Hi,
Please find attached a new port textproc/bibtex2hmtl.
bibtex2html is a collection of tools for translating from BibTeX to
HTML. Please see https://www.lri.fr/~filliatr/bibtex2html/ for details.
I appreciate any tests and comments. Already tested on i386.
Two comments:
1) With
On Fri, Jul 11, 2014 at 03:25:50PM +0100, Stuart Henderson wrote:
1) With USE_SYSTRACE=Yes in /etc/mk.conf, make fake complains about
some mkdir -p. It is innocent but is there a policy to get rid of such
messages?
There isn't. Fixing this issue adds races (and USE_SYSTRACE is only
On Sat, Jul 12, 2014 at 10:36:15AM +0200, Ingo Feinerer wrote:
Please find an updated version of the port attached.
Tested on i386. Now works as expected for me.
Further tests and feedback are appreciated. Ideally someone can commit
the port afterwards.
ping.
There is a test target
at 09:37:58AM +0200, Ingo Feinerer wrote:
On Sat, Jul 12, 2014 at 10:36:15AM +0200, Ingo Feinerer wrote:
Please find an updated version of the port attached.
Tested on i386. Now works as expected for me.
Further tests and feedback are appreciated. Ideally someone can commit
the port
Discussion on baresip is still pending.
FYI: I have been using this baresip port in combination with ZRTP for
about a week. Works as expected. Tested on i386.
There are some improvements in ZRTP handling in baresip already
committed upstream which are not included in this release but I think
Update textproc/hevea to 2.23:
- Remove patches/patch-Makefile
(appears to work without; tested on amd64)
- FONT FACE=symbol facility is no longer used, so skip the note in
pkg/DESCR
(see usr/local/share/doc/hevea/browser.html)
- tetex - texlive
- Nitpicking: latex - LaTeX, Ocaml - OCaml
Update to ddrescue 1.19:
- License changed to GPL version 2 or later (see ChangeLog)
- Use CONFIGURE_ARGS to get rid of patches/patch-configure
(however, my below cvs diff -Nup output does not show
the removal of the file ...)
- No need for INSTALL_TARGET
Best regards,
Ingo
Index: Makefile
Update converters/enca to 1.16:
- Add converters/p5-Unicode-Map8 to BUILD_DEPENDS
(since the configure script checks for umap)
- Use SEPARATE_BUILD
- Enable librecode interface
Note: I could not enable the iconv interface (using
--with-libiconv-prefix=${LOCALBASE} in CONFIGURE_ARGS)
-
Hi,
I submitted an update for hevea some time ago
(https://marc.info/?l=openbsd-portsm=142670359128624w=2). Technically
it is the same diff as yours but please consider my proposal for
updating the pkg/DESCR file as well (as the FONT FACE=symbol stuff is
no longer true with version 2.23).
Ping.
On Sat, Mar 21, 2015 at 08:22:51AM +0100, Ingo Feinerer wrote:
Update converters/enca to 1.16:
- Add converters/p5-Unicode-Map8 to BUILD_DEPENDS
(since the configure script checks for umap)
- Use SEPARATE_BUILD
- Enable librecode interface
Note: I could not enable the iconv
Update of devel/bison to 3.0.4
(another update in my journey to have a recent math/octave):
- Removal of all patches
(patch-configure can probably disappear but please double check
patch-data_m4sugar_m4sugar_m4 and patch-src_output_c)
- configure checks for Java and cannot be disabled via a
Hi,
I am an occasional Octave (math/octave) user. Newer versions check for
gl2ps. Please find attached a corresponding port for it:
GL2PS is a C library providing high quality vector output for any OpenGL
application.
Please someone test (and commit) it.
There are two nice examples (see
Sadowski raf...@sizeofvoid.org
+MAINTAINER=Ingo Feinerer feine...@logic.at
# GPL
PERMIT_PACKAGE_CDROM= Yes
-WANTLIB= ICE SM X11 Xext Xmu Xss Xt bz2 c cairo \
- ereadline fontconfig freetype glib-2.0 \
- gobject-2.0 icui18n icuuc jpeg lzma m \
+WANTLIB
ping?
(original message with attachment at
https://marc.info/?l=openbsd-portsm=142989681714213w=2)
On Fri, Apr 24, 2015 at 07:31:02PM +0200, Ingo Feinerer wrote:
I am an occasional Octave (math/octave) user. Newer versions check for
gl2ps. Please find attached a corresponding port
Update of math/R to 3.2.0 (released yesterday):
- Delete patches/patch-src_main_Rstrptime_h
This patch was processed upstream (in modified form) upon my request:
https://github.com/wch/r-source/commit/93efce2d8eb870b0554272f392d6a2343ba6ede8
- Remove PREFIX and INSTALL* in FAKE_FLAGS and
On Tue, May 19, 2015 at 04:29:49PM +0200, David Coppa wrote:
On Tue, May 19, 2015 at 4:24 PM, David Coppa dco...@gmail.com wrote:
On Tue, May 19, 2015 at 4:08 PM, Jan Stary h...@stare.cz wrote:
Dear R users,
this is my first time using R; I have this piece of R software
that I am trying
Update of math/gnuplot to 4.6.6:
- Since 4.6.4 install-info is no longer a default make install target,
so gnuplot.info is gone from PLIST
(Btw. there is a gnuplot 5.0 available now as well but it is not fully
compatible with version 4 scripts.)
Best regards,
Ingo
Index: Makefile
On Thu, May 28, 2015 at 05:46:12PM +0200, Ingo Feinerer wrote:
Update of math/maxima from 5.29.1 to 5.36.1:
- patches/patch-src_init-cl_lisp is no longer needed as already included
upstream.
- patches/patch-share_Makefile_in and patches/patch-src_Makefile_in
removed as maxima builds
COMMENT= powerful math/statistics/graphics language
-DISTNAME= R-3.2.0
-REVISION= 1
+DISTNAME= R-3.2.1
SHARED_LIBS= R 3.1
SHARED_LIBS+= Rlapack 31.2# 31.2
@@ -19,7 +18,7 @@ MAINTAINER= Ingo Feinerer feinerer@logi
PERMIT_PACKAGE_CDROM= Yes
WANTLIB
Please find attached an updated version incorporating the feedback from
czarkoff@ and edd@:
- Avoid BUILD_DEPENDS by manually moving files (instead of gsed -i)
(Note: brace expansion is disabled in POSIX mode, i.e.,
mv libtool{,.orig} is not supported)
- Keep Fortran interface disabled until
Another round of improvements suggested by czarkoff@, pirofti@, and
sthen@:
- Include COPYRIGHT file
- Use proper path for examples
- Avoid -patch in PKGNAME; use pl instead
OK?
Best regards,
Ingo
hdf5.tar.gz
Description: application/tar-gz
Please find attached a new port math/hdf5:
https://www.hdfgroup.org/HDF5/
HDF5 is a data model, library, and file format for storing and managing data.
It supports an unlimited variety of datatypes, and is designed for flexible and
efficient I/O and for high volume and complex data. HDF5 is
On Wed, Jun 10, 2015 at 06:59:54PM +0200, Rafael Sadowski wrote:
On Mon Jun 08, 2015 at 06:19:55PM +0200, Ingo Feinerer wrote:
On Thu, May 28, 2015 at 05:46:12PM +0200, Ingo Feinerer wrote:
Update of math/maxima from 5.29.1 to 5.36.1:
- patches/patch-src_init-cl_lisp is no longer
Update of math/qhull from 2011.1 to 2012.1:
- patches/patch-CMakeLists_txt removed as no longer needed
- CFLAGS += -fno-strict-aliasing is no longer needed
Successfully tested on amd64 with x11/kde4/palapeli and WIP math/octave.
OK?
Best regards,
Ingo
Index: Makefile
Update of math/maxima from 5.29.1 to 5.36.1:
- patches/patch-src_init-cl_lisp is no longer needed as already included
upstream.
- patches/patch-share_Makefile_in and patches/patch-src_Makefile_in
removed as maxima builds, installs, and runs fine for me without these
two as well.
On Sat, Aug 15, 2015 at 10:00:13AM +0200, Antoine Jacoutot wrote:
- Add @comment no checksum in pkg/PLIST for lib/R/etc/Makeconf and
lib/R/etc/ldpaths as they are modified by R CMD javareconf (which we
describe in pkg/README); otherwise pkg_delete fails/complains.
Doesn't this mean
Port for recent texinfo 6.0:
---8---
https://www.gnu.org/software/texinfo/
Texinfo is the official documentation format of the GNU project. It was
invented by Richard Stallman and Bob Chassell many years ago, loosely
based on Brian
Please find attached a new port sysutils/ioping:
https://github.com/koct9i/ioping
A tool to monitor I/O latency in real time. It shows disk latency in the
same way as ping shows network latency.
Comments? OKs for import?
Best regards,
Ingo
ioping.tar.gz
Description: application/tar-gz
Since math/octave now ships with is own GUI and
https://qtoctave.wordpress.com/ seems to be gone should we remove
math/qtoctave?
Best regards,
Ingo
ile22 Oct 2015 17:51:51 -
@@ -2,8 +2,7 @@
COMMENT = OpenGL to PostScript printing library
-DISTNAME = gl2ps-1.3.8
-REVISION = 0
+DISTNAME = gl2ps-1.3.9
SHARED_LIBS = gl2ps 0.0 # 1.3
@@ -16,7 +15,7 @@ MAINTAINER = I
Update Maxima 5.37.2 -> 5.37.3
Passes all tests on my amd64 system.
OK?
Best regards,
Ingo
Index: Makefile
===
RCS file: /cvs/ports/math/maxima/Makefile,v
retrieving revision 1.32
diff -u -p -r1.32 Makefile
--- Makefile20 Sep
Update HDF5 1.8.15 Patch 1 -> 1.8.16
- patches/patch-configure is no longer necessary
- Avoid pre-configure as upstream ships proper Makefiles this time
- SHARED_LIBS version numbers are changed based on the information
listed in https://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
(see
Port for GGobi 2.1.11:
---8--
http://www.ggobi.org/
GGobi is an open source visualization program for exploring
high-dimensional data. It provides highly dynamic and interactive
graphics such as tours, as well as familiar graphics
Been a while since I checked in on math/jags to see if anyone might be
willing to test it
(http://marc.info/?l=openbsd-portsm=143282435205752w=2). Would
definitely appreciate it if there are any scientific users of
OpenBSD--people familiar with the fortran toolchains, etc--that could
check
On Sat, Aug 29, 2015 at 07:43:33PM +0200, Ingo Feinerer wrote:
Some comments (with my changes attached to this posting):
- COMMENT: Better use Gibbs than gibbs as it is a last name
- COMMENT: I prefer the wording from the upstream homepage
- Reduced/fixed WANTLIB
- MODULES= fortran defines
Update Maxima 5.36.1 -> 5.37.1:
- Eliminate no_x11 flavor
- patch-configure is now merged in upstream
- No need for patch-maxima_spec_in as we do not build Linux RPM packages
NO_TEST is just set for this release as upstream forgot to include a
file. If you run the tests manually from Maxima,
On Sat, Sep 12, 2015 at 09:23:56AM +0200, Ingo Feinerer wrote:
> On Sat, Sep 05, 2015 at 10:38:18AM +0200, Ingo Feinerer wrote:
> > Update Maxima 5.36.1 -> 5.37.1:
>
> Revised diff attached based on received feedback.
>
> > - Eliminate no_x11 flavor
>
> Keep n
On Sat, Sep 05, 2015 at 10:38:18AM +0200, Ingo Feinerer wrote:
> Update Maxima 5.36.1 -> 5.37.1:
Revised diff attached based on received feedback.
> - Eliminate no_x11 flavor
Keep no_x11 flavor (requested by daniel@).
[ Please note that I changed BUILD_DEPENDS += ${MODTK_RU
Ping?
(Tarball available at
https://marc.info/?l=openbsd-ports=144061117600803=2 )
On Wed, Aug 26, 2015 at 07:43:28PM +0200, Ingo Feinerer wrote:
> Port for GGobi 2.1.11:
>
> ---8<--
> http://www.ggobi.org/
>
On Sun, Sep 13, 2015 at 11:17:45AM +0200, Ingo Feinerer wrote:
> On Sat, Sep 12, 2015 at 09:23:56AM +0200, Ingo Feinerer wrote:
> > On Sat, Sep 05, 2015 at 10:38:18AM +0200, Ingo Feinerer wrote:
> > > Update Maxima 5.36.1 -> 5.37.1:
> >
> > Revised diff at
On Fri, Sep 25, 2015 at 06:39:26AM -0600, David Coppa wrote:
> Now that texlive_texmf-buildset contains the inconsolata TeX package,
> we can build the full documentation for math/R.
Great!
> The diff below does this.
>
> Thanks to Edd for his assistance with TeXLive sorcery.
Thank you.
> OK?
ath
HOMEPAGE= http://www.r-project.org/
@@ -19,10 +19,10 @@ MAINTAINER= Ingo Feinerer <feinerer@logi
PERMIT_PACKAGE_CDROM= Yes
WANTLIB= ICE SM X11 Xext Xmu Xss Xt bz2 c crypto curl \
- cairo readline fontconfig freetype glib-2.0 \
+ cairo r
Hi,
please find attached a new port textproc/extract_url:
---8<-
http://www.memoryhole.net/~kyle/extract_url/
This is a Perl script that extracts URLs from correctly-encoded MIME
email messages. This can be used either as a
On Tue, Jan 05, 2016 at 08:09:17PM +0100, Ingo Feinerer wrote:
> please find attached a new port textproc/extract_url:
Now with the manual patched as suggested (extract_url.pl -> extract_url).
Best regards,
Ingo
extract_url.tar.gz
Description: application/tar-gz
Please find attached a port for libv4l
(identical to the latest version in
https://github.com/jasperla/openbsd-wip/tree/master/multimedia/libv4l):
"libv4l is a collection of libraries which adds a thin abstraction layer
on top of video4linux2 devices. The purpose of this (thin) layer is to
make
Hi,
please find attached a diff to enable libv4l support in baresip.
(Needs multimedia/libv4l which I posted in a previous mail.)
OK?
Best regards,
Ingo
Index: Makefile
===
RCS file:
Update math/hdf5 1.8.16 -> 1.8.17
hdf5 1.10 is not yet supported by Octave, so we should stay with the 1.8
series (https://savannah.gnu.org/bugs/?47858) for the moment.
OK?
Best regards,
Ingo
Index: Makefile
===
RCS file:
On Sun, May 08, 2016 at 09:10:44AM +0200, Ingo Feinerer wrote:
> please find attached a port for pgModeler, the PostgreSQL database
> modeler (http://www.pgmodeler.com.br/).
Now updated for the new 0.8.2 release (see attachment), based on
https://marc.info/?l=openbsd-ports=14626915693
Update multimedia/libv4l 1.10.0 -> 1.10.1
OK?
Index: Makefile
===
RCS file: /cvs/ports/multimedia/libv4l/Makefile,v
retrieving revision 1.6
diff -u -p -r1.6 Makefile
--- Makefile16 Mar 2016 21:19:38 - 1.6
+++ Makefile
Dear useRs,
update math/R 3.3.0 -> 3.3.1
OK?
Best regards,
Ingo
Index: Makefile
===
RCS file: /cvs/ports/math/R/Makefile,v
retrieving revision 1.83
diff -u -p -r1.83 Makefile
--- Makefile6 May 2016 08:52:28 - 1.83
On Thu, Jun 16, 2016, Stuart Henderson wrote:
> > Isn't it strange that libs are linked with an empty soname ?
> > '-shared -Wl,-soname, -fPIC -o libpgmodeler.so.0.0' - suppose that's
> > expected, just hope there are no ill effects.
>
> I think the -soname should get patched away..
Hmm. How?
Hi,
please find attached a new port security/pcsc-cyberjack containing a
REINER SCT cyberJack chipcard reader driver for the PC/SC architecture
(putting my cardreader in a functional state).
Comments? OK to import?
Best regards,
Ingo
pcsc-cyberjack.tar.gz
Description: application/tar-gz
Update multimedia/libv4l 1.8.1 -> 1.10.0.
OK?
Best regards,
Ingo
Index: Makefile
===
RCS file: /cvs/ports/multimedia/libv4l/Makefile,v
retrieving revision 1.3
diff -u -p -r1.3 Makefile
--- Makefile23 Jan 2016 14:03:11 -
On Sat, Jan 30, 2016 at 10:13:18PM +, Stuart Henderson wrote:
> On 2016/01/30 11:37, Ingo Feinerer wrote:
> > Hi,
> >
> > please find attached a new port security/pcsc-cyberjack containing a
> > REINER SCT cyberJack chipcard reader driver for the PC/SC architecture
AME = texinfo-6.1
CATEGORIES = print
@@ -13,7 +15,7 @@ MAINTAINER = Ingo Feinerer <feinerer@lo
# GPLv3
PERMIT_PACKAGE_CDROM = Yes
-WANTLIB += c ncurses
+WANTLIB += c ncurses perl
MASTER_SITES = ${MASTER_SITE_GNU:=texinfo/}
Index: di
Anyone willing to OK this update?
(https://marc.info/?l=openbsd-ports=145978664614262=2)
- Start forwarded message -
Update math/maxima 5.37.3 -> 5.38.0
OK?
Best regards,
Ingo
Index: Makefile
===
RCS file:
Update math/R 3.2.3 -> 3.2.4
OK?
Best regards,
Ingo
Index: Makefile
===
RCS file: /cvs/ports/math/R/Makefile,v
retrieving revision 1.80
diff -u -p -r1.80 Makefile
--- Makefile18 Mar 2016 23:12:18 - 1.80
+++ Makefile
Update math/maxima 5.37.3 -> 5.38.0
OK?
Best regards,
Ingo
Index: Makefile
===
RCS file: /cvs/ports/math/maxima/Makefile,v
retrieving revision 1.33
diff -u -p -r1.33 Makefile
--- Makefile11 Nov 2015 21:10:17 - 1.33
+++
Hi,
I was working on a port which uses devel/scons. Following changes to
scons.port.mk were necessary which appear to fix general problems:
- use the proper path separator ":" as otherwise all but the first path
are ignored
- ensure that MODSCONS_ENV is seen by MODSCONS_BIN
Comments?
Best
Hi,
please find attached a port for Endless Sky, a space exploration and
combat game: https://endless-sky.github.io/
- It needs a few scons.port.mk changes to build:
https://marc.info/?l=openbsd-ports=146125722620300=2
- libjpeg-turbo is preferred which we do not have. Although there is a
Ping?
- Forwarded message from Ingo Feinerer <feine...@logic.at> -
Update math/maxima 5.38.0 -> 5.38.1
OK?
Best regards,
Ingo
Index: Makefile
===
RCS file: /cvs/ports/math/maxima/Makefile,v
retrieving revision
Update math/maxima 5.38.0 -> 5.38.1
OK?
Best regards,
Ingo
Index: Makefile
===
RCS file: /cvs/ports/math/maxima/Makefile,v
retrieving revision 1.34
diff -u -p -r1.34 Makefile
--- Makefile10 Apr 2016 10:26:50 - 1.34
+++
On Tue, May 03, 2016 at 07:58:10PM +0300, Paul Irofti wrote:
> > there is one new patch as configure looks for system zlib >= 1.2.5 (and
> > we only have 1.2.3 in base).
>
> Why is it looking for 1.2.5 specifically?
I do not know. So far R works fine for me with zlib from base.
Best regards,
Dear useRs,
update math/R 3.2.5 -> 3.3.0:
Gets rid of two patches with are now incorporated upstream. However,
there is one new patch as configure looks for system zlib >= 1.2.5 (and
we only have 1.2.3 in base).
OK?
Best regards,
Ingo
Index: Makefile
Hi,
please find attached a port for muttprint, a tool for pretty printing
your mails (http://muttprint.sourceforge.net/).
Some comments:
- RUN_DEPENDS on print/texlive/texmf,-full because lastpage.sty is
needed.
- The perl expression in post-patch was my attempt to insert "=encoding
latin1"
th/statistics/graphics language
-DISTNAME= R-3.2.4
+DISTNAME= R-3.2.5
SO_VERSION=31.2
.for _lib in R Rblas Rlapack
@@ -16,12 +16,10 @@ MAINTAINER= Ingo Feinerer <feinerer@logi
# GPLv2+
PERMIT_PACKAGE_CDROM= Yes
-WANTLIB= ICE SM X11 Xext Xmu Xss Xt b
Hi,
please find attached a port for pgModeler, the PostgreSQL database
modeler (http://www.pgmodeler.com.br/).
Remarks:
- BUILDNUM normally contains the current (build) date and is visible in
the final GUI. I changed it to the version number (for
reproducibility). Is this the right
Hi,
please find attached a port for XMLStarlet, a command line XML toolkit
which can be used to transform, query, validate, and edit XML documents.
(http://xmlstar.sourceforge.net/).
OK to import?
Best regards,
Ingo
xmlstarlet.tar.gz
Description: application/tar-gz
On Thu, Aug 18, 2016 at 02:43:30PM +0200, David Coppa wrote:
> With this patch:
>
> $ diff -u /usr/local/lib/R.prev/etc/Makeconf /usr/local/lib/R/etc/Makeconf
> --- /usr/local/lib/R.prev/etc/MakeconfWed Aug 17 09:50:09 2016
> +++ /usr/local/lib/R/etc/Makeconf Thu Aug 18 14:23:37 2016
Pong?
On Sat, Jan 28, 2017 at 09:43:49AM +0100, Ingo Feinerer wrote:
> Ping?
>
> - Original message -
>
> Hi,
>
> please find attached a port for pdfsandwich,
> a tool to make "sandwich" OCR pdf files.
>
> $ cat pkg/DESCR
> pdfsandwich g
0
SHARED_LIBS += v4l10.0 # 0.0
SHARED_LIBS += v4l20.0 # 0.0
@@ -21,19 +20,21 @@ MAINTAINER = Ingo Feinerer <feinerer@lo
# LGPLv2+
PERMIT_PACKAGE_CDROM = Yes
-WANTLIB += c jpeg m pthread
+WANTLIB += c execinfo jpeg m pthread
MASTER_SITES =
Hi,
regarding your profanity update
(https://marc.info/?l=openbsd-ports=148632353126979=2) 'make
port-lib-depends-check' complains that WANTLIB lacks 'util python2.7'.
This is because configure picks up python and enables Python plugins:
$ profanity -v
...
Build information:
XMPP library:
Ping?
- Original message -
Hi,
please find attached a port for pdfsandwich,
a tool to make "sandwich" OCR pdf files.
$ cat pkg/DESCR
pdfsandwich generates "sandwich" OCR pdf files, i.e. pdf files which contain
only images (no text) will be processed by optical character recognition
Hi,
update textproc/extract_url 1.6 -> 1.6.2
(Minor fixes:
https://raw.githubusercontent.com/m3m0ryh0l3/extracturl/master/NEWS)
OK?
Best regards,
Ingo
Index: Makefile
===
RCS file: /cvs/ports/textproc/extract_url/Makefile,v
Ping (and include minor update to 1.12.3)
On Sat, Feb 04, 2017 at 03:21:53PM +0100, Ingo Feinerer wrote:
> Update multimedia/libv4l 1.10.1 -> 1.12.2.
>
> Following patches can be deleted (now included as such in upstream):
>
> patch-configure_ac
> patch-lib_include_libv4
Hi,
please find attached a port for lemonbar.
$ cat pkg/DESCR
lemonbar (formerly known as bar) is a lightweight bar entirely based on XCB.
Provides full UTF-8 support, basic formatting, RandR and Xinerama support and
EWMH compliance without wasting your precious memory.
Hi,
please find attached a port for PDFMiner, a PDF parser and analyzer.
$ cat pkg/DESCR
PDFMiner is a tool for extracting information from PDF documents. Unlike other
PDF-related tools, it focuses entirely on getting and analyzing text data.
PDFMiner allows one to obtain the exact location of
Hi,
please find attached a port for pdfsandwich,
a tool to make "sandwich" OCR pdf files.
$ cat pkg/DESCR
pdfsandwich generates "sandwich" OCR pdf files, i.e. pdf files which contain
only images (no text) will be processed by optical character recognition (OCR)
and the text will be added to each
13 +13,13 @@ MAINTAINER = Ingo Feinerer <feinerer@lo
# GPLv3
PERMIT_PACKAGE_CDROM = Yes
-WANTLIB += c ncurses perl
+WANTLIB += c iconv intl ncurses perl
MASTER_SITES = ${MASTER_SITE_GNU:=texinfo/}
-MODULES = devel/gettext
BUILD_DEPENDS =
On Mon, Oct 03, 2016 at 12:00:17PM +0100, Edd Barrett wrote:
> On Mon, Oct 03, 2016 at 11:07:13AM +0200, Ingo Feinerer wrote:
> > Update devel/radare2 0.8.8 -> 0.10.6
> >
> > - Needs >= capstone-3.0.4p0
> > - radare-bindings2 is renamed to radare2-bindings li
On Thu, Oct 06, 2016 at 10:28:42PM +0100, Edd Barrett wrote:
> On Tue, Oct 04, 2016 at 04:24:33PM +0200, Ingo Feinerer wrote:
> > OK?
>
> Almost!
>
> In the bindings configure:
>
> ---8<---
> ...
> ==> Using valabind ./configure: ./configure.hook[13]:
Hi,
I have an update for editors/ht to 2.1.0:
- only .tar.bz2 is available now
- regen WANTLIB (via 'make port-lib-depends-check')
- fix whitespace (tab) in Makefile
- remove trailing whitespace in pkg/DESC (portcheck complains about it)
OK?
Best regards,
Ingo
Index: Makefile
On Thu, Aug 18, 2016 at 04:45:08PM +0200, David Coppa wrote:
> The reason is we'd like to remove lang/gfortran from the ports tree.
>
> Revised diff:
OK
> Index: Makefile
> ===
> RCS file: /cvs/ports/math/R/Makefile,v
> retrieving
Update devel/radare2 0.8.8 -> 0.10.6
- Needs >= capstone-3.0.4p0
- radare-bindings2 is renamed to radare2-bindings like upstream
(no quirks diff included yet)
(based on https://marc.info/?l=openbsd-ports=142390088012986=2)
- Use system libraries if possible (capstone, zip)
Works fine for me
Hi,
please find attached a port for pg_activity, a top like application for
PostgreSQL server activity monitoring
(https://github.com/julmon/pg_activity).
OK to import?
Best regards,
Ingo
pg_activity.tar.gz
Description: application/tar-gz
Dear useRs,
update math/R 3.3.1 -> 3.3.2
- remove two FTP mirrors (there are plenty of HTTP)
- add print/texinfo to RUN_DEPENDS as 'R CMD build' needs it
- regen patch
Works for me on amd64.
OK?
Index: Makefile
===
RCS file:
Hi,
update net/syncthing 0.14.5 -> 0.14.9
OK?
Best regards,
Ingo
Index: Makefile
===
RCS file: /cvs/ports/net/syncthing/Makefile,v
retrieving revision 1.10
diff -u -p -r1.10 Makefile
--- Makefile30 Aug 2016 21:05:50 -
Update math/hdf5 1.8.17 -> 1.8.18
The only dependency math/octave still works.
OK?
Best regards,
Ingo
Index: Makefile
===
RCS file: /cvs/ports/math/hdf5/Makefile,v
retrieving revision 1.8
diff -u -p -r1.8 Makefile
--- Makefile
On Thu, Dec 01, 2016 at 07:12:17PM +0200, Paul Irofti wrote:
> On Wed, Nov 30, 2016 at 07:46:25PM +0100, Ingo Feinerer wrote:
> > Update math/hdf5 1.8.17 -> 1.8.18
> >
> > The only dependency math/octave still works.
>
> I see that some library minors changed,
On Sun, Jan 01, 2017 at 09:17:09PM +0100, Jeremie Courreges-Anglas wrote:
> - respect CFLAGS
> - don't hardcode /usr/local and the shared lib version
> - install scripts with... INSTALL_SCRIPT
>
> ok?
OK feinerer@
> Index: Makefile
>
Hi,
update textproc/py-feedparser 5.1.3 -> 5.2.1 and add a python3 flavor at the
same time.
'make test' still passes.
OK?
Best regards,
Ingo
Index: Makefile
===
RCS file: /cvs/ports/textproc/py-feedparser/Makefile,v
retrieving
Hi,
update net/dsocks 1.6 -> 1.7
Now hosted at MASTER_SITE_GOOGLECODE instead of monkey.org.
No visible changes (via nm -g) in .so so keep SHARED_LIBS at 1.0.
Works for me on amd64.
OK?
Best regards,
Ingo
Index: Makefile
===
RCS
Update math/maxima 5.38.1 -> 5.39.0
Changes:
https://sourceforge.net/p/maxima/code/ci/master/tree/ChangeLog-5.39.md
Tested on amd64.
Now requires a recent texinfo to build -> BUILD_DEPENDS on print/texinfo.
OK?
Best regards,
Ingo
Index: Makefile
Dear useRs,
update math/R 3.3.3 -> 3.4.0
(Changes listed at https://cran.r-project.org/doc/manuals/r-release/NEWS.html)
OK?
Best regards,
Ingo
Index: Makefile
===
RCS file: /cvs/ports/math/R/Makefile,v
retrieving revision 1.91
Pong?
(full diff at https://marc.info/?l=openbsd-ports=148741978622315=2)
On Sat, Feb 18, 2017 at 01:04:44PM +0100, Ingo Feinerer wrote:
> Ping (and include minor update to 1.12.3)
>
> On Sat, Feb 04, 2017 at 03:21:53PM +0100, Ingo Feinerer wrote:
> > Update multimedia/libv4l 1
Dear useRs,
update math/R 3.3.2 -> 3.3.3
- The zlib configure version test logic changed so adapt.
- Several R packages (e.g. RCpp) profit from a C++11 compiler, so
mention CXX1X et al. in the README.
- make package reports
LIB_DEPENDS devel/libidn not needed for math/R ?
I am not sure if
On Wed, Mar 08, 2017 at 05:08:19PM +, Stuart Henderson wrote:
> On 2017/03/08 16:34, Ingo Feinerer wrote:
> > update math/R 3.3.2 -> 3.3.3
> >
> > - The zlib configure version test logic changed so adapt.
> > - Several R packages (e.g. RCpp) profit from a C+
Update print/gl2ps 1.3.9 -> 1.4.0
(ChangeLog at http://www.geuz.org/gl2ps/#tth_sEc8)
OK?
Best regards,
Ingo
Index: Makefile
===
RCS file: /cvs/ports/print/gl2ps/Makefile,v
retrieving revision 1.3
diff -u -p -r1.3 Makefile
---
On Wed, Apr 05, 2017 at 02:32:20PM +0300, Paul Irofti wrote:
> On Wed, Apr 05, 2017 at 01:01:52PM +0200, Ingo Feinerer wrote:
> > Update print/gl2ps 1.3.9 -> 1.4.0
> > (ChangeLog at http://www.geuz.org/gl2ps/#tth_sEc8)
> >
> > OK?
>
> I am not a ma
t;make test" seems to work but downloads various dependencies. Should we set
NO_TEST?
OK to import?
Best regards,
Ingo Feinerer
buku.tar.gz
Description: application/tar-gz
1 - 100 of 481 matches
Mail list logo