Re: [Quantum Owners] Pinch Bolt - Front track control arm - Saloon Mk2
Any standard shoulder bolt the right size will do for balljoint also. As other have said a higher tensile can be a nice touch too. From: quantumowners@googlegroups.com on behalf of Jim Hearne Sent: 11 September 2023 17:15 To: quantumowners@googlegroups.com Subject: Re: [Quantum Owners] Pinch Bolt - Front track control arm - Saloon Mk2 The 2 bolts that hold the shock to the hub carrier are the only 2 special bolts that i know of. Jim From: list...@liberator-systems.co.uk Sent: Monday, September 11, 2023 4:11 PM To: Quantum Owners Group Subject: Re: [Quantum Owners] Pinch Bolt - Front track control arm - Saloon Mk2 Thanks Jim. For some reason I had in back of my mind that they were special ground tapered bolts ;-) John On Monday, 11 September 2023 at 14:12:36 UTC+1 Jim Hearne wrote: The Ford part is Finis code 6152276 It's a 8mm x 40mm Torx head But you can use a normal HT bolt in there with a hex or allen head , one marked 10.9 or 12.9 would be best, they are stronger than the default 8.8 spec. Black allen headed bolts tend to be 10.9 as a minimum. Ideally find a bolt that has a long enough unthread section to pass through one side of the hub and the slot in the balljoint, but obviously not to much unthreaded so the nut bottoms out. Jim From: list...@liberator-systems.co.uk Sent: Monday, September 11, 2023 1:31 PM To: Quantum Owners Group Subject: [Quantum Owners] Pinch Bolt - Front track control arm - Saloon Mk2 What are the correct pinch bolts for the front track control arm ball joint? Mk2 saloon - Fiesta Mk2 XR2 base, Escort Mk4 control arms & anti roll bar. Thanks John -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantu...@googlegroups.com To unsubscribe from this group, send email to quantumowner...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowner...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/e0732f27-6b8a-421b-ac91-a34e83629ba0n%40googlegroups.com. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/eac497aa-a765-4cbf-93a2-a3bd0892375cn%40googlegroups.com<https://groups.google.com/d/msgid/quantumowners/eac497aa-a765-4cbf-93a2-a3bd0892375cn%40googlegroups.com?utm_medium=email_source=footer>. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with re
Re: [Quantum Owners] Pinch Bolt - Front track control arm - Saloon Mk2
Just standard shouldered bolts through arm to body. Camber bolts if you like in the shock to hub mounts. You may find washers are needed in the cavity the arm sits to get it nice and tightly seated before tightening. Mick From: quantumowners@googlegroups.com on behalf of list...@liberator-systems.co.uk Sent: 11 September 2023 15:11 To: Quantum Owners Group Subject: Re: [Quantum Owners] Pinch Bolt - Front track control arm - Saloon Mk2 Thanks Jim. For some reason I had in back of my mind that they were special ground tapered bolts ;-) John On Monday, 11 September 2023 at 14:12:36 UTC+1 Jim Hearne wrote: The Ford part is Finis code 6152276 It's a 8mm x 40mm Torx head But you can use a normal HT bolt in there with a hex or allen head , one marked 10.9 or 12.9 would be best, they are stronger than the default 8.8 spec. Black allen headed bolts tend to be 10.9 as a minimum. Ideally find a bolt that has a long enough unthread section to pass through one side of the hub and the slot in the balljoint, but obviously not to much unthreaded so the nut bottoms out. Jim From: list...@liberator-systems.co.uk Sent: Monday, September 11, 2023 1:31 PM To: Quantum Owners Group Subject: [Quantum Owners] Pinch Bolt - Front track control arm - Saloon Mk2 What are the correct pinch bolts for the front track control arm ball joint? Mk2 saloon - Fiesta Mk2 XR2 base, Escort Mk4 control arms & anti roll bar. Thanks John -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantu...@googlegroups.com To unsubscribe from this group, send email to quantumowner...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowner...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/e0732f27-6b8a-421b-ac91-a34e83629ba0n%40googlegroups.com. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com<mailto:quantumowners+unsubscr...@googlegroups.com>. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/eac497aa-a765-4cbf-93a2-a3bd0892375cn%40googlegroups.com<https://groups.google.com/d/msgid/quantumowners/eac497aa-a765-4cbf-93a2-a3bd0892375cn%40googlegroups.com?utm_medium=email_source=footer>. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contain
Re: [Quantum Owners] Pinch Bolt - Front track control arm - Saloon Mk2
The 2 bolts that hold the shock to the hub carrier are the only 2 special bolts that i know of. Jim From: list...@liberator-systems.co.uk Sent: Monday, September 11, 2023 4:11 PM To: Quantum Owners Group Subject: Re: [Quantum Owners] Pinch Bolt - Front track control arm - Saloon Mk2 Thanks Jim. For some reason I had in back of my mind that they were special ground tapered bolts ;-) John On Monday, 11 September 2023 at 14:12:36 UTC+1 Jim Hearne wrote: The Ford part is Finis code 6152276 It's a 8mm x 40mm Torx head But you can use a normal HT bolt in there with a hex or allen head , one marked 10.9 or 12.9 would be best, they are stronger than the default 8.8 spec. Black allen headed bolts tend to be 10.9 as a minimum. Ideally find a bolt that has a long enough unthread section to pass through one side of the hub and the slot in the balljoint, but obviously not to much unthreaded so the nut bottoms out. Jim From: list...@liberator-systems.co.uk Sent: Monday, September 11, 2023 1:31 PM To: Quantum Owners Group Subject: [Quantum Owners] Pinch Bolt - Front track control arm - Saloon Mk2 What are the correct pinch bolts for the front track control arm ball joint? Mk2 saloon - Fiesta Mk2 XR2 base, Escort Mk4 control arms & anti roll bar. Thanks John -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantu...@googlegroups.com To unsubscribe from this group, send email to quantumowner...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowner...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/e0732f27-6b8a-421b-ac91-a34e83629ba0n%40googlegroups.com. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/eac497aa-a765-4cbf-93a2-a3bd0892375cn%40googlegroups.com. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsub
Re: [Quantum Owners] Pinch Bolt - Front track control arm - Saloon Mk2
Thanks Jim. For some reason I had in back of my mind that they were special ground tapered bolts ;-) John On Monday, 11 September 2023 at 14:12:36 UTC+1 Jim Hearne wrote: > The Ford part is Finis code 6152276 > It's a 8mm x 40mm Torx head > > But you can use a normal HT bolt in there with a hex or allen head , one > marked 10.9 or 12.9 would be best, they are stronger than the default 8.8 > spec. > Black allen headed bolts tend to be 10.9 as a minimum. > Ideally find a bolt that has a long enough unthread section to pass > through > one side of the hub and the slot in the balljoint, but obviously not to > much > unthreaded so the nut bottoms out. > > Jim > > > > From: list...@liberator-systems.co.uk > Sent: Monday, September 11, 2023 1:31 PM > To: Quantum Owners Group > Subject: [Quantum Owners] Pinch Bolt - Front track control arm - Saloon Mk2 > > What are the correct pinch bolts for the front track control arm ball > joint? > Mk2 saloon - Fiesta Mk2 XR2 base, Escort Mk4 control arms & anti roll bar. > Thanks > John > > -- > -- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To post to this group, send email to quantu...@googlegroups.com > To unsubscribe from this group, send email to > quantumowner...@googlegroups.com > For more options, visit this group at > http://groups.google.com/group/quantumowners?hl=en > > IMPORTANT NOTE: All information presented herewith is provided on an "As > Is" > basis, without warranty or the implication thereof. Neither the Quantum > Owners Club nor the individuals associated with the Quantum Owners Club or > in the preparation of the above information shall have any liability to > any > person or entity with respect to liability, loss, or damage caused or > alleged to be caused directly or indirectly by the instructions contained > within this or related message(s). > --- > You received this message because you are subscribed to the Google Groups > "Quantum Owners Group" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to quantumowner...@googlegroups.com. > To view this discussion on the web visit > > https://groups.google.com/d/msgid/quantumowners/e0732f27-6b8a-421b-ac91-a34e83629ba0n%40googlegroups.com. > > > > -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/eac497aa-a765-4cbf-93a2-a3bd0892375cn%40googlegroups.com.
Re: [Quantum Owners] Pinch Bolt - Front track control arm - Saloon Mk2
The Ford part is Finis code 6152276 It's a 8mm x 40mm Torx head But you can use a normal HT bolt in there with a hex or allen head , one marked 10.9 or 12.9 would be best, they are stronger than the default 8.8 spec. Black allen headed bolts tend to be 10.9 as a minimum. Ideally find a bolt that has a long enough unthread section to pass through one side of the hub and the slot in the balljoint, but obviously not to much unthreaded so the nut bottoms out. Jim From: list...@liberator-systems.co.uk Sent: Monday, September 11, 2023 1:31 PM To: Quantum Owners Group Subject: [Quantum Owners] Pinch Bolt - Front track control arm - Saloon Mk2 What are the correct pinch bolts for the front track control arm ball joint? Mk2 saloon - Fiesta Mk2 XR2 base, Escort Mk4 control arms & anti roll bar. Thanks John -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/e0732f27-6b8a-421b-ac91-a34e83629ba0n%40googlegroups.com. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/FF60D929E4C54BD78A5FC0F20F3C5409%40JimQuad.
[Quantum Owners] Pinch Bolt - Front track control arm - Saloon Mk2
What are the correct pinch bolts for the front track control arm ball joint? Mk2 saloon - Fiesta Mk2 XR2 base, Escort Mk4 control arms & anti roll bar. Thanks John -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/e0732f27-6b8a-421b-ac91-a34e83629ba0n%40googlegroups.com.
