At 12:43 PM 3/10/01 +0100, Rudolf Schaffer wrote:
>When using Only Ports Global in a flat design,
>how can i avoid ERC warning messages
>(with default matrix) for unconnected inputs
>without WIRING all the ports in the master sheet
>containing the sheet symbols?
Only Ports Global is used, as men
At 01:41 PM 3/11/01 +0100, Rudolf Schaffer wrote:
>- Effectively, in the sheet where the input pin is connected to
> the port, i don't receive any warning; all is ok; it's only into the master
> sheet i got warnings.
> (If i do the wiring in the master sheet, i don't receive any warning!)
Hello,
When using Only Ports Global in a flat design,
how can i avoid ERC warning messages
(with default matrix) for unconnected inputs
without WIRING all the ports in the master sheet
containing the sheet symbols?
Thank you for your help!
Regards,
Rudolf Schaffer
ASGALIUM UNITEC SA
Rue du Puit
Dwight Harm wrote:
> I think you can either put no-ERC markers (the little red X's on the wiring toolbar)
>on the inputs, or change the rule matrix.
As i wrote to Mr. Abd ul-Rahman Lomax, i will process by a different way for the
future;
Anyway, thank you for your suggestion and help!
Best re
Abd ul-Rahman Lomax wrote:
>
>
> However, I find that a port connected to an input pin suppresses the
> unconnected and floating warnings for that pin unconditionally, so I really
> do not understand the question. I even set the ERC matrix to show a warning
> for an input port connected to an inp
I think you can either put no-ERC markers (the little red X's on the wiring toolbar)
on the inputs, or change the rule matrix.
-Original Message-
From: Rudolf Schaffer [mailto:[EMAIL PROTECTED]]
Sent: Saturday, March 10, 2001 3:44 AM
Hello,
When using Only Ports Global in a flat design