There is going to be a difference in coverage between the 408 (6.6 db) and
420 (9.2 db) Not sure what gain is for 440-450 since DB did not make
antenna for this segment. Maybe special order.
We've seen world of difference between high antennas from 4 bay to 8 bay.
Some say only 3 db, but with
Hello All,
You can still get it in the 440 to 450 range.
Some of the dealers buy 50 of the antennas at a time
and then stock them for us Hams.
Both the 404, 408 and the 420. by DB products.
There is one such dealer listed in the vendor files here on RB.
Good luck and 73,
Russ, W3CH
- Original
I checked ALL the files and did not see the one such dealer. Can
you
direct me to his website [URL]. I want to get some specs on the two
antennas PLUS...the current expected cost to purchase. Thanks!!
Doug W7FDF
Vail, Arizona
--- In Repeater-Builder@yahoogroups.com, Russ Stafford [EMAIL
I'm in the process of ordering one (DB408) for my project from Cook
Towers...
http://www.repeater-builder.com/cook-towers/
Mark - N9WYS
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Doug W7FDF
Sent: Wednesday, July 20, 2005 10:39 AM
To:
Does some one have a manual that I might use? Here is the idea that I
have. I would Scan it into a Adobe .pdf doucument and return along
with a CD of scans. Maybe this is too big of an undertaking? I have
never seen a manual. Maybe this is something that I shouldn't do.
Don't know. But I have
--- In Repeater-Builder@yahoogroups.com, Bruce Nanney [EMAIL PROTECTED]
wrote:
Does anybody have a web site to look at IOTA power supply?
It's http://www.iotaengineering.com/
I've had a 45A IOTA +IQ4 maintaining 2 #29 sealed batteries that power
the entire ham shack for over 2 years now with not
--- In Repeater-Builder@yahoogroups.com, Steve [EMAIL PROTECTED] wrote:
...I have purchaced a R100 and need to set it up on Ham Bands...
While you are looking for a manual - here is some reading to get you
started on how to
Second best $$ I ever invested
That might lead one to believe your wife would require you to say your
First best $$ I ever invested . was for a marriage license :-))
Larry
- Original Message -
From: Bill Powell [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent:
Has anybody change out the receiver on MOTOROLA MICOR radio ? a non-
MOTOROLA MICOR receiver or put the receiver in a rf shielded use Feed
Thru Through Capacitors area outside the radio of MOTOROLA MICOR ? A
model talking about this T43RTA any suggestions would be appreciated
if anybody
On the DB408 and DB420 Tessco has them for:
DB404 450-470, 2 bay list$270.00 their price $203.85
DB408 450-470, 4 bay list$474.00 their price $358.63
DB420 450-470, 8 bay list$1085.00their price $819.18
Don't know about 440-450 version.
Tesdco at
Just call toll free (877)992-2665
I got the number from the vendor file.
73 Russ
- Original Message -
From: Doug W7FDF [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, July 20, 2005 11:38 AM
Subject: [Repeater-Builder] Re: DB408 vs. DB420
I checked ALL the files
Hi, Steve.
I'm, pretty sure thatI have a "digitized" version of the R-100 manual at home... I'll have to check to see where it is. If it's on my main computer, it may take some time to get to it again - I've had a MAJOR problem with McAfee antivirus, and I'm starting from scratch with a fresh
It would be great if you had it. I am Coordinated
here in Central Florida for 444.450 and this will be my First
repeater.
3"s
Steve
K4SLB
- Original Message -
From:
Mark Tomany
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, July 20, 2005 4:09
PM
Mike,
Did you ever find someone to scan the LBIs for you? I think I
have a way to get them scanned. If you're still looking for a place
to have them scanned, please contact me off list.
73,
Rich
N0OHO
rlhaan (at) netins.net
[EMAIL PROTECTED] 07/09/05 5:29 PM
I received an email that
Mike,
Did you ever find someone to scan the LBIs for you? I think I
have a way to get them scanned. If you're still looking for a place
to have them scanned, please contact me off list.
73,
Rich
N0OHO
rlhaan (at) netins.net
On Sat, 09 Jul 2005 15:29:08 -0700, Mike Morris WA6ILQ
[EMAIL
At 01:32 PM 7/20/05, you wrote:
Mike,
Did you ever find someone to scan the LBIs for you? I think I
have a way to get them scanned. If you're still looking for a place
to have them scanned, please contact me off list.
73,
Rich
N0OHO
rlhaan (at) netins.net
Not yet, and several comments
where in Florida are
you?
John
- Original Message -
From:
K4SLB Steve Butler
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, July 20, 2005 4:38
PM
Subject: Re: [Repeater-Builder] Looking
for Motorola Radius R100 Service Manual
It would be
Tessco does not have the 440 to 450.
I called them today and spoke to a Mark Neilon
with Tessco he told me the only dealer that still stocks
DB in the Ham bands. He said they still have the two meter DB but when they
sell the rest of the ones in stock that is it for any Ham bands. They will
not
Tell us more details of what you have on your mind of
doing. Most of the different frequency band receiver
boards for the micors are interchangeable. ie you
could make a cross band repeater by using a vhf lo
band receiver along with a vhf hi or uhf exciter and
vice versa. As far as placing a
I am in Kissimmee;
Are you in Florida?
- Original Message -
From:
Maire-Radios
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, July 20, 2005 5:39
PM
Subject: Re: [Repeater-Builder] Looking
for Motorola Radius R100 Service Manual
where in Florida
Anthony,
I've worked with a few micors and replacing the receiver is simply remove
the old one, insert the new one and tune.
For stand alone I prefer the micor receiver housing. Usually have to build
a power supply for the receiver wants 9.6 and 13.8 volts. If you are
connecting to unified
Hi, I would like to get some information on how to tune up a VXR5000
UHF repeater. Can someone please email me or reply to the group on how
to setup/tuneup one of these units.
Thanx
Ken
Yahoo! Groups Links
* To visit your group on the web, go to:
Where can I find 6 meters Crystals for a GE Master II .
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
Kissimmee, Florida just south Of
Orlando
- Original Message -
From:
K4SLB Steve Butler
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, July 20, 2005 6:01
PM
Subject: Re: [Repeater-Builder] Looking
for Motorola Radius R100 Service Manual
I am in
Depending on the method used to convert your Micor to a repeater and
type of control (controller) used, you *may* not need anything but a
Station Control Module.
Although written more so for the Unified Chassis, the information
provided can also be used with a Non Unified Chassis:
Are already have a quiet receiver and very good Sensitivity MOTOROLA
MICOR radio VHF but occasionally have problem with RF getting back in
to receiver ended only happen at night and not every night when
they're GOOD conditions repeater RF feedback gets in The receiver the
antenna is 175 feet
At 12:58 AM 7/21/2005 -, you wrote:
Are already have a quiet receiver and very good Sensitivity MOTOROLA
MICOR radio VHF but occasionally have problem with RF getting back in
to receiver ended only happen at night and not every night when
they're GOOD conditions repeater RF feedback gets in
Clearwater
- Original Message -
From:
K4SLB Steve Butler
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, July 20, 2005 8:30
PM
Subject: Re: [Repeater-Builder] Looking
for Motorola Radius R100 Service Manual
Kissimmee, Florida just south Of
it SQUEALING like it hereing a signal but it's not!this makes sense ??
Anthony w4ncr
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use
http://www.westcrystal.com/index2.html
From: gary [EMAIL PROTECTED]
Reply-To: Repeater-Builder@yahoogroups.com
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] crystals
Date: Thu, 21 Jul 2005 00:26:14 -
Where can I find 6 meters Crystals for a GE Master II .
Yahoo!
Hi everyone. I am new to GMRS Repeaters and I was wondering what is
needed to setup a basic repeater for a beginner. Also, about how much
would it cost, what parts are needed, and where can I purchase them.
Thanks in advance.
--
Nick
Yahoo! Groups Links
* To visit your group on the
Sounds like intermod.
Dave Baughn
Director of Engineering
The University of Alabama
Center for Public Television and Radio
Box 870150
Tuscaloosa, Alabama 35487
205.348.8622 cell 205-310-8798
NEW EMAIL [EMAIL PROTECTED]
[EMAIL PROTECTED] 07/20/05 08:37PM
it SQUEALING like it hereing a signal
Hmmm,sounds like a band opening to a reverse split repeater. Could be
conditions! Happened to me before...search the repeater directory!
Ken Arck wrote:
At 12:58 AM 7/21/2005 -, you wrote:
Are already have a quiet receiver and very good Sensitivity MOTOROLA
MICOR radio VHF but
How's it going up there?
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
International Crystal
-- Original Message --
Received: Wed, 20 Jul 2005 07:41:22 PM CDT
From: gary [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] crystals
Where can I find 6 meters Crystals for a GE Master II .
Yahoo! Groups Links
Anthony
If you haven't changed anything since it worked right---tighten all co-ax
connectors before you do anything else---a loose connector in either the
transmitter or receiver lines to the duplexer can be the cause of problems
just as you describe. Good luck.
Scott, N6NXI
- Original
Get a receiver and go off of your input channel either up or down by
10.7, 10.8 or 11.7MHz and tell me what you hear.
On 7/20/05, Scott [EMAIL PROTECTED] wrote:
Anthony
If you haven't changed anything since it worked right---tighten all co-ax
connectors before you do anything else---a loose
37 matches
Mail list logo