Re: [Ql-Users] QPC2 4.04 BUG (RWAP Software)

[George Gwilt via Ql-Users]

> On 23 Apr 2018, at 15:40, Michael Bulford via Ql-Users 
>  wrote:
> 
>> Does anyone know why the following in QPC2 reports "Invalid Channel ID"
>> 
>> WINDOW 448,200,32,16
>> PAPER #1,3
> 

I get no error message.

George
___
QL-Users Mailing List

Re: [Ql-Users] QPC2 4.04 BUG (RWAP Software)

[Michael Bulford via Ql-Users]

> Does anyone know why the following in QPC2 reports "Invalid Channel ID"
>
> WINDOW 448,200,32,16
> PAPER #1,3
>> In fact, any attempt to change #1 after the WINDOW command reports an 
> invalid channel.>> I also found some of the character combinations were not 
> working in 
> v4.04 (eg CTRL SHIFT - did not produce a down arrow).
> That also now works in v4.05 but CTRL \ does not produce the left arrow 
> still.     Hi,    I am using both QPC2 4.04 SMSQE/E 3.26 and also QPC2 4.05 
> SMSQE/E 3.31.They both seem to work the same.I cannot replicate any of the 
> errors mentioned, except that I cannot produce the left arrow.    As Dilwyn 
> points out, doing an OPEN #1, would do an automatic CLOSE #1 first, and 
> perhaps that has caused the problems.    > On QPC2 v4.04 here I didn't have 
> to close anything - I just entered the
> two commands above as soon as it started     Perhaps there is something in 
> the Boot file causing the issue?          Michael

   
___
QL-Users Mailing List

Re: [Ql-Users] QPC2 4.04 BUG

[Dilwyn Jones via Ql-Users]

If you had run the version of the program with an OPEN #1 statement in it at 
line 5400, that may have caused or contributed to the problem. After my 
initial set of comments, I didn't get another chance to look at the program 
so I don't know at what stage that was changed.


I'll add the program to my site when I get back later.

Dilwyn

-Original Message- 
From: Rich Mellor via Ql-Users

Sent: Monday, April 23, 2018 10:07 AM
To: ql-us...@q-v-d.com
Cc: Rich Mellor
Subject: Re: [Ql-Users] QPC2 4.04 BUG

On 23/04/2018 09:57, Bob Spelten via Ql-Users wrote:
Op Sun, 22 Apr 2018 18:00:20 +0200 schreef RWAP Software via Ql-Users 
<ql-users@lists.q-v-d.com>:



Does anyone know why the following in QPC2 reports "Invalid Channel ID"

WINDOW 448,200,32,16
PAPER #1,3

In fact, any attempt to change #1 after the WINDOW command reports an 
invalid channel.



Tested on a bare QPC2v404, this could happen if channel #1 is closed.
The WINDOW command does then not produce an error on the default channel, 
which will be #0 now, but the PAPER #1 command does.


Bob


On QPC2 v4.04 here I didn't have to close anything - I just entered the
two commands above as soon as it started

As stated, this does not happen in v4.05 so there must be something
which has been altered



--
Rich Mellor
RWAP Services
Specialist Enuuk Auction Programming Services

www.rwapservices.co.uk

___
QL-Users Mailing List

---
This email has been checked for viruses by AVG.
http://www.avg.com 


___
QL-Users Mailing List

Re: [Ql-Users] QPC2 4.04 BUG

[Rich Mellor via Ql-Users]

On 23/04/2018 09:57, Bob Spelten via Ql-Users wrote:
Op Sun, 22 Apr 2018 18:00:20 +0200 schreef RWAP Software via Ql-Users 
:



Does anyone know why the following in QPC2 reports "Invalid Channel ID"

WINDOW 448,200,32,16
PAPER #1,3

In fact, any attempt to change #1 after the WINDOW command reports an 
invalid channel.



Tested on a bare QPC2v404, this could happen if channel #1 is closed.
The WINDOW command does then not produce an error on the default 
channel, which will be #0 now, but the PAPER #1 command does.


Bob

On QPC2 v4.04 here I didn't have to close anything - I just entered the 
two commands above as soon as it started


As stated, this does not happen in v4.05 so there must be something 
which has been altered




--
Rich Mellor
RWAP Services
Specialist Enuuk Auction Programming Services

www.rwapservices.co.uk

___
QL-Users Mailing List

Re: [Ql-Users] QPC2 4.04 BUG

[Bob Spelten via Ql-Users]

Op Sun, 22 Apr 2018 18:00:20 +0200 schreef RWAP Software via Ql-Users  
:



Does anyone know why the following in QPC2 reports "Invalid Channel ID"

WINDOW 448,200,32,16
PAPER #1,3

In fact, any attempt to change #1 after the WINDOW command reports an  
invalid channel.



Tested on a bare QPC2v404, this could happen if channel #1 is closed.
The WINDOW command does then not produce an error on the default channel,  
which will be #0 now, but the PAPER #1 command does.


Bob

--
The BSJR QL software site at: "http://members.upc.nl/b.spelten/ql/;

---
Deze e-mail is gecontroleerd op virussen door AVG.
http://www.avg.com

___
QL-Users Mailing List

Re: [Ql-Users] QPC2 4.04 BUG

[Rich Mellor via Ql-Users]

Confirmed - it affected v4.04 but is fixed in v4.05 :)

I also found some of the character combinations were not working in 
v4.04 (eg CTRL SHIFT - did not produce a down arrow).
That also now works in v4.05 but CTRL \ does not produce the left arrow 
still.


Rich

On 23/04/2018 05:24, Wolfgang Lenerz via Ql-Users wrote:


Hi,
no problem with these commands here.

(QPC 4.05; not 4.04)

Wolfgang

Does anyone know why the following in QPC2 reports "Invalid Channel ID"

WINDOW 448,200,32,16
PAPER #1,3

In fact, any attempt to change #1 after the WINDOW command reports an 
invalid channel.


Rich Mellor RWAP Software www.rwapsoftware.co.uk www.sellmyretro.com
___
QL-Users Mailing List



___
QL-Users Mailing List



--
Rich Mellor
RWAP Services
Specialist Enuuk Auction Programming Services

www.rwapservices.co.uk

___
QL-Users Mailing List

Re: [Ql-Users] QPC2 4.04 BUG

[Wolfgang Lenerz via Ql-Users]

Hi,
no problem with these commands here.

(QPC 4.05; not 4.04)

Wolfgang

Does anyone know why the following in QPC2 reports "Invalid Channel ID"

WINDOW 448,200,32,16
PAPER #1,3

In fact, any attempt to change #1 after the WINDOW command reports an 
invalid channel.


Rich Mellor RWAP Software www.rwapsoftware.co.uk www.sellmyretro.com
___
QL-Users Mailing List



___
QL-Users Mailing List