On 2020-08-11 at 18:15 -0700, BGW wrote:
> I hope that I've explained this well enough to be understood.
>
> Anybody got any ideas what is going on? Thanks for any help.
Try starting them from a dom0 console (qvm-start). Sometimes, you will
find there details that point to the solution, such as
Thanks for all your work, Joanna!
Good luck at the Golem Project.
I am sure that having you on board it will feature many 'interesting'
properties that otherwise it wouldn't.
Remember to s/אמת/מת/ should you have trouble with the golems 😉
Best regards
--
You received this message because yo
On 2018-08-18 at 07:09 -0700, Marcus Linsner wrote:
> Since systemd exposes the hostname "_gateway" (ie. `ping _gateway`) on
> systemd OSes, does this pose any security risk if any website decides
> to use that hostname to access your router?
>
> On appVMs this apparently can't be an issue, becaus
This paper is most interesting for the discovery of multiple ways email
client leak information on visualization.
(not clearly stated in the paper: some of them are already fixed, while
in other cases the developers are still working on providing them)
Luckily, with Qubes it is easy to set a firew
Steve is right in the wrong placement of sudo, but I don't think
brackets would do (that would create a subshell in your current sh).
You simply need to add sudo in front of dd, which is the only one that
needs elevated privileges, ie.
openssl enc -aes-256-ctr -pass pass:"$(dd if=/dev/urandom bs
You can configure the software inside your TemplateVM.
I would place your favorite Firefox settings in a .js inside
/etc/firefox (or /etc/firefox-esr)
Note that this is done with the internal names (ie. as if done with
about:config), so it may be a bit hard need a to find out the mapping
with the
On 2017-07-31 at 12:15 +, Kelly Dean wrote:
> In Qubes 3.2 with i3, in any qube, regardless of which template I use, and
> regardless of which physical keyboard I use, the right Alt key is useless
> when mapped as AltGr, because it generates spurious Alt_L events.
>
> With a standard America
Really basic hints, but often those end up being the hardest to realize.
> attaching audio input to the VM i'm listening music in does nothing.
Did you enable audio input for this VM?
(Right-click the VM on qubes-manager and choose "Enable audio input", or
press the mic button on the toolbar.)
On 2017-05-18 at 07:20 -0700, loke...@gmail.com wrote:
> I regularly compile the latest version of Emacs for use in my development VM.
> I simply compile Emacs from the git repository and install it in /usr/local.
> All works the way it's supposed to.
>
> However, I now have more than one VM whe
On 2017-05-01 at 18:32 -0700, Gaiko wrote:
> On Monday, May 1, 2017 at 6:40:40 PM UTC-4, Ángel wrote:
> > On 2017-05-01 at 12:34 -0700, Gaiko wrote:
> > > Thoughts?
> >
> > Does your desktop file validate?
> > ie. run: desktop-file-validate open_work_vm.desk
On 2017-05-01 at 12:34 -0700, Gaiko wrote:
> Thoughts?
Does your desktop file validate?
ie. run: desktop-file-validate open_work_vm.desktop
If the desktop file is malformed, it will be bypassed silently.
--
You received this message because you are subscribed to the Google Groups
"qubes-use
Ted Brenner wrote:
> What is the best way to add and partition disks in dom0? I just added
> some hard drives that I'd like to format and partition and then pass
> those to a guest VM for storing my person files. With xfce, I don't
> see any GUI based disk utility. Does this have to be done via the
Chris Bensch wrote:
> I'm running Qubes 3.2. I have a Debian HVM that works perfect when using the
> default sys-firewall as the netvm. If I change the netvm to another proxyvm
> such as a VPN (https://github.com/Rudd-O/qubes-vpn) or change it to the
> default sys-whonix, I lose all connectivi
Bernhard wrote:
> Thank you Angel, for helping me.
>
You're welcome, Bernhard.
> and, as I said, nothing starts. I start thinking of a disaster-mode data
> recovery since I do not know how I could possibly unbrick a system that
> has no network anymore?!
That's just because most VMs depends o
Garrett Robinson wrote:
> I am working on transitioning my day-to-day software development work to
> Qubes. The primary challenge that I face is widespread use of Vagrant
> for provisioning development environments. I am aware of the challenges
> and concerns around hacking Qubes to achieve nested
Bernhard wrote:
> Hello, I bricked my system a bit. Yesterady I decided to follow the
> ..onion update procedure. For dom0 all went well (after reading that I
> must change to whonix-net),but I had to modify the debian-8 and
> fedora-24 repo-files "by hand". No big deal. I could update f24 (this
>
Drew White wrote:
> What is the easiest way to truncate a non-linux HVM filesystem so that it can
> be smaller and take up less space?
>
1. Resize the filesystem from inside the HVM in a supported way (maybe
with a Live CD?)
2. Actually truncate the backing file
--
You received this message be
Pushpins4u wrote:
> When I try this process now, the PDF conversion progress window gets
> to like 95% full and then hangs. I'm notified that a script appears
> to have hung and asked if it should be terminated. This is happening
> consistently with the same PDF.
>
Does it only fail with *this*
Steve wrote:
> On Thursday, January 12, 2017 at 4:51:44 PM UTC+4, Steve wrote:
> > I would like to be able to run Spinrite which runs in DR-DOS in a VM. The
> > software needs to have direct access to the SATA hard drives. Is this
> > likely to be possible
>
> I have been researching and to make
sbore...@gmail.com wrote:
> Thus, is there a (documented) way to add a newer kernel to the 3.2 install
> image? I'd rather avoid taking the SSD out and install qubes in my older
> machine.
>
> Thanks in advance,
>
> Stefan
For booting the install or for being installed?
I expect that changing
Steve wrote:
> my default net-sys includes both Ethernet and Wifi. I wanted to split them
> out into
> net-sys-eth and
> net-sys-wifi
>
> each with the appropriate PCI device. I tried to clone the net-sys but it is
> greyed out and I was wondering why
>
Probably because it is running. Stop
mittend...@digitrace.de wrote:
> Hey there,
>
> today I noticed that my dispVM is no longer working (not in Dom0 and not
> in AppVMs). There is the notification that the DispVM starts, but
> nothing shows up.
> If I start the internal fedora-23-dvm I boots up without any problems
> and also allows
Steve wrote
> I need to run Samsung Magician software in Windows to flash the firmware of
> the SSD's I put in the laptop, is there any special way I need to setup the
> Windows VM to give direct access to the firmware
>
I don't think that is going to work at all. If you really need to do
that,
Andrew wrote:
> What's your highest DispVM number you've accomplished through legitimate
> daily use?
About 10, achieved while debugging them. DispVMs don't work here :)
(courtesy of https://github.com/QubesOS/qubes-issues/issues/2182
I wish there was an option to disable savefiles usage. Slow-to
kreil...@gmail.com wrote:
> My question is:
> how can I manage to print directly on my network printer?
> or:
> how to copy files (without using a usb hdd or something like this)from my
> windows hvm to my printer appvm?
You could connect the Windows VM to a printer-vm per
https://www.qubes-os.o
Nicklaus McClendon wrote:
> On 01/09/2017 08:12 PM, Caleb Thompson wrote:
> > Update: I'm trying to figure out why the report says I have no
> > IOMMU when my BIOS says I'm set to VT-x. Are they different things?
> > Is an IOMMU something I can take my computer to a computer store to
> > have added
Robert Mittendorf wrote:
> The second and third post were send as a new mail (not a reply).
> Why do these mails appears as answers here?
Where is "here"? The google groups web interface?
> The first post was send as a reply to the mailing list, changing the
> topic and expecting to create a new
Daniel Moerner wrote:
> On 01/08/2017 04:14 PM, haaber wrote:
> > Thank you. Doing this, I have compose key in dom0, but not in any
> > other domain. Do I miss something? Bernhard
>
> Hi,
>
> Please remember to reply to the list as well. For me, using Left Win,
> this setting sets the compose
qmaster...@gmail.com wrote:
> Please tell, how can I enable sharing the compiled-and-installed-from-source
> software with the TemplateBasedVM's ? Or it is discouraged by Qubes to
> compile the software by yourself?
It should be working:
* Place the files in the TemplateVM (somewhere different t
Marek Marczykowski-Górecki wrote:
> Fixes for both issues already merged:
> https://github.com/QubesOS/qubes-app-linux-split-gpg/pull/7
> https://github.com/QubesOS/qubes-core-agent-linux/pull/32
>
> Thanks Nicklaus!
Is there a flag so that qubes-builder picks the master branch instead of
the las
anti-sec...@re-gister.com wrote:
> Hello @all!
>
> I installed the default arch community template using,
>
> sudo qubes-dom0-update --enablerepo=qubes-templates-community
> qubes-template-archlinux
>
> But when I click on the update button I get an error:
>
> ::Synchronizing package databases.
haaber wrote:
> Hello,
>
> I wanted to provide my fedora template with mplayer (command line
> version). But according to dnf / yum that does not exist (?). This seems
> a subject on its own in stand-alone fedora (f22 at least), and have
> qubes-fedora won't make it more easy, I fear. I could l
pixel fairy wrote:
> when booting qubes-os on a mac (hardware 11,3) filevault stops accepting the
> passphrase and you have to use the reset key to make a new one.
>
> ive only done this with an external drive. for some reason, qubes is either
> writing to the internal drive, or the mac firmwar
Otto Kratik wrote:
> Is there any way to easily refresh/restore the System Tools shortcuts,
> without having to add each one back manually in some obscure way? I don't
> even remember what all the normal items under that menu are, but they
> suddenly just vanished without warning or explanation,
Pawel Debski wrote:
>
> > How do I check whether it is really mounted in dom0?
> > (I think it is not, but maybe I'm doing something wrong
> notification bubble should pop up on the screen. I think its usually sr0 or
> something.
>
> What would be the right command in Konsole?
>
Try doing:
35 matches
Mail list logo
