Any standard shoulder bolt the right size will do for balljoint also. As other
have said a higher tensile can be a nice touch too.
From: quantumowners@googlegroups.com on behalf
of Jim Hearne
Sent: 11 September 2023 17:15
To: quantumowners@googlegroups.com
Just standard shouldered bolts through arm to body. Camber bolts if you like in
the shock to hub mounts.
You may find washers are needed in the cavity the arm sits to get it nice and
tightly seated before tightening.
Mick
From: quantumowners@googlegroups.com
The 2 bolts that hold the shock to the hub carrier are the only 2 special bolts
that i know of.
Jim
From: list...@liberator-systems.co.uk
Sent: Monday, September 11, 2023 4:11 PM
To: Quantum Owners Group
Subject: Re: [Quantum Owners] Pinch Bolt - Front track control arm - Saloon Mk2
Thanks
Thanks Jim.
For some reason I had in back of my mind that they were special ground
tapered bolts ;-)
John
On Monday, 11 September 2023 at 14:12:36 UTC+1 Jim Hearne wrote:
> The Ford part is Finis code 6152276
> It's a 8mm x 40mm Torx head
>
> But you can use a normal HT bolt in there with a
The Ford part is Finis code 6152276
It's a 8mm x 40mm Torx head
But you can use a normal HT bolt in there with a hex or allen head , one
marked 10.9 or 12.9 would be best, they are stronger than the default 8.8
spec.
Black allen headed bolts tend to be 10.9 as a minimum.
Ideally find a bolt
What are the correct pinch bolts for the front track control arm ball joint?
Mk2 saloon - Fiesta Mk2 XR2 base, Escort Mk4 control arms & anti roll bar.
Thanks
John
--
--
You received this message because you are subscribed to the Google Groups
"Quantum Owners Group" group.
To post to this
