Hi,
This is a 'normal' feature of the 210. It has no influence on any
operation. Seems to affect port 1 only.
73 de Doug - GM7SVK
--- In Repeater-Builder@yahoogroups.com, DCFluX dcf...@... wrote:
Try a diode between the PTT line and the repeater.
On Thu, Jan 22, 2009 at 8:06 PM, Glenn
Read it again --- he said 1,000 watt
- Original Message -
From: Bill Smith
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, January 29, 2009 12:28 PM
Subject: RE: [Repeater-Builder] Iso-coupler
1,000 foot AM tower?
--- On Wed, 1/28/09, Jeff DePolo j...@broadsci.com wrote:
Norm, I wrote a little prg./ utility to change the freq. data
in the KPG59D programming software.. How it works is, you program
a freq. in the 40.xxx-43.yyy mhz range.. Save the file, exit
KPG59D and then run that file through my program KWLB2HAM prg.
Start KPG59D again and read the file back in
What do you have cabled to the port ?
At 01:40 AM 01/30/09, you wrote:
Hi,
This is a 'normal' feature of the 210. It has no influence on any
operation. Seems to affect port 1 only.
73 de Doug - GM7SVK
--- In
mailto:Repeater-Builder%40yahoogroups.comRepeater-Builder@yahoogroups.com,
DCFluX
I'm looking for contact info for Jesse Marroquin K5JXM in Plano Texas.
Mike WA6ILQ
NORM KNAPP nknapp@ wrote:
Hi Skipp
I work for a Kenwood shop. I have installed dozens of
TK-6110's. I tried to get one to program into 6m, but
the software wouldn't let me. How do you do it?
73 de N5NPO
Hi Norm,
I'm also a Kenwood Dealer but aside from the resources of the
Mike, from the Internet...
73 John VE3AMZ
Jesse Marroquin
2312 Senna Hills Ln
Plano, TX 75025-4786
(972) 396-5807
- Original Message -
From: Mike Morris WA6ILQ wa6...@gmail.com
To: Repeater-Builder@yahoogroups.com
Sent: Friday, January 30, 2009 11:18 AM
Subject: [Repeater-Builder]
Re: Radios for easy VHF 29 to 54 MHz Low Band operation
Repeater Projects
Dean Endicott dean.endic...@... wrote:
How about a GE delta low band. There programmable with
128 channels w/990 control head. 90- 100 watts and they
tune fairly easy, no modifications.
Dean.
Hi Dean,
I have an NHRC-7 controller I've been fiddling with for a while...
2 ports - one is a Motorola GR1225 repeater fed off of the 16 pin accessory
cable; second is a Mastr II repeater station fed from the back control shelf
terminals.
Both repeaters, regardless of which port they're connected to,
Glenn Maclean wa7...@... wrote:
I am putting a 220 repeater together using an ICOM IC-RPP2210. The
repeater is working except the PTT LED remains illuminated
all the time. It goes ever so slightly brighter when the
repeater is keyed up. I measure 1.56 volts dc at the PTT line
between
I have 1 or 2 of the Delta's left. I retuned some and then was able to program
the chip in the 990 control head using the GE suitcase programmer. When you
enter a freq on the suitcase programmer, you need to hit Insert instead of
Enter. The Delta were really easy to retune without any
Motorola Syntor X 9000. 29-54 MHz near bullet proof. One of the best
radios Moto ever made.
Ken
--- In Repeater-Builder@yahoogroups.com, Dean Endicott
dean.endic...@... wrote:
I have 1 or 2 of the Delta's left. I retuned some and then was able
to program the chip in the 990 control head
Greetings all,
I'm looking for a mobile rig that is 2m/70cm and does crossband. Need not new,
just excellent working condition, outside can show signs of wear, doesn't even
need to have a mic or built in diplexer. Going to use strictly as cross band
radio.
this seems to be the least expensive
I would be extremely pissed off if someone published my personal info on a
public board in this manor.
Chris Carruba (WQIK389)
CompuTec Data Systems
Custom Written Software,
Networking, Forensic Data Recovery
From: John J. Riddell ve3...@earthlink.net
how about Bristol Ferry Road.
you gave it away when you gave out your call sign to everyone.
and you would be extremely pissed.you could that the address and then look
up your tax info in the R.I. govt. info.
so please take care.
- Original Message -
From: Chris Carruba
And then someone can go to Whitepages.com, find your phone number 401
68x-xxx4 and if someone wanted to, call and say hi to your wife De
and ask how you felt about your x0th Birthday party.
Oh...and don't forget Google Earth or Mapquest where they can zoom in
on your house and see what kind
You've missed my point.. I put my call letters up, heck I put my real name up..
But.. the important issue is...
I am the one giving out my private details.. in this public setting.
not a unknown 3rd party...
Best Regards,
Chris Carruba (WQIK389)
CompuTec Data Systems
Custom Written
Chris, I guess I'm missing your point,too..
If Jesse agreed to have his info in an internet-accessible public database,
exactly what would he have to be pissed about?
This small mailing list is somehow more public than fcc.gov or qrz.com?
73,
Paul, AE4KR
(And yes, you're welcome to look me
I am sorry, if you are alive, even dead, pay/paid taxes, have/had a
Social Security Number, a drivers license, etc... your information is
out there in public.
Paul Plack wrote:
Chris, I guess I'm missing your point,too..
If Jesse agreed to have his info in an internet-accessible public
Cry a bunch of tears, build a bridge and get over it!
20 matches
Mail list logo
