Hi all,
I tried to install QMT in a newly installed CentOS server but failed.
Here's my server version:
[r...@mx1 qtms-install]# cat /etc/redhat-release
CentOS release 5.5 (Final)
[r...@mx1 qtms-install]# cat /proc/version
Linux version 2.6.18-194.26.1.el5 (mockbu...@builder10.centos.org) (gcc
libsqlite3.so.0 - libsqlite3.so.0.8.6
On 1/8/2011 2:36 AM, Bill Kwok wrote:
Hi all,
I tried to install QMT in a newly installed CentOS server but failed.
Here's my server version:
[r...@mx1 qtms-install]# cat /etc/redhat-release
CentOS release 5.5 (Final)
[r...@mx1 qtms-install]# cat /proc
Thank you all for the help.
It's my fault that I setup a cron job to rsync whole /home folder with my
old machine in order to duplicate all existing email. But I forgot it also
includes all programs in /home/vpopmail/bin while leads to version issues.
I would like to express my appreciation for
Hi Eric,
What's the pros and cons of Dovecot? Will it be worthwhile to replace
Dovecot with Courier-IMAP in standard QMT?
Thx.
Best regards,
Bill
On Sun, Sep 7, 2008 at 12:27 AM, Eric Shubert [EMAIL PROTECTED] wrote:
Jake Vickers wrote:
Service, ColliniConsulting S.a.s. wrote:
Hello,
Hi,
My server runs standard qmt.
I found that user will receive ezmlm probe / warning when both of the
following events are true:
1. Auto-reply has been turned on
2. The user has subscribed to a mailing list and an email is sent to such
mailing list.
I understand that AUTORESPOND uses this
I have some clients (using Outlook 2003) who couldn't send email by using
port 587. After appling SP2 to their machines, it works a little better,
but they still have intermittent problems. I use Thunderbird most of the
time and it works fine. So it gives me a feeling that it should still be a
We are using a standard QMT with several EZMLM mailing list. I would like
to block all email from other domains except a couple. For example, my
mailing list is [EMAIL PROTECTED] I want [EMAIL PROTECTED] to accept all
emails from
all users of xxx.com and yyy.com only but not other domains.
Hi List,
Some of my users' email are forwarded from regional office (another qmail
server). Most emails are fine, except email from google alert. The only
error message I can see is something like this:
Dec31 14:40:12 CHKUSER accepted rcpt: from
[EMAIL PROTECTED]:: remote
On Jan 29, 2008 12:07 AM, Eric Shubes [EMAIL PROTECTED] wrote:
Bill Kwok wrote:
Hi List,
Some of my users' email are forwarded from regional office (another
qmail server). Most emails are fine, except email from google alert.
The only error message I can see is something like
Hi Ahmed,
From your error msg, it shows that your user cannot connect from external IP
to port 25 of your server because they are blocked by RBLSMTP. They will
have to use submission port instead.
Please check your server log files and see if there's anything wrong, such
as:
qq hard reject
Hi all,
I am thinking of using QMTP to send /receive email between our 2 company
email servers.
1. Does QMTP cause any conflict with the current qmt?
2. How do I setup QMTP? Should I add the following line (or
something simiar) to my SMTP run script?
tcpserver -x /etc/qmqp.cdb -u
Hi All,
I got the following from my freshclam.log:
ClamAV update process started at Tue Jun 12 18:02:53 2007
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.90.1 Recommended version: 0.90.3
DON'T PANIC! Read http://www.clamav.net/support/faq
main.inc is up to date
You may have a look about Nick's email:
http://www.mail-archive.com/qmailtoaster-list@qmailtoaster.com/msg04628.html
Best regards,
Bill
On 6/1/07, Adam Cantwell [EMAIL PROTECTED] wrote:
Need some help getting tmomail.net MMS messages into my qmail
server. Gmail.com has
apparently
Dear all,
I try to turn my admin-toaster webpage to become a HTTPS page by changing my
toaster.conf file. But it turns out asking user name and password for every
page. Here's what my file looks like:
IfModule mod_alias.c
ScriptAlias /mail/ /usr/share/toaster/cgi-bin/
Alias
On 5/30/07, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Dear all,
I try to turn my admin-toaster webpage to become a HTTPS page by
changing
my
toaster.conf file. But it turns out asking user name and password for
every
page. Here's what my file looks like:
Check in the archives - I
Dear all,
I am planning to change my ISP and hence the IP address of my server is
going to be changed.
Due to limited resources, I can't setup another server while switching over
to the new IP. My server has around 60 users. I plan to:
1. Shorten the refresh time of my MX record to 900 (15
.
--
*From:* Bill Kwok [mailto:[EMAIL PROTECTED]
*Sent:* Thursday, April 19, 2007 9:12 AM
*To:* qmailtoaster-list
*Subject:* [qmailtoaster] Steps to change the IP address of qmail server
Dear all,
I am planning to change my ISP and hence the IP address of my server is
going
qmail by using 2 NIC?
Thanks in advance.
Best regards,
Bill
On 4/20/07, Janno Sannik [EMAIL PROTECTED] wrote:
isn't using 2 isps in parallel an option?
I have done it like this twice.
works /w 0 downtime.
Bill Kwok wrote:
Dear Jared,
Thank you very much.
Best regards,
Bill
On 4/20/07
messagelabs.com seems require sender's domain with reverse dns. Does your
domain has one?
On 3/20/07, Eric Shubes [EMAIL PROTECTED] wrote:
Perhaps they're using a blocklist that has you listed?
Gabriel Lai wrote:
I've checked it, but I still don understand why only this domain name
cannot
Hi Ashok,
It seems you are connecting to your QT server by using private IP (
192.168.x.x). I guess you've whitelisted such IP range from your tcp.smtp
Best regards,
Bill
On 3/9/07, ashok [EMAIL PROTECTED] wrote:
Dear All,,
I have installed QT in the test PC.
Then I performed the
Hi Tim,
Submission port is the same as SMTP port with the following differences:
1. SMTP port checks your IP against blacklist(s) while Submission port
doesn't
2. Authentication is required when submitting email through Submission port
while it's not required at SMTP port.
Best regards,
Bill
Hi Terry,
When gmail / yahoo sent email out, they will sign the email by their own
domain keys. But when these emails are forwarded from your ISP, the header
has been modified and the signature became invalid. I guess that's the
reason why your server rejects them. Try adding DKVERIFY= to the
Hi Erik,
I receive the qt list well :)
Just have a off-topic question: I want to setup a service in my qt server,
so that when my users send documents to a specific account, it will reply
with a pdf version of the document. Can it be done by just using my
existing qt server?
Best regards,
Hi Erik,
It seems that the standard installation of qt installs both squirrelmail and
qmail at the same server. So I assume the whole submission process happens
within the qt server and localhost doesn't need to check against any RBL.
Besides, I suppose users can only send email through
Hi Slamp,
Thank you for the clarification but sorry for my ignorance. If we have the
*127.0.0.1:allow,RELAYCLIENT=,RBLSMTPD=* in tcp.smtp, will the RBLSMTPD
process still be involved, but just return a pass status?
Best regards,
Bill
On 2/8/07, slamp slamp [EMAIL PROTECTED] wrote:
Thanks
Hi Opik,
If email is in RTF(Rich Text Format, which is a common Outlook email
format), the attachment will be encapsulcated in a winmail.dat file. It
is a known problem that Outlook Express will ignore the file and it makes
the recipient feels that there's nothing inside the email.
If that's
Hi Peter,
1. Please check if your /var/qmail/control/blacklists contains any
obsolete servers and make sure they can respond to you wihtin a resonable
time. You can also minimize your blacklist. Currently, I have only one
entry:
-r zen.spamhaus.org
2. If you connect to the email
Yes, just follow the procedure. Bear in mind that every time you upgrade /
reinstall the qt, the changes will be lost and you will have to do it again.
Best regards,
Bill
On 12/29/06, Lucas Diaz [EMAIL PROTECTED] wrote:
This is valid for a running qmail-toaster?
Thanx a lot.
Lucas.
Bill
Pls check this:
http://www.mail-archive.com/qmailtoaster-list@qmailtoaster.com/msg04641.html
You may want to comment out the #define CHKUSER_LOG_VALID_RCPT line, or
set the CHKUSER_ALLOW_SENDER_CHAR settings
On 12/28/06, Lucas Diaz [EMAIL PROTECTED] wrote:
I'm trying to send a message to an
regards,
Bill
On 12/13/06, Bill Kwok [EMAIL PROTECTED] wrote:
On 12/13/06, Eric Shubes [EMAIL PROTECTED] wrote:
Bill Kwok wrote:
Hi Eric,
My situation was strange. Let me give you detail on my server:
snip
All of them are the current version of qt, except I've also installed
a bit even though I increased it from
5,000,000 to 16,000,000, then even to 24,000,000. Until today I raise it to
32,000,000, then the problem solved.
I don't know if it's related, but I am using RulesDuJour to update my
spamassassin rules.
Good Luck!
Best regards,
Bill
On 12/5/06, Bill Kwok
to. One more thing
to mention: my server need to support multi-language.
Best regards,
Bill
On 12/12/06, Eric Shubes [EMAIL PROTECTED] wrote:
Bill Kwok wrote:
Hi all,
Finally, I found out why I got the status 256 error: the original
softlimit for smtpd is too small.
Good find, Bill
Hi,
My server was running okay until when my self-signed digital cert. expired.
After I regenerated the cert. by using this steps:
cd /usr/share/ssl/certs/
make stunnel.pem
mv stunnel.pem /var/qmail/control/servercert.pem
chown root:qmail /var/qmail/control/servercert.pem
chmod 644
, then
end with status 256. But nothing show up in send or spamd log.
Thank you very much.
Best regards,
Bill
On 12/5/06, Bill Kwok [EMAIL PROTECTED] wrote:
Hi,
My server was running okay until when my self-signed digital cert.
expired. After I regenerated the cert. by using this steps:
cd
, so I can run your
exact script on my server and see what happens?
Thanks
Craig
--
*From:* Bill Kwok [mailto:[EMAIL PROTECTED]
*Sent: * 25 November 2006 07:07
*To:* qmailtoaster-list@qmailtoaster.com
*Subject:* Re: [qmailtoaster] Problem in using Failover replication
Eric,
Thank you very much. I will try it out ASAP. :)
Best regards,
Bill
On 11/26/06, Eric Shubes [EMAIL PROTECTED] wrote:
One more thing (especially for Bill),
If you
# export logdir=/path/to/logs
before running the script, /path/to/logs will override /var/log/qmail
To return to default,
do /home/vpopmail/bin/vuserinfo
randomn users and confirm their details.
Hope that helps. Let me know what unison says after a clearout.
Craig
From: Bill Kwok [mailto:[EMAIL PROTECTED]
Sent: 27 November 2006 10:41
To: qmailtoaster-list@qmailtoaster.com
auth to send.
Thanks,
Erik
On 11/27/06, Bill Kwok [EMAIL PROTECTED] wrote:
Please correct me if I am wrong. What Erik means is that, by default,
all
SMTP communication will go through port 25. It includes server to
server
and client to server communication. If you setup rblsmtpd (or similar
if you
switch to the backup.
Sorry for the slow reply been mad busy.
Regards
Craig
--
*From:* Bill Kwok [mailto:[EMAIL PROTECTED]
*Sent:* 23 November 2006 09:30
*To:* qmailtoaster-list
*Subject:* [qmailtoaster] Problem in using Failover replication Setup
Hi all
On 11/23/06, Eric Shubes [EMAIL PROTECTED] wrote:
Bill Kwok wrote:
You are right.
(lucky guess, and a nice objective that I honestly hadn't considered)
To shorten the output is my main goal:
1. TAI64 time stamp - To allow user select date format. My
understanding
Hi all,
I am trying to setup a setup for failover. Both machines are running CentOS
4.2. I've just installed qt to my backup server, but no domains and users
were setup.
I am having problem in synchronizing them. When I run the qmail-replicatec,
I got the following error:
[EMAIL PROTECTED]
Hi,
You may install the required Perl module by the following command:
# *perl -MCPAN -e 'install Time::TAI64'*
Best regards,
Bill
On 11/22/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Bill,
I am getting errors when I run your script. I may be missing some modules
(I think) bunt don't
The module can be installed by:
# perl -MCPAN -e 'install File::Tail'
Actually, you may add other required modules by the same way.
Best regards,
Bill
On 11/22/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
The module was successfully installed but I still get the same error but
this time
need to install any additional perl
modules in order to use it. :)
Best regards,
Bill
On 11/22/06, Bill Kwok [EMAIL PROTECTED] wrote:
The module can be installed by:
# perl -MCPAN -e 'install File::Tail'
Actually, you may add other required modules by the same way.
Best regards,
Bill
. I'll have to see what
you're doing to shorten things, but I'm guessing that sed or cut might fit
the bill (no pun intended).
Thanks!
Bill Kwok wrote:
There are a few Perl modules which I use in the program. You may run
the following to make sure you've got all of them:
#perl -MCPAN -e shell
Hi Gabriel,
You can use control/taps: http://wiki.qmailtoaster.com/index.php/Taps
Best regards,
Bill
On 11/17/06, Gabriel Lai [EMAIL PROTECTED] wrote:
Hello all,
I remember that there's a function in qmail that enables us to archieve
the email address to [EMAIL PROTECTED]
How can I write
Hi Eric,
I've just tried to upgrade my qt by using qtp-newmodel, it run smoothly
except 2 minor things:
1. Since I've applied qmail-toaster rel. 1.3.8 (so that I can use the
submission port), qtp-newmodel prompts me if I want to apply the change or
not. If I reply yes, the installation
Dear Eric,
Actually, the qtp-newmodel has already made my life much much easier. Thank
you very much for creating such a wonderful program.
Best regards,
Bill
On 11/17/06, Eric Shubes [EMAIL PROTECTED] wrote:
Bill Kwok wrote:
Hi Eric,
I've just tried to upgrade my qt by using qtp
Would you show us your tcp.smtp?
Best regards,
Bill
On 11/13/06, Gabriel Lai [EMAIL PROTECTED] wrote:
It isn't a firewall issue but I have to open relay only it's being resolves...
Seems like it can't authenticate the external users...
When I try to send from 127.0.0.1 (mail server
I've tried to upgrade by upgrade.sh, it's very straight forward. The only concern is that you may have to take down your qmail for a while and wait for all packages to be rebuilt.
Take a look about qmail-toaster plus: http://wiki.qmailtoaster.com/index.php/QmailToaster-Plusand
Dear all,
I use the following line in taps to backup all incoming / outgoing emails of my.domain.com:
.*:[EMAIL PROTECTED]
Myquestions are:
Will it create an endless loop if, by any means, someone sends email to [EMAIL PROTECTED]?
Can I specify a directory, instead of a email ID, as the
Actually, I've tried to use scripts to filter emails for a user after she's lost all her email in her computer. As I've mentioned before, if the user is in the bcc list, we may not be able to find any info of this user from the email header. My scripthas to go through the send log in order to find
Have you checked log files to see if it's spamassassin block the email or rblsmtpd block the IP addresses of valid clients?
My clients were having problem in sending emails due to their IP addresses have been blacklisted by certain RBL sites. Temporary solution is to edit your tcp.smtp and
WIll it be possible that Outlook gets timeout while downloading email / waiting your server to reply? Try to increase the timeout period to, say, 5 minutes and see if it works better.
Have you tried to enter the IP address, instead of mail.domain.com,in Outlook? If it works fine, then may be it's
Dear all,
Without any trouble, I've just upgraded my qmailto rel. 1.3.8. Hope it will be qt stable version soon.
Erik Jean-Paul, thank you very much.
Best regards,
Bill
On 11/9/06, Erik Espinoza [EMAIL PROTECTED] wrote:
I will add support for qmailmrtg to monitor the submission logs oncethis
You may use taps to forward all incoming/outgoing email to an account. See http://wiki.qmailtoaster.com/index.php/Tapsfor detail. Then you will need to have your own script to check the folder size and alert administrator to do the backup.
On 11/9/06, kernel.2k5 [EMAIL PROTECTED] wrote:
Hello,i
Thank you all. I always want to create a second SMTP port for users to submit email, so that they won't be blocked byISP. So far I can only achieve this by using my firewall's VIP mapping. It will be great if qmailtoaster comes with this setting by default.
Anyway, I will try Jean-Paul's method
Dear all,
Recently, some of my users, all of them are roaming users,complaint that they can't send email through our qmail server. The bounce back message is similar to this:
Subject: RE: Sent: 11/7/2006 11:44 PMThe following recipient(s) could not be reached:
'[EMAIL PROTECTED]
' on
You have to rebuild qmail. See the procedure provided by Nick Hemmesch:
Nick Hemmesch wrote:
The easy way: rpm -Uvh qmail-toaster*.src.rpm cd /usr/src/redhat/SPECS (assuming you are using CentOS 4) edit qmail-toaster.spec find 'sleep 5' (should be line 606)
change 5 to 300 (5 seconds to
not completely aware if this opens any security exploits.QuinnOn Wed, 8 Nov 2006 14:56:26 +0800, Bill Kwok wrote:
You have to rebuild qmail.See the procedure provided by Nick Hemmesch: Nick Hemmesch wrote: The easy way: rpm -Uvh qmail-toaster*.src.rpm
cd /usr/src/redhat/SPECS (assuming you are using CentOS
Dear All,
I got the same error while trying to upgrade. It seems the problem came from the parameter sequence in qtp-build-rpms. The originalprogram looks like this (~line 194):
me=`basename $0`myver=0.1.3echo $me
Is there command to turn-on / turn-off Spam Detection for all users,
instead of changing the setting user by user at qmailadmin web interface?
Thanks in advance.
I recently asked the same question after noticing this. Disable the Spam
Detection option in the admin pages for each user, this
62 matches
Mail list logo
