Hi,
I am not able to program the LPC2378. I have connected the programming jumper,
and other connections are all fine. This is what I get after I try to program
the LPC:
pinjalan@mydomain:~$ /opt/isp/lpc21isp -hex -wipe -control -verify -PHILIPSARM
can_a_bus.hex /dev/ttyUSB0 38400 12000
Veri
I think you may need to specify the path of the .hex file you want to load.
I think relative path naming should be fine, but it looks like you are using
absolute for everything else, so that should work too.
-Jeremy
On Sat, Jul 16, 2011 at 1:36 AM, Nagasrinivas Pinjala wrote:
> Hi,
>
> I am no
Jeremy, you are right. What I did not include was the path of the .hex file.
Now everything works great.
Thanks,
Naga
From: Jeremy Booth
To: Nagasrinivas Pinjala
Cc: psas-avionics
Sent: Saturday, July 16, 2011 2:01 AM
Subject: Re: [psas-avionics] LPC2378 Pro
Awesome!
On Sat, Jul 16, 2011 at 9:43 AM, Nagasrinivas Pinjala wrote:
> Jeremy, you are right. What I did not include was the path of the .hex
> file. Now everything works great.
>
> Thanks,
> Naga
>
> --
> *From:* Jeremy Booth
> *To:* Nagasrinivas Pinjala
> *Cc:* ps
Hi,
Now that I know how to program LPC I want to actually write a small program to
make a LED blink. I figured out that I should refer to the LPC manual. I am
overwhelmed by the amount of study to do just to make an LED blink ! I mean
chapter 2 is about memory addressing, chapter 8 is about pin
