% size by 0.1%. After this, everything seems to come through
perfectly fine.
Brian Guralnick
- Original Message -
From: [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Wednesday, July 10, 2002 3:45 PM
Subject: Re: [PEDA] Acrobat 5 on Schematics
For the fonts
, July 11, 2002 3:19 PM
Subject: Re: [PEDA] Acrobat 5 on Schematics
For the fonts that don't render correctly you may have to tell the PDF
writer to
embedd the fonts. I haven't seen a problem with the arcs.
Rob
This sometime can be related to the outer margin settings. I usually
set my
Message-
From: Dwight Harm [mailto:[EMAIL PROTECTED]]
Sent: Friday, 12 July 2002 10:36 AM
To: Protel EDA Forum
Subject: Re: [PEDA] Acrobat 5 on Schematics
FWIW, we've generally found Acrobat Distiller to be more
reliable/accurate
than PDF Writer when handling graphics, both from
]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Friday, 12 July 2002 10:57 AM
To: Protel EDA Forum
Subject: Re: [PEDA] Acrobat 5 on Schematics
I've never had a problem making pdf's from my schematics. I use a
postscript
printer, setup to print to file, then use
I agree. I gave up on PDF Writer long ago and use Distiller
exclusively now too. You have much more control over output
options and the overall quality of the pdf file seems better.
Matt Pobursky
Maximum Performance Systems
On Thu, 11 Jul 2002 17:36:16 -0700, Dwight Harm wrote:
FWIW, we've
I have Adobe Acrobat v5.0.5 under Win'98 and '99SE SP6 with 512 MB RAM,
and it works OK on Schematic files with the exception that arcs of certain
diameters located within 20% of the right edge of the sheet are not
rendered at all.
This includes such objects as the arcs used to create AND
PROTECTED]
cc:(bcc: Rob LaMoreaux/DSPT)
Subject: [PEDA] Acrobat 5 on Schematics
I have Adobe Acrobat v5.0.5 under Win'98 and '99SE SP6 with 512 MB RAM,
and it works OK on Schematic files with the exception that arcs of certain
diameters located within 20% of the right edge of the sheet
