icon or level up (which is mapped to my radio preset) Bob James will be skipped completely / not added to the queue BTW Both Material and Radio interface behave same way. Thanks +---+ |Filename: Screenshot_20210314-151630.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=33770| +---+ 3x Squeezebox Touch, 4x Squeezebox Radio, Squeezelite (RPi 3B with HiFiBerry DAC+Pro on OSMC), Material Skin Apk, Squeeze Commander, Logitech Media Server Version: 8.2.0 with Material Skin (Docker in DS218+) Jaca's Profile: http://forums.slimdevices.com/member.php?userid=58187 View this thread: http://forums.slimdevices.com/showthread.php?t=105840 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] squeezelite on raspberrypi=>zero mac address for multiple players=>server screws up
This might work ? In beta mode from the pCP main page > Beta functions > Extras > Bootcodes > and increase the wait time I think it's really meant for usb devices attached to the pi but it might serve for your case, or you might be able to configure a cron job to restart squeezelite after booting 33768 ronnie +---+ |Filename: bootcodes.png| |Download: http://forums.slimdevices.com/attachment.php?attachmentid=33768| +---+ Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=106591 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Announce] 'MediaServer' *certified* Alexa skill for LMS
FredFredrickson wrote: > Just wanted to let you know you've got a paid subscriber from me. I hope > my meager contribution helps keep this project alive. LMS for ever! Great to hear - thanks. You had the good fortune of the new easy-setup being available instead of having to create files manually like the pioneers here on the forums. :D As it's new , there has not been so much feedback on it. Was there any step that you struggled with? philchillbill's Profile: http://forums.slimdevices.com/member.php?userid=68920 View this thread: http://forums.slimdevices.com/showthread.php?t=111016 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Announce] LMS-lite certified Smart Home skill for Alexa
FredFredrickson wrote: > Is there a way to tell this skill to play a certain song or artist, or > should I continue using Media Server? Thats not possible in a smart home skill so you will have to continue using MediaServer for those commands. This skill is more for accessing the players for home automation purposes and simple commands. philchillbill's Profile: http://forums.slimdevices.com/member.php?userid=68920 View this thread: http://forums.slimdevices.com/showthread.php?t=111443 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Announce] Squeezelite-X
rgdawson wrote: > Try using the parameters as (Several have claimed this eliminates > pausing issue, YMMV). > > -u E > -b 16384 > > RGDawson > > [EDIT:] Oops, -u E switch is related to WASAPI drivers, not pausing2.7.10 > has no pauses with default buffer (ie. no -b switch). gorman's Profile: http://forums.slimdevices.com/member.php?userid=56 View this thread: http://forums.slimdevices.com/showthread.php?t=108550 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Announce] 'MediaServer' *certified* Alexa skill for LMS
Just wanted to let you know you've got a paid subscriber from me. I hope my meager contribution helps keep this project alive. LMS for ever! 1 Touch 3 Receivers 1 Controller 3 Radios (I think I have a problem) FredFredrickson's Profile: http://forums.slimdevices.com/member.php?userid=16584 View this thread: http://forums.slimdevices.com/showthread.php?t=111016 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] squeezelite on raspberrypi=>zero mac address for multiple players=>server screws up
Man in a van wrote: > I'm unaware of a setting in Squeezelite, if you look in the boot log, > squeezelite is connected after LMS is started which is after waiting for > network. > > Why not try the suggestion I made earlier > ronnie The reason I was looking for a setting in squeezelite was what was said in post #6 of this thread; david.udin wrote: > raspi-config gives you the option to wait for the network when booting > up. This results in the correct mac address being passed to the server, > and obviates the need for using the -m command line parameter in the > squeezelite configuration file. My PiCore Player is just a player, LMS runs elsewhere on my network. This issue raised its head when I experienced a power failure. Compared to the time it takes my router to boot the PiCore Player has been fully up for ages. The wait time for the router would be quite long, but that long wait would only be required when my whole network and devices are booting at the same time. I've decided that since the original illusive setting I was looking for seems to not exist I'll use the "-m" method and hard code the MAC address. This way I won't be dependent on some timer hoping the router gets its boot done before the timer expires. Main system - Rock Solid with LMS 8.1.2 on WHS 2011 - 2 Duets and Squeeseslave Cabin system - Rock solid with LMS 8.1.2 on Win10 Pro - 1 RPi 3 Model B/Hifiberry DAC+ Pro/PiCorePlayer and Squeezeslave Squeezebox Boom - "At Large" player around both home and cabin Headphones and car - Android phone/Bluetooth w/full library on MicroSD card - PowerAmp music player app (similar to Material Skin) w3wilkes's Profile: http://forums.slimdevices.com/member.php?userid=22973 View this thread: http://forums.slimdevices.com/showthread.php?t=106591 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Announce] LMS-lite certified Smart Home skill for Alexa
Is there a way to tell this skill to play a certain song or artist, or should I continue using Media Server? 1 Touch 2 Receivers 1 Controller 2 Radios FredFredrickson's Profile: http://forums.slimdevices.com/member.php?userid=16584 View this thread: http://forums.slimdevices.com/showthread.php?t=111443 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] iPeng support thread
pippin wrote: > Unfortunately that would make iPeng lose the capability to also use > things like lock screen controls, remote control (e.g. from a dock) and > use of the buttons. > You can also not select the App type at runtime. Ah, that explains it. Thanks. benh's Profile: http://forums.slimdevices.com/member.php?userid=6732 View this thread: http://forums.slimdevices.com/showthread.php?t=51929 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Announce] SuperDateTime Screensaver v5.11.0 - Date/Time/Weather/Sports/Stocks
BoomX2 wrote: > I am not sure what to tell you. I have a few Booms and a Classic. They > correctly switch between the screensavers with VU Meter set to show > while playing and SDT set to show while stopped. I do not have a > Transporter to test. Do both screensavers show on top of each other > every time you stop the Transporter? You could try 'Softsqueeze' (https://sourceforge.net/projects/lmsclients/files/softsqueeze/), it has a transporter skin. Ralphy *1*-Touch, *5*-Classics, *3*-Booms, *2*-UE Radio 'Squeezebox client builds' (https://sourceforge.net/projects/lmsclients/files/) 'donations' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=LL5P6365KQEXN=CA_name=Squeezebox%20client%20builds_code=USD=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted) always appreciated. ralphy's Profile: http://forums.slimdevices.com/member.php?userid=3484 View this thread: http://forums.slimdevices.com/showthread.php?t=112122 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
Hi, This saw this post about the Denon plugin for the first time. Im looking for a new receiver to replace my current. The functionality/integration with LMS would be great If the plugin can control the receiver this would be way step forward. Does this plugin all Denon AVR receivers ? Or is it limited to certain or older models ? - Patrick madpatrick's Profile: http://forums.slimdevices.com/member.php?userid=4929 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Music & Artist Information plugin
Do you get the IDs from MusicBrainz? If so, why do they change on each scan (and why are mine so much shorter than MusicBrainz IDs)? No, but some include them in the tags. LMS would then consider different IDs different artists. Lack of those IDs LMS would combine to artists of the same name. How would these plugins interact with the MAI cache? CustomBrowse artist menus use MAI's artist image. https://github.com/erland/lms-custombrowse/blob/1c61b27e75b29c8541d06665fff4cbf895c3a182/src/MenuHandler/BaseMenuHandler.pm#L1092 Likewise, TrackStat most-played (and least played) artist menus get the artist image. https://github.com/erland/lms-trackstat/blob/fe583776eafce682086a0cc2731a8676b67652f6/src/Plugin.pm#L3505 Ok, good to know! But I believe the plugin should continue to work with these IDs. Yes, please share with me. How should I share them? Although based on your mention of MusicBrainz Never mind. I think I already got most of it working (discovering other bugs on the way...). IDs above, I'm not sure my change is the right approach. What if we could put a stable ID in the database (e.g., MusicBrainz if found, and a hash of the artist name if not)? That seems like it could maintain the performance improvement while still addressing the problem of identically-named artists and without the need to change Erland plugins (which is problematic to say the least...). The hash idea is problematic, as it doesn't allow the reverse lookup: if a hash was sent, I'd have to have some hash -> artist mapping somewhere. I think I'll still give the name a try (probably the Musicbrainz ID, too), seeing how much of a problem this really is. ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Music & Artist Information plugin
slartibartfast wrote: > Yes I know I could do that I just wondered what logic found the image > currently used. If I look at discography under artist information all of > albums are by Sky. It seems to be only the images that are incorrect. > Some of the images are of the group but many others including the chosen > artist image are not. [emoji3] > > Sent from my Pixel 3a using Tapatalk Inspired by this Im currently playing the debut. The image is correct in my library but I might have put it there in the dim and distant past. Interestingly MAI produces an Album Review but no Bio so it does seem to have difficulty identifying the artist. This is a needle drop rip from Vinyl VB2.4[/B] STORAGE *QNAP TS419P (NFS) [B]Living Room* Joggler & Pi4/Khadas -> Onkyo TXNR686 -> Celestion F20s *Office* Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s *Dining Room* SB Boom *Kitchen* UE Radio (upgraded to SB Radio) *Bedroom (Bedside)* Pi Zero+DAC ->ToppingTP21 ->AKG Headphones *Bedroom (TV) & Bathroom* SB Touch ->Denon AVR ->Mordaunt Short M10s + Kef ceiling speakers *Guest Room* Joggler > Topping Amp -> Wharfedale Modus Cubes Everything controlled by iPeng & Material on iOS d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051 View this thread: http://forums.slimdevices.com/showthread.php?t=99537 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] announce: ShairTunes2W - Airtunes on LMS (forked version with Windows support)
Hi Philippe, Louroux45 wrote: > > > Since the 14.4 IOS upgrade on my IPhone 8 , I can't airplay to my > squeezbox device (Rasp PI + LMS 8). > > Regards, Thanks to the 0.203.4 upgrade of the plugin, this issue is solved ; all players are shown on the Iphone. Regards Louroux45's Profile: http://forums.slimdevices.com/member.php?userid=66999 View this thread: http://forums.slimdevices.com/showthread.php?t=106289 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Music & Artist Information plugin
d6jg wrote: > Find yourself an image of Sky as you know them and then put it in the > folder you have specified for artist images in place of the one thats > there if indeed you have set MAI to use that setting.Yes I know I could do > that I just wondered what logic found the image currently used. If I look at discography under artist information all of albums are by Sky. It seems to be only the images that are incorrect. Some of the images are of the group but many others including the chosen artist image are not. [emoji3] Sent from my Pixel 3a using Tapatalk slartibartfast's Profile: http://forums.slimdevices.com/member.php?userid=35609 View this thread: http://forums.slimdevices.com/showthread.php?t=99537 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Music & Artist Information plugin
Find yourself an image of Sky as you know them and then put it in the folder you have specified for artist images in place of the one thats there if indeed you have set MAI to use that setting. VB2.4[/B] STORAGE *QNAP TS419P (NFS) [B]Living Room* Joggler & Pi4/Khadas -> Onkyo TXNR686 -> Celestion F20s *Office* Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s *Dining Room* SB Boom *Kitchen* UE Radio (upgraded to SB Radio) *Bedroom (Bedside)* Pi Zero+DAC ->ToppingTP21 ->AKG Headphones *Bedroom (TV) & Bathroom* SB Touch ->Denon AVR ->Mordaunt Short M10s + Kef ceiling speakers *Guest Room* Joggler > Topping Amp -> Wharfedale Modus Cubes Everything controlled by iPeng & Material on iOS d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051 View this thread: http://forums.slimdevices.com/showthread.php?t=99537 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Music & Artist Information plugin
Talking about Artist images how does MAI find the image for an artist? I have one Sky album from Spotify in my library and no local albums and the found image certainly doesn't look like Sky to me. [emoji3][image: https://uploads.tapatalk-cdn.com/20210314/2b2cb57bc6a2b90719c9d4a682acf5bb.jpg] Sent from my Pixel 3a using Tapatalk slartibartfast's Profile: http://forums.slimdevices.com/member.php?userid=35609 View this thread: http://forums.slimdevices.com/showthread.php?t=99537 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] squeezelite on raspberrypi=>zero mac address for multiple players=>server screws up
w3wilkes wrote: > I was just wondering if the setting in Squeezelite to tell it to wait > for network connect is in the PcorePlayer configuration. I'm unaware of a setting in Squeezelite, if you look in the boot log, squeezelite is connected after LMS is started which is after waiting for network. Why not try the suggestion I made earlier 33762 ronnie +---+ |Filename: network wait.png | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=33762| +---+ Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=106591 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Announce] Squeezelite-X
Thank you, Paul! It works now. I still have the two questions. Thank you so much! dragosmanea wrote: > Hey! I am new to this software. I am starting to discover it because I > like it's sound. A little laid back and more 3D than Jriver used before. > I also like the Android remote. > So, I am using it o a W10 laptop, and I want to ask you a few > questions: > > 1. When I play DSD files, the DAC shows me it's maxim sample rate in > PCM, but not DSD. The checkbox: DSD Player is checked in the Plugins > page. When I play the same track in Jriver, the DAC shows DSD. What can > I do to play DSD files in DSD format? > > 2. SOLVED! > > 3. How do you describe the sound of SqueezeliteX versus Jriver or other > software? I just discovered SqueezeliteX a few months back, but it had > some problems playing Tidal. Now they play ok. My oppinion is that > Jriver has more power and dynamics, the sound is more "in your face". > Squeezelite is more laid back, it has less force, but the soundstage has > more depth and the sound is more 3D. > > Thank you! dragosmanea's Profile: http://forums.slimdevices.com/member.php?userid=71051 View this thread: http://forums.slimdevices.com/showthread.php?t=108550 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Material Skin
cpd73 wrote: > Add semi-transparent background when showing rating in portrait > now-playing. Yes, this is much more visible now! Thank you very much! pi4 4gb picoreplayer with lms and squeezelite for usb inside an argon one case pi3b+ (7\" display, hifiberry dac+ pro) picoreplayer with squeezlite/jivelite for hifiberry and bluetooth headphone inside a smartipi touch case two airport express ikea symfonisk carsten_h's Profile: http://forums.slimdevices.com/member.php?userid=69113 View this thread: http://forums.slimdevices.com/showthread.php?t=109624 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
