plasticator2 wrote:
> Even that's a step too far! But I use Music IP to do the fingerprinting
> but Spicefly to choose the tracks. AFAIK that is very difficult to run
> on the Pi but if you know otherwise I'd be very keen to hearI don't use
> spicefly but there are a couple of ways to
bpa wrote:
> JUst checked code for both infobrowser and CDplayer.
>
> When trying to write OMPL files - the plugins behave as follows
>
> If LMS "playlistdir" directory exists and OPML file can be written to it
> - it is written out.
> OTHERWISE
> OPML file will be written into LMS
castalla wrote:
> Something strange... I uninstalled infobrowser. Removed the existing
> opml file. Reinstalled infobrowser.
> Now there's no sign of infobrowser.opml anywhere. The plugin itself
> still works.
Strange. infobrowser is just a signpost not the goal - I don't know if
it is has
bpa wrote:
> Strange. infobrowser is just a signpost not the goal - I don't know if
> it is has an internal backup.
>
> The opml files belonging to CDplayer are the ones to find.
> The opml files are somewhere - LMS has a series of fallbacks positions
> if it cannot write in preferred
bpa wrote:
> At the moment I can't see why a network folder should cause problems. If
> there is a problem, the opml files will point the way.
>
> So first, find the OPML file generated by the CDplayer plugin and see
> whether files are not being deleted.
Something strange... I uninstalled
slartibartfast wrote:
> You could have installed MusicIP on the Pi if you had installed Raspbian
> instead of pCP [emoji2]
>
> Sent from my Pixel 3a using Tapatalk
Even that's a step too far! But I use Music IP to do the fingerprinting
but Spicefly to choose the tracks. AFAIK that is very
JUst checked code for both infobrowser and CDplayer.
When trying to write OMPL files - the plugins behave as follows
If LMS "playlistdir" directory exists and OPML file can be written to it
- it is written out.
OTHERWISE
OPML file will be written into LMS "cachedir" - if that fails - a log
Is it possible to show the time of the last data refresh? It would help
me to see issues with my PWS.
BTW: SDT now takes up to 10 minutes before showing first data after
re/starting LMS. A few updates before it took not more than a minute.
Did you change the startuptime?
Also there was a field
thanks for that, definately not present in the mobile view though
PiCorePlayer 7.1 on Allo Digi One Signaturewith (Lounge)
PiCorePlayer 8.1 with pi official touchscreen and hifiberry Dig+
(Office)
PiCorePlayer 8.1 with pi official touchscreen and hifiberry
DAC+(Kitchen)
Radio (Bedroom)
markiii wrote:
> thanks for that, definately not present in the mobile view though
Mark
>From the Queue screen press the 3 dots top right?
37184
+---+
|Filename: transfer.jpg |
markiii wrote:
> thanks for that, definately not present in the mobile view thoughYes it
> is.37183
Sent from my Pixel 3a using Tapatalk
+---+
|Filename: Screenshot_20220209-101127.jpg |
|Download:
markiii wrote:
> thanks for that, definately not present in the mobile view though
Sorry, but it definetley is - I have just confirmed. However, it is
*only* shown when viewing the queue and if you have 2 players or more.
*Material debug:* 1. Launch via http:
kidstypike wrote:
> 37184
Your fonts look bad there. I guess you are using the option for larger
font size option? Seeing as you are using the APK, perhaps just use its
zoom setting? This will increase the size of all items.
*Material debug:* 1. Launch via http:
markiii wrote:
> might be we are at cross purposes.
>
> there is an icon bar in queue view and it does indeed have an icon with
> 2 opposing arrows for transferring the queue
>
> however i'm taking about a menu item on the 3 dot dropdown where
> settings and information are shown. In desktop
markiii wrote:
> might be we are at cross purposes.
>
> there is an icon bar in queue view and it does indeed have an icon with
> 2 opposing arrows for transferring the queue
>
> however i'm taking about a menu item on the 3 dot dropdown where
> settings and information are shown. In desktop
cpd73 wrote:
> Your fonts look bad there. I guess you are using the option for larger
> font size option? Seeing as you are using the APK, perhaps just use its
> zoom setting? This will increase the size of all items.
It was set to use the Larger font, I've changed it now to Regular, and
The Groundsman wrote:
> I used to be with Deezer before moving to Spotify ages ago. I liked it a
> lot and there seemed to be less licencing issues. The issue for me was
> that there were quite severe limitations on playlist size. 2000 v 1
> on Spotify.
>
> I am a bit weird I know but most
cpd73 wrote:
> It is placed in the menu if there is insufficient space in the toolbar.
> If you resize the queue portion on the desktoplayout you will see it
> appear and dissapear. Likewise if you use the mobile layou ton a PC an
> dresize the window you will see the same. On most mobile
markiii wrote:
> correct
And it is there too. Makes no difference to the skin, mobile phone or
mobile on PC.
*Material debug:* 1. Launch via http: //SERVER:9000/material/?debug=json
(Use http: //SERVER:9000/material/?debug=json,cometd to also see update
messages, e.g. play queue) 2. Open
markiii wrote:
> aha thanks that explains it.
>
>
> does it use the Music walk with me plugin? or is it a standalone
> function?
Standalone.
*Material debug:* 1. Launch via http: //SERVER:9000/material/?debug=json
(Use http: //SERVER:9000/material/?debug=json,cometd to also see update
great thanks, thats one more plugin i can remove then
PiCorePlayer 7.1 on Allo Digi One Signaturewith (Lounge)
PiCorePlayer 8.1 with pi official touchscreen and hifiberry Dig+
(Office)
PiCorePlayer 8.1 with pi official touchscreen and hifiberry
DAC+(Kitchen)
Radio (Bedroom)
PiCorePlayer 8.1
Okay... Found opml file in the cache dir
There are only 3
CD-RAW
CDTOC
CDPlayer-release-001
castalla's Profile:
castalla wrote:
> Okay... Found opml file in the cache dir
>
> There are only 3
>
> CD-RAW
> CDTOC
> CDPlayer-release-001
Each of these represents a menu so on the WebGUI - there should be 3
menu
- CD with name
- CD RAw
Do you see only 2-3 menu itesm in CDplayer menu ?
Can you zip and
bpa wrote:
> Each of these represents a menu so on the WebGUI - there should be 3
> menu
> - CD with name
> - CD RAw
>
> Do you see only 2-3 menu itesm in CDplayer menu ?
> Can you zip and attach to a post ?
>
> A side issue - I have found a strange behaviour of PCP that my USB drive
> (with
castalla wrote:
> Do you want the opml files zipped?
>
> Yes - 3 menu items : album title, raw files, eject
>
> Overall the menu switching is sluggish (compared to old win10 pc)
If you can play tracks - there is no need for zipped files.
Please zip the opml files if there are problems,
bpa wrote:
> If you can play tracks - there is no need for zipped files.
> Please zip the opml files if there are problems, such as If you go into
> cdplayer "album title" and you do not get a list of track and you cannot
> play track 1.
>
> When you go into CD player - CD drive has to read
bpa wrote:
> Device shouldn't matter as it is 44.1/16 - which all player play
> natively.
>
> Can you enable player.source to INFO when playing a track and post the
> log between start of playing track and say 30 secs into the track
The first track plays - moving timeline. I let it play for
castalla wrote:
> Here's the log which does show some playing entries
There is an edit near the end - it is not clear why the "reset"
happened. If it is a timeout it means either cdd2wav wasn't streaming
data from the CD or Flac ocnversion was broken. Command string being
used is shown below.
lomcovaks wrote:
> Hi Philippe,
>
> I recently upgraded my Pi3 1Gb LMS system to a Pi4 8Gb with external SSD
> and had to reconfigure my YouTube plugin.
>
> I worked my way around the project creation and OAuth configuration
> screens fairly well and authorised the plugin to access LMS.
>
>
castalla wrote:
> The track plays but there's no sound...
>
> I'm using an SB Radio as the player.
Device shouldn't matter as it is 44.1/16 - which all player play
natively.
Can you enable player.source to INFO when playing a track and post the
log between start of playing track and say 30
Here's the log which does show some playing entries
22-02-09 17:03:38.4744] Plugins::CDplayer::CDhandler::renderAsOPML (801)
Creating eject menu entry. Executable found =/usr/bin/eject
[22-02-09 17:03:38.4871] Slim::Player::StreamingController::stop (2117)
00:04:20:2d:a8:14
[22-02-09
bpa wrote:
> There is an edit near the end - it is not clear why the "reset"
> happened. If it is a timeout it means either cdd2wav wasn't streaming
> data from the CD or Flac ocnversion was broken. Command string being
> used is shown below.
> >
Code:
> >
>
castalla wrote:
> I think the reset is when I stopped playback by clearing the queue.
>
> Will try the command line.
OK so, the command line with cdda2wav works.
I expect the flac also works since it is bundeled with PCP and totally
standard.
Code:
The buffer prooess is fast.
By sluggish I meant the time the gui items can be swit ched.
I notice this line in the log (in red)
17:03:38.5070] Slim::Player::TranscodingHelper::getConvertCommand2 (490)
Error: Didn't find any command matches for type: cdplay
Is this relevant?
17:03:38.5070]
castalla wrote:
> The buffer prooess is fast.
>
> By sluggish I meant the time the gui items can be swit ched.
Again - what is sluggish ?
There is a delay to go into the CDplayer menu as CD TOC has to be read
Also when a track is played there is a delay as CD has to be started up.
These are
_ _ ___ __
___ (_) ___/__ ___ / _ \/ /__ ___ _
/ _ \/ / /__/ _ \/ __/ -_) ___/ / _ `/ // / -_) __/
/ .__/_/\___/\___/_/ \__/_/ /_/\_,_/\_, /\__/_/
/_/ /___/
piCorePlayer = piCore + Squeezelite + Raspberry Pi
The software is
Looking though the server.log
Code:
[22-02-09 19:53:50.8794] Slim::Player::Song::open (362)
More mystery...
I set up a new server. Installed the cddcwav extension and plugin.
Radio as player.
Track 1 shows as playing via the Web gui.
On the radio itself, the now playing screen shows the artwork and a
buffering line which is seemingly stuck at 11%
I need to revert back to the
Hi xetroV,
I had a similar issue with my C10, and user SteveShort found a solution.
See his post '#1952'
(https://forums.slimdevices.com/showthread.php?105198-ANNOUNCE-AirPlay-Bridge-integrate-AirPlay-devices-with-LMS-(squeeze2raop)=1040206=1#post1040206)
That tweak worked for me.
xetroV wrote:
bpa wrote:
> OK - it looks for some reason data is not being read from the cdd2wav
> application.
>
> Anything logged in dmesg when trying to play a track ?
>
> Since I have effectively duplicated the basis of your setup (pi3B+, PCP
> 8.0 , Radio, etc) and it all works for me. I have tested
Dmesg while playing
2.049503] host=pCP
[2.049507] tz=CET-1CEST,M3.5.0,M10.5.0/3
[2.049512] waitusb=2
[2.059030] Indeed it is in host mode hprt0 = 00021501
[2.101397] mmc1: new high speed SDIO card at address 0001
[2.115932] mmc0: host does not support reading
bluetdi wrote:
> Is it possible to show the time of the last data refresh? It would help
> me to see issues with my PWS.
I can look at adding this in a future release. Do you want the time
from your LMS server when the refresh was completed? Or the observation
time from your weather station?
mherger wrote:
> > I just so the notice of new version of the plugin?
>
> There was an update to the "New Releases" endpoint which I needed to
> implement. Some user reported differences between the plugin's menus and
>
> the "official" New Releases list. I didn't see these differences, but
Julf wrote:
> I am pretty happy after switching to Deezer (and thanks for everyone
> here who helped me get the LMS integration working!).
I used to be with Deezer before moving to Spotify ages ago. I liked it a
lot and there seemed to be less licencing issues. The issue for me was
that there
might be we are at cross purposes.
there is an icon bar in queue view and it does indeed have an icon with
2 opposing arrows for transferring the queue
however i'm taking about a menu item on the 3 dot dropdown where
settings and information are shown. In desktop view I also have a
transfer
markiii wrote:
> might be we are at cross purposes.
>
> there is an icon bar in queue view and it does indeed have an icon with
> 2 opposing arrows for transferring the queue
>
> however i'm taking about a menu item on the 3 dot dropdown where
> settings and information are shown. In desktop
markiii wrote:
>
> however i'm taking about a menu item on the 3 dot dropdown where
> settings and information are shown. In desktop view I also have a
> transfer queue option, in mobile its not there, regardless of whether
> I'm in queue or now playing
Take a look at the screenshots in the
slartibartfast wrote:
> If the indicated symbol is an infinity symbol then "Don't stop the
> music" is enabled. Of you long press the symbol you will see options
> including disabling the feature.37179
>
> Sent from my Pixel 3a using Tapatalk
Thanks Slartibartfast, that killed it. Didn't know
Track played past 4 mins
+---+
|Filename: server.log (1).zip |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=37194|
castalla wrote:
> Track played past 4 mins
OK - it looks for some reason data is not being read from the cdd2wav
application.
Anything logged in dmesg when trying to play a track ?
Since I have effectively duplicated the basis of your setup (pi3B+, PCP
8.0 , Radio, etc) and it all works for
castalla wrote:
> More mystery...
>
> I set up a new server. Installed the cddcwav extension and plugin.
>
> Radio as player.
>
> Track 1 shows as playing via the Web gui.
> On the radio itself, the now playing screen shows the artwork and a
> buffering line which is seemingly stuck at 11%
castalla wrote:
> Okay will get log.
>
> The cd is powered by an adapter with only data line plugged into the pi.
>
>
> The radio can play Radio Paradise flac stream.
>
> But it's not just the radio - other players are also silent
>
> Log to come later.
OK the CD drive has an external
bpa wrote:
> I have now connected a radio to my pi3B PCP LMS system.
> It all works and there is very little delay.
>
> The buffering number is the amount of data in the player - this seems to
> imply the Radio is part of the problem - only 11% of data got to the
> Radio. I'm guessing not
The last observation time from the PWS might be helpful, I think, as a
local time. But it might be even better if a switch between the
observation and refresh time were possible.
An extra setting field for the time of data refresh at startup is not
necessary for me, I was just curious why it
54 matches
Mail list logo
