Hello Wrenches,
Deep appreciation for saving me much time and hassle in beta testing products
that are released to market prematurely.
Happy to report that the Conext Combox and the Conext Insight portal from
Schneider is working very well for me it is a robust remote control, monitoring
datal
I have the Seek unit also. Works great for the price. You can save images
and videos.
It has so far found for me questionable connections on 2 different battery
installs, a poorly torqued charge controller output terminal, and a skunk
hiding under my back porch.
The unit paid for itself very qui
Bill,
If you are looking for a less sophisticated and less expensive unit,
I recently purchased (on Amazon) a Seek Compact Thermal Imager that
plugs into the port on my iPhone for $236. A downloaded app runs it,
and it shows thermal images on the phone's screen. To date I
Wrenches,
Talk to Flir, sometimes they got demos, sales or upgrades, l had one of
there higher end models ands it has more detail then my 1000 dollar one
does. Flir has lease deals too.
Jerry
On May 16, 2016 12:10 PM, "b...@midnitesolar.com"
wrote:
>
> We use several FLIRs here at MidNite... Inv
Yes, by manually disconnecting the power but as mentioned not with the auto
reboot with Rev. 15.
From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf
Of William Miller
Sent: Monday, May 16, 2016 3:06 PM
To: 'RE-wrenches'
Subject: Re: [RE-wrenches] Optics RE rel
Gary:
Are you able to reliably re-establish connectivity by rebooting the Mate3?
I was informed today that the power to the Mate3 is on the Orange/White pair.
I have the ability to control a relay remotely that could open a relay on these
leads. If this will reestablish communications
We use several FLIRs here at MidNite... Invaluable tool for LOTS of
reasons.
You can by a FLIR E4: 80 x 60 resolution brand new on Amazon for $925.
There are other deals for less than this as Marco pointed out, too.
boB
On 5/16/2016 2:39 PM, Marco Mangelsdorf wrote:
Yes, Bill…I’d recomm
Yes, Bill.I'd recommend going with a Flir. You should be able to find a
Flir 4 for something around $1,000 on eBay.
This tool is invaluable when it comes to identifying hot spots. Now getting
the manufacturer to do anything about it without pulling the mods out of the
string and testing the *
We have been having problems with the Mate 3 Optics RE since we installed it at
the beginning of 2014. Ours is a battery backup system for a grid tied
install. We just got off the phone with Outback this morning after upgrading
to Rev. 15 two months ago and we are still having the going offlin
Fellow Wrenches,
Has anyone made use of any InfraRed (Thermal) cameras for diagnosing
module performance faults?
Thanks,
Bill Loesch
Solar 1 - Saint Louis Solar
314 631 1094
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_
We have reported to Outback that the Mate3 OpticsRE will stop reporting if
the internet goes down for a while. In the Caribbean, we have some outages
and the M3 does not handle them well. I think there is an option to reboot
the M3 daily, I would try that. You can be pretty sure it is not a cable
Our Optics systems spend more time offline than online. Outback
continually provides good technical support but they are unable to
permanently resolve this connection issue.
Luckily we only have a couple Optics systems but we have been dealing with
this same issue for around a year. In most inst
Our other significant experience has been that the Mate3 will stop drawing
graphs after a few days, but I don't have the latest firmware add I am
traveling and have not had time.
On May 16, 2016 4:07 PM, "William Miller" wrote:
> Friends:
>
>
>
> We just installed our first Optics RE systems. T
Friends:
We just installed our first Optics RE systems. They are both at the same
location connected to a satellite data system. In the three weeks these two
systems have been on line, they have become disconnected several times. The
latest time both Mates disconnected but we were able to re
Hi Jay,
I've used the Milbank K4977 taps for a few supply side connections in Milbank
meter sockets. They make for a fast and clean connection. I would highly
recommend them as long the utility will allow it.
Best,
Garrison
Garrison Riegel
Solar Service Inc
-Original Message-
F
Looking for a "new" or used Evergreen module to replace a broken one.
Please contact me off list if you have one available.
Jason Szumlanski
Principal Solar Designer
Florida Solar Design Group
___
List sponsored by Redwood Alliance
List Address: RE-wren
16 matches
Mail list logo