[qubes-users] How to Upgrade an Application in VM
Qubes R4.0.2 rc3 I would like to get the latest Sagemath and Jupyter on a VM. I am using the Fedora 30 tempateVM which I updated from 29. I then cloned the Fedora 30, and added sagemath with: dnf install sagemath Is there a term for this type of installation? The next version of sagemath is to have full Python 3 capabilities. I am concerned on how to install the latest because when I made the initial sagemath the newest version was 8.9 but the install was 8.8. When the next version comes out, I would like to assure I get the latest. How do I get the latest? What concerns/risks should I consider for this installation? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/0492eef6-b623-4735-9e51-58271161683e%40googlegroups.com.
[qubes-users] Installation Failure of Sagemath - More space needed on the filesystem
I am trying to install Sagemath using: sudo dnf install sagemath which failed. Template: fedora-30 This vm was started with default private/system storage 7 GB/10 GB. Initial memory 400 MB Max memory 4000 MB VCPUs no.: 2 Mode: PVH The installation transaction summary reports: Install 893 packages Total download size: 1.1 G Installed size: 4.1 G I answer yes to install. The system progresses through a portion of the installation and ends with: Error Summary Disk Requirements: At least 1506GB more space needed for the / filesystem The second to the last report line is the installation of sagetwx which needs 1504MB. Then the last entry is sagemath which needs 1506MB. The last entry memory requirement matches the error report for 1506MB. More may be required. Qube Manager showed Disk usage for the VM to be zero. I closed the manager and reopened. It then showed 216.78 MiB. [Is there a way to make this update in realtime?] The system storage is (10 GB) is grayed out. I don't see how to change it but I don't expect that to be a solution. I stopped the VM, increased the private storage to 9.2 GB, restarted the VM, repeated the installation command, and received a similar error. Error Summary Disk Requirements: At least 1480GB more space needed for the / filesystem The second to the last report line is the installation of sagetwx which needs 1477MB. Then the last entry is sagemath which needs 1480MB. The last entry memory requirement matches the error report for 1480MB. It is curious the space requirements were not the same between the two runs, the failure occurred at the same point even though the memory was increased by about 2 GB. I closed the manager and reopened. It again showed 216.78 MiB. Can I expect that the installation report on storage sizes is accurate? The system storage is (10 GB) is grayed out. I don't see how to change it but I don't expect that to be a solution. How might I progress? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/43aca8b5-427c-43a3-b4b0-0a57b4a11381%40googlegroups.com.
Re: [qubes-users] Re: New Install is Missing sys-USB, How to recover - Update
On Saturday, December 14, 2019 at 12:29:03 PM UTC-6, awokd wrote: > > r...@aarden.me : > > > It has taken four years to get to here. I have tried this with Debian > and > > Qube OS. I could not get Xen on Debian to work due to my wireless only > > networking of my laptop. With Qubes, it has been getting wireless and > USB > > to both work. This time, wireless worked maybe. > > > > There is a sys-USB qube. This will be my next challenge. I want to be > > able to use a mouse and, as this is a laptop, and I would like to > connect > > to my USB3 docking station and test out the functionality. > > Mouse shouldn't be too hard, but some USB controllers don't like running > inside a qube. To see the log, you need to be in su mode in a dom0 > session, so "sudo nano /var/log/libvirt/libxl/libxl-driver.log" should > work. Check it shortly after attempting to start sys-usb if it is > failing to start. > > -- > - don't top post > Mailing list etiquette: > - trim quoted reply to only relevant portions > - when possible, copy and paste text instead of screenshots > On Saturday, December 14, 2019 at 12:29:03 PM UTC-6, awokd wrote: > > r...@aarden.me : > > > It has taken four years to get to here. I have tried this with Debian > and > > Qube OS. I could not get Xen on Debian to work due to my wireless only > > networking of my laptop. With Qubes, it has been getting wireless and > USB > > to both work. This time, wireless worked maybe. > > > > There is a sys-USB qube. This will be my next challenge. I want to be > > able to use a mouse and, as this is a laptop, and I would like to > connect > > to my USB3 docking station and test out the functionality. > > Mouse shouldn't be too hard, but some USB controllers don't like running > inside a qube. To see the log, you need to be in su mode in a dom0 > session, so "sudo nano /var/log/libvirt/libxl/libxl-driver.log" should > work. Check it shortly after attempting to start sys-usb if it is > failing to start. > > Thank you for the info. The sys-usb showed up in the qube manager. Clicking start on the start/resart context menu initiated start up. An error window popped up pointing to the log file you indicate, libxl-driver.log. The log reported: 1. …libxl__device_pci_reset: The kernel doesn’t support reset from sysfs for PCI device :00:14.0 2. …libxl__xenstor_child_wait_deprecated: Device Model not ready 3. ,,,qemu_pci_add_xenstore: qemu refuse to add device: :00:14.0, mistranslate=0,power_mgmt=0: 4. …libxl__add_pcidevs: libxl_device_pci_failed: -3 5. …domcreate_attach_devices: unable to add pci devices 6. …libxl__device_pci_reset: The kernel doesn’t support reset from sysfs for PCI device :00:14.0 --- [Dom0] Settings: sys-usb “PVH mode is recommended if possible (Linux kernel 4.11 or newer, no PCI passthrough). For Windows qubes always use HVM” Virtualization Mode: HVM “PVH mode is hidden since it doesn’t support PCI passthrough.” --- I changed the setting to PV (the only choice). A note opened stating “Using PV mode exposes ore hypervisor attack surface.” I selected start from the qube manager sys-usb item. A note popped up stating it started, then the same error message was reported. Note: I previously selected both USB controllers in sys-usb Devices. On removing the erroring controller (14.0): Resulted in the same error. On removing the other controller (no controllers selected): Resulted in “Resource temporarily unavailable”. On adding the alternate controller: 1. …xc_assign_device failed: Operation not permitted 2. …libxl__add_pcidevs: libxl_device_pci_failed: -3 3. …domcreate_attach_devices: unable to add pci devices Next: From: https://groups.google.com/forum/#!topic/qubes-users/wdfpne96xhI To be sure I went into Qube Manager, sys-usb->Qubes Setting->Devices and used the "Configure strict reset for PCI devices" button to set it on 00:14.0. I opened sys-usb settings and found the controller listed in the settings pane (on the right). The control button/bar at the bottom entitled "Configure strict reset for PCI devices". I clicked on the controller in the ‘selected’ window, then clicked the strict reset button. The controller was then highlighted. After applying the changes, I restarted sys-usb. It worked. It was unclear that the controller did not already have the strict reset button ‘on’. The newly built vm uses the usb mouse. It is curious that the mouse is also active in dom0. I am using a windows laptop to take notes and work the web including this session. While the mouse works on dom0 on the other machine and the vm, it does not work on the windows machine (probably because it is not plugged into it). I am excited to learn how to work in qubes – being able to jump from dom0 to vms, take notes, post messages, email smoothly. It is
Re: [qubes-users] Re: New Install is Missing sys-USB, How to recover
I very much appreciate all the input. The keyboard is a PS/2. I am in question. We are talking about creating a new AppVM for usb. Is this any different than running: qubesctl state.sls qvm.sys-usb After entering the above command for usb, the output addressed sys-net: Comment: The following requisition were not found: require: sls: qvm.sys-net -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/439addea-31f8-4ecf-b9a0-af11c971e1b2%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Re: Reinstallation Failure
Johnny, I have used the latest Qubes on the same machine that errorred before. This one made it through the installation. I do not know if it did it without error as I don't have networking or USB, but that may be me. Ray -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/3e2c7e81-673f-4872-ae67-deaa1a37362c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Re: New Install is Missing sys-USB, How to recover
jrsm, Thank you, that was a lot of info. This took me to here: https://www.qubes-os.org/doc/usb-qubes/ >From which as root, I executed: qubesctl state.sls qvm.sys-usb 4 succeeded and 1 failed. In sequence: ID: hide-usb-from-dom0-legacy Function: file.append Name: /etc/default/grub ... This one succeeded ID: grub2-mkconfig -o /boot/grub2/grub.cfg Function: cmd.run Result: True Comment: State was not run because none of the onchanges reqs changed Changes: ... This one succeeded ID: sys-net-usb Function: qvm.prefs Name: sys-net Result: False Comment: The following requisition were not found: require: sls: qvm.sys-net Changes: ... This one failed Then there were two other successes for: ID: qubes-input-proxy ID: sys-usb-input-proxy That was the complete emission. I guess the failure signal was the 'Result: False" and all the text was in red. I have checked the terms in the emission but was not able to find anything that looked relevant. It is not clear why sys-net was addressed in the usb process. But I do recall that a usb controller was installed in the sys-net but no wifi. While I have read some about the possibility of using sys-net for usb functions, I don't recall any reference to the installation doing that. Any suggestions? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/99ab8587-2135-4822-8dbc-4910d236fad5%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Can't Start Network, V4
Thank you for your support. I don't know what 'panel' I should see the nm-applet opening in. I opened a terminal in sys-net and entered nm-applet and obtained a response that said it was not meant to run in terminal and to use NetworkManager in the desktop. I don't see a way to open a desktop in sys-net. BTW, my little Linux background is Debian and almost all of it was at the command line using /etc/network/interfaces. My intent was to use Debian to run Xen. But I was not able to find a way to get Debian/Xen to use wireless. Qubes doesn't have this problem, if I can just discover how. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/26fda5e2-0b72-4405-98cd-7b9c4ebdbd9f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] New Install is Missing sys-USB, How to recover
I have newly installed R4.0 on a Toshiba laptop whichis wirelssonly. There is no sys-USB listed in Qubes Manager. How should I 'get' one? How do I determine if my keyboard and mouse pad are on a USB controller? How should this affect the configuration of sys-USB? There are two USB controllers: 00:14:0 ...Intel Wildcat Point-LP USB xHCL Controller 00:1d:0 ...Intel Wildcat Point-LP USB EHCL Controller After installation, sys-net did not work. The USB controller was assigned to it rather than the nic. That is fixed. This may be an installation issue. Is there a wrong way to install that may result in this behaviour? If so, how can I install again and not make the same mistake? Thank you -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/4656751c-1dec-4fcf-8007-b57b36f0a817%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Can't Start Network, V4
I would like to config sys-net to access my wireless AP. I have not found a method to config the network. I looked for /etc/network/interface to see if anything was there but the network folder does not exist. I found suggestions that I could get to them via sys-net settings. I have added 'settings' to the vm through Qube Manager. But when I go to Service: sysnet, sys-net:Settings shows up. But when I click on it, nothing happens. How do I define my AP connections? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/a2bbc97b-20b9-4d51-880d-6b8d7a643486%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Can't Start Network, V4
Thank you. It is great to learn where/what I need to read. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/b0b20163-1d41-4aa5-983b-d4f456c714e3%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Missing sys-USB, Reinstall?
I have recently install V4 on a laptop. I noticed there is no sys-USB. What is the appropriate method to produce one? I currently have no network connection either. The newly installed system had sys-net attached with the two USB controllers and no nic. So I removed the two USB controllers and added the nic. The vm no longer errors out when booted. I am concerned there may be more problems I have not seen yet. This is a new install; is there something I did wrong that would have caused these error? I am going on two weeks trying to fix what I have. Should I just attempt to reinstall? I don't know what I should do differently. Any suggestions? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/a86490d8-db21-4b3c-8ebb-d056c9038986%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Can't Start Network, V4
unman, Thank you. On opening sys-net, there were two USB controllers already attached, one was 00:14.0. So I removed both and added the nic. Sys-net is now running. So I now want to test it. I thought I could just open a vm such as debian, but I found it says it can't have networking. Further reading said networking can be enabled in the Basic tab. I am guessing sys-firewall should be the choice. Then connect with Tor. Bootstrap phase stuck on 5% (10 minutes before I stopped it). There is only one AP and it is open (out of my control). Any suggestions on progressing? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/aacf6589-c820-4439-9af6-b2f54ea5229a%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Can't Start Network, V4
unman Thank you for the trip through the qube. Currently, sys-net is still not working. I have tried both strict and not. And I have rebooted also rebooted after the change. What looks odd is under sys-net device, the wireless card number is 02:00.0 and reports my card. The error message states 00:14.0 which is called out in the device as USB controller. This appears to mean it is trying to use the USB for the network IF. Any suggestions? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/a8ac1864-ad68-4d31-94c5-8f44b811ea22%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Can't Start Network, V4
awokd, > You do have to do it with sudo. In dom0, you are trying "sudo ls > /var/log/libvirt/libxl"? Thank you. I tried that and it did not work. You brought me back and now its working. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/1881d85b-3da8-42a2-b919-593685d29ecd%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Re: USB Keyboard & Mouse Intermittent v4.0rc3
Correct to the above: EHCI not xHCI qvm-pci which produced dom0:00_14.0 USB controller: ... - LP USB xHCI Controller sys-usb (no-strict-reset=True) dom0:00_1d.0 USB controller: ... - LP USB EHCI Controller sys-usb (no-strict-reset=True) Further - I initiated a qvm-start for sys-usb which produced: xl top showed sys-usb as paused for about 60 seconds, then it disappeared from the display. The CLI returned: Start failed: internal error: Unable to reset PCI device :00:14.0: internal error: libxenlight failed to create new domain 'sys-usb' When I execute: qvm-pci attach --persistent -o no-strict-reset=True sys-usb dom0:00_14.0 an error is produced: "'device dom0:00_14.0 of class pci already attached to sys-usb'" Since I don't know if this means the attachment is persistent (it was repeatable after a reboot), I attempted to detached qvm-pci detach sys-usb dom0:00_14.0 qvm-pci detach sys-usb dom0:00_1d.0 Using qvm-pci list, both were gone, no longer listed. So I again performed the attachment as above. Both instances are back in. I do not see any difference from that display. I started up sys-usb from CLI and received the same error about libxenlight failing. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/1b75f23d-25e5-4a81-a364-042705a1971e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Re: USB Keyboard & Mouse Intermittent v4.0rc3
Foppe, Thank you for the command. With out executing it, I ran qvm-pci which produced dom0:00_14.0 USB controller: ... - LP USB xHCI Controller sys-usb (no-strict-reset=True) dom0:00_1c.5 USB controller: ... - LP USB xHCI Controller sys-usb (no-strict-reset=True) I searched for 'attach' and '-persistent' and did not find any descriptions that helped me understand the total functionality of the command. Please help me understand how -persistent impacts this. Additionally, what does the -o do? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/48033464-5ca0-4059-b041-d6afe3cd5405%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Re: USB Keyboard & Mouse Intermittent v4.0rc3
Yethal, Thank you for your efforts. I did not discover anything down this path. Further, when I booted today, the keyboard and mouse came up immediately. I also had my access point running and it was logged into during the boot. Although previously, with the AP available at boot, sometimes it came up without the keyboard and mouse. I am stating this as I had problems with a Debian correctly booting with out a wireless connection. More directly to your suggestions, here are the transaction I performed: OK, I don't know how to paste from dom0 to this fedora disposable vm. I did a sudo xl dmesg | grep VT for VT-d It displays supported pages sizes for iommu 0 It displays supported pages sizes for iommu 1 Snoop control not enabled. dom0 dma passthrough not enabled queued invalidation enabled interrupt remapping enabled shared ept tables enabled "Its risky to assign' address 'with shared rmrr at" address for Dom1. xl dmesg for strict displayed (XEN) - Unrestricted Guest xl dmesg for pci did not produce anything xl dmesg for usb did not produce anything I checked all the above just after booting into the system. I then started up USBvm from the application menu while having xl top running. As before, it showed paused for about a minute and then disappeared. I ran the above queries again and obtained the same results. Any suggestions? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/9239dac6-27e1-4543-9681-feebeefd1d04%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Where is Chrome once installed?
How to do I get Chrome up? The instructions worked great: I right clicked on the desktop, highlited 'personal', selected Firefox from the context menu. Firefoxed worked, so I navigated to this forum, found this thread and copied the line to install Chromium. I opened a Fedora25 template, terminal and input - sudo dnf install --enablerepo=google-chrome google-chrome-stable answered 'yes' a couple of times and success. It was done. Back to dom0, right click on the desktop, selected applications, right clicked on Fedora 25 template and there was no Chromium, which I expected to look just like the personal Firefox. Did I do something wrong? What might I have missed? BTW, I am a newbie, I have installed v3.2 for a couple weeks, moved to v4.0 (experienced unstable USB), and loaded v4.0 rc1, rc2, and now rc3. USB keeps getting more stable. Sometimes the laptop still boots up without a keyboard or mouse. Ray -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/3903ef99-7503-495d-8b7d-4eba2df48682%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] How to Setup Wireless
Yuraeitha, Thank you. That was great detail. I think I will redirect output to one continuos file to collect all VM info and use that file to record my progress. My biggest obstacle is that when the machine boots up, I do not always get a keyboard (laptop). Plugging in a USB keyboard and mouse does not always work Maybe this is related to the VMs. My fist install of V4 was with a docking station attached. Keyboard and mouse functionality was intermittent but if the embedded set did not work, I could plug kbd into the laptop USB slots or docking station. To fix this, I reinstalled V4 without the docking station. The kbd is less predictable/controllable. In both cases, I have found that repeated reboots sometimes production es a functioning keyboard. I have also found that letting the laptop sit for a while will sometimes provide the keyboard. This latter feature is what leads me to consider that service VMs may be at play. I have "newly" loaded the latest two versions of Debian over 30 times and 3 installs of Qubes-os. I am open to experimenting. My challenge with Debian was getting wireless to work with Xen bridging. On Nov 24, 2017 4:02 AM, "Yuraeitha" <yuraei...@gmail.com> wrote: > On Friday, November 24, 2017 at 2:01:18 AM UTC, Ray Joseph wrote: > > Yuraeitha, > > > > Thank you. All of that was news. The need to run all VMs as HVM is the > only one that seems to be a concern. When I get wifi working, I never lose > it. > > This was a fresh install and I am testing with this machine. > > > > I haven't been able to find how to convert existing VMs to HVM. Please > suggest where I might find this. I've been going through docs and have not > found it. > > > > Ray > > Good to hear you got stable WiFi :) > > Almost all (if not all) the docs are currently out-of-date when it comes > to Qubes 4, but up-to-date when it comes to Qubes 3.2. > > This is why there is currently no doc for changing PV to HVM, or vice > versa. HVM is prefered for security in Qubes 4, however both modes can give > different hardware trouble. For example I personally get issues running PV, > despite having PV working flawlessly back in Qubes 3.2. Others from what I > can read might have issues with HVM, and need to fall back to PV instead. > > That's why you can switch to whichever mode is preferred. But in terms of > security HVM is better than PV. However HVM is not perfect either, but > nontheless an improvement over PV. From what I've seen the developers > discuss, it seems like the plan is to move towards PVH in a future Qubes > release. This is in turn an improvement over HVM. So PV < HVM < PVH. So you > want HVM for now, but can change to PVH in a future Qubes release, probably > with the same command by then. > > Unfortunately there is no easy way to print out which VM is in PV or HVM. > At least, I haven't found it if there is any. The usual 'qvm-ls' command, > usually used to print VM information like disk usages, network use, > template use, etc. still appears to be in Qubes 3.2. version. For example a > PV/HVM print in qvm-ls would seem like something extremely useful to add > into the qvm-ls tool, so my guess is it's still something that needs > fixing. Especially when PVH is added to the mix in a future Qubes release. > the format, for example 'qvm-ls --format-help' doesn't give any PV/HVM > information either in any of the various flags to print more details of > different kinds. (btw, the qvm-ls --format disk' command is useful if you > want to know how much each VM is using disk space, now that the Qubes > Manager has been removed in Qubes 4. It can be troublesome if one of your > VM's is eating up a lot of disk space and you can't find which one, > especially on small SSD drives. That command can help with that. > > Anyway, back to the PV/HVM issue. The command to print PV/HVM, if you're > not familiar with the command already, then it can also give other VM > information, try type 'qvm-prefs vm-name' on whichever vm you want to check > VM preferences on. You'll see the virt_mode in here for the PV/HVM, along > with various other VM specific preferences for that VM. > > Optionally; for less terminal spam, you can type in this instead: > qvm-prefs vm-name virt_mode > > If it gives you back PV print in terminal chat, then use keyboard > arrow-up, so you can re-use the same command again, and then add HVM > afterwards, so it becomes like this > > qvm-prefs vm-name virt_mode HVM > > Then repeat, go through all your VM's that might be in a PV state, be it > TemplateVM's, AappVMs, ServiceVM's, DisposableVM's, etc. > Probably all your VM's originating from Qubes 4, are already set to HVM, > but almost certainly, any VM you got from a
Re: [qubes-users] How to Setup Wireless
donoban, Thank you. It is now running in dom0. I changed to v4.0RC1. My vms start intermittently so it is a challenge to test further. I guess I could practice in v3.2 until v4 matures. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/8cd83d2c-a615-431f-90f7-6dfa8fba7724%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Does v4 RC2 get updated?
Mine is not working, it won't load VMs. If this replace prior to scheduled release date? When I go to the download page and click on 'version', focus changes to the bottom of the page but I don't find anything about interim releases. Ray -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/30fd2529-13f5-451b-8e06-6e954d6a7539%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Reinstallation Failure
The reinstallation of v4.0 rC2 fails with: [ 0.00] Firmware bug: TSC_DEADLINE disabled due to Errata: Please update microcode to version: 0x25 (or later) [ 10.347567] dracut-pre-udev[460]: rpc.idmapd: conf-reinit: open(“(null))”, 0_RDONLY) failed. [ 10.347896] dracut-pre-udev[460]: rpc.idmapd: conf-reinit: open(“(null))”, 0_RDONLY) failed. The above progresses to a graphic display with a large Q in the middle near the bottom of the screen. A progress bar below that shows installation has started but it never progresses. I turn it off after 30 mins. v4.0 RC2 was running on this Toshiba laptop. I wanted to update the BIOS. I could not find a way to do that with the OS. So I put Windows 10 on it, rant the BIOS update, booted to Windows 10 a couple times then tried to install Qubes. Searching the web, I found sub=phrases of the above but could not find any specifics and the higher level dracut problems seem to have been resolves in previous version. Please suggest how I might trouble shoot this. Ray -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/15dde721-6f9e-4812-8ea1-f9b0c9d9976a%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] How to Setup Wireless
How do I enter my password? In Debian9, I installed wpa_supplicant to include a key in network/interfaces. Should this same method be used for sys-net? Where would I find this type of information. Searching the Qubes-OS doc, I only found one reference to wireless and that was how to unload and load the wirel drivers. BTW, I had cloned sys-net vm to experiment. But it would not start. Andrew pointed to developer docs where it was stated that a vm that would use a device already in use will not start. https://github.com/QubesOS/qubes-issues/issues?q=is%3Aopen+is%3Aissue+label%3A%22C%3A+doc%22 Just for the record, since I will probably forget that. Thanks, Ray -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/643c03db-6170-4be2-ae55-7a256fa667c0%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Why is there no qubes manager in V4.0?
On Sunday, October 29, 2017 at 1:52:53 PM UTC-5, David Hobach wrote: > On 10/29/2017 03:36 PM, Sergio da Matta wrote: > > Dear David, Thank you for your information. I did not know conky. I liked > > it but I did not find the repo. Did you installed on dom0? > > Yes, sudo qubes-dom0-update conky does it. > I attached my config for your convenience. > > KR > David David, Thank you for sharing your config for conky. I am going to install v4 and then conky. Ray -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/3a8bcb18-eb79-4763--bf247642248e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] qubes 4 documentation
On Saturday, October 28, 2017 at 2:58:48 PM UTC-5, Andrew David Wong wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA512 > > On 2017-10-21 09:39, Roy Bernat wrote: > > Hi > > > > there are a lot of changes between qubes 3.2 and qubes 4 . > > > > for example - dispvm , qvm command and more is there somewhere dedicated > > > > docs for it ? > > > > Roy > > > > Since Qubes 4.0 stable has not yet been released, most of the > documentation for it is still being written. You can find these > tasks in individual qubes-issues with the "doc" label: ... Andrew, Thank you, that opened a whole new set of information. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/860c580c-b803-4b7a-90c4-282cc0941c92%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Where is Documentation for v4.0
I would like to get off to a safe and efficient start. Where might I find the latest documentation. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/152280fa-ffa6-4adc-9980-ff2290ed4ec8%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] How to Get Wireless Network Connected
I would like to get networking running on v3.2. I installed from a download to a USB from Debian 8. I have now replaced Debian 8 with Qubes OS v3.2. When installing, I had both a w ireless hotspot and a USB3 connected Ethernew dock. Neither one worked on boot up. I am running version 3.2 on a Toshiba laptop. I have used this machine to run Debian 8 with wireless. I am not getting a connection. I get an error window about 120 seconds after booting: ERROR: Tor Bootstrap Result: Whonixcheck gave up waiting. Tor Circuit: not established Bootstrapping 5% done ... Possible issues: - is the host's internet connection working? - Whonix-Gateway will need a few moments for bootstrapping the Tor network. - Do you live in a censored area? I am using the same Verizon access point I used on Debian. A listing of points from a terminal in sys-net shows the access point. Inside sys-net: dmesg | grep iwlwifi produces: Direct firmware load for iwlwifi-7265D-19 failed with error -2 Direct firmware load for iwlwifi-7265D-18 failed with error -2 Direct firmware load for iwlwifi-7265D-17 failed with error -2 Loaded firmware version 16.242414.0 op_mode iwlmvm ... wlp0s0: renamed from wlan0 I have some concerns: 1) The system is trying 7265D-19, -18, -17, and fails then loads -16. In Debian, it tried 25, 24, 23 and loaded 22. It would not load 26 which is the newest I could find. Is there a concern for using such old drivers? If so, is there anything I should do? 2) The wifi name was renamed. Where does this happen and why? Are there any implications? lsmod shows the iwlmvm and iwlwifi are loaded. modinfo iwlmvm shows iwlwifi,mac80211,cfg80211 ip a shows wlp0s0 to be down. ifup wlp0s0 says it is not configured. sudo rmmod iwlmvm says it is not loaded. sudo modprobe iwlmvm there was no response ip a shows wlp0s0 still down. I am not sure where to go from here. Any help would be appreciated. I plan to change to v4.0 this coming week. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/1d6365fc-a1a7-4406-bbdd-8e899d07cae9%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Why is there no qubes manager in V4.0?
On Saturday, October 28, 2017 at 12:40:21 PM UTC-5, Sergio Matta wrote: > Em sábado, 28 de outubro de 2017 09:14:29 UTC-2, [799] escreveu: > > Hello, > > > > > While I do know how to use the cli tools I > > > enjoy a gui for at a glance viewing and tasks, > > > it is much easier to press start/stop on a > > > nice list rather than type two commands. > > > > While I appreciate the new features in Qubes 4, the lack of a graphical > > frontend like Qubes Manager is a step backwards, as Linux is always about > > choice. > > Can't someone program a very simple GUI which offers the following > > functions: > > > > 1) show all VMs with the option to hide: > > - internal VMs (I really hope to get this setting back from Qubes 3.2) > > - Template VMs > > - all VMs which are not running > > > > 2) indicate which VMs are running > > > > 3) offer the option to do the following actions on a VM: > > - start > > - restart > > - shutdown > > - kill > > - open preferences > > > > Nice to have: > > > > 4) maybe also: attach/remove USB and Block-Devices > > > > 5) show an icon if an USB/Block-Device is mounted > > > > I think that having the options 1 - 3 is perfectly fine, as this will make > > the interaction with VMs easier (also for newbies who come from any other > > OS). > > > > Please don't get me wrong, I like the new widgets as they offer additional > > options, but a central cockpit to do basic tasks is missing. > > > > I can live without additional features like performance metrics in Qubes > > Manager, but the basic tasks would be great. ... > > There is many of those requests ready. The running vms you can see using xfce > bar with generic monitor (ls --fields ip,name,state). Look these pictures. This solution looks appropriate. I am new to quebes and found the vm manager challenging using v3.2. I have not tried v4. But I am not familiar with the xfce bar and the pictures didn't look like the xfce panel on v32. I will move to v4 this coming week. I did not getting anything working on v3.2, I would like to get to a better start on v4. I would apprecitate any suggestions on how to better use the tools provided to manage vms. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/c61edda6-6146-4c7c-b9af-31f428e5f8d9%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Can't Read Text in Qubes VM Manager
I am running version 3.2 on a laptop with a 4K display. I have increased the font size so I can just read it. The font overruns the fields in VM manager. I would like to know how I may work with this or work around it. Thanks, Ray -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/a1f334c9-510c-4d02-bd45-781e5fab5e12%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Re: How to Make APP Fonts Larger [Solved]
I noticed that before I log in, there is a menu bar across the top of the screen. There are fouritems in the upper right: The left most icon is a circle with the letters 'Xf' (quite small), clicking produces a radio button labeled xfce session. The second is the phrase en_USutf8, clicking produces a list of languages. The third is a stylized person icon, clicking produces two selection boxes, one for 'Increase FontF1', the other is 'High Contrast F2'. The fourth is a power button, clicking produces a selection list including: Suspend Hibernate (grey) Restart Shut Down... Alt+F4 I did not detect a change at the desktop for either selection for xfce session. The increase font selection only changes the font for the sign-on screen, not the desktop. is an icon (too small to read) that when I click on it, it produces a window with two selections: 1 -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/f9b57ff5-a792-45e9-b291-0b2e2d1df553%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Re: Keyboard and Mouse Pad not Working [Solved]
On Saturday, October 21, 2017 at 8:06:57 PM UTC-5, Ray Joseph wrote: > On Wednesday, October 4, 2017 at 6:31:49 AM UTC-5, Ray Joseph wrote: > > After rebooting tow more times, the keyboard and mousepad became functional. > > > > Ray > > I have continued experimenting and and ran into to losing the input devices > again. A day or so later, the I/O would come back up, and they go away > again. > > As I am relatively new to Linux, I dumped the journal to file and pulled it > into Excel. I tagged those sections where I had not I/O; filtered, color > coded, sorted. I could not find a correlation between no I/O and journal > entries. Is there another resource I should be looking at? > > I have just found that the laptop time/date was off. So I went into the BIOS > and set it to UTC. When it booted up, I/O was available. I have rebooted a > couple times and I/O has been available each time. > > I don't know if this is 'fixed'. > > When the I/O was not available, I took pictures of messages during the boot > process and transcribed them (partially): > [FAILED] Failed to start Load Kernel Modules. > See 'systemctl status systemd-modules-load.service' for details. > [ 10.108174] systemctl[1]: Failed to start Load Kernel Modules. > OK > OK... > Starting Show Plymouth Boot Screen... > Starting dracut initqueue hook... > 11.851549] [drm:intel_dp_link_training-channel_equalization [i915]] *ERROR > 5.4 Gbp link rate without HBR2/TPS3 support > > After reading the above error, I went back to the journal file and found that > 'failed' showed up often in the file when there was no I/O. I will study > this further to see if I can get a better idea of what is happening. > > BTW, I web searched for the above error and found this error to have occurred > in fedora and ubuntu; but those were consistent - they were not intermittent. > I never found whether there was a related I/O failure. > > If anything changes, I will report it back here. > > Ray I compared the output of the screen after a keyboard/touchpad failure and a successful boot. The FAILURE lines are still there: [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. [ 10.108174] systemctl[1]: Failed to start Load Kernel Modules. The 'OK' lines were still there. The last three lines were missing: Starting Show Plymouth Boot Screen... Starting dracut initqueue hook... 11.851549] [drm:intel_dp_link_training-channel_equalization [i915]] *ERROR 5.4 Gbp link rate without HBR2/TPS3 support Ray -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/f72ba143-abb1-4fa3-bf61-9e931a5a7178%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Safe Modifications Method for netvm
I would like to assure that I have a safe way to modify netvm. I want to test configuring of a eth port and a wireless port. I would like to have a copy of the original, and keep copies of my test vms and possibly keep two (one wired one wireless) for normal use. I don't know how to copy a vm none the less a safe method to develop modifications, versions and release versions. I would like to understand how to carry out these type of tasks in qubes. Thanks, Ray -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/22f72f43-f518-4060-9d04-d691908cd18b%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Newbie Network Trouble Shooting
Networking is not working on my new installation. After boot and a couple minutes, an error window opens stating problems with Whonix. It address a difficulty in working with Tor. I would like to look into networking but I don't know which VM(s) setup the network. My networks available are an Ethernet through the USB3 port to a docking station to a corporate/guest portal. I have used this with Debian 8 on this same laptop before loading up Qubes. The other network is wireless with a Verizon hotspot which also worked with Debian 8 on the same machine. For example, to run the wireless network, I would like to know which VM to provide the ID and password. And what is the appropriate method in Qubes to enter these? Ray -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/63633411-83fc-45d4-a9e8-9afb9b595beb%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Re: Keyboard and Mouse Pad not Working [Solved]
On Wednesday, October 4, 2017 at 6:31:49 AM UTC-5, Ray Joseph wrote: > After rebooting tow more times, the keyboard and mousepad became functional. > > Ray I have continued experimenting and and ran into to losing the input devices again. A day or so later, the I/O would come back up, and they go away again. As I am relatively new to Linux, I dumped the journal to file and pulled it into Excel. I tagged those sections where I had not I/O; filtered, color coded, sorted. I could not find a correlation between no I/O and journal entries. Is there another resource I should be looking at? I have just found that the laptop time/date was off. So I went into the BIOS and set it to UTC. When it booted up, I/O was available. I have rebooted a couple times and I/O has been available each time. I don't know if this is 'fixed'. When the I/O was not available, I took pictures of messages during the boot process and transcribed them (partially): [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. [ 10.108174] systemctl[1]: Failed to start Load Kernel Modules. OK OK... Starting Show Plymouth Boot Screen... Starting dracut initqueue hook... 11.851549] [drm:intel_dp_link_training-channel_equalization [i915]] *ERROR 5.4 Gbp link rate without HBR2/TPS3 support After reading the above error, I went back to the journal file and found that 'failed' showed up often in the file when there was no I/O. I will study this further to see if I can get a better idea of what is happening. BTW, I web searched for the above error and found this error to have occurred in fedora and ubuntu; but those were consistent - they were not intermittent. I never found whether there was a related I/O failure. If anything changes, I will report it back here. Ray -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/7395d5b5-1e9a-4394-885b-725a0105b470%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Re: How to Make APP Fonts Larger [Solved]
> > I've tried this, and the menus do change, but the apps don't. I'm unable to > change the appearance on AppVMs, and the changes in Dom0 do not affect them. > What can I do? Hugo, You have gotten farther than I have; I have not gotten a VM up yet. But I don't think that changing properties in dom0 will change anything in VMs. I would think this would need to be done in the VM. I wonder if it would work by doing it in a template. Good luck, Ray -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/1b066554-a1bd-4674-9e4f-9337f5d79044%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Re: Keyboard and Mouse Pad not Working [Solved]
After rebooting tow more times, the keyboard and mousepad became functional. Ray -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/675b7b12-4341-4e9c-9a1a-9a9ddafb7614%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Re: How to Make APP Fonts Larger [Solved]
I found that right clicking on the desktop produced a menu with the item Applications. This has a menu item System Tools. The included item here is Appearance. The tab in Appearance is Fonts. This is where it gets fun. The Default font changes the fonts right on the app so it has instant feedback. At the bottom of this Appearance window is a Custom DPI setting. Luckily, I had a terminal open. Where I really had a challenge with font size is in the terminal. By increasing the DPI, the terminal fonts grew. They grew so fast that all the fonts went off the page. I just hit the Enter/Return key and it was aligned again. I increased the DPI to 164 and the terminal was just what I needed. I hope this helps others. I sure it will help me the next time I reload the system and have forgotten what to do. Ray -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/73e37960-fdb6-4c20-8fa3-053d6bab6bb1%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] How to Make APP Fonts Larger
I just installed R3.2 on a Toshiba Satellite. I had been running Debian 9. The laptop has a 4k display. The fonts in the apps are very small. I found that I can increase the size of fonts for desktop icons. How can I increase the font size on the apps? Thank you, Ray -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/dae61703-cca8-436f-936e-32dc41835f7e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Keyboard and Mouse Pad not Working
I just installed R3.2 on a Toshiba Satellite. I had been running Debian 9. I installed to a USB drive with dd after checking signatures. The installation went fine use the mouse pad and keyboard. After installation and reboot, I selected defaults and the sign on screen came up. It did not respond to either laptop keyboard or mouse pad. So I plugged in a USB mouse, it worked fine but there was no response to the laptop keyboard. I plugged in a USB keyboard and was able to sign in and navigate around. I have looked up a variety of issues on laptop keyboards, but those that seem close address files in the /etc folder which Qube doesn't seem to have. 1) How can I pursue the making the laptop keyboard and mouse work? 2) Where can I find a graphic of the Qube folder structure? Thank you, Ray -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/28ee40e8-be6c-4d57-a7cb-297bb4873bd2%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
