On Tue, Mar 28, 2000 at 06:15:07AM -0700, Irwan Hadi wrote:
Now, after I use Mandrake 6.1 to run tcpserver or tcprules I need to
go to /usr/local/bin first
then
use dot command
./tcprules , ./tcpserver and so on
How to make they can run without giving dot command ? (I tried on RedHat
6.0
Hi,
check /etc/syslog.conf.
cheers.
eh.
At 11:26 29.3.2000 +0700, you wrote:
Hi,
Iam use qmail RPM. And the standard log --- /var/log/maillog
How I change log from /var/log/maillog to /var/log/qmail/.log
and /var/log/qmail/qmail/qmail-pop3d/log ???
Thanks,
Alex
hi all,
just created a mailing list [EMAIL PROTECTED] through ezmlmidx and it
works fine for the users that i add with ezmlm-sub, however when i send a
mail to [EMAIL PROTECTED] i get a message back saying no
mailbox?
do i need to create a /var/qmail/alias/.qmail-all-news-subscribe link to
some
On Wed, Mar 29, 2000 at 06:47:44PM +1000, Marc-Adrian Napoli wrote:
hi all,
just created a mailing list [EMAIL PROTECTED] through ezmlmidx and it
works fine for the users that i add with ezmlm-sub, however when i send a
mail to [EMAIL PROTECTED] i get a message back saying no
mailbox?
Is it possible checking all outgoing email from one domain to see if
they are digital signed, and if not reject (bounce back) the email to
the sender with a message telling them that all outgoing email from that
particular domain must be digital signed?
Please advice
Michael Boman
--
W I Z O
I am going to install AMaViS togeather with the AVP antivirus engine,
and I wonder if there is anyone that has successfully installed it and
could help me if I get problems.
Best regards
Michael Boman
--
W I Z O F F I C E . C O M P T E L T D - Your Online Office Wizard
16 Tannery Lane,
qmail Digest 29 Mar 2000 11:00:00 - Issue 955
Topics (messages 39166 through 39217):
Virtual users and domains
39166 by: Niall Dalton
Re: Qmail + LDAP problems
39167 by: Mitja Sarp
39168 by: blair christensen
39170 by: blair christensen
Re: Closing:
It's hard to make anything out of the information you've supplied. First of all, go
through the logs and see if you can track down this wierd behaviour. Also, check your
Sent-mail box and check the headers for those unknown messages. You might want to try
to send an email without using a MUA.
Troy Frericks [EMAIL PROTECTED] writes on 29 March 2000 at 06:57:18 -0600
At 10:18 AM 3/28/00 , Charles Cazabon wrote:
Randy Bradley [EMAIL PROTECTED] wrote (about unsubscribing):
Instructions in the header or footer would be nice.
I've tried qmail-help, qmail-request to no
I am trying to justify continuing the use of qmail in our organization. Is
there a comprehensive list out there of large organizations that use qmail
and the volume of mail they have pass through their mail exchangers?
Appreciate any insight into this. Thanks.
http://cr.yp.to/qmail/users.html
Hi
I seem to be having probelms with my mail
exchanger.
If I send e-mails with large attachments they
seem to disappear.
I have created the file
/var/qmail/control/databytes and set 500 but still no luck.
Does anyone have any suggestions ?
Thanks
Mark
On Wed, Mar 29, 2000 at 06:57:18AM -0600,
Troy Frericks [EMAIL PROTECTED] wrote:
it would be nice if it were part of the displayable portion of each post.
Almost all other mailing lists do it. This list is being run on qmail, and
qmail has the ability to attach a footer (part of the text
You can find some of this info on www.inter7.com
Original Message
On 3/29/00, 8:45:21 AM, [EMAIL PROTECTED] wrote regarding Qmail
System Users:
I am trying to justify continuing the use of qmail in our
organization. Is
there a comprehensive list out there of large organizations that
Hi
Apologies in advance if this is a dumb question but I'm a newbie and have not been
able to get to the Qmail documentation project site. Whats the deal with this?
I set up qmail as per the 'life with qmail' document from www.qmail.org as well as the
document on setting it up as a multiple
On Tue, 28 Mar 2000 22:36:29 +0200 (CEST), G.Z. wrote:
Any suggestion for an alternative sound-and-simple software for mailing
list management well tested with qmail?
Of course: http://www.ezmlm.org http://cr.yp.to/ezmlm.html
For an example of WWW access, see
Now I've just reinstalled my mandrake linux, because of the apache problem
(it won;t work with the new kernel (2.2.14), so I reinstall the mandrake)
but now , when I
telnet localhost 25
it doesn't give any SMTP banner or anything as usual.
all the qmail directories are NOT deleted, and are their
I've D/Led the c-client for Pine and followed the directions.
The problem is that it simply doesn't compile with pine4.21 and
the latest stable GCC. Is there anywhere I can D/L an already
patched source? All the links that I found in the archives seemed
to have dissapeard. I prefer a
Hi,
A user of ours ,who has his pop account forwarding to another account,
wants me to forward all the mail already in his account to this other
account.
What's the most efficient/clean way to do this.
Thanks in advance.
Cheers,
Del.
You might want to check the man page on qmail-control and go from there. All the
information
you want is in there.
On Wed, Mar 29, 2000 at 02:11:01PM -0300, Ricardo D. Albano wrote:
How can I increment the limit of simultaneous qmail-remote procs. ?
RDA.-
At 3/29/2000 07:38 AM -0600, David Dyer-Bennet wrote or quoted:
As to "almost all other mailing lists" doing it -- not one of the
mailing lists I'm on, over a dozen, puts unsubscribe instructions in a
trailer. Some put it in a header, some nowhere in the message.
I used to think this would be
thanks to claudio jeker for this.
i changed my /var/qmail/rc file from:
#!/bin/sh
exec env - PATH="/var/qmail/bin:$PATH" \
qmail-start "`cat /var/qmail/control/defaultdelivery`"
to:
#!/bin/sh
exec env - PATH="/var/qmail/bin:$PATH" \
LD_LIBRARY_PATH="/opt/openldap/lib:$LD_LIBRARY_PATH" \
On Wed, 29 Mar 2000, Derek Smith wrote:
Hi,
A user of ours ,who has his pop account forwarding to another account,
wants me to forward all the mail already in his account to this other
account.
What's the most efficient/clean way to do this.
If both accounts are on the same pop server,
On Wed, Mar 29, 2000 at 06:49:45PM +0200, maw wrote:
is there a way to have an alias like [EMAIL PROTECTED]
with two dots?
why shouldn't it work ?
create a .qmail-user:name:pseudo file, and that should do it!
Regards,
Olivier
hi all
is it possible to e.g. edit the subject line of each mail for a user
[EMAIL PROTECTED] before it's delivered to his local mailbox or forwarded to the
final address ?
greets
Martin
--
http://www.kos.li/ [EMAIL PROTECTED]
On Wed, Mar 29, 2000 at 06:49:45PM +0200, maw wrote:
Hi,
is there a way to have an alias like [EMAIL PROTECTED]
with two dots?
andrew
echo "realmail@somewhere" ~alias/.qmail-user:name:pseudo
Ricardo
--
+---
| Ricardo
Hi all,
We wish to create mail setup like hotmail for our registered users on
our linux redhat 6.0 server using qmail-1.03. We are paying some pvt.
org. to help us in that, but they have not been able to have much
success.
Any help in this regard will be highly appreciated.
Regards
Alok
It's very easy to do with sqwwebmail,
http://www.inter7.com/freesoftware/
On Wed, 29 Mar 2000, Alok Bhatt wrote:
Hi all,
We wish to create mail setup like hotmail for our registered users on
our linux redhat 6.0 server using qmail-1.03. We are paying some pvt.
org. to help us in
How can I increment the limit of simultaneous qmail-remote procs. ?
RDA.-
Have you considered the qmail-inject program?
A little shell loop to inject the mails then move/remove them is all
that's needed.
Regards.
On Wed, Mar 29, 2000 at 06:00:42PM +0100, Derek Smith wrote:
Hi,
A user of ours ,who has his pop account forwarding to another account,
wants me to
This is slightly off-topic, so I'm going to throw this into the ring
and interested parties should take it to private email. It relates to the
discussion of RPM-izing dnscache.
I've built a set of init scripts for redhat 6.1 (and presumably
other RH vers) that use daemontools
Hi,
We are using Amavis-0.2.0-pre6-clm-rl-5 with qmail 1.03.
When sending or receiving email the server works fine, but since we have
installed Amavis any messages that are rejected (bounced via qmail-send?)
due to "no mailbox here by this name" errors are not bounced back to the
sender. But if
Kai MacTane writes:
But I certainly don't think that including unsubscription instructions at
the bottom of each post will have any effect on the density of unsubscribe
requests.
I used to believe that, but experience has changed me. I include
unsubscribe information, along with the
[EMAIL PROTECTED] writes:
I am trying to justify continuing the use of qmail in our organization. Is
there a comprehensive list out there of large organizations that use qmail
and the volume of mail they have pass through their mail exchangers?
http://qmail.org/ lists quite a number.
Michael Boman writes:
Is it possible checking all outgoing email from one domain to see if
they are digital signed, and if not reject (bounce back) the email to
the sender with a message telling them that all outgoing email from that
particular domain must be digital signed?
You can make
Stephen F. Bosch [EMAIL PROTECTED] wrote on Wed, 29 Mar 2000:
Irwan Hadi wrote:
I'm becoming quite desperate now, because qmail still refuse to run under
init script
I use init script from Live With qmail, and after I've done all the
requirements and do
. /usr/local/sbin/qmail start
it would be nice if it were part of the displayable portion of each
post.
Almost all other mailing lists do it. This list is being run on qmail,
and
qmail has the ability to attach a footer (part of the text message) to
each
email. Why not do it?
most people are intelligent enough to
Hello.
What is the difference between mail sent from my masqueraded/NAT server to my ISP's
mail server and my MUA masqueraded/NAT mail to their server ?
I'm wondering as the server is now getting '550 relaying to user is not allowed' ,
but when I send the same mail from the mua it does go
What is the easiest way to add alias like john: [EMAIL PROTECTED]?
Maybe declare john as a user in user/assign and then something in
alias/.qmail-john?
Thanks,
John
--
John Conover, Open Source Group, 50 Airport Parkway, San Jose, CA 95110
Tel: 408.437.7726, Fax:
I just started using qmail, for outgoing mail only.
(I'm on a DSL line, and the DSL ISP's mail servers are flakey.
Incoming mail -- via a different ISP that hosts my domain -- works
fine. Unfortunately, I can't use their outgoing SMTP server since I'm
not dialed in on one of their
On Wed, 29 Mar 2000, Derek B. Noonburg wrote:
defaultdomain foolabs.com
defaulthostfoolabs.com
idhost foolabs.com
locals localhost.localdomain
me adsl-63-197-235-82.dsl.snfc21.pacbell.net
plusdomain foolabs.com
rcpthosts
Derek, it's possible that the site you are trying to send mail to has
pacbell's DSL IP range in its filters, much like many ISP's filter out AOL
dialups, etc, etc. In this case, you may wish to make friends with someone
close that runs an SMTP server on non filtered space.
I've heard
When i run matchup, it proccess the log but print:
matchup: fatal: unable to write fd 5: file descriptor not open
What it? how i can make matchup work fine again?
Tks,
Jorge Rocha
Mikko Hänninen wrote:
What shell are you using?
Judging from the output, bash.
The "b" was missing, so I couldn't be sure. Ash could be a shell, who am I to say?
=)
-Stephen-
On Wed, 29 Mar 2000, Stephen F. Bosch wrote:
Mikko Hänninen wrote:
What shell are you using?
Judging from the output, bash.
The "b" was missing, so I couldn't be sure. Ash could be a shell, who am I to say?
=)
There is a shell called ash :)
(ekool@ns1)(2/ttyp3)(05:26pm:03/29/00)-
($:~)-
John Gonzalez/netMDC admin wrote:
On Wed, 29 Mar 2000, Stephen F. Bosch wrote:
Mikko Hänninen wrote:
What shell are you using?
Judging from the output, bash.
The "b" was missing, so I couldn't be sure. Ash could be a shell, who am I to say?
=)
There is a shell called ash :)
hi,
just created a mailing list [EMAIL PROTECTED] through ezmlmidx and it
works fine for the users that i add with ezmlm-sub, however when i send
a
mail to [EMAIL PROTECTED] i get a message back saying no
mailbox?
do i need to create a /var/qmail/alias/.qmail-all-news-subscribe link
Hi
I am testing qmail and have a problem in that the rcpthosts file is being
ignored.
For testing purposes I'm just running rc manually and using inetd for the
qmail-smtp.
Everything is installed in the default areas.
If I do a qmail-inject [EMAIL PROTECTED] the log simply says
starting
On Thu, Mar 30, 2000 at 12:03:49PM +1000, Marc-Adrian Napoli wrote:
Two locally delivered domains, "cia.com.au" and "ezeelynx.com.au" - both of
these *must* stay in "locals" and we *cannot* put them in "virtualdomains".
(If we could, this problem would be easily).
I have one particular
On Thu, Mar 30, 2000 at 09:21:11AM +1200, Spiro Harvey wrote:
it would be nice if it were part of the displayable portion of each
post.
Almost all other mailing lists do it. This list is being run on qmail,
and
qmail has the ability to attach a footer (part of the text message) to
In response to my last post on this list, I got email from Joseph
Junkin saying that my mail looked really strange on his system.
Apparently, something is inserting blank lines into the header which
obviously screws things up. I'm attaching a sample below.
I'm using qmail for outgoing
Hi again
I modified the source to qmail-smtpd.c and commented out all of the parts that
check for the relayclient environment variable. My problem of rcpthosts file
being skipped still occurs. The server is happily accepting rcpt to for any
domain.
I then hardcoded a return value into the
On Wed, 29 Mar 2000, Philip Mores wrote:
How can I configure pine using Mailbox instead of using
/var/spool/mail/user ? I tried following the procedure but it doesn't
work. Pine has an error something like "no folder".
What should I do? Could someone give me a step by step procedure on how
On Tue, Mar 28, 2000 at 07:55:25PM +, Uwe Ohse wrote:
[snip]
See http://www.ohse.de/uwe/misc/backupmx.txt for why i dislike
backup mail servers.
'file not found.'
Greetz, Peter.
--
Peter van Dijk - student/sysadmin/ircoper/madly in love/pretending coder
|
| 'C makes it easy to
On Wed, Mar 29, 2000 at 05:47:33PM +0800, Michael Boman wrote:
Is it possible checking all outgoing email from one domain to see if
they are digital signed, and if not reject (bounce back) the email to
the sender with a message telling them that all outgoing email from that
particular domain
Michael Boman wrote:
I am going to install AMaViS togeather with the AVP antivirus engine,
and I wonder if there is anyone that has successfully installed it and
could help me if I get problems.
Please use AMaViS 0.2.0-pre6-clm-rl-6, which is available at
http://www.unixzone.com/virus/ This
This problem can also occur if the script that starts up qmail-pop3d
doesn't properly set the HOST name in the checkpw command line.
-Scott
"Ryszard Lach " wrote:
On Sun, Mar 26, 2000 at 10:19:55PM -0500, Chris Johnson wrote:
On Mon, Mar 27, 2000 at 10:04:09AM +0700, em9652015 wrote:
At 10:18 AM 3/28/00 , Charles Cazabon wrote:
Randy Bradley [EMAIL PROTECTED] wrote (about unsubscribing):
Instructions in the header or footer would be nice.
I've tried qmail-help, qmail-request to no avail.
There's a header in every message that says the following:
After waiting for long time, the SMTP banner then up again
how this could be happened ?
so when I telnet localhost 25, I must wait about 3 minutes to wait until
the SMTP banner up. (qmail is ready)
how to fix this
---
AFLHI 058009990407128029/089802---(102598//991024)
A couple of things could be at work here:
1) Your mail server is running identd and its taking 3 minutes timing out
trying to determine your identity.
2) The IP address you are connecting from is not in DNS properly, so you are
timing out with DNS trying to do a reverse DNS Lookup.
Matt Soffen
On Tue, Mar 28, 2000 at 06:09:09PM -0700,
Irwan Hadi [EMAIL PROTECTED] wrote:
After waiting for long time, the SMTP banner then up again
how this could be happened ?
so when I telnet localhost 25, I must wait about 3 minutes to wait until
the SMTP banner up. (qmail is ready)
how to fix
Hi,
is there a way to have an alias like [EMAIL PROTECTED]
with two dots?
andrew
Irwan Hadi wrote:
I'm becoming quite desperate now, because qmail still refuse to run under
init script
I use init script from Live With qmail, and after I've done all the
requirements and do
. /usr/local/sbin/qmail start
then the result
: command not found
': not a valid identifier
:
Hi,
when I screwed up my DNS settings I observed the same behavior. Thus, check
yours.
cheers.
eh.
At 18:07 28.3.2000 -0700, you wrote:
Now I've just reinstalled my mandrake linux, because of the apache problem
(it won;t work with the new kernel (2.2.14), so I reinstall the mandrake)
but now
On Wed, Mar 29, 2000 at 06:49:12PM +0200, Martin Kos wrote:
hi all
is it possible to e.g. edit the subject line of each mail for a user
[EMAIL PROTECTED] before it's delivered to his local mailbox or forwarded to the
final address ?
Aber natürlich, here is a script to rewrite headers.
Hi,
we need some more configuration details. Pipe /var/qmail/bin/qmail-showctl
to a file and post it in this list.
cheers.
eh.
At 06:32 30.3.2000 GMT, you wrote:
Hi again
I modified the source to qmail-smtpd.c and commented out all of the parts
that
check for the relayclient environment
As requested
qmail home directory: /var/qmail.
user-ext delimiter: -.
paternalism (in decimal): 2.
silent concurrency limit: 120.
subdirectory split: 23.
user ids: 889, 890, 891, 0, 892, 893, 894, 895.
group ids: 505, 504.
badmailfrom: (Default.) Any MAIL FROM is allowed.
bouncefrom:
67 matches
Mail list logo