Re: [RE-wrenches] older magnum MS - capacitor remedy

Hi Greg Should be a minimum 300 vac usually 370 vac rated. Gary Gary Baxter Marketing Manager Magnum/Dimensions > On Feb 17, 2015, at 10:34 AM, Greg wrote: > > Gary, > > We've had problems from time to time with toyostoves and other sensitive > electronics not liking the waveform coming f

Re: [RE-wrenches] older magnum MS

Sorry for the late reply. I did confirm what our customer support said which is the PAE models had the search mode setting improved but that was about it. In the case of sensitive controls it is most likely distortion causing the issue. As suggested a 50mf cap at the appliance sometimes can help

Re: [RE-wrenches] 24V Zephyr Vent Fan from a Magnum MS4024PAE inverter

Hi Chris, All the aux relays are voltage controlled so not sure what setting you would use to activate the fan? I would assume you are trying to turn the fan on based on high temperature in an enclosure or something so battery voltage wouldn’t be a good indicator. We have military and vehicle ap

Re: [RE-wrenches] Battery cabinet

[Accessories and Parts] You might try these. This is a "trailer breakaway battery box" . these are made to mount on the tongue of a trailer (so water proof) and carry a small battery to activate the trailer breaks in case it come

Re: [RE-wrenches] Spare SW4024 anyone?

Try Inverter Sales and Service Whitehouse TN Local: 615-672-1142 They have been repairing SW since the 1990s Gary From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Jerry Shafer Sent: Monday, December 22, 2014 2:04 PM To: RE-wrenches Subject: Re: [RE-wrenches] Spa

Re: [RE-wrenches] Magnum System - Discharged Battery Bank

It's 4.4 (x2) I parallel so should be ok. Usually if the battery based inverter is too small the SB would "push" the voltage around until the SB disconnects. Gary Baxter Product Manager Magnum/Dimensions On Dec 18, 2014, at 9:52 AM, Drake mailto:drake.chamber...@redwoodalliance.org>> wrote: O

Re: [RE-wrenches] Magnum System - Discharged Battery Bank

Good point on the battery monitor. It would be easy to add a Magnum BMK to system and get the battery history. Also the ARC (advanced remote control) stores fault history so you can see when the LBCO occurred along with battery voltage etc. Gary Baxter Product Manager Magnum/Dimensions On Dec

Re: [RE-wrenches] Magnum System - Discharged Battery Bank

Remember this is an AC coupled system so it does not sound like anything except the inverter is connected to the battery. No charge controller or accessories are needed for ac coupling. In an AC coupled system the inverter/charger is connected to the grid all the time and should be in Float mod

Re: [RE-wrenches] Magnum System - Discharged Battery Bank

It is important to remember even the inverter will draw some DC from the battery in the "OFF" mode. Typically it's like 150ma or so which would take a long time to discharge a large bank. Also the inverter would completely turn off astound 5v, 10v and 20v respectively for 12v, 24v and 48v models

Re: [RE-wrenches] Generac QT series

Hi Mac, Jay just had the same issue and it was 120v from the gen instead of 120/240. The inverter was charging using half the windings causing it to Overtemp. Check the 60A breakers on the side of the inverter. Also make sure to remove the wires from the input terminal block before measuring vol

Re: [RE-wrenches] Magnum Back Plates

Mac, You should be able to add another BP-S next to the existing unit and just “add on” without taking anything existing apart. There is also a BP-MMP which only fits the Magnum mini panel and will not add on to the BP-S. If you look on the website you will see the difference in the mounting fla

Re: [RE-wrenches] Aqueous Hybrid Ion batteries

We have been asked to lower the DC input voltage to take advantage of these batteries. What engineering is saying is we can't go low enough on the low side and still produce peak AC voltage. Seems these batteries are catching on might need to revisit this again. Gary Baxter Product Manager Magn

Re: [RE-wrenches] LBX with Magnum?

Hi Jeremy, I think you are talking about two different things here. LBX mode in the SW was for connecting to an AC input which is the same using Connect VDC with the Magnum. I think what you are referring to here is the cut in voltage after a low battery cutout. On all Magnum inverters the VDC

Re: [RE-wrenches] magnum question

catalogue them on the IPAD and I take that to every installation. I have dozens of manuals on the IPAD, and as long as I take the time to download them and catalogue them they are always available to me. On Mon, Nov 3, 2014 at 12:26 PM, Baxter, Gary mailto:gbax...@sensata.com>> wrote: Hi Chris,

Re: [RE-wrenches] magnum question

Jay, Another good idea. We have thought about a "quick start" guide including the menu map, does that sound like it would work for most? I know that's what my new Cannon printer came with and when I had a wireless programming question I had to go online for the full manual. Gary From: RE-wrenc

Re: [RE-wrenches] magnum question

gy.com A Sensata Technologies Business Unit -----Original Message- From: Baxter, Gary Sent: Thursday, October 23, 2014 9:50 PM To: RE-wrenches Subject: Re: [RE-wrenches] magnum question Hi Jay, Sorry you didn't get help. Let me know what you need and I will get you an answer. Gary Baxte

Re: [RE-wrenches] magnum question

Hi Jay, Sorry you didn't get help. Let me know what you need and I will get you an answer. Gary Baxter Product Manager Magnum/Dimensions > On Oct 23, 2014, at 9:19 PM, jay peltz wrote: > > HI All, > > Does anyone have a person at Magnum in engineering or higher up than tech > support. > >