[qubes-users] IT IS Not possible to encrypt boot Filesystem in Installation process

[Joo Nasss]

If I try to select encrypted Filesystem IT Changes to unencrypted FS.


I want to Install IT with grub encryption

( https://www.pavelkogan.com/2014/05/23/luks-full-disk-encryption/ )

With grub in a write protected SD

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAAM541mFz6uc0-00oXTMvvJU5mGyWve8ZZR%3DbeP-2UwYv3Cy_Q%40mail.gmail.com.

Re: [EXT] Re: [qubes-users] Qubes won't boot

[Ulrich Windl]

On 6/1/20 1:59 AM, Boot problems wrote:

Using fdisk -l /dev/xvdi shows me 2 partitions only, a 200m EFI System and 
xvdi2 a 931G Linux file system, there are no more partitions even if I decrypt, 
mount and fdisk -l /dev/xvdi2


luksopen won't add another partition; it will create /dev/mapper/
Maybe it's easier to check the out put of these commands (after having 
opened all the encrypted partitions):

pvs
vgs
lvs
(I don't think a pvscan is necessary after opening encrypted devices)





--
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/97f5b0b9-d70b-a376-997a-4af58c7f80ee%40rz.uni-regensburg.de.

Re: [EXT] Re: [qubes-users] Qubes won't boot

[Ulrich Windl]

On 5/31/20 10:02 PM, dhorf-hfref.4a288...@hashmail.org wrote:

On Sun, May 31, 2020 at 12:45:22PM -0700, Boot problems wrote:

Hello, I wanted to migrate from my old hhd to a new ssd, I installed

[...]

could it be a grub issue? What can I do?


assuming you were NOT reinstalling because you were compromised...

- just boot your new qubes system
- with the old HDD attached (directly or through USB)
- check if there are partitions on it (fdisk -l /dev/hdx)
- open the luks container from the HDD (google: cryptopen)
- you should now have access to the lvm volume of your old system
- with that access, you can create replacement vms and dd over their
   private volumes.


At least in the past there were issues when different devices had the 
same volume group name, especially when the devices were cloned.

Maybe you need "pvchange -u ..." and "vgchange -u ...".
To protext yourself, you should (at least temporarily) rename one of the 
two identical VGs (which can be a challenge by itself).




see how far you can get on that list.
ask more specific questions as required.





--
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/acba8324-d742-7812-ac4c-daa503e0bec9%40rz.uni-regensburg.de.

Re: [EXT] Re: [qubes-users] X Startup Failed, Aborting Installation. Pane is Dead.

[Ulrich Windl]

On 5/30/20 2:49 AM, dennisjmen...@gmail.com wrote:

Update! Solved the issue. For future searchers:

All that had to be done for me was:

•Launch in Legacy boot
•On the blue install screen, highlight Install and press Tab
•move the text cursor with your left arrow key and after “alpha_support=1” add 
“modprobe.blacklist=nouveau” (without the quotes)
•press enter and you should be brought to the install screen!


Congrats! So ignore my previous message...



Good luck to anyone having a similar problem!



--
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/ebf5f1dc-5a3d-2b2f-0c1a-9a218c8a59ff%40rz.uni-regensburg.de.

Re: [EXT] Re: [qubes-users] X Startup Failed, Aborting Installation. Pane is Dead.

[Ulrich Windl]

On 5/30/20 1:10 AM, dennisjmen...@gmail.com wrote:

I verified with the PGP key. Redownloded. Wrote the dd in Fedora. Still not 
working. I’m stumped. I don’t get it. I’m super bummed.


Could it be that there _is_ graphics output, but your screen cannot 
handle it (and thus stays black)?


You could try to use a different computer to install Qubes OS on a 
removable media, and then try if your X setup works in the real OS.


Alternatively did you try to "switch back" to a text terminal using 
Crtl+Alt+F1 through F12 (don't know which are alive, so try a few)?


And if you have a prompt on such a terminal, you could try inspecting 
logs (specifically the X server's log)...


--
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/7c04c7aa-5cf3-9194-e6c2-3ffd3254144d%40rz.uni-regensburg.de.

Re: [EXT] Re: [qubes-users] Another newbie question related to TemplateVMs

[Ulrich Windl]

On 5/30/20 12:48 AM, 'Jackie' via qubes-users wrote:

Frédéric Pierret:


On 2020-05-29 18:26, viktor.ransm...@gmail.com wrote:

Hello Frederic,

Am Freitag, 29. Mai 2020 14:01:46 UTC+2 schrieb Frédéric Pierret:

 On 2020-05-29 13:53, viktor@gmail.com  wrote:
 >
 > I'm trying to continue my journey into the various Qubes OS 
options from the smaller - and not - from the larger template POV.

 >
 > I'm not asking for any additions to the provided packages 
available for example in 'fedora-31-minimal'.

 >
 > All I'm asking for is help to resolve the following question:
 >
 > *What do I need to do in order to activate / enable the copy / 
paste pattern via copy-c/v for xterm?

 > *

 Control+Middle mouse clic -> Select to Clipboard. Then, you can 
you QubesOS clipboard shortcut (Control+Shift+C).



It may be obvious to you, but for me - coming from the Windows world 
- it is not really clear ...


The middle click simply the wheel click but indeed, with only left and 
right buttons it's both at the same time. Here when hold Control in 
addition to left and right mouse button (keep holding) on xterm, it 
makes appearing a little menu where the selection is made by unholding 
mouse buttons. On this little menu you would see the 'Select to 
Clipboard' option.


For what it's worth i can't get this to work on xterm either. I use 
gnome-terminal which lets you right click -> copy (or edit -> copy), 
then qubes copy/paste shortcuts work like normal.


I had pointed out that problem some time ago. It seems there are two 
different kinds of clipboard (later Emacsen do treat them differently), 
but QubesOS seems to support only one of them. So while you can mark 
text with the mouse locally and paste it, you cannot copy that 
"selection" to another VM...






--
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/1ea93e34-f2d5-edeb-7c68-671ba46eb43a%40rz.uni-regensburg.de.

Re: [EXT] Re: [qubes-users] Another newbie question related to TemplateVMs

[Ulrich Windl]

On 5/29/20 7:00 PM, Frédéric Pierret wrote:

...


 Control+Middle mouse clic -> Select to Clipboard. Then, you can you 
QubesOS clipboard shortcut (Control+Shift+C).


It may be obvious to you, but for me - coming from the Windows world - it is 
not really clear ...


The middle click simply the wheel click but indeed, with only left and right 
buttons it's both at the same time. Here when hold Control in addition to left 
and right mouse button (keep holding) on xterm, it makes appearing a little 
menu where the selection is made by unholding mouse buttons. On this little 
menu you would see the 'Select to Clipboard' option.
  

I searched for 'middle mouse clic' & I was told that on a regular two button mouse, 
this maps / translates to pressing both left & right mouse at the same time.


I don't want to make any advertising, but maybe it's time to get a 
three-button mouse. Some time ago I saw some mouse in a shop, held it in 
my hand, and immediately felt I must have that mouse! I don't know it 
still is available, but the model is "Speedlink Descano Ergonomic 
Vertical Mouse - USB" (SL-6168RRBK). Actually it's a 5-button mouse with 
scroll wheel and a button to switch between different resolutions (in 
case you have little space for movement the high resolution is very nice).


BTW: Just checking it, I found that it's much cheaper now (I paid more 
than two times that price): 
https://geizhals.de/speedlink-descano-ergonomic-vertical-mouse-schwarz-sl-6168-rrbk-a1162507.html 
(German, for 18€)


Ulrich

[...]

--
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/957bfc14-ad94-b0ef-a347-08a5da4c9187%40rz.uni-regensburg.de.

Re: [EXT] Re: [qubes-users] Multiple X sessions in Dom0?

[Ulrich Windl]

On 5/29/20 12:23 PM, Frédéric Pierret wrote:



On 2020-05-29 02:34, brendan.h...@gmail.com wrote:

Can Qubes support multiple X sessions in dom0?


I guess you want to see VMs in separate X sessions. Without speaking of user 
management, yes it can but currently gui-daemon is running on DISPLAY=:0 
waiting for all VM start/shutdown and starting a proper server for them. In 
your case of having multiple DISPLAY, that would mean to adapt the automatic 
start of each deamon per VM.


Actually I think that the virtual desktops (four by default) can 
substitute for having multiple X servers running on private screens.

(Did you ever try Ctrl+Alt+CursorLeft/CursorRight?)
However what I'm missing is the feature to make some VMs (or maybe Apps) 
start on a specific virtual desktop.
A possible problem with the window manager is that application popups 
(like asking for a password) do pop up on the current virtual desktop 
even if the app opening it runs on a different virtual desktop. That can 
be quite confusing!




I would say, wait or try the (undocumented) GuiVM implementation in R4.1, that 
would ease such use-case/management..
  

e.g. default session on primary terminal (via ctrl-alt-f1), then start another 
session on the third pty (ctrl-alt-f3) after logging in as the primary qubes 
user in dom0?

B



Best,
Frédéric



--
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/8533c113-24b8-2763-6db7-a6bcb178beb7%40rz.uni-regensburg.de.

Re: [EXT] Re: [qubes-users] SplitGPG with Subkeys Encryption Error

[Ulrich Windl]

On 5/27/20 9:21 PM, Robert Spigler wrote:
qubes-gpg-client-wrapper -r robertspig...@protonmail.ch --trusted-key 
 -e 
'/home/user/Documents/Test_Encryption.txt' -o /home/user/Documents/Final.gpg


Still results in:

bash: C2C60E279E86F10D5697782535CE0FE6C2141823: No such file or directory



I wonder: Did you try to read "HOW TO SPECIFY A USER ID" in "man gpg"?
Or maybe see the examples: Try with the simplistic format like this:
EXAMPLES
   gpg -se -r Bob file
  sign and encrypt for user Bob

Once the simple variant works, try a more complicated one...

What is the wrapper? This also does not open the qubes-gpg-client 
interface, in case that info helps.  I should also clarify that I am 
trying to encrypt the contents of the file, so that I could copy and 
paste the message for messaging, forums, etc; not encrypt the entire 
file for sending.


--
You received this message because you are subscribed to the Google 
Groups "qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send 
an email to qubes-users+unsubscr...@googlegroups.com 
.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/813ab042-f959-497c-8915-9c262c97ef84%40googlegroups.com 
.


--
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/4cc86968-c69c-308b-e665-60d900a24d6f%40rz.uni-regensburg.de.

Re: [EXT] [qubes-users] Problems with keyboard

[Ulrich Windl]

On 5/25/20 8:54 PM, drbgw...@gmail.com wrote:

Hi everyone,


I've got a wireless logitech mouse and keyboard that I'm using. I have 


JFYI: After some security issues with wireless Logitech devices became 
public some time ago, our security department did forbid the use of any 
such devices (maybe just to keep passwords private). Recently I read 
about more attacks on Bluetooth, so I feel quite happy with my 
26-year-old Cherry keyboard (G80-1000). It even needs a PS/2 adapter for 
the even older "DIN-type of plug" on the keyboard...

Unfortunately quality-keyboards are not built any more...

qubes on my laptop and am putting it on my desktop and plugging a few 
things into it like another monitor and the mouse/keyboard (which are a 
set). Thing is that the mouse works fine, and it is seen in the dropdown 
as 'logitech usb receiver'. The keyboard though is not working. The 
mouse works in all vms without having to tweak anything and I have had 
both the mouse and keyboard working in another install of qubes, but for 
some reason I can't get the keyboard to work with the mouse this time 
round. I have even tried another wireless keyboard/mouse combo with the 
same result.



I have been into settings and tried different keyboards etc to no effect.


I have posted this in the reddit group with no one able to help so far, 
so if anyone can help I'd appreciate it.  Currently I am using a 
keyboard with a cable that I have to change with each vm which is a deal 
breaker for me I'm afraid.  So if someone can tell me where to look or 
whatever I'd appreciate it.


--
You received this message because you are subscribed to the Google 
Groups "qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send 
an email to qubes-users+unsubscr...@googlegroups.com 
.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/27004989-85d4-45e5-bfce-bbd84f59e29f%40googlegroups.com 
.


--
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/76f67dae-4641-4998-14f9-bda743e0c168%40rz.uni-regensburg.de.

Re: [EXT] Re: [qubes-users] which OCR software, address database and e-mail program run with the Qubes-OS operating system - welche OCR Software, Adressdatenbank sowie E-Mail- Programm mit dem Betrieb

[Ulrich Windl]

On 5/25/20 9:25 AM, haaber wrote:

Hi,

I don't know what to do now because I want to switch to the Qubes OS
operating system soon, that's why I'm asking you!

Because I suspect that you can no longer use them with Qubes OS.
That's why I'm interested in whether there is such software in Qubes OS.


I second the other answers, especially Sven Semmler's. If you have only
"consumer experience" with  windows, the change can be quite rough, so
if you have only ONE working machine, then  *do not even think of*
installing qubes on that. Use a second machine, get used to it, first.


Or, if required space is not a big problem, get an external disk or SSD 
to install and boot Qubes OS to/from.
(This message is written using Thunderbird inside Debian-10 AppVM in 
QubesOS booted from an external disk)




Before wiping windows, make backups: often user data is spread in
windows machines, over folders & partitions and it is hard to find all
of it. So do a *full* backup. Otherwise, I suggest you write on a piece
of paper "I acknowledge that all my data may be lost", so you can't tell
yourself afterwards you did not know.


I'm still using Windows, too...



If you are worried about OCR, have a look at "tesseract". It is free &
one of the best anyways. Consider a donation, if you are happy with it,
instead of buying the first one you see.


Bernhard



--
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/9ca95bb4-b41d-6df0-7549-33ef4ccfdca7%40rz.uni-regensburg.de.

Re: [EXT] [qubes-users] Next update of Qubes?

[Ulrich Windl]

On 5/23/20 5:32 PM, Catacombs wrote:
I see that Qubes does not announce planned new releases of Qubes, or 
state what should trigger an update.


I am between updating Qubes with Fedora 32, which also means creating 
AppVMs, I am not sure how I would update the Work VM, as it is, I am 
guessing, based on Fedora 32.  All this translates to my working with 
Salt, which is shown a lot of in this forum.  Meaning I should learn 
Salt and some other things.


Just seems like it would be so much easier if we had an entire new 
version of Qubes, which I could install.  At the same time, I am making 


+1 At least some kind of installable "service pack" would be nice. Maybe 
such "service pack" could be as simple as some reliable(!) script that 
performs the upgrades required.


sure any Malware I might have picked up gets clobbered.   And leaving me 
with the problem of re installing all of my personal files, my own 
personal fixes to Template VMs.  Instead many are learning Salt.


This question also comes back to making Qubes easy for Human Rights 
Activists and Journalists.   I do not think those two groups will go to 
the trouble of learning how to install Salt.  I agree that since most of 


+1 Even IT professionals that only use Qubes OS occasionally might not 
want to "dig in" that deeply...


the changes for Human Rights Activists/Journalists are made inside 
Template VMs of (now usually Debian, or Fedora), that the folks who 
create Qubes for us, should not concern themselves with those things.


Specifically I see the danger to do things wrong that might affect both 
privacy and security.




So, anyone here have a guess as to what new version of Qubes might be 
nearly out?  Or should I start reading about how to work with Salt?


That failure of not having an updated version ready in time is a bit 
like "We didn't expect Christmas to be that early this year". ;-)





--
You received this message because you are subscribed to the Google 
Groups "qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send 
an email to qubes-users+unsubscr...@googlegroups.com 
.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/4b95eb01-d12e-46ae-8bd4-0996f2b49a62%40googlegroups.com 
.


--
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/9c76aa2f-84c1-ef18-0262-92f36baecfc2%40rz.uni-regensburg.de.

Re: [EXT] [qubes-users] Microphone Not Recording in Qubes R4 on Purism Librem v4

[Ulrich Windl]

On 5/22/20 7:30 PM, 'Yiyi50' via qubes-users wrote:
I'm a novice Linux user, so please bare with me. A few days ago, I was 
trying to chat online and noticed that my microphone isn't picking up 
anything. I tested the microphone on a few sites and still nothing. Are 
there any command line tools i can use to fix it? I receive audio 
output, so i don't think it's the sound card. But could it be a 
defective chip or am I not doing something right? Dom0 picks up the Mic 
and I can attach it using the UI tool. But no one can hear me.


You could use audacity to try recording from your mic to verify that the 
mic , driver and mixer settings are OK. Maybe the mic is just muted...





Sent with ProtonMail  Secure Email.

--
You received this message because you are subscribed to the Google 
Groups "qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send 
an email to qubes-users+unsubscr...@googlegroups.com 
.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/S9c7Sfov9XpBq0X16Y_msv_ItrQvYu_NgQHi9W0afLE1lb_92BeKF-WFbY7NBamOVuWjCgLbXtYzlCuPsw_AFfgFURfNEqdHH3Z9qt1xHNM%3D%40protonmail.com 
.


--
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/4f02d456-da1f-4996-04c3-77371a8cec77%40rz.uni-regensburg.de.

Re: [EXT] [qubes-users] Libreoffice window sized tiny every time

[Ulrich Windl]

On 5/22/20 12:05 PM, qtpie wrote:

Hi,

I have a very weird issue with LibreOffice writer, calc and possibly 
other Libreoffices on Fedora templates (at least Fedora 31 and 30). It 
doesnt occur on Debian 10.


When I open an existing document the window that is opened gets a tiny 
size and is place in the top left of the display. The exact size varies, 
but often it is sized down to contain only the Libreoffice internal [X] 
in the top right. What doesn't vary is that its anoying, because I have 
to use the mouse over there every time to size up the window. The 
journal doesnt contain much useful:


May 22 11:46:03 browsing-untrusted systemd[679]: 
dbus-:1.2-org.freedesktop.Notifications@3.service: Succeeded.
May 22 11:46:24 browsing-untrusted xdg-desktop-por[4993]: Failed to get 
application states: GDBus.Error:org.freedesktop.portal.Error.Failed: 
Could not get window list: Cannot invoke method; proxy is for the 
well-known name org.gnome.Shel>

~


Anyone else having this issue or know a solution?



I wonder: did you try resetting the user preferences (if any)?

--
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/c6e52b09-be47-be99-61b7-204884e4f610%40rz.uni-regensburg.de.

Re: [qubes-users] Where to connect monitor

[dhorf-hfref . 4a288f10]

On Fri, Jun 05, 2020 at 08:05:50AM -0700, romandash...@gmail.com wrote:
> I can passthrough GPU to *one* of the VMs for computational purposes. But 
> for display purposes, I still must connect my monitor to the motherboard 
> display port only. Correct?

the question of where the physical port is is unrelated to this.
if you pass a GPU to a vm, the vm can use it in whatever way it wants.


-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/20200605183132.GK1079%40priv-mua.

Re: [qubes-users] Question for google groups

[Sven Semmler]

On Fri, Jun 05, 2020 at 04:28:59AM -, lymepopsicle via qubes-users wrote:
> Can someone help me with the commands for installing Signal in the debian
> 10 template vm? It seems like the official documentation from the Qubes
> website is outdated, so ideally if someone could update the documentation
> for debian 10 rather than the current deprecated debian 9 documentation,
> that would benefit more users beyond myself.

I just did it the other day. The one piece of information that's missing in the 
documentation is that for curl to work the template needs to have a netvm. 
Normally you want your templates to be offline and only use the UpdateProxy to 
install software. Here step-by-step:


dom0# qvm-prefs debian-10 netvm sys-firewall

debian-10# curl -s https://updates.signal.org/desktop/apt/keys.asc | sudo 
apt-key add -

dom0# qvm-prefs debian-10 netvm ''

debian-10# echo "deb [arch=amd64] https://updates.signal.org/desktop/apt xenial 
main" | sudo tee -a /etc/apt/sources.list.d/signal-xenial.list

debian-10# sudo apt update && sudo apt install signal-desktop

That's it!

If you decide that giving your template a netvm for a moment is a risk you 
don't want to take, then you have to download 
https://updates.signal.org/desktop/apt/keys.asc in a browser VM and copy it 
over to the template. You can then simply run:

debian-10# echo keys.asc | sudo apt-key add - 

I'll submit a PR later today to update the website.

/Sven

-- 
 public key: https://www.svensemmler.org/0x8F541FB6.asc
fingerprint: D7CA F2DB 658D 89BC 08D6 A7AA DA6E 167B 8F54 1FB6

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/20200605170954.GA1097%40app-email-private.


signature.asc
Description: PGP signature

[qubes-users] Where to connect monitor

[romandashkov]

Hi all,
Noob here. If I understand correctly, VMs in Qubes cannot output using the 
display port on my GPU, but only using the display port on my motherboard. 
This is because Xen does not support GPU virtualization/emulation. At most 
I can passthrough GPU to *one* of the VMs for computational purposes. But 
for display purposes, I still must connect my monitor to the motherboard 
display port only. Correct?

Regards.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/e380430b-4613-4f8b-8c0c-2c828c6f4bbeo%40googlegroups.com.