18-21.
> -Original Message-
> From: Igor Gmitrovic [mailto:[EMAIL PROTECTED]]
> Sent: Sunday, June 02, 2002 4:16 PM
> To: 'Protel EDA Forum'
> Subject: Re: [PEDA] Assembly drawing reference designators
>
>
> Dave,
>
> I wish my SMD boards had enoug
Thanks for all your comments.
Igor
-Original Message-
From: Dennis Saputelli [mailto:[EMAIL PROTECTED]]
Sent: Saturday, 1 June 2002 12:46 AM
To: Protel EDA Forum
Subject: Re: [PEDA] Assembly drawing reference designators
some people like the assy dwg to look different than the
-
From: Dave Eloranta [mailto:[EMAIL PROTECTED]]
Sent: Friday, 31 May 2002 10:58 PM
To: 'Protel EDA Forum'
Subject: Re: [PEDA] Assembly drawing reference designators
Igor
My use of the .designator string is because my locator drawing requires all
references visible and where possible with
e done manually and therefore take too much time.
>
> Regards,
>
> Igor
>
> -Original Message-
> From: Dave Eloranta [mailto:[EMAIL PROTECTED]]
> Sent: Friday, 31 May 2002 12:48 AM
> To: 'Protel EDA Forum'
> Subject: Re: [PEDA] Assembly drawing reference
Igor,
I use the .Designator string in my PCB Lib., This insures that it is
place on the board as soon as I place the component on the PCB. When I
design the PCB part I add; assembly out line, .designator, silk screen out
line, keep outs, and placement court yard. As soon as I update the PC
-
From: Igor Gmitrovic [mailto:[EMAIL PROTECTED]]
Sent: Thursday, May 30, 2002 9:29 PM
To: 'Protel EDA Forum'
Subject: Re: [PEDA] Assembly drawing reference designators
Could someone comment on what is the advantage of using .Designator string
as opposed to default
string IMO
would require those to be done manually and therefore take too much time.
Regards,
Igor
-Original Message-
From: Dave Eloranta [mailto:[EMAIL PROTECTED]]
Sent: Friday, 31 May 2002 12:48 AM
To: 'Protel EDA Forum'
Subject: Re: [PEDA] Assembly drawing reference designators
Hi Steve,
Thanks for the reply; I will use this.
John
- Original Message -
From: <[EMAIL PROTECTED]>
To: Protel EDA Forum <[EMAIL PROTECTED]>
Sent: Thursday, May 30, 2002 6:32 AM
Subject: Re: [PEDA] Assembly drawing reference designators
> In a message dated 5/30/
OTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, May 30, 2002 7:32 AM
To: Protel EDA Forum
Subject:Re: [PEDA] Assembly drawing reference designators
In a message dated 5/30/2002 8:16:26 AM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
> How do you set up a text field that ref
11 matches
Mail list logo
