Larson, Timothy E. wrote:
I inherited a Q840AV (woo! my C650 was so envious when these came out) but am having problems with hard drives. I can boot from CD just fine when there are no drives connected, but as soon as I add one it doesn't boot past the gray screen. Sometimes the mouse will
To make a long story short, Low End Mac is about $6,000 in the hole due
to the collapse of ad rates in early 2001. Although ad rates have
recovered and we are pretty much breaking even today, we still have this
huge deficit that needs to be eliminated.
It wouldn't be urgent. I've been 3-4
Hello All,
I'm looking for the above to help me get through the ever growing
thesis I'm writing. Redraw rates and photos in the document are S .
L . O . W . and I'm looking to speed things up. Running a 660av (so a
7' card guys) on OS 7.6.1. I suppose the most important thing is
...Floppies still have life in them regardless of what some idiot says,
much like crt's but thats for another list.
I bought 700 MHz eMac [17 CRT] with H-P scanner and Epson C42UX color
printer package last winter for 700$ only to find out CD drive is read
ONLY. Writer would be 200$ more and
--- R. A. Cantrell [EMAIL PROTECTED] wrote:
on 8/13/03 7:16 PM, AP at [EMAIL PROTECTED]
wrote:
I have the version without the CD -- the cost was
like
$1300 back when it was bought!! (worth less than a
hundred now)
They are not even worth $1 now, let alone $100.
--
All the best,
Hi All,
I just picked up a Performer 636CD and need some info on this system. Any
original documentation, spec sheets, owner experiences with it, RAM upgrade
possibilties, and some info on OS 7.5.1. I have no experience with this
machine and want to learn it inside and out. Any help would be
My thought would be termination/SCSI ID issues. I
would recommend trying to set the hard drive to ID=0
and termination on and make sure its the last drive on
the chain.
Matt
--- Larson, Timothy E. [EMAIL PROTECTED]
wrote:
I inherited a Q840AV (woo! my C650 was so envious
when these came out)
Hello there,
Sounds like three possibilities. In order of probability : -
(1) No system software othe hard drives. Try launching from CD and
then load MacOS on one of the drives IF there is none present.
(2) The PRAM battery is Caput! Get a new one (preferably NOT by ebay,
they tend to be
At 12:12 PM -0500 on 8/11/03, Winston S. Brown wrote:
Hello,
Just got my Quadra working fine on the net so now on to tougher challenges!
Anyone know how to print over the network to a Windows XP machine?
Also, recommendations for the best browser and email program for the Quadra?
Thanks,
Winston
Adam,
What is the file size of the photos you are using. My experience with
Photoshop is that they are usually very large files. What is the lowest
resolution you can go with and still get the detail you need. Smaller files
will speed up the redraw time.
John
Powermac wrote:
- Original Message -
From: Sque [EMAIL PROTECTED]
I don't know about a photoshop plugin but the 660av takes 1mb of the 8mb
onboard for vram.
Probably better of with some kind of video card. It explains the lack
of speed for mine.
Isnt the video ram part of the
Winston,
you can connect a VGA monitor. You must purchase a Mac-PC VGA
adapter.
You can obtein a 800x600 resolution.
-Mensaje original-
De: Winston Brown [mailto:[EMAIL PROTECTED]
Enviado el: Miércoles, 13 de Agosto de 2003 14:35
Para: Quadlist
Asunto: VGA question
Powermac wrote:
- Original Message -
Hello All,
I'm looking for the above to help me get through the ever growing
thesis I'm writing. Redraw rates and photos in the document are S .
L . O . W . and I'm looking to speed things up. Running a 660av (so a
7' card guys) on OS 7.6.1.
on 8/7/03 12:44 PM, Robert P. Greene at [EMAIL PROTECTED] wrote:
Hello, everyone.
I'm attempting to resurrect an old Quadra 630, so far without success. I put
in a 4GB hard drive from a beige G3 and installed Mac OS 8.1 on it, but it
won't boot. I get the happy Mac for a moment, then the
Also another trick that's handy to see if it works, is when you hear the
Goong startup sound.. when the screen initialises but before you get the
happy mac logo, hold the C key down to specify boot from cdrom If you have
a bootable image. If you don't have the iso9660 and foreign access and a
on 8/11/03 10:12 AM, Winston S. Brown at [EMAIL PROTECTED] wrote:
Hello,
Just got my Quadra working fine on the net so now on to tougher challenges!
Anyone know how to print over the network to a Windows XP machine?
Also, recommendations for the best browser and email program for the Quadra?
- On 8/6/2003 6:58 AM, Scott Howe ([EMAIL PROTECTED]) wrote:
Hi All,
I just picked up a Performer 636CD and need some info on this system. Any
original documentation, spec sheets, owner experiences with it, RAM upgrade
possibilties, and some info on OS 7.5.1. I have no experience with this
AP wrote:
Apple Specs:
http://www.everymac.com/systems/apple/mac_performa/stats/mac_performa_636cd.html
I have the version without the CD -- the cost was like
$1300 back when it was bought!! (worth less than a
hundred now) I had to do something. But no one
cares, and _no_one_ will reply.
What
Hi Bob all;
Go to
http://www.globalvillage.com/support/teleport-platinum-commslot.html and
you will find the software you need.
Also,http://www.globalvillage.com/support/softwarelocator.html list all
the software available for the different GV modems. HTH
--Thanks; Rev. George
--Maranatha
On 8/11/03 1:12 PM, Winston S. Brown [EMAIL PROTECTED] wrote:
Hello,
Just got my Quadra working fine on the net so now on to tougher challenges!
Anyone know how to print over the network to a Windows XP machine?
Also, recommendations for the best browser and email program for the Quadra?
- Original Message -
Hello All,
I'm looking for the above to help me get through the ever growing
thesis I'm writing. Redraw rates and photos in the document are S .
L . O . W . and I'm looking to speed things up. Running a 660av (so a
7' card guys) on OS 7.6.1. I suppose the
Apple Specs:
http://www.everymac.com/systems/apple/mac_performa/stats/mac_performa_636cd.html
I have the version without the CD -- the cost was like
$1300 back when it was bought!! (worth less than a
hundred now) I had to do something. But no one
cares, and _no_one_ will reply. And I've said
Fernando,
This should work for you if you use a third party formatter or the 7.3.5 HD
setup program with the patch applied. Write back if you need the site to
download the binary.
Winston
P.S. I am running a non-Apple Quantum right now and have formatted a
Digital 1GIG disk on this Quadra as
The disk image program worked and I was able to install the program. Thanks
all !
John
I have an old pagemaker program on floppies and wish to install it on
another Mac. How can I do this since my Mac does not have a floppy drive.
While trying to install from the zip drive where I
Various lists I have read place the upper limit of RAM anywhere from 52 -
76 MB using 72 pin SIMMS. Just remember that its a 68LC040 CPU.
Steve
Steve Conrad
810 Main
Henrietta, MO 64036
816-494-5692 http://sasha91.0pi.com
Mattera Fernando Mario (IBM) wrote:
Please Sque, give me more details about this paragraph (?)
The reason for this is to completely clear the pram which may have been
corrupted by the vga converter for example. This is not very likely but
worth a look.
What can I do?
Sorry.
remove the power.
Hello, everyone.
I'm attempting to resurrect an old Quadra 630, so far without success. I put
in a 4GB hard drive from a beige G3 and installed Mac OS 8.1 on it, but it
won't boot. I get the happy Mac for a moment, then the question mark icon.
It boots fine from the Mac OS 8.1 CD. The HD mounts
No flame thrower here due to top posting - it's Outlook (Nomex gear on).
Fernando, it sounds like a dead battery (PRAM battery), but you would get
some signs of life (HD spinning, fan whirring, etc), none of which is
mentioned in your message. This will lead me to checking the power
connections:
I have an old pagemaker program on floppies and wish to install it on
another Mac. How can I do this since my Mac does not have a floppy drive.
While trying to install from the zip drive where I have copied the disks, it
keeps asking for disk 1. Any sugestions to getting around this other
Steve Conrad wrote:
Various lists I have read place the upper limit of RAM anywhere from 52 -
76 MB using 72 pin SIMMS. Just remember that its a 68LC040 CPU.
This would require a single 72mb simm plus the 4 on board.
Is there such a simm?
It does improve the hope of making a 64mb simm work. :)
Hi All,
I just picked up a Performer 636CD and need some info on this system. Any
original documentation, spec sheets, owner experiences with it, RAM upgrade
possibilties, and some info on OS 7.5.1. I have no experience with this
machine and want to learn it inside and out. Any help would be
Thanx Naftali for you answer,
Sorry for my english first. Let's continue...
The HD sounds fine, the cooler works, the battery is new (and very
expensive, by the way) and I have no idea what happen with the floppy disk.
Actaully I'm at work, but when I arrive at home, i will check power cables.
Mattera Fernando Mario (IBM) wrote:
Sorry for my english first. Let's continue...
Hehe, I'm forever apoligizing for my english. :)
The HD sounds fine, the cooler works, the battery is new (and very
expensive, by the way) and I have no idea what happen with the floppy disk.
Actaully I'm at
Please Sque, give me more details about this paragraph (?)
The reason for this is to completely clear the pram which may have been
corrupted by the vga converter for example. This is not very likely but
worth a look.
What can I do?
Thanx!
-Mensaje original-
De: Sque [mailto:[EMAIL
Okay, I will reply the best I can.
I have the version without the CD -- the cost was like
$1300 back when it was bought!! (worth less than a
hundred now)
Yes, they were very expensive new. I still say they were very good machines.
Maybe you got a lemon, I don't know.
Can't boot on system 7.5.1
Make sure all your VRAM slots are filled as this will affect the amount of
resolution you can get.
_
MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*.
http://join.msn.com/?page=features/virus
--
Quadlist is sponsored by
I have an old pagemaker program on floppies and wish to install it on
another Mac. How can I do this since my Mac does not have a floppy drive.
While trying to install from the zip drive where I have copied the disks,
it
keeps asking for disk 1. Any sugestions to getting around this other
Hi,
I have a Quadra 605 20RAM/160HD w/System 7.5
Recently I added 16MB SIMM Memory and later I put a data switch
w/OC-Mac adapter VGA monitor.
Everithing's works fine, but yesterday when I turn on the machine,
nothing happens... black screen and no sound, nothing...
Hello,
I have a 610 and want to know what my options are for a VGA monitor. If I
connect one to the Quadra, will I be able to get a larger than 640x480
screen? What do I need to buy/do?
Winston Brown
Quadra Newbie
--
Quadlist is sponsored by http://lowendmac.com/ and...
Small Dog
J Sand wrote:
I have an old pagemaker program on floppies and wish to install it on
another Mac. How can I do this since my Mac does not have a floppy
drive. While trying to install from the zip drive where I have copied
the disks, it keeps asking for disk 1. Any sugestions to getting
I would be interested. Had any offers yet?
Matt
--- R. A. Cantrell [EMAIL PROTECTED] wrote:
I have 4 matched 32 mg 72 pin 60 ns ramsticks on
hand and I no have any 72
pin machines in service. I'd like to sell them for
$30 or best offer.
--
All the best,
R.A. Cantrell
[EMAIL
Hello All,
Have bought a 9 gb 1rpm barracuda HD. My 660av refused to
recognise it. Which may not have been too bad as the heat the beast
produces could have melted lead in my little pizza box. So the
question is (besides the obvious, does anyone want a used drive?) what
is the best
Powermac wrote:
- Original Message -
From: Sque [EMAIL PROTECTED]
I don't know about a photoshop plugin but the 660av takes 1mb of the 8mb
onboard for vram.
Probably better of with some kind of video card. It explains the lack
of speed for mine.
Isnt the video ram part of the
Hello,
Just got my Quadra working fine on the net so now on to tougher challenges!
Anyone know how to print over the network to a Windows XP machine?
Also, recommendations for the best browser and email program for the Quadra?
Thanks,
Winston
--
Quadlist is sponsored by http://lowendmac.com/
Floppies still have life in them regardless of what some idiot says,
much like crt's but thats for another list. ;)
This is true. I have roughly 2000 floppies (this is just 3.5 floppies) and
very few have failed me. In fact, I check my Macs via floppies from CMS
Enhancements, Inc, (only one of
I inherited a Q840AV (woo! my C650 was so envious when these came out) but am having
problems with hard drives. I can boot from CD just fine when there are no drives
connected, but as soon as I add one it doesn't boot past the gray screen. Sometimes
the mouse will move, but more likely it is
Hello Listers,
Is is possible to swap the above motherboards? I will
slide in the LC580 board to my dead 575 board, change
the HD to IDE, but how can I change cable is the
problem, has anybody on the list been to this
situation? IM a novice, need ur help. Thanks.
Henri
Henry Lintiaco wrote:
Hello Listers,
Is is possible to swap the above motherboards? I will
slide in the LC580 board to my dead 575 board, change
the HD to IDE, but how can I change cable is the
problem, has anybody on the list been to this
situation? IM a novice, need ur help. Thanks.
They
Henry Lintiaco wrote:
Hello Listers,
Is is possible to swap the above motherboards? I will
slide in the LC580 board to my dead 575 board, change
the HD to IDE, but how can I change cable is the
problem, has anybody on the list been to this
situation? IM a novice, need ur help.
49 matches
Mail list logo
