How remote? I have just picked up a consignment Sw4024 remote with cable.
Interested?
I don’t think that there’s a remote switch option other than this.
Allan
> On Nov 12, 2021, at 12:17 PM, Dana Orzel wrote:
>
>
> Oh Wise Older Ones!
>
> I have a client that wants to be able to turn off
Oh Wise Older Ones!
I have a client that wants to be able to turn off his SW4024 remotely, say
with a 2 wire single gang switch?
I cannot remember & it does not appear in the manual he has as to how this
can happen.
Any memories or suggestions?
Dana Orzel
gt; Sunstruck Consulting
>
>
>
>
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows 10
>
>
>
> *From: *Steve Romo
> *Sent: *Wednesday, April 14, 2021 7:23 AM
> *To: *RE-wrenches
> *Subject: *[RE-wrenches] SW4024
>
>
&
If the terminal blocks have #s then he would use block #7 and use the com. &
NO contacts. 3 terminals; com, NO & NC
> On Apr 14, 2021, at 7:23 AM, Steve Romo
> wrote:
>
> Hello Wrenches,
> I have a customer with a very old (1995) Xantrex SW4024. He is trying to
> connect the two wire start
Hello Wrenches,
I have a customer with a very old (1995) Xantrex SW4024. He is trying to
connect the two wire start to his generator. This unit has two sets of
terminal blocks instead of the relay spade connectors I'm used to. Does
anyone know or have an old manual that shows which ones to use? I
Hello Bob,
Voltage and frequency will have a greater affect on whether the converter
powers on. Waveform distortion under load may affect the converter but I have
seen many types of loads working fine with some nasty looking AC waveforms.
Larry Crutcher
> On Jun 5, 2020, at 2:08 PM, RE
I don't know about a Bolt, but we've successfully charged a customer's
Chevy Volt from an SW inverter for several years.
Ray Walters
Remote Solar
303 505-8760
On 6/5/20 5:07 PM, RE Ellison wrote:
Has anybody ever tried to charge a Chevy bolt with an SW 4024 ?
I don’t know if it would be
Has anybody ever tried to charge a Chevy bolt with an SW 4024 ?
I don’t know if it would be happy with the way form or not and I’m hoping
somebody has toyed with it !
Thanks
Bob Ellison
___
List sponsored by Redwood Alliance
List Address:
(5) SW4024 change outs last year, they just wore out.
Dana Orzel
Great Solar Works, Inc - NABCEP # 051112-136
E - d...@solarwork.com - Web - solarwork.com
O - 970.626.5253 C - 208.721.7003 - No FAX Line
Daryl- I do have a functional 4024 available. Please contact me off-list.
Kirk Herander
VSE
On Jan 19, 2015, at 2:50 PM, Dan Tittmann dan...@greenwired.com wrote:
unfortunately these great inverters after years and years of service are
dropping like flies. Often the chargers go first
unfortunately these great inverters after years and years of service are
dropping like flies. Often the chargers go first then We have be
replacing them with Magnum MS 4024 as the price of a new inverter is only
slightly higher than the cost shipping and repairing the old and it can be
done
Hi all,
I know this is a real shot in the dark, but is there a possibility
someone out there has an SW4024 for sale. I have an off grid client
whose has a major issue. Because they are off grid, they do not want to
send the inverter off to be fixed and have to run their generator for a
couple
Wrenches,
A longtime off grid customer with a 1997-era Trace SW4024 and a
Kohler 8.5RMY backup generator (with 1,800 hours over 16 years) has
never had an inverter failure, but requested my assistance with a
recent development. His generator has been set up on automatic
I thought the relays on the SWs were sealed, so visible arcing sounds
bad. Are you sure its not a loose connection?
Also on the batteries, anytime I've ever seen someone replace just a
couple of cells in a bank that old, it never ended well. It was like
that gopher stomping game, and you hit
Ray,
Yes, I know...
Doesn't ten years seem a bit weak on a set of Surrette's best? And
the other ten cells are remarkably even. If replacement (which is
already being arranged by Surrette in a good way) gives 3-5 more
years, even with keeping a close
I've not had good luck on Surrette 5000s actually. We had a set that
was really problematic early on with battery voltage temporarily
dropping below the inverter lo volt shut off, when a well pump was
started. They have amp hours rated at the 100 hr rate, and they seem to
behave as expected
Systems(802)-483-2564www.Foxfire-Energy.comNABCEP #092907-44
Original Message
Subject: Re: [RE-wrenches] SW4024 relay spark issue
From: Ray Walters r...@solarray.com
Date: Mon, November 18, 2013 8:59 pm
To: al...@positiveenergysolar.com, RE-wrenches
re-wrenches@lists.re-wrenches.org
/2013 05:01 AM Subject: Re:
[RE-wrenches] SW4024 RY8 Sent by:
re-wrenches-boun...@lists.re-wrenches.org
--
Hi Eric,
Are you aware of any of your Authorized Inverter Repair Facilities that
are doing component level replacement on pricey or even discontinued
Mac:
I pulled the cover off a defunct SW in the shop to determine how this might be
done. It is doable if you know how to work on printed circuit boards.
There is an art and a science to this type of repair and if you mess up the
consequences are dire. I've had experience with PCB rework so I
the environment before printing this e-mail
From: Bill Loesch solar1onl...@charter.net
mailto:solar1onl...@charter.net
To: RE-wrenches re-wrenches@lists.re-wrenches.org
mailto:re-wrenches@lists.re-wrenches.org
Date: 07/25/2013 05:01 AM
Subject:Re: [RE-wrenches
Lee:
I have been installing and repairing SW inverters for decades but I admit
complete ignorance, until now, of the MC version units. In case you need
resources, below are some:
MC2 Supplement 1:
Exclusive manufacturer of
[cid:rollsa2c986]http://www.rollsbattery.com
From: William Miller
Sent: Friday, June 21, 2013 10:17 AM
To: i...@solarplexus1.com
Reply To: RE-wrenches
Cc: RE-wrenches
Subject: Re: [RE-wrenches] Sw4024
Lee:
I have been installing and repairing SW inverters for decades but I
From: Allan Sindelar al...@positiveenergysolar.com
To: RE-wrenches re-wrenches@lists.re-wrenches.org
Sent: Fri, October 30, 2009 6:05:00 PM
Subject: [RE-wrenches] SW4024 compatibility question
Esteemed
Wrenches:
Wrench
esoterica time… another contest like Mick’s to win the chance
I have an early vintage SW unit (which is overdue for retirement but refuses
to break...)
Those early models had to be physically removed from the wall to get the
cover off, so a chipset replacement was difficult. Then Series II came out
(which can be identified by the easier method for removing
Allan,
Yes, probably. However
IF your very early inverter has a serial # 50 or so, there was a
board issue and it will not stack unless that board was changed out.
They got most of them but not all. :)
Bob-O
On Oct 30, 2009, at 6:05 PM, Allan Sindelar wrote:
Esteemed Wrenches:
Wrench
Friends:
FWIW, I have synced a 4048 with a 5548. It seemed to work fine up until
the customer refused to pay me and then I lost interest!
William
At 07:59 AM 10/31/2009, you wrote:
I have an early vintage SW unit (which is overdue for retirement but
refuses to break...)
Those early
Esteemed Wrenches:
Wrench esoterica time. another contest like Mick's to win the chance to take
time off.
A customer has a late-2005 SW4024 with Rev. 4.30 firmware. He needs to add a
second inverter for series stacking to increase output to run a big well
pump. We have an early SW4024 with
Allan
Ask Greg Thomas at Outback. He wrote the software.
David
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825-1200
Fax (707) 825-1202
dk...@aeesolar.com mailto:da...@aeesolar.com
www.aeesolar.com http://www.aeesolar.com/
28 matches
Mail list logo
